1 # Makefile.in generated by automake 1.11 from Makefile.am.
4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
7 # This Makefile.in is free software; the Free Software Foundation
8 # gives unlimited permission to copy and/or distribute it,
9 # with or without modifications, as long as this notice is preserved.
11 # This program is distributed in the hope that it will be useful,
12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
18 # This is Makefile.am, which is proceed by automake
21 pkgdatadir = $(datadir)/@PACKAGE@
22 pkgincludedir = $(includedir)/@PACKAGE@
23 pkglibdir = $(libdir)/@PACKAGE@
24 pkglibexecdir = $(libexecdir)/@PACKAGE@
25 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
26 install_sh_DATA = $(install_sh) -c -m 644
27 install_sh_PROGRAM = $(install_sh) -c
28 install_sh_SCRIPT = $(install_sh) -c
29 INSTALL_HEADER = $(INSTALL_DATA)
30 transform = $(program_transform_name)
37 build_triplet = @build@
39 subdir = docs/html-docs
40 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
41 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
42 am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
43 $(top_srcdir)/configure.ac
44 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
46 mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
47 CONFIG_HEADER = $(top_builddir)/config.h
49 CONFIG_CLEAN_VPATH_FILES =
52 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
53 html-recursive info-recursive install-data-recursive \
54 install-dvi-recursive install-exec-recursive \
55 install-html-recursive install-info-recursive \
56 install-pdf-recursive install-ps-recursive install-recursive \
57 installcheck-recursive installdirs-recursive pdf-recursive \
58 ps-recursive uninstall-recursive
59 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
60 am__vpath_adj = case $$p in \
61 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
64 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
66 am__nobase_strip_setup = \
67 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
69 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
70 am__nobase_list = $(am__nobase_strip_setup); \
71 for p in $$list; do echo "$$p $$p"; done | \
72 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
73 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
74 if (++n[$$2] == $(am__install_max)) \
75 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
76 END { for (dir in files) print dir, files[dir] }'
78 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
79 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
80 am__installdirs = "$(DESTDIR)$(htmldir)"
82 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
83 distclean-recursive maintainer-clean-recursive
84 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
85 $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
89 DIST_SUBDIRS = $(SUBDIRS)
90 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
93 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
94 sed_rest='s,^[^/]*/*,,'; \
95 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
96 sed_butlast='s,/*[^/]*$$,,'; \
97 while test -n "$$dir1"; do \
98 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
99 if test "$$first" != "."; then \
100 if test "$$first" = ".."; then \
101 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
102 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
104 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
105 if test "$$first2" = "$$first"; then \
106 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
110 dir0="$$dir0"/"$$first"; \
113 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
118 AUTOCONF = @AUTOCONF@
119 AUTOHEADER = @AUTOHEADER@
120 AUTOMAKE = @AUTOMAKE@
123 CCDEPMODE = @CCDEPMODE@
126 CPPFLAGS = @CPPFLAGS@
127 CYGPATH_W = @CYGPATH_W@
137 INSTALL_DATA = @INSTALL_DATA@
138 INSTALL_PROGRAM = @INSTALL_PROGRAM@
139 INSTALL_SCRIPT = @INSTALL_SCRIPT@
140 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
144 LTLIBOBJS = @LTLIBOBJS@
145 MAKEINFO = @MAKEINFO@
149 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
150 PACKAGE_NAME = @PACKAGE_NAME@
151 PACKAGE_STRING = @PACKAGE_STRING@
152 PACKAGE_TARNAME = @PACKAGE_TARNAME@
153 PACKAGE_URL = @PACKAGE_URL@
154 PACKAGE_VERSION = @PACKAGE_VERSION@
155 PATH_SEPARATOR = @PATH_SEPARATOR@
157 PTHREAD_CC = @PTHREAD_CC@
158 PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
159 PTHREAD_LIBS = @PTHREAD_LIBS@
160 SET_MAKE = @SET_MAKE@
164 abs_builddir = @abs_builddir@
165 abs_srcdir = @abs_srcdir@
166 abs_top_builddir = @abs_top_builddir@
167 abs_top_srcdir = @abs_top_srcdir@
168 ac_ct_CC = @ac_ct_CC@
169 am__include = @am__include@
170 am__leading_dot = @am__leading_dot@
171 am__quote = @am__quote@
173 am__untar = @am__untar@
176 build_alias = @build_alias@
177 build_cpu = @build_cpu@
178 build_os = @build_os@
179 build_vendor = @build_vendor@
180 builddir = @builddir@
181 built_with_posix_threads = @built_with_posix_threads@
182 compiled_with_cflags = @compiled_with_cflags@
183 compiled_with_compiler = @compiled_with_compiler@
185 datarootdir = @datarootdir@
188 exec_prefix = @exec_prefix@
190 host_alias = @host_alias@
191 host_cpu = @host_cpu@
193 host_vendor = @host_vendor@
194 htmldir = $(datadir)/atlc/docs/html-docs
195 includedir = @includedir@
197 install_sh = @install_sh@
199 libexecdir = @libexecdir@
200 localedir = @localedir@
201 localstatedir = @localstatedir@
204 oldincludedir = @oldincludedir@
207 program_transform_name = @program_transform_name@
210 sharedstatedir = @sharedstatedir@
212 sysconfdir = @sysconfdir@
213 target_alias = @target_alias@
214 top_build_prefix = @top_build_prefix@
215 top_builddir = @top_builddir@
216 top_srcdir = @top_srcdir@
218 html_DATA = IMPORTANT.html \
221 an_example_of_using_design_coupler.html \
226 calculate_zodd_and_zeven.html \
229 create_bmp_for_circ_in_circ.1.html \
230 create_bmp_for_circ_in_rect.1.html \
231 create_bmp_for_rect_cen_in_rect.1.html \
232 create_bmp_for_rect_in_circ.1.html \
233 create_bmp_for_rect_in_rect.1.html \
234 create_bmp_for_stripline_coupler.1.html \
235 create_bmp_for_symmetrical_stripline.1.html \
236 create_bmp_for_rect_cen_in_rect_coupler.1 \
237 design_coupler.1.html \
238 determine_dimensions_of_couplers.html \
242 generate_for_coupler.html \
256 usage_design_coupler.html \
259 EXTRA_DIST = BUGS.html \
264 an_example_of_using_design_coupler.html \
269 calculate_zodd_and_zeven.html \
272 create_bmp_for_circ_in_circ.1.html \
273 create_bmp_for_circ_in_rect.1.html \
274 create_bmp_for_rect_cen_in_rect.1.html \
275 create_bmp_for_rect_in_circ.1.html \
276 create_bmp_for_rect_in_rect.1.html \
277 create_bmp_for_stripline_coupler.1.html \
278 create_bmp_for_symmetrical_stripline.1.html \
279 create_bmp_for_rect_cen_in_rect_coupler.1 \
280 design_coupler.1.html \
281 determine_dimensions_of_couplers.html \
285 generate_for_coupler.html \
300 usage_design_coupler.html
307 $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
309 case '$(am__configure_deps)' in \
311 ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
312 && { if test -f $@; then exit 0; else break; fi; }; \
316 echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/html-docs/Makefile'; \
317 $(am__cd) $(top_srcdir) && \
318 $(AUTOMAKE) --gnu docs/html-docs/Makefile
320 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
323 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
325 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
326 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
329 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
330 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
332 $(top_srcdir)/configure: $(am__configure_deps)
333 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
334 $(ACLOCAL_M4): $(am__aclocal_m4_deps)
335 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
336 $(am__aclocal_m4_deps):
337 install-htmlDATA: $(html_DATA)
339 test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
340 @list='$(html_DATA)'; test -n "$(htmldir)" || list=; \
341 for p in $$list; do \
342 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
344 done | $(am__base_list) | \
345 while read files; do \
346 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
347 $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
352 @list='$(html_DATA)'; test -n "$(htmldir)" || list=; \
353 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
354 test -n "$$files" || exit 0; \
355 echo " ( cd '$(DESTDIR)$(htmldir)' && rm -f" $$files ")"; \
356 cd "$(DESTDIR)$(htmldir)" && rm -f $$files
358 # This directory's subdirectories are mostly independent; you can cd
359 # into them and run `make' without going through this Makefile.
360 # To change the values of `make' variables: instead of editing Makefiles,
361 # (1) if the variable is set in `config.status', edit `config.status'
362 # (which will cause the Makefiles to be regenerated when you run `make');
363 # (2) otherwise, pass the desired values on the `make' command line.
364 $(RECURSIVE_TARGETS):
366 for f in x $$MAKEFLAGS; do \
369 *k*) failcom='fail=yes';; \
373 target=`echo $@ | sed s/-recursive//`; \
374 list='$(SUBDIRS)'; for subdir in $$list; do \
375 echo "Making $$target in $$subdir"; \
376 if test "$$subdir" = "."; then \
378 local_target="$$target-am"; \
380 local_target="$$target"; \
382 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
385 if test "$$dot_seen" = "no"; then \
386 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
389 $(RECURSIVE_CLEAN_TARGETS):
391 for f in x $$MAKEFLAGS; do \
394 *k*) failcom='fail=yes';; \
399 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
400 *) list='$(SUBDIRS)' ;; \
402 rev=''; for subdir in $$list; do \
403 if test "$$subdir" = "."; then :; else \
404 rev="$$subdir $$rev"; \
408 target=`echo $@ | sed s/-recursive//`; \
409 for subdir in $$rev; do \
410 echo "Making $$target in $$subdir"; \
411 if test "$$subdir" = "."; then \
412 local_target="$$target-am"; \
414 local_target="$$target"; \
416 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
418 done && test -z "$$fail"
420 list='$(SUBDIRS)'; for subdir in $$list; do \
421 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
424 list='$(SUBDIRS)'; for subdir in $$list; do \
425 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
428 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
429 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
430 unique=`for i in $$list; do \
431 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
433 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
434 END { if (nonempty) { for (i in files) print i; }; }'`; \
438 TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
439 $(TAGS_FILES) $(LISP)
442 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
443 include_option=--etags-include; \
446 include_option=--include; \
449 list='$(SUBDIRS)'; for subdir in $$list; do \
450 if test "$$subdir" = .; then :; else \
451 test ! -f $$subdir/TAGS || \
452 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
455 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
456 unique=`for i in $$list; do \
457 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
459 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
460 END { if (nonempty) { for (i in files) print i; }; }'`; \
462 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
463 test -n "$$unique" || unique=$$empty_fix; \
464 if test $$# -gt 0; then \
465 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
468 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
473 CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
474 $(TAGS_FILES) $(LISP)
475 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
476 unique=`for i in $$list; do \
477 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
479 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
480 END { if (nonempty) { for (i in files) print i; }; }'`; \
481 test -z "$(CTAGS_ARGS)$$unique" \
482 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
486 here=`$(am__cd) $(top_builddir) && pwd` \
487 && $(am__cd) $(top_srcdir) \
488 && gtags -i $(GTAGS_ARGS) "$$here"
491 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
493 distdir: $(DISTFILES)
494 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
495 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
496 list='$(DISTFILES)'; \
497 dist_files=`for file in $$list; do echo $$file; done | \
498 sed -e "s|^$$srcdirstrip/||;t" \
499 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
500 case $$dist_files in \
501 */*) $(MKDIR_P) `echo "$$dist_files" | \
502 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
505 for file in $$dist_files; do \
506 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
507 if test -d $$d/$$file; then \
508 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
509 if test -d "$(distdir)/$$file"; then \
510 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
512 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
513 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
514 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
516 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
518 test -f "$(distdir)/$$file" \
519 || cp -p $$d/$$file "$(distdir)/$$file" \
523 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
524 if test "$$subdir" = .; then :; else \
525 test -d "$(distdir)/$$subdir" \
526 || $(MKDIR_P) "$(distdir)/$$subdir" \
530 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
531 if test "$$subdir" = .; then :; else \
532 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
534 new_distdir=$$reldir; \
535 dir1=$$subdir; dir2="$(top_distdir)"; \
537 new_top_distdir=$$reldir; \
538 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
539 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
540 ($(am__cd) $$subdir && \
541 $(MAKE) $(AM_MAKEFLAGS) \
542 top_distdir="$$new_top_distdir" \
543 distdir="$$new_distdir" \
544 am__remove_distdir=: \
545 am__skip_length_check=: \
546 am__skip_mode_fix=: \
552 check: check-recursive
553 all-am: Makefile $(DATA)
554 installdirs: installdirs-recursive
556 for dir in "$(DESTDIR)$(htmldir)"; do \
557 test -z "$$dir" || $(MKDIR_P) "$$dir"; \
559 install: install-recursive
560 install-exec: install-exec-recursive
561 install-data: install-data-recursive
562 uninstall: uninstall-recursive
565 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
567 installcheck: installcheck-recursive
569 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
570 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
571 `test -z '$(STRIP)' || \
572 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
576 -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
579 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
580 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
581 -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
583 maintainer-clean-generic:
584 @echo "This command is intended for maintainers to use"
585 @echo "it deletes files that may require special tools to rebuild."
586 clean: clean-recursive
588 clean-am: clean-generic mostlyclean-am
590 distclean: distclean-recursive
592 distclean-am: clean-am distclean-generic distclean-tags
606 install-data-am: install-htmlDATA
608 install-dvi: install-dvi-recursive
614 install-html: install-html-recursive
618 install-info: install-info-recursive
624 install-pdf: install-pdf-recursive
628 install-ps: install-ps-recursive
634 maintainer-clean: maintainer-clean-recursive
636 maintainer-clean-am: distclean-am maintainer-clean-generic
638 mostlyclean: mostlyclean-recursive
640 mostlyclean-am: mostlyclean-generic
650 uninstall-am: uninstall-htmlDATA
652 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
653 install-am install-strip tags-recursive
655 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
656 all all-am check check-am clean clean-generic ctags \
657 ctags-recursive distclean distclean-generic distclean-tags \
658 distdir dvi dvi-am html html-am info info-am install \
659 install-am install-data install-data-am install-dvi \
660 install-dvi-am install-exec install-exec-am install-html \
661 install-html-am install-htmlDATA install-info install-info-am \
662 install-man install-pdf install-pdf-am install-ps \
663 install-ps-am install-strip installcheck installcheck-am \
664 installdirs installdirs-am maintainer-clean \
665 maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
666 pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
670 # Tell versions [3.59,3.63) of GNU make to not export all variables.
671 # Otherwise a system limit (for SysV at least) may be exceeded.