1 altos (0.6+236+gcd8aa79) unstable; urgency=low
4 * Telemetry code was mis-computing RSSI
5 * Switch DBG pins to GPIO when using any debug commands. Reboot to
9 * significant documentation update
10 * add build dep for sndfile
11 * reflect documentation file name change
12 * update to latest Debian standards version
14 -- Bdale Garbee <bdale@gag.com> Tue, 20 Jul 2010 22:24:14 -0600
16 altos (0.6+224+g4766b13) unstable; urgency=low
19 * documentation updates from Bob
22 * Extension to KML output format, and minor bug fix
25 * ao-view: disable radio telemetry monitoring during channel change
26 * Add special code for USB panic's.
27 * ao-postflight: was walking off state.data array
28 * Abort any in-progress radio operation when changing radio channel
30 -- Bdale Garbee <bdale@gag.com> Thu, 24 Jun 2010 12:37:34 -0700
32 altos (0.6+214+g16c4cae) unstable; urgency=low
35 * updates including a typo fix from Bob Finch to the PKGBUILD-git.altos
36 * merge a derivative of Bob Finch's mere mortals guide as getting started
37 * merge the altusmetrum-themes package
40 * Fix telemetrum.inf, tested by Adrian and Keithp
41 * Finish basic flight monitoring UI with voice using FreeTTS
43 -- Bdale Garbee <bdale@gag.com> Tue, 18 May 2010 00:24:40 -0600
45 altos (0.6+204+g6bd8513) unstable; urgency=low
47 * lose the quotes since they apparently aren't necessary
49 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 19:53:58 -0600
51 altos (0.6+202+gae6854d) unstable; urgency=low
53 * update desktop file for conformance with current standards
55 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 17:04:31 -0600
57 altos (0.6+200+g68eaaa6) unstable; urgency=low
59 * add initial package build scripts for Arch Linux from Bob Finch
60 * add desktop file provided by Bob Finch
62 -- Bdale Garbee <bdale@gag.com> Wed, 12 May 2010 16:44:27 -0600
64 altos (0.6+195+gcde60f1) unstable; urgency=low
66 * Revert "Merge remote branch 'remotes/origin/fix-reset'"
68 -- Bdale Garbee <bdale@gag.com> Thu, 06 May 2010 13:59:16 -0600
70 altos (0.6+193+g314d27a) unstable; urgency=low
73 * Don't change dbg clock while changing reset_n. Use 20ms everywhere
75 -- Bdale Garbee <bdale@gag.com> Thu, 06 May 2010 12:47:51 -0600
77 altos (0.6+190+g8b6767e) unstable; urgency=low
80 * Fix all stdio reading functions to be __critical
81 * Use ao_delay to sleep for 2 seconds instead of trying ao_sleep
83 -- Bdale Garbee <bdale@gag.com> Wed, 05 May 2010 02:34:06 -0600
85 altos (0.6+187+g8702f49) unstable; urgency=low
88 * more text created during SFO->DEN flight
89 * initial attempt at a telemetrum turn on script .. needs work
92 * Revert "Add optional 's' command to packet slave to enable/disable
94 * Disable interrupts while reading from stdin
96 -- Bdale Garbee <bdale@gag.com> Wed, 05 May 2010 01:52:27 -0600
98 altos (0.6+180+g99094f0) unstable; urgency=low
101 * Increase reset switch time to 100ms
102 * Add optional 's' command to packet slave to enable/disable slave
104 * More ALtosUI changes
105 * Autodetect flite voice registration function
108 * capture work done on SFO->DEN flight
109 * add some RF usage information from an email reply sent today, and
112 -- Bdale Garbee <bdale@gag.com> Tue, 27 Apr 2010 00:17:57 -0600
114 altos (0.6+171+g9394393) unstable; urgency=low
120 * Only have the slave return a packet if it received one.
122 -- Bdale Garbee <bdale@gag.com> Sat, 10 Apr 2010 15:01:04 -0600
124 altos (0.6+168+gc0ee1ae) unstable; urgency=low
127 * INSTALL file changed by auto tools
130 * libflite may forget to reference libasound
132 -- Bdale Garbee <bdale@gag.com> Fri, 09 Apr 2010 00:08:24 -0600
134 altos (0.6+164+g5c3b6e2) unstable; urgency=low
137 * Start adding java-based UI
138 * Add telemetry data parsing code
139 * Add Windows install .inf file
140 * Fix windows install file
141 * Add telem parsing code
142 * Steal C code from ao-view
143 * Display table of flight info. gps is not working yet though
144 * Fix up table formatting
147 * Clean up GPS data formatting
148 * Report current gps nsat, not last locked nsat
149 * Remove GPS data missing from skytraq. Save max height/accel/speed
150 * Remove unused cell renderer class
152 * Use RXTX for serial comm. Add logdir preference saving
153 * Make ao_radio_idle keep trying to get the radio to idle.
154 * Don't abort the radio when enabling telemetry monitoring
155 * Clean up some altosui comments
156 * Switch TeleMetrum from v0.2 to v1.0
157 * Add Linux device discovery
158 * Interrupt running replay thread when starting another replay
159 * serial port read function cannot be interrupted. poll every 1 second
160 * TD reports "not-connected" when GPS has 0 sats
161 * Tasks may move in task structure as a result of ao_exit
162 * Enable telemetry monitoring
163 * Use 16-bit flite voice (which appears to have changed symbols
165 * When changing RESET line, delay 20ms
168 * choose a better set of docbook xsl files
170 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 19:56:27 -0600
172 altos (0.6+131+g6629ec5) unstable; urgency=low
174 * lose the url entirely for now
176 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:43:01 -0600
178 altos (0.6+129+g934434f) unstable; urgency=low
182 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:41:38 -0600
184 altos (0.6+127+g05ad583) unstable; urgency=low
186 * need another build dep
188 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:35:04 -0600
190 altos (0.6+125+g8f1d47e) unstable; urgency=low
193 * tweak copyright assertion
194 * crudely incorporate "day in the life" info from web page
195 * rewrite urls in docbook format
197 -- Bdale Garbee <bdale@gag.com> Thu, 08 Apr 2010 12:28:04 -0600
199 altos (0.6+119+g00f49c8) unstable; urgency=low
202 * update changelogs for Debian build
203 * move gbp.conf into debian/
204 * initial harness for documentation
208 * Round radio calibration value instead of truncating
209 * Document the ao-dumplog '--remote' flag for radio-link downloads
211 -- Bdale Garbee <bdale@gag.com> Tue, 30 Mar 2010 23:19:15 -0600
213 altos (0.6+108+g6e61170) unstable; urgency=low
216 * Need to duplicate new altitude conversion code in aoview.
218 -- Bdale Garbee <bdale@gag.com> Thu, 04 Mar 2010 17:33:27 -0700
220 altos (0.6+106+ga1478f6) unstable; urgency=low
223 * Add ao_radio_xmit to help test boards without flashing them.
224 * Allow product names to have suffixes (like board revisions)
225 * Fix and document the ao-rawload --run flag
227 * Leave .ihx files in the build directory too - easier to debug that way
228 * Eliminate deadlock when writing config from radio link
229 * Fix up LED colors for each product.
230 * Add .gitignore for ao-bringup
233 * create a turn on script for lighting up TeleDongle v0.2 boards
235 -- Bdale Garbee <bdale@gag.com> Sat, 27 Feb 2010 17:35:32 -0700
237 altos (0.6+95+g2f45953) unstable; urgency=low
239 * update changelogs for Debian build
240 * conditionalize use of git on executability of /usr/bin/git binary
242 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 17:30:00 -0700
244 altos (0.6+88+gdeccc10) unstable; urgency=low
246 * add gawk as a build dependency since strtonum is a gawk extension
248 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 16:44:35 -0700
250 altos (0.6+86+g2491282) unstable; urgency=low
253 * Disable monitor mode before attempting radio test.
254 * Ensure that ao_alarm waits at least the specified time
255 * Remove dbg driver code from telemetrum/teledongle
256 * Add AT45DBxx1D driver
257 * Remove green LED and temp sensor from v0.2 code
258 * Add at45db161d.h header file for new flash part.
259 * Add 'f' command to display flash status register contents
260 * Dump more flash parameters for the flash_status command
261 * Dump config block from read/write config and flash_status commands
262 * Don't set ao_flash_setup_done until we're actually done.
263 * Remove flash debugging printfs
264 * Add simple gps dump command 'g'
265 * Force idle mode by shorting the SPI clock to ground at boot time.
266 * Switch to using internal cc1111 temperature sensor
267 * Missing ao_mutex_put in gps_dump
268 * Compute daytime using GPS as time base
269 * Pull in a bit more data for filtering the start of the boost
270 * Log GPS data on pad after boost detect.
271 * Change barometer conversion code to shrink conversion table
272 * Change altos build process to support per-product compile-time
274 * Update .gitignore files
276 * Add back stack size checking to altos linking phase
277 * Must install .map files for ao-load to work
279 -- Bdale Garbee <bdale@gag.com> Wed, 24 Feb 2010 14:53:01 -0700
281 altos (0.6+60+g10d1bbc) unstable; urgency=low
284 * Use ao_radio_get/ao_radio_put in packet code.
286 -- Bdale Garbee <bdale@gag.com> Sat, 19 Dec 2009 13:53:32 -0700
288 altos (0.6+58+gbbb152c) unstable; urgency=low
291 * Re-order config values. Change frequency to cal
292 * Allow radio calibration to be set from ao-load
293 * Add --cal to man page
295 -- Bdale Garbee <bdale@gag.com> Sat, 19 Dec 2009 12:05:26 -0700
297 altos (0.6+53+gcd49847) unstable; urgency=low
300 * Remove send_serial and serial_baud commands.
301 * Make ao_cmd_decimal produce both 32 and 16 bit values.
302 * Add radio calibration configuration.
304 -- Bdale Garbee <bdale@gag.com> Sat, 05 Dec 2009 11:02:49 -0700
306 altos (0.6+49+g9a1d7dd) unstable; urgency=low
309 * Change default callsign to "N0CALL"
311 -- Bdale Garbee <bdale@gag.com> Fri, 04 Dec 2009 21:01:55 -0700
313 altos (0.6+47+g4053309) unstable; urgency=low
315 * fix absolute path in debian/dirs, add Suggests for slim-altusmetrum
316 * change home URL in control file to be the AltOS page
318 -- Bdale Garbee <bdale@gag.com> Thu, 26 Nov 2009 11:15:47 -0700
320 altos (0.6+43+gd6ba07e) unstable; urgency=low
323 * Decode HDOP data from skytraq GPS
324 * Document ao-postflight --gps and --kml options.
325 * Make ao-postflight create filenames using input filenames.
326 * Make TD print 0000-00-00 for invalid dates.
327 * Fix --plot arg handling. Add -all option.
328 * Convert telemetry file GPS satellite information in cc_log_read
329 * Don't crash if --plot isn't passed on ao-postflight command line
330 * ao-postflight: compute barometric alt for each GPS position
331 * ao-postflight: don't try to use missing gps sat data
332 * Automatically extract flight number for eeprom and telem filenames.
334 -- Bdale Garbee <bdale@gag.com> Sun, 22 Nov 2009 10:18:26 -0700
336 altos (0.6+32+g87e6f3e) unstable; urgency=low
339 * fix typo in comment
342 * Reduce igniter firing time from 500ms to 50ms.
343 * Add GPS date/time output to ao-postflight.
344 * Eliminate SiRF state values from ao-view.
346 -- Bdale Garbee <bdale@gag.com> Fri, 20 Nov 2009 13:18:06 -0700
348 altos (0.6+27+gb0d7e3f) unstable; urgency=low
351 * Add two-point accelerometer calibration.
352 * Remove "l" command as ao-dumplong no longer uses it
355 * Reformat ADC values to show all 16 bits
356 * ao_flight_test was using accel value for pressure too
357 * Pass accel calibration over telemetry stream. Telemetry data format
359 * Add ability to dump eeprom data over radio link.
360 * In packet master, move USB flush from packet thread to echo thread
361 * In USB pollchar, wait for packet before re-checking USB out len
362 * Explicitly use USB I/O routines in packet code
363 * Flush pending input when switching to remote packet mode
364 * Stop recording in ao-dumplog after receiving an invalid block
365 * Move ao_match_word from ao_ignite.c to ao_cmd.c
366 * Add Watchdog Timer Control register definitions
367 * Add reboot command.
368 * Return radio to telemetry settings when packet system closed.
369 * ao-postflight: fix sloppy gps sat data realloc code (was crashing).
370 * Loosen tolerances for main->landed transition
371 * Provide a dummy 'uninstall' target in the src directory.
372 * Share telemetry parsing code in cc library.
373 * Enable telemetry receive in ao_view
374 * Switch order of serial/flight in ao-postflight summary
375 * Add flight number to telemetry stream.
376 * Add date to GPS data, captured from GPRMC packet.
377 * Stop using SiRF state info.
379 -- Bdale Garbee <bdale@gag.com> Fri, 20 Nov 2009 11:43:56 -0700
381 altos (0.6) unstable; urgency=low
384 * Add support for the SkyTraq GPS unit
385 * Build two versions of TM, one for SiRF, one for SkyTraq
386 * Save some DSEG space by marking cmd functions __reentrant
387 * Add ao_wake_task and ao_exit
388 * Add keyhole-markup generation for ao-postflight.
389 * Initial packet bits. Just testing transmission
390 * Add radio carrier command
391 * Wait for TX to finish sending data
393 * Remove reason from ao_dma_abort
394 * Switch packet code from timer thread to ao_alarm
395 * Use ao_radio_done to wait for TX to completely finish with packet
396 * Send SYN packet to set sequence numbers
398 * Do more flushing in packet test code
399 * Use ao_alarm for ao_delay so it can be easily interrupted
400 * Poke master to speed up packet rate when things are busy
401 * No need to wakeup &ao_tick_count now
402 * Enable packet-based communcation to command processor
403 * Add more docs to the README file
404 * Disable interrupts while removing tasks from task list
405 * Add ao_usb_pollchar to ao.h
407 -- Bdale Garbee <bdale@gag.com> Mon, 02 Nov 2009 16:53:45 -0700
409 altos (0.5+90+g127c312) unstable; urgency=low
411 * de-version the libreadline-dev build dependency
413 -- Bdale Garbee <bdale@gag.com> Mon, 02 Nov 2009 15:57:29 -0700
415 altos (0.5+86+g2de548f) unstable; urgency=low
417 * automate push of updated and tagged master branch during
418 debian/rules prebuild
419 * flush repetitive junk out of debian/changelog, and update the
421 * add support for tagging git repository on each Debian package build
423 -- Bdale Garbee <bdale@gag.com> Mon, 12 Oct 2009 16:54:28 -0600
425 altos (0.5+77+gc57bd7f) unstable; urgency=low
427 * build for Debian from git
429 -- Bdale Garbee <bdale@gag.com> Mon, 12 Oct 2009 15:57:19 -0600