1 .\" Hey, EMACS: -*- nroff -*-
2 .\" First parameter, NAME, should be all caps
3 .\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
4 .\" other parameters are allowed: see man(7), man(1)
5 .TH UAPUTL 1 "July 20, 2011"
6 .\" Please adjust this date whenever revising the manpage.
8 .\" Some roff macros, for reference:
9 .\" .nh disable hyphenation
10 .\" .hy enable hyphenation
11 .\" .ad l left justify
12 .\" .ad b justify to both left and right margins
13 .\" .nf disable filling
14 .\" .fi enable filling
15 .\" .br insert line break
16 .\" .sp <n> insert n+1 empty lines
17 .\" for manpage-specific macros, see man(7)
19 uaputl \- configure Marvell uAP wireless driver
26 This manual page documents briefly the
28 command, which is used to configure the device driver for Marvell's
29 uAP wireless interface.
33 Enable debugging output, level can be 0, 1, or 2.
36 Show summary of options and commands.
39 Select interface to configure.
42 Show version of program.
44 For more information on the usage of each command use:
45 uaputl.exe <command> --help
66 Display list of clients
68 .B sys_cfg_ap_mac_address
69 Set/get uAP mac address
74 .B sys_cfg_beacon_period
75 Set/get uAP beacon period
77 .B sys_cfg_dtim_period
78 Set/get uAP dtim period
81 Set/get uAP radio channel
83 .B sys_cfg_scan_channels
84 Set/get uAP radio channel list
90 Set/get uAP rates (extended)
95 .B sys_cfg_bcast_ssid_ctl
96 Set/get uAP broadcast ssid
98 .B sys_cfg_preamble_ctl
101 .B sys_cfg_antenna_ctl
102 Set/get uAP tx/rx antenna
104 .B sys_cfg_rts_threshold
105 Set/get uAP rts threshold
107 .B sys_cfg_frag_threshold
108 Set/get uAP frag threshold
111 Set/get uAP radio on/off
113 .B sys_cfg_tx_data_rate
116 .B sys_cfg_mcbc_data_rate
117 Set/get uAP MCBC rate
119 .B sys_cfg_rsn_replay_prot
120 Set/get RSN replay protection
122 .B sys_cfg_pkt_fwd_ctl
123 Set/get uAP packet forwarding
125 .B sys_cfg_sta_ageout_timer
126 Set/get station ageout timer
129 Set/get uAP authentication mode
132 Set/get uAP security protocol
138 Set/get uAP WPA/WPA cipher
140 .B sys_cfg_wpa_passphrase
141 Set/get uAP WPA or WPA2 passphrase
143 .B sys_cfg_group_rekey_timer
144 Set/get uAP group re-key time
146 .B sys_cfg_max_sta_num
147 Set/get uAP max station number
149 .B sys_cfg_retry_limit
150 Set/get uAP retry limit number
153 Set/get custom IE configuration
156 Set/get uAP mac filter
159 Read/Write register command
162 Read/Write to a memory address command
168 Get/Set configuration file from/to firmware
171 Set/Get debug parameter
180 Set/get uAP power mode
183 Set/get uAP BT coex configuration
188 This manual page was written by Bdale Garbee <bdale@gag.com>,
189 for the Debian project (and may be used by others).