3 # English base translation file
5 # Should you need to add new logical keys here is the proposed method
7 # className.ComponentType.componentName
10 # Text tokens within braces should not be translated, e.g.
11 # "The file '{filename}' exists."
12 # They are pieces that are inserted dynamically.
16 ! Set to the name of the current translation file (used for debugging purposes)
17 debug.currentFile = messages.properties
20 RocketActions.checkbox.Donotaskmeagain = Do not ask me again
21 RocketActions.lbl.Youcanchangedefop = You can change the default operation in the preferences.
22 RocketActions.showConfirmDialog.lbl1 = Delete the selected simulations?
23 RocketActions.showConfirmDialog.lbl2 = <html><i>This operation cannot be undone.</i>
24 RocketActions.showConfirmDialog.title = Delete simulations
25 RocketActions.DelCompAct.Delete = Delete
26 RocketActions.DelCompAct.ttip.Delete = Delete the selected component.
27 RocketActions.DelSimuAct.Delete = Delete
28 RocketActions.DelSimuAct.ttip.Delete = Delete the selected simulation.
29 RocketActions.DelAct.Delete = Delete
30 RocketActions.DelAct.ttip.Delete = Delete the selected component or simulation.
31 RocketActions.CutAction.Cut = Cut
32 RocketActions.CutAction.ttip.Cut = Cut this component or simulation to the clipboard and remove from this design
33 RocketActions.CopyAct.Copy = Copy
34 RocketActions.CopyAct.ttip.Copy = Copy this component (and subcomponents) to the clipboard.
35 RocketActions.PasteAct.Paste = Paste
36 RocketActions.PasteAct.ttip.Paste = Paste the component or simulation on the clipboard to the design.
37 RocketActions.EditAct.Edit = Edit
38 RocketActions.EditAct.ttip.Edit = Edit the selected component.
39 RocketActions.NewStageAct.Newstage = New stage
40 RocketActions.NewStageAct.ttip.Newstage = Add a new stage to the rocket design.
41 RocketActions.ActBoosterstage = Booster stage
42 RocketActions.MoveUpAct.Moveup = Move up
43 RocketActions.MoveUpAct.ttip.Moveup = Move this component upwards.
44 RocketActions.MoveDownAct.Movedown = Move down
45 RocketActions.MoveDownAct.ttip.Movedown = Move this component downwards.
48 RocketPanel.FigTypeAct.Sideview = Side view
49 RocketPanel.FigTypeAct.ttip.Sideview = Side view
50 RocketPanel.FigTypeAct.Backview = Back view
51 RocketPanel.FigTypeAct.ttip.Backview = Rear view
52 RocketPanel.FigViewAct.2D = 2D View
53 RocketPanel.FigViewAct.ttip.2D = 2D View
54 RocketPanel.FigViewAct.3D = 3D View
55 RocketPanel.FigViewAct.ttip.3D = 3D View
56 RocketPanel.lbl.Motorcfg = Motor configuration:
57 RocketPanel.lbl.infoMessage = <html>Click to select Shift+click to select other Double-click to edit Click+drag to move
61 BasicFrame.tab.Rocketdesign = Rocket design
62 BasicFrame.tab.Flightsim = Flight simulations
63 BasicFrame.title.Addnewcomp = Add new component
64 BasicFrame.dlg.lbl1 = Design '
65 BasicFrame.dlg.lbl2 = ' has not been saved.
66 BasicFrame.dlg.lbl3 = Do you want to save it?
67 BasicFrame.dlg.title = Design not saved
68 BasicFrame.StageName.Sustainer = Sustainer
69 BasicFrame.WarningDialog.txt1 = The following problems were encountered while opening
70 BasicFrame.WarningDialog.txt2 = Some design features may not have been loaded correctly.
71 BasicFrame.WarningDialog.title = Warnings while opening file
74 ! General error messages used in multiple contexts
75 error.fileExists.title = File exists
76 error.fileExists.desc = File '{filename}' exists. Do you want to overwrite it?
78 error.writing.title = Error writing file
79 error.writing.desc = An error occurred while writing to the file:
82 ! Labels used in buttons of dialog windows
83 # TODO: Rename these to "btn.xxx"
85 button.cancel = Cancel
88 ! Common labels used in buttons of dialog windows
90 dlg.but.cancel = Cancel
94 ! General file type names
95 filetypes.pdf = PDF files (*.pdf)
96 BasicFrame.SimpleFileFilter1 = All rocket designs (*.ork; *.rkt)
97 BasicFrame.SimpleFileFilter2 = OpenRocket designs (*.ork)
98 BasicFrame.SimpleFileFilter3 = RockSim designs (*.rkt)
99 filetypes.images = Image files
103 AboutDialog.lbl.version = Version
104 ! The texts below provide additional credits for the translation maintainer
105 ! - In AboutDialog.lbl.translation replace "English" with the current language.
106 ! - AboutDialog.lbl.translator is the translator / group name (may be empty)
107 ! - AboutDialog.lbl.translatorWebsite is a URL to the translator / group (may be empty)
108 ! - AboutDialog.lbl.translatorIcon is the file name of an icon under pix/translators/ (may be empty)
109 AboutDialog.lbl.translation = English translation by:
110 AboutDialog.lbl.translator =
111 AboutDialog.lbl.translatorWebsite =
112 AboutDialog.lbl.translatorIcon =
116 PrintDialog.title = Print or export
117 PrintDialog.but.previewAndPrint = Preview & Print
118 PrintDialog.checkbox.showByStage = Show by stage
119 PrintDialog.lbl.selectElements = Select elements to include:
120 printdlg.but.saveaspdf = Save as PDF
121 printdlg.but.preview = Preview
122 printdlg.but.settings = Settings
123 PrintDialog.error.preview.title = Unable to open preview
124 PrintDialog.error.preview.desc1 = Unable to open PDF preview.
125 PrintDialog.error.preview.desc2 = Please use the "Save as PDF" option instead.
127 ! Component Preset Chooser Dialog
128 CompPresetChooser.title = Choose component preset
131 PrintSettingsDialog.title = Print settings
132 PrintSettingsDialog.lbl.Templatefillcolor = Template fill color:
133 PrintSettingsDialog.lbl.Templatebordercolor = Template border color:
134 PrintSettingsDialog.lbl.Papersize = Paper size:
135 PrintSettingsDialog.lbl.Paperorientation = Paper orientation:
136 PrintSettingsDialog.but.Reset = Reset
137 PrintSettingsDialog.but.Close = Close
141 bugreport.dlg.title = Bug report
142 bugreport.dlg.but.Sendbugreport = Send bug report
143 bugreport.dlg.but.Sendbugreport.Ttip = Automatically send the bug report to the OpenRocket developers.
144 bugreport.dlg.successmsg1 = Bug report successfully sent.
145 bugreport.dlg.successmsg2 = Thank you for helping make OpenRocket better!
146 bugreport.dlg.successmsg3 = Bug report sent
147 bugreport.dlg.connectedInternet = <html>If connected to the Internet, you can simply click <em>Send bug report</em>.
148 bugreport.dlg.otherwise = Otherwise, send the text below to the address:
149 bugreport.lbl.Theinformation = The information above may be included in a public bug report. Make sure it does not contain any sensitive information you do not want to be made public.
150 bugreport.dlg.failedmsg1 = OpenRocket was unable to send the bug report:
151 bugreport.dlg.failedmsg2 = Please send the report manually to
152 bugreport.dlg.failedmsg3 = Error sending report
153 bugreport.reportDialog.txt = <html><b>You can report a bug in OpenRocket by filling in and submitting the form below.</b><br>You can also report bugs and include attachments on the project web site.
154 bugreport.reportDialog.txt2 = <html><b>Please include a short description about what you were doing when the exception occurred.</b>
155 bugreport.dlg.provideDescription = Please provide a description of the bug first.
156 bugreport.dlg.provideDescription.title = Bug description missing
160 debuglogdlg.but.clear = Clear
161 debuglogdlg.OpenRocketdebuglog = OpenRocket debug log
162 debuglogdlg.Displayloglines = Display log lines:
163 debuglogdlg.Follow = Follow
164 debuglogdlg.col.Time = Time
165 debuglogdlg.col.Level = Level
166 debuglogdlg.col.Location = Location
167 debuglogdlg.col.Message = Message
168 debuglogdlg.lbl.Loglinenbr = Log line number:
169 debuglogdlg.lbl.Time = Time:
170 debuglogdlg.lbl.Level = Level:
171 debuglogdlg.lbl.Location = Location:
172 debuglogdlg.lbl.Logmessage = Log message:
173 debuglogdlg.lbl.Stacktrace = Stack trace:
176 ! Edit Motor configuration dialog
177 edtmotorconfdlg.but.removemotor = Remove motor
178 edtmotorconfdlg.but.Selectmotor = Select motor
179 edtmotorconfdlg.but.Removeconfiguration = Remove configuration
180 edtmotorconfdlg.but.Newconfiguration = New configuration
181 edtmotorconfdlg.lbl.Motormounts = <html><b>Motor mounts:</b>
182 edtmotorconfdlg.title.Editmotorconf = Edit motor configurations
183 edtmotorconfdlg.selectcomp = <html>Select which components function as motor mounts:
184 edtmotorconfdlg.lbl.Motorconfig = <html><b>Motor configurations:</b>
185 edtmotorconfdlg.lbl.Configname = Configuration name:
186 edtmotorconfdlg.lbl.Leavenamedefault = Leave name empty for default.
188 ! Example design dialog
189 exdesigndlg.but.open = Open
190 exdesigndlg.lbl.Selectexample = Select example designs to open:
191 exdesigndlg.lbl.Openexampledesign = Open example design
192 exdesigndlg.lbl.Exampledesignsnotfound = Example designs could not be found.
193 exdesigndlg.lbl.Examplesnotfound = Examples not found
196 ! Material edit panel
197 matedtpan.but.new = New
198 matedtpan.but.edit = Edit
199 matedtpan.but.delete = Delete
200 matedtpan.but.revertall = Revert all
201 matedtpan.col.Material = Material
202 matedtpan.col.Type = Type
203 matedtpan.col.Density = Density
204 matedtpan.col.but.ttip.New = Add a new material
205 matedtpan.title.Addcustmaterial = Add a custom material
206 matedtpan.but.ttip.edit = Edit an existing material
207 matedtpan.title.Editmaterial = Edit material
208 matedtpan.title2.Editmaterial = The built-in materials cannot be modified.
209 matedtpan.but.ttip.delete = Delete a user-defined material
210 matedtpan.but.ttip.revertall = Delete all user-defined materials
211 matedtpan.title.Deletealluser-defined = Delete all user-defined materials?
212 matedtpan.title.Revertall = Revert all?
213 matedtpan.lbl.edtmaterials = Editing materials will not affect existing rocket designs.
216 MaterialModel.title.Material = Material
217 MaterialModel.title.Defcustmat = Define custom material
221 pref.dlg.but.add = Add
222 pref.dlg.but.reset = Reset
223 pref.dlg.but.checknow = Check now
224 pref.dlg.but.defaultmetric = Default metric
225 pref.dlg.but.defaultimperial = Default imperial
226 pref.dlg.title.Preferences = Preferences
227 pref.dlg.tab.Units = Units
228 pref.dlg.tab.Defaultunits = Default units
229 pref.dlg.tab.Materials = Materials
230 pref.dlg.tab.Custommaterials = Custom materials
231 pref.dlg.tab.Options = Options
232 pref.dlg.tab.Miscellaneousoptions = Miscellaneous options
233 pref.dlg.lbl.Positiontoinsert = Position to insert new body components:
234 pref.dlg.lbl.Confirmdeletion = Confirm deletion of simulations:
235 pref.dlg.lbl.User-definedthrust = User-defined thrust curves:
236 pref.dlg.Allthrustcurvefiles = All thrust curve files (*.eng; *.rse; *.zip; directories)
237 pref.dlg.RASPfiles = RASP motor files (*.eng)
238 pref.dlg.RockSimfiles = RockSim engine files (*.rse)
239 pref.dlg.ZIParchives = ZIP archives (*.zip)
240 pref.dlg.checkbox.Checkupdates = Check for software updates at startup
241 pref.dlg.ttip.Checkupdatesnow = Check for software updates now
242 pref.dlg.lbl.Selectprefunits = Select your preferred units:
243 pref.dlg.lbl.Rocketdimensions = Rocket dimensions:
244 pref.dlg.lbl.Linedensity = Line density:
245 pref.dlg.lbl.Motordimensions = Motor dimensions:
246 pref.dlg.lbl.Surfacedensity = Surface density:
247 pref.dlg.lbl.Distance = Distance:
248 pref.dlg.lbl.Bulkdensity = Bulk density:
249 pref.dlg.lbl.Velocity = Velocity:
250 pref.dlg.lbl.Surfaceroughness = Surface roughness:
251 pref.dlg.lbl.Acceleration = Acceleration:
252 pref.dlg.lbl.Area = Area:
253 pref.dlg.lbl.Mass = Mass:
254 pref.dlg.lbl.Angle = Angle:
255 pref.dlg.lbl.Force = Force:
256 pref.dlg.lbl.Rollrate = Roll rate:
257 pref.dlg.lbl.Totalimpulse = Total impulse:
258 pref.dlg.lbl.Temperature = Temperature:
259 pref.dlg.lbl.Momentofinertia = Moment of inertia:
260 pref.dlg.lbl.Pressure = Pressure:
261 pref.dlg.lbl.Stability = Stability:
262 pref.dlg.lbl.FlightTime = Flight time:
263 pref.dlg.lbl.effect1 = The effects will take place the next time you open a window.
264 pref.dlg.lbl.Checkingupdates = Checking for updates...
265 pref.dlg.lbl.msg1 = An error occurred while communicating with the server.
266 pref.dlg.lbl.msg2 = Unable to retrieve update information
267 pref.dlg.lbl.msg3 = You are running the latest version of OpenRocket.
268 pref.dlg.lbl.msg4 = No updates available
269 pref.dlg.PrefChoiseSelector1 = Always ask
270 pref.dlg.PrefChoiseSelector2 = Insert in middle
271 pref.dlg.PrefChoiseSelector3 = Add to end
272 pref.dlg.PrefBooleanSelector1 = Delete
273 pref.dlg.PrefBooleanSelector2 = Confirm
275 pref.dlg.DescriptionArea.Adddirectories = Add directories, RASP motor files (*.eng), RockSim engine files (*.rse) or ZIP archives separated by a semicolon (;) to load external thrust curves. Changes will take effect the next time you start OpenRocket.
277 PreferencesDialog.lbl.language = Interface language:
278 PreferencesDialog.languages.default = System default
279 PreferencesDialog.lbl.languageEffect = The language will change the next time you start OpenRocket.
281 ! Simulation edit dialog
282 simedtdlg.but.runsimulation = Run simulation
283 simedtdlg.but.resettodefault = Reset to default
284 simedtdlg.but.add = Add
285 simedtdlg.but.remove = Remove
286 simedtdlg.title.Editsim = Edit simulation
287 simedtdlg.lbl.Simname = Simulation name:
288 simedtdlg.tab.Launchcond = Launch conditions
289 simedtdlg.tab.Simopt = Simulation options
290 simedtdlg.tab.Plotdata = Plot data
291 simedtdlg.tab.Exportdata = Export data
292 simedtdlg.lbl.Motorcfg = Motor configuration:
293 simedtdlg.lbl.ttip.Motorcfg = Select the motor configuration to use.
294 simedtdlg.combo.ttip.motorconf = Select the motor configuration to use.
295 simedtdlg.lbl.Wind = Wind
296 simedtdlg.lbl.Averwindspeed = Average windspeed:
297 simedtdlg.lbl.ttip.Averwindspeed = The average windspeed relative to the ground.
298 simedtdlg.lbl.Stddeviation = Standard deviation:
299 simedtdlg.lbl.ttip.Stddeviation = <html>The standard deviation of the windspeed.<br>The windspeed is within twice the standard deviation from the average for 95% of the time.
300 simedtdlg.lbl.Turbulenceintensity = Turbulence intensity:
301 simedtdlg.lbl.ttip.Turbulenceintensity1 = <html>The turbulence intensity is the standard deviation divided by the average windspeed.<br>
302 simedtdlg.lbl.ttip.Turbulenceintensity2 = Typical values range from
303 simedtdlg.lbl.ttip.Turbulenceintensity3 = to
304 simedtdlg.border.Atmoscond = Atmospheric conditions
305 simedtdlg.checkbox.InterStdAtmosphere = Use International Standard Atmosphere
306 simedtdlg.checkbox.ttip.InterStdAtmosphere1 = <html>Select to use the International Standard Atmosphere model.<br>This model has a temperature of
307 simedtdlg.checkbox.ttip.InterStdAtmosphere2 = and a pressure of
308 simedtdlg.checkbox.ttip.InterStdAtmosphere3 = at sea level.
309 simedtdlg.lbl.Temperature = Temperature:
310 simedtdlg.lbl.ttip.Temperature = The temperature at the launch site.
311 simedtdlg.lbl.Pressure = Pressure:
312 simedtdlg.lbl.ttip.Pressure = The atmospheric pressure at the launch site.
313 simedtdlg.lbl.Launchsite = Launch site
314 simedtdlg.lbl.Latitude = Latitude:
315 simedtdlg.lbl.ttip.Latitude = <html>The launch site latitude affects the gravitational pull of Earth.<br>Positive values are on the Northern hemisphere, negative values on the Southern hemisphere.
317 simedtdlg.lbl.Longitude = Longitude:
318 simedtdlg.lbl.ttip.Longitude = <html>Required for weather prediction and elevation models.
320 simedtdlg.lbl.Altitude = Altitude:
321 simedtdlg.lbl.ttip.Altitude = <html>The launch altitude above mean sea level.<br>This affects the position of the rocket in the atmospheric model.
322 simedtdlg.border.Launchrod = Launch rod
323 simedtdlg.lbl.Length = Length:
324 simedtdlg.lbl.ttip.Length = The length of the launch rod.
325 simedtdlg.lbl.Angle = Angle:
326 simedtdlg.lbl.ttip.Angle = The angle of the launch rod from vertical.
327 simedtdlg.lbl.Direction = Direction:
328 simedtdlg.lbl.ttip.Direction1 = <html>Direction of the launch rod relative to the wind.<br>
329 simedtdlg.lbl.ttip.Direction2 = = towards the wind,
330 simedtdlg.lbl.ttip.Direction3 = = downwind.
331 simedtdlg.border.Simopt = Simulator options
332 simedtdlg.lbl.Calcmethod = Calculation method:
333 simedtdlg.lbl.ttip.Calcmethod = <html>The Extended Barrowman method calculates aerodynamic forces according <br>to the Barrowman equations extended to accommodate more components.
334 simedtdlg.lbl.ExtBarrowman = Extended Barrowman
335 simedtdlg.lbl.Simmethod = Simulation method:
336 simedtdlg.lbl.ttip.Simmethod1 = <html>The six degree-of-freedom simulator allows the rocket total freedom during flight.<br>
337 simedtdlg.lbl.ttip.Simmethod2 = Integration is performed using a 4<sup>th</sup> order Runge-Kutta 4 numerical integration.
338 simedtdlg.lbl.GeodeticMethod = Geodetic calculations:
339 simedtdlg.lbl.ttip.GeodeticMethodTip = Relate to the calculation of coordinates on the earth. This also enables coriolis effect computations.
340 simedtdlg.lbl.Timestep = Time step:
341 simedtdlg.lbl.ttip.Timestep1 = <html>The time between simulation steps.<br>A smaller time step results in a more accurate but slower simulation.<br>
342 simedtdlg.lbl.ttip.Timestep2 = The 4<sup>th</sup> order simulation method is quite accurate with a time step of
343 simedtdlg.but.ttip.resettodefault = Reset the time step to its default value (
344 simedtdlg.border.Simlist = Simulator listeners
345 simedtdlg.txt.longA1 = <html><i>Simulation listeners</i> is an advanced feature that allows user-written code to listen to and interact with the simulation.
346 simedtdlg.txt.longA2 = For details on writing simulation listeners, see the OpenRocket technical documentation.
347 simedtdlg.lbl.Curlist = Current listeners:
348 simedtdlg.lbl.Addsimlist = Add simulation listener
349 simedtdlg.lbl.Noflightdata = No flight data available.
350 simedtdlg.lbl.runsimfirst = Please run the simulation first.
351 simedtdlg.chart.Simflight = Simulated flight
352 simedtdlg.dlg.Simres = Simulation results
353 simedtdlg.IntensityDesc.None = None
354 simedtdlg.IntensityDesc.Verylow = Very low
355 simedtdlg.IntensityDesc.Low = Low
356 simedtdlg.IntensityDesc.Medium = Medium
357 simedtdlg.IntensityDesc.High = High
358 simedtdlg.IntensityDesc.Veryhigh = Very high
359 simedtdlg.IntensityDesc.Extreme = Extreme
361 GeodeticComputationStrategy.flat.name = Flat Earth
362 GeodeticComputationStrategy.flat.desc = Perform computations with a flat Earth approximation. Sufficient for low-altitude flights.
363 GeodeticComputationStrategy.spherical.name = Spherical approximation
364 GeodeticComputationStrategy.spherical.desc = <html>Perform geodetic computations assuming a spherical Earth.<br>This is sufficiently accurate for almost all purposes.
365 GeodeticComputationStrategy.wgs84.name = WGS84 ellipsoid
366 GeodeticComputationStrategy.wgs84.desc = <html>Perform geodetic computations on the WGS84 reference ellipsoid using Vincenty's method.<br>Slower and unnecessary in most cases.
372 simpanel.but.newsimulation = New simulation
373 simpanel.but.editsimulation = Edit simulation
374 simpanel.but.runsimulations = Run simulations
375 simpanel.but.deletesimulations = Delete simulations
376 simpanel.but.plotexport = Plot / export
377 simpanel.but.ttip.newsimulation = Add a new simulation
378 simpanel.but.ttip.editsim = Edit the selected simulation
379 simpanel.but.ttip.runsimu = Re-run the selected simulations
380 simpanel.but.ttip.deletesim = Delete the selected simulations
381 simpanel.checkbox.donotask = Do not ask me again
382 simpanel.lbl.defpref = You can change the default operation in the preferences.
383 simpanel.dlg.lbl.DeleteSim1 = Delete the selected simulations?
384 simpanel.dlg.lbl.DeleteSim2 = <html><i>This operation cannot be undone.</i>
385 simpanel.dlg.lbl.DeleteSim3 = Delete simulations
386 simpanel.col.Name = Name
387 simpanel.col.Motors = Motors
388 simpanel.col.Velocityoffrod = Velocity off rod
389 simpanel.col.Velocityatdeploy = Velocity at deployment
390 simpanel.col.Apogee = Apogee
391 simpanel.col.Maxvelocity = Max. velocity
392 simpanel.col.Maxacceleration = Max. acceleration
393 simpanel.col.Timetoapogee = Time to apogee
394 simpanel.col.Flighttime = Flight time
395 simpanel.col.Groundhitvelocity = Ground hit velocity
397 ! SimulationRunDialog
398 SimuRunDlg.title.RunSim = Running simulations...
399 SimuRunDlg.lbl.Running = Running ...
400 SimuRunDlg.lbl.Simutime = Simulation time:
401 SimuRunDlg.lbl.Altitude = Altitude:
402 SimuRunDlg.lbl.Velocity = Velocity:
403 SimuRunDlg.msg.Unabletosim = Unable to simulate:
404 SimuRunDlg.msg.errorOccurred = An error occurred during the simulation:
405 SimuRunDlg.msg.AnException1 = An exception occurred during the simulation:
406 SimuRunDlg.msg.AnException2 = Please report this as a bug along with the details below.
407 SimuRunDlg.msg.AssertionError1 = A computation error occurred during the simulation.
408 SimuRunDlg.msg.AssertionError2 = Please report this as a bug along with the details below.
409 SimuRunDlg.msg.unknownerror1 = An unknown error was encountered during the simulation.
410 SimuRunDlg.msg.unknownerror2 = The program may be unstable, you should save all your designs and restart OpenRocket now!
413 RK4SimulationStepper.error.valuesTooLarge = Simulation values exceeded limits. Try selecting a shorter time step.
416 ! SimulationExportPanel
417 SimExpPan.desc = Comma Separated Files (*.csv)
418 SimExpPan.border.Vartoexport = Variables to export
419 SimExpPan.but.Selectall = Select all
420 SimExpPan.but.Selectnone = Select none
421 SimExpPan.border.Fieldsep = Field separator
422 SimExpPan.lbl.Fieldsepstr = Field separator string:
423 SimExpPan.lbl.longA1 = <html>The string used to separate the fields in the exported file.<br>
424 SimExpPan.lbl.longA2 = Use ',' for a Comma Separated Values (CSV) file.
425 SimExpPan.checkbox.Includesimudesc = Include simulation description
426 SimExpPan.checkbox.ttip.Includesimudesc = Include a comment at the beginning of the file describing the simulation.
427 SimExpPan.border.Comments = Comments
428 SimExpPan.checkbox.Includefielddesc = Include field descriptions
429 SimExpPan.checkbox.ttip.Includefielddesc = Include a comment line with the descriptions of the exported variables.
430 SimExpPan.checkbox.Incflightevents = Include flight events
431 SimExpPan.checkbox.ttip.Incflightevents = Include a comment line for every flight event.
432 SimExpPan.lbl.Commentchar = Comment character:
433 SimExpPan.lbl.ttip.Commentchar = The character(s) that mark a comment line.
434 SimExpPan.but.Exporttofile = Export to file...
435 SimExpPan.Fileexists.desc1 = File \"
436 SimExpPan.Fileexists.desc2 = \" exists. Overwrite?
437 SimExpPan.Fileexists.title = File exists
438 SimExpPan.ExportingVar.desc1 = Exporting 1 variable out of
439 SimExpPan.ExportingVar.desc2 = Exporting
440 SimExpPan.ExportingVar.desc3 = variables out of
441 SimExpPan.Col.Variable = Variable
442 SimExpPan.Col.Unit = Unit
445 CsvOptionPanel.separator.space = SPACE
446 CsvOptionPanel.separator.tab = TAB
451 MotorPlot.title.Motorplot = Motor plot
452 MotorPlot.but.Select = Select
453 MotorPlot.Chart.Motorthrustcurve = Motor thrust curve
454 MotorPlot.Chart.Time = Time / s
455 MotorPlot.Chart.Thrust = Thrust / N
456 MotorPlot.txt.Designation = Designation:
457 MotorPlot.txt.Manufacturer = Manufacturer:
458 MotorPlot.txt.Type = Type:
459 MotorPlot.txt.Delays = Delays:
460 MotorPlot.txt.Comment = Comment:\n
464 ! Simulation plot panel
465 simplotpanel.lbl.Presetplotconf = Preset plot configurations:
466 simplotpanel.lbl.Xaxistype = X axis type:
467 simplotpanel.lbl.Unit = Unit:
468 simplotpanel.lbl.Yaxistypes = Y axis types:
469 simplotpanel.lbl.Flightevents = Flight events:
470 simplotpanel.but.All = All
471 simplotpanel.but.None = None
472 simplotpanel.but.NewYaxisplottype = New Y axis plot type
473 simplotpanel.but.Plotflight = Plot flight
474 simplotpanel.lbl.Axis = Axis:
475 simplotpanel.but.ttip.Removethisplot = Remove this plot
476 simplotpanel.Desc = The data will be plotted in time order even if the X axis type is not time.
477 simplotpanel.OptionPane.lbl1 = A maximum of 15 plots is allowed.
478 simplotpanel.OptionPane.lbl2 = Cannot add plot
479 simplotpanel.AUTO_NAME = Auto
480 simplotpanel.LEFT_NAME = Left
481 simplotpanel.RIGHT_NAME = Right
482 simplotpanel.CUSTOM = Custom
483 SimulationPlotPanel.error.noPlotSelected = Please add one or more variables to plot on the Y-axis.
484 SimulationPlotPanel.error.noPlotSelected.title = Nothing to plot
487 ! Component add buttons
488 compaddbuttons.Bodycompandfinsets = Body components and fin sets
489 compaddbuttons.Nosecone = Nose cone
490 compaddbuttons.Bodytube = Body tube
491 compaddbuttons.Transition = Transition
492 compaddbuttons.Trapezoidal = Trapezoidal
493 compaddbuttons.Elliptical = Elliptical
494 compaddbuttons.Freeform = Freeform
495 compaddbuttons.Launchlug = Launch lug
496 compaddbuttons.Innercomponent = Inner component
497 compaddbuttons.Innertube = Inner tube
498 compaddbuttons.Coupler = Coupler
499 compaddbuttons.Centeringring = Centering\nring
500 compaddbuttons.Bulkhead = Bulkhead
501 compaddbuttons.Engineblock = Engine\nblock
502 compaddbuttons.Massobjects = Mass objects
503 compaddbuttons.Parachute = Parachute
504 compaddbuttons.Streamer = Streamer
505 compaddbuttons.Shockcord = Shock cord
506 compaddbuttons.Masscomponent = Mass\ncomponent
507 compaddbuttons.Donotaskmeagain = Do not ask me again
508 compaddbuttons.Selectcomppos = Select component position
509 compaddbuttons.lbl.Youcanchange = You can change the default operation in the preferences.
510 compaddbuttons.lbl.insertcomp = Insert the component after the current component or as the last component?
511 compaddbuttons.askPosition.Inserthere = Insert here
512 compaddbuttons.askPosition.Addtotheend = Add to the end
513 compaddbuttons.askPosition.Cancel = Cancel
515 ! Component Analysis Dialog
516 componentanalysisdlg.componentanalysis = Component analysis
517 componentanalysisdlg.lbl.winddir = Wind direction:
518 componentanalysisdlg.TitledBorder.warnings = Warnings:
519 componentanalysisdlg.ToggleBut.worst = Worst
520 componentanalysisdlg.lbl.angleofattack = Angle of attack:
521 componentanalysisdlg.lbl.machnumber = Mach number:
522 componentanalysisdlg.lbl.rollrate = Roll rate:
523 componentanalysisdlg.lbl.activestages = Active stages:
524 componentanalysisdlg.lbl.motorconf = Motor configuration:
525 componentanalysisdlg.TabStability.Col = Component
526 componentanalysisdlg.TabStability = Stability
527 componentanalysisdlg.TabStability.ttip = Stability information
528 componentanalysisdlg.dragTableModel.Col.Component = Component
529 componentanalysisdlg.dragTableModel.Col.Pressure = <html>Pressure C<sub>D</sub>
530 componentanalysisdlg.dragTableModel.Col.Base = <html>Base C<sub>D</sub>
531 componentanalysisdlg.dragTableModel.Col.friction = <html>Friction C<sub>D</sub>
532 componentanalysisdlg.dragTableModel.Col.total = <html>Total C<sub>D</sub>
533 componentanalysisdlg.dragTabchar = Drag characteristics
534 componentanalysisdlg.dragTabchar.ttip = Drag characteristics
535 componentanalysisdlg.rollTableModel.Col.component = Component
536 componentanalysisdlg.rollTableModel.Col.rollforc = Roll forcing coefficient
537 componentanalysisdlg.rollTableModel.Col.rolldamp = Roll damping coefficient
538 componentanalysisdlg.rollTableModel.Col.total = <html>Total C<sub>l</sub>
539 componentanalysisdlg.rollTableModel = Roll dynamics
540 componentanalysisdlg.rollTableModel.ttip = Roll dynamics
541 componentanalysisdlg.println.closingmethod = Closing method called:
542 componentanalysisdlg.println.settingnam = SETTING NAN VALUES
543 componentanalysisdlg.lbl.reflenght = Reference length:
544 componentanalysisdlg.lbl.refarea = Reference area:
545 !componentanalysisdlg.But.close =Close
546 componentanalysisdlg.TabStability.Col.Component = Component
548 ! Custom Material dialog
549 custmatdlg.title.Custommaterial = Custom material
550 custmatdlg.lbl.Materialname = Material name:
551 custmatdlg.lbl.Materialtype = Material type:
552 custmatdlg.lbl.Materialdensity = Material density:
553 custmatdlg.checkbox.Addmaterial = Add material to database
556 ! Ring Component Config
557 ringcompcfg.OuterRadius = OuterRadius
558 ringcompcfg.Automatic = Automatic
559 ringcompcfg.InnerRadius = InnerRadius
560 ringcompcfg.Thickness = Thickness
561 ringcompcfg.Length = Length
562 ringcompcfg.Positionrelativeto = Position relative to:
563 ringcompcfg.plus = plus
564 ringcompcfg.PositionValue = PositionValue
565 ringcompcfg.Radialdistance = Radial distance:
566 ringcompcfg.Distancefrom = Distance from the rocket centerline
567 ringcompcfg.Radialdirection = Radial direction:
568 ringcompcfg.radialdirectionfrom = The radial direction from the rocket centerline
569 ringcompcfg.but.Reset = Reset
570 ringcompcfg.but.Resetcomponant = Reset the component to the rocket centerline
571 ringcompcfg.EngineBlock.desc = <html>An <b>engine block</b> stops the motor from moving forwards in the motor mount tube.<br><br>In order to add a motor, create a <b>body tube</b> or <b>inner tube</b> and mark it as a motor mount in the <em>Motor</em> tab.
572 ringcompcfg.note.desc = Note: An inner tube will not affect the aerodynamics of the rocket even if it is located outside of the body tube.
576 BodyTubecfg.lbl.Bodytubelength = Body tube length:
577 BodyTubecfg.lbl.Bodytubepreset = Body tube preset:
578 BodyTubecfg.lbl.Outerdiameter = Outer diameter:
579 BodyTubecfg.lbl.Innerdiameter = Inner diameter:
580 BodyTubecfg.lbl.Wallthickness = Wall thickness:
581 BodyTubecfg.tab.General = General
582 BodyTubecfg.tab.Generalproperties = General properties
583 BodyTubecfg.tab.Motor = Motor
584 BodyTubecfg.tab.Motormountconf = Motor mount configuration
585 BodyTubecfg.checkbox.Automatic = Automatic
586 BodyTubecfg.checkbox.Filled = Filled
589 FinSetConfig.tab.Fintabs = Fin tabs
590 FinSetConfig.tab.Through-the-wall = Through-the-wall fin tabs
591 FinSetConfig.but.Converttofreeform = Convert to freeform
592 FinSetConfig.but.Converttofreeform.ttip = Convert this fin set into a freeform fin set
593 FinSetConfig.Convertfinset = Convert fin set
594 FinSetConfig.but.Splitfins = Split fins
595 FinSetConfig.but.Splitfins.ttip = Split the fin set into separate fins
596 FinSetConfig.but.AutoCalc = Calculate automatically
597 FinSetConfig.lbl.Through-the-wall = Through-the-wall fin tabs:
598 FinSetConfig.lbl.Tablength = Tab length:
599 FinSetConfig.ttip.Tablength = The length of the fin tab.
600 FinSetConfig.lbl.Tabheight = Tab height:
601 FinSetConfig.ttip.Tabheight = The spanwise height of the fin tab.
602 FinSetConfig.lbl.Tabposition = Tab position:
603 FinSetConfig.ttip.Tabposition = The position of the fin tab.
604 FinSetConfig.lbl.relativeto = relative to
607 FinMarkingGuide.lbl.Front = Front
609 ! MotorDatabaseLoadingDialog
610 MotorDbLoadDlg.title = Loading motors
611 MotorDbLoadDlg.Loadingmotors = Loading motors...
614 RocketCfg.lbl.Designname = Design name:
615 RocketCfg.lbl.Designer = Designer:
616 RocketCfg.lbl.Comments = Comments:
617 RocketCfg.lbl.Revisionhistory = Revision history:
618 RocketCfg.lbl.Material = Material:
621 ShockCordCfg.lbl.Shockcordlength = Shock cord length:
623 ! RocketComponentConfig
624 RocketCompCfg.lbl.Componentname = Component name:
625 RocketCompCfg.ttip.Thecomponentname = The component name.
626 RocketCompCfg.tab.Override = Override
627 RocketCompCfg.tab.MassandCGoverride = Mass and CG override options
628 RocketCompCfg.tab.Figure = Figure
629 RocketCompCfg.tab.Figstyleopt = Figure style options
630 RocketCompCfg.tab.Comment = Comment
631 RocketCompCfg.tab.Specifyacomment = Specify a comment for the component
632 RocketCompCfg.lbl.Mass = Mass:
633 RocketCompCfg.lbl.Componentmass = Component mass:
634 RocketCompCfg.lbl.overriddento = (overridden to
635 RocketCompCfg.lbl.overriddenby = (overridden by
636 RocketCompCfg.lbl.Componentmaterial = Component material:
637 RocketCompCfg.lbl.Componentfinish = Component finish:
638 RocketCompCfg.lbl.ttip.componentmaterialaffects = The component material affects the weight of the component.
639 RocketCompCfg.combo.ttip.componentmaterialaffects = The component material affects the weight of the component.
640 RocketCompCfg.lbl.longA1 = <html>The component finish affects the aerodynamic drag of the component.<br>
641 RocketCompCfg.lbl.longA2 = The value indicated is the average roughness height of the surface.
642 RocketCompCfg.but.Setforall = Set for all
643 RocketCompCfg.but.ttip.Setforall = Set this finish for all components of the rocket.
644 RocketCompCfg.lbl.Overridemassorcenter = Override the mass or center of gravity of the
645 RocketCompCfg.checkbox.Overridemass = Override mass:
646 RocketCompCfg.checkbox.Overridecenterofgrav = Override center of gravity:
647 RocketCompCfg.checkbox.OverridemassandCG = Override mass and CG of all subcomponents
648 RocketCompCfg.lbl.longB1 = <html>The overridden mass does not include motors.<br>
649 RocketCompCfg.lbl.longB2 = The center of gravity is measured from the front end of the
650 RocketCompCfg.lbl.Commentsonthe = Comments on the
651 RocketCompCfg.lbl.Figurestyle = Figure style:
652 RocketCompCfg.lbl.Componentcolor = Component color:
653 RocketCompCfg.lbl.Choosecolor = Choose color
654 RocketCompCfg.checkbox.Usedefaultcolor = Use default color
655 RocketCompCfg.lbl.Complinestyle = Component line style:
656 RocketCompCfg.but.Saveasdefstyle = Save as default style
657 RocketCompCfg.lbl.Diameter = Diameter:
658 RocketCompCfg.lbl.Length = Length:
659 RocketCompCfg.lbl.Thickness = Thickness:
660 RocketCompCfg.checkbox.Endcapped = End capped
661 RocketCompCfg.ttip.Endcapped = Whether the end of the shoulder is capped.
662 RocketCompCfg.title.Noseconeshoulder = Nose cone shoulder
663 RocketCompCfg.title.Aftshoulder = Aft shoulder
664 RocketCompCfg.border.Foreshoulder = Fore shoulder
665 !RocketCompCfg.lbl.Length = Length:
668 BulkheadCfg.tab.Diameter = Diameter:
669 BulkheadCfg.tab.Thickness = Thickness:
670 BulkheadCfg.tab.General = General
671 BulkheadCfg.tab.Generalproperties = General properties
674 CenteringRingCfg.tab.Outerdiam = Outer diameter:
675 CenteringRingCfg.tab.Innerdiam = Inner diameter:
676 CenteringRingCfg.tab.Thickness = Thickness:
677 CenteringRingCfg.tab.General = General
678 CenteringRingCfg.tab.Generalproperties = General properties
680 !ComponentConfigDialog
681 ComponentCfgDlg.configuration = configuration
682 ComponentCfgDlg.configuration1 =
683 ComponentCfgDlg.Modify = Modify
686 StageConfig.tab.Separation = Separation
687 StageConfig.tab.Separation.ttip = Stage separation options
688 StageConfig.separation.lbl.title = Select when this stage separates:
689 StageConfig.separation.lbl.plus = plus
690 StageConfig.separation.lbl.seconds = seconds
692 !EllipticalFinSetConfig
693 EllipticalFinSetCfg.Nbroffins = Number of fins:
694 EllipticalFinSetCfg.Rotation = Rotation:
695 EllipticalFinSetCfg.Fincant = Fin cant:
696 EllipticalFinSetCfg.Rootchord = Root chord:
697 EllipticalFinSetCfg.Height = Height:
698 EllipticalFinSetCfg.Positionrelativeto = Position relative to:
699 EllipticalFinSetCfg.plus = plus
700 EllipticalFinSetCfg.FincrossSection = Fin cross section:
701 EllipticalFinSetCfg.Thickness = Thickness:
702 EllipticalFinSetCfg.General = General
703 EllipticalFinSetCfg.Generalproperties = General properties
704 EllipticalFinSetCfg.ttip.Fincant = The angle that the fins are canted with respect to the rocket body.
706 !FreeformFinSetConfig
707 FreeformFinSetCfg.tab.General = General
708 FreeformFinSetCfg.tab.ttip.General = General properties
709 FreeformFinSetCfg.tab.Shape = Shape
710 FreeformFinSetCfg.tab.ttip.Finshape = Fin shape
711 FreeformFinSetCfg.lbl.Numberoffins = Number of fins:
712 FreeformFinSetCfg.lbl.Finrotation = Fin rotation:
713 FreeformFinSetCfg.lbl.Fincant = Fin cant:
714 FreeformFinSetCfg.lbl.ttip.Fincant = The angle that the fins are canted with respect to the rocket body.
715 FreeformFinSetCfg.lbl.Posrelativeto = Position relative to:
716 FreeformFinSetCfg.lbl.plus = plus
717 FreeformFinSetCfg.lbl.FincrossSection = Fin cross section:
718 FreeformFinSetCfg.lbl.Thickness = Thickness:
719 ! doubleClick1 + 2 form the message "Double-click to edit", split approximately at the middle
720 FreeformFinSetConfig.lbl.doubleClick1 = Double-click
721 FreeformFinSetConfig.lbl.doubleClick2 = to edit
722 FreeformFinSetConfig.lbl.clickDrag = Click+drag: Add and move points
723 FreeformFinSetConfig.lbl.ctrlClick = Ctrl+click: Remove point
724 FreeformFinSetConfig.lbl.scaleFin = Scale Fin
728 InnerTubeCfg.tab.Motor = Motor
729 InnerTubeCfg.tab.ttip.Motor = Motor mount configuration
730 InnerTubeCfg.tab.Cluster = Cluster
731 InnerTubeCfg.tab.ttip.Cluster = Cluster configuration
732 InnerTubeCfg.tab.Radialpos = Radial position
733 InnerTubeCfg.tab.ttip.Radialpos = Radial position
734 InnerTubeCfg.lbl.Selectclustercfg = Select cluster configuration:
735 InnerTubeCfg.lbl.TubeSep = Tube separation:
736 InnerTubeCfg.lbl.ttip.TubeSep = The separation of the tubes, 1.0 = touching each other
737 InnerTubeCfg.lbl.Rotation = Rotation:
738 InnerTubeCfg.lbl.ttip.Rotation = Rotation angle of the cluster configuration
739 InnerTubeCfg.lbl.Rotangle = Rotation angle of the cluster configuration
740 InnerTubeCfg.but.Splitcluster = Split cluster
741 InnerTubeCfg.lbl.longA1 = <html>Split the cluster into separate components.<br>
742 InnerTubeCfg.lbl.longA2 = This also duplicates all components attached to this inner tube.
743 InnerTubeCfg.but.Resetsettings = Reset settings
744 InnerTubeCfg.but.ttip.Resetsettings = Reset the separation and rotation to the default values
747 LaunchLugCfg.lbl.Length = Length:
748 LaunchLugCfg.lbl.Outerdiam = Outer diameter:
749 LaunchLugCfg.lbl.Innerdiam = Inner diameter:
750 LaunchLugCfg.lbl.Thickness = Thickness:
751 LaunchLugCfg.lbl.Radialpos = Radial position:
752 LaunchLugCfg.lbl.Posrelativeto = Position relative to:
753 LaunchLugCfg.lbl.plus = plus
754 LaunchLugCfg.tab.General = General
755 LaunchLugCfg.tab.Generalprop = General properties
757 ! MassComponentConfig
758 MassComponentCfg.lbl.Mass = Mass:
759 MassComponentCfg.lbl.Length = Length:
760 MassComponentCfg.lbl.Diameter = Diameter:
761 MassComponentCfg.lbl.PosRelativeto = Position relative to:
762 MassComponentCfg.lbl.plus = plus
763 MassComponentCfg.tab.General = General
764 MassComponentCfg.tab.ttip.General = General properties
765 MassComponentCfg.tab.Radialpos = Radial position
766 MassComponentCfg.tab.ttip.Radialpos = Radial position configuration
767 MassComponentCfg.lbl.Radialdistance = Radial distance:
768 MassComponentCfg.lbl.Radialdirection = Radial direction:
769 MassComponentCfg.but.Reset = Reset
772 MotorCfg.checkbox.compmotormount = This component is a motor mount
773 MotorCfg.lbl.Motorcfg = Motor configuration:
774 MotorCfg.but.New = New
775 MotorCfg.lbl.Currentmotor = Current motor:
776 MotorCfg.lbl.Motoroverhang = Motor overhang:
777 MotorCfg.lbl.Ignitionat = Ignition at:
778 MotorCfg.lbl.plus = plus
779 MotorCfg.lbl.seconds = seconds
780 MotorCfg.lbl.longA1 = The current design has only one stage.
781 MotorCfg.lbl.longA2 = Stages can be added by clicking \"New stage\".
782 MotorCfg.lbl.longB1 = The current design has
783 MotorCfg.lbl.longB2 = stages.
784 MotorCfg.but.Selectmotor = Select motor
785 MotorCfg.but.Removemotor = Remove motor
786 MotorCfg.lbl.motorLabel = None
789 NoseConeCfg.lbl.Noseconeshape = Nose cone shape:
790 NoseConeCfg.lbl.Shapeparam = Shape parameter:
791 NoseConeCfg.lbl.Noseconelength = Nose cone length:
792 NoseConeCfg.lbl.Basediam = Base diameter:
793 NoseConeCfg.checkbox.Automatic = Automatic
794 NoseConeCfg.lbl.Wallthickness = Wall thickness:
795 NoseConeCfg.checkbox.Filled = Filled
796 NoseConeCfg.tab.General = General
797 NoseConeCfg.tab.ttip.General = General properties
798 NoseConeCfg.tab.Shoulder = Shoulder
799 NoseConeCfg.tab.ttip.Shoulder = Shoulder properties
802 ParachuteCfg.lbl.Canopy = Canopy:
803 ParachuteCfg.lbl.Diameter = Diameter:
804 ParachuteCfg.lbl.Material = Material:
805 ParachuteCfg.combo.MaterialModel = The component material affects the weight of the component.
806 ParachuteCfg.lbl.longA1 = <html>Drag coefficient C<sub>D</sub>:
807 ParachuteCfg.lbl.longB1 = <html>The drag coefficient relative to the total area of the parachute.<br>
808 ParachuteCfg.lbl.longB2 = A larger drag coefficient yields a slowed descent rate.
809 ParachuteCfg.lbl.longB3 = A typical value for parachutes is 0.8.
810 ParachuteCfg.but.Reset = Reset
811 ParachuteCfg.lbl.Shroudlines = Shroud lines:
812 ParachuteCfg.lbl.Numberoflines = Number of lines:
813 ParachuteCfg.lbl.Linelength = Line length:
814 ParachuteCfg.lbl.Material = Material:
815 ParachuteCfg.lbl.Posrelativeto = Position relative to:
816 ParachuteCfg.lbl.plus = plus
817 ParachuteCfg.lbl.Packedlength = Packed length:
818 ParachuteCfg.lbl.Packeddiam = Packed diameter:
819 ParachuteCfg.lbl.Deploysat = Deploys at:
820 ParachuteCfg.lbl.seconds = seconds
821 ParachuteCfg.lbl.Altitude = Altitude:
822 ParachuteCfg.tab.General = General
823 ParachuteCfg.tab.ttip.General = General properties
824 ParachuteCfg.tab.Radialpos = Radial position
825 ParachuteCfg.tab.ttip.Radialpos = Radial position configuration
826 ParachuteCfg.lbl.Radialdistance = Radial distance:
827 ParachuteCfg.lbl.Radialdirection = Radial direction:
828 ParachuteCfg.but.Reset = Reset
829 ParachuteCfg.lbl.plusdelay = plus
832 ShockCordCfg.lbl.Shockcordlength = Shock cord length:
833 ShockCordCfg.lbl.Shockcordmaterial = Shock cord material:
834 ShockCordCfg.lbl.Posrelativeto = Position relative to:
835 ShockCordCfg.lbl.plus = plus
836 ShockCordCfg.lbl.Packedlength = Packed length:
837 ShockCordCfg.lbl.Packeddiam = Packed diameter:
838 ShockCordCfg.tab.General = General
839 ShockCordCfg.tab.ttip.General = General properties
842 SleeveCfg.tab.Outerdiam = Outer diameter:
843 SleeveCfg.tab.Innerdiam = Inner diameter:
844 SleeveCfg.tab.Wallthickness = Wall thickness:
845 SleeveCfg.tab.Length = Length:
846 SleeveCfg.tab.General = General
847 SleeveCfg.tab.Generalproperties = General properties
850 StreamerCfg.lbl.Striplength = Strip length:
851 StreamerCfg.lbl.Stripwidth = Strip width:
852 StreamerCfg.lbl.Striparea = Strip area:
853 StreamerCfg.lbl.Aspectratio = Aspect ratio:
854 StreamerCfg.lbl.Material = Material:
855 StreamerCfg.combo.ttip.MaterialModel = The component material affects the weight of the component.
856 StreamerCfg.lbl.longA1 = <html>Drag coefficient C<sub>D</sub>:
857 StreamerCfg.lbl.longB1 = <html>The drag coefficient relative to the total area of the streamer.<br>
858 StreamerCfg.lbl.longB2 = A larger drag coefficient yields a slowed descent rate.
859 StreamerCfg.lbl.Automatic = Automatic
860 StreamerCfg.lbl.longC1 = The drag coefficient is relative to the area of the streamer.
861 StreamerCfg.lbl.Posrelativeto = Position relative to:
862 StreamerCfg.lbl.plus = plus
863 StreamerCfg.lbl.Packedlength = Packed length:
864 StreamerCfg.lbl.Packeddiam = Packed diameter:
865 StreamerCfg.lbl.Deploysat = Deploys at:
866 StreamerCfg.lbl.seconds = seconds
867 StreamerCfg.lbl.Altitude = Altitude:
868 StreamerCfg.tab.General = General
869 StreamerCfg.tab.ttip.General = General properties
870 StreamerCfg.tab.Radialpos = Radial position
871 StreamerCfg.tab.ttip.Radialpos = Radial position configuration
872 StreamerCfg.lbl.Radialdistance = Radial distance:
873 StreamerCfg.lbl.Radialdirection = Radial direction:
874 StreamerCfg.but.Reset = Reset
875 StreamerCfg.lbl.plusdelay = plus
877 ! ThicknessRingComponentConfig
878 ThicknessRingCompCfg.tab.Outerdiam = Outer diameter:
879 ThicknessRingCompCfg.tab.Innerdiam = Inner diameter:
880 ThicknessRingCompCfg.tab.Wallthickness = Wall thickness:
881 ThicknessRingCompCfg.tab.Length = Length:
882 ThicknessRingCompCfg.tab.General = General
883 ThicknessRingCompCfg.tab.Generalprop = General properties
886 TransitionCfg.lbl.Transitionshape = Transition shape:
887 TransitionCfg.checkbox.Clipped = Clipped
888 TransitionCfg.lbl.Shapeparam = Shape parameter:
889 TransitionCfg.lbl.Transitionlength = Transition length:
890 TransitionCfg.lbl.Forediam = Fore diameter:
891 TransitionCfg.checkbox.Automatic = Automatic
892 TransitionCfg.lbl.Aftdiam = Aft diameter:
893 TransitionCfg.lbl.Wallthickness = Wall thickness:
894 TransitionCfg.checkbox.Filled = Filled
895 TransitionCfg.tab.General = General
896 TransitionCfg.tab.Generalproperties = General properties
897 TransitionCfg.tab.Shoulder = Shoulder
898 TransitionCfg.tab.Shoulderproperties = Shoulder properties
900 ! TrapezoidFinSetConfig
901 TrapezoidFinSetCfg.lbl.Nbroffins = Number of fins:
902 TrapezoidFinSetCfg.lbl.ttip.Nbroffins = The number of fins in the fin set.
903 TrapezoidFinSetCfg.lbl.Finrotation = Fin rotation:
904 TrapezoidFinSetCfg.lbl.ttip.Finrotation = The angle of the first fin in the fin set.
905 TrapezoidFinSetCfg.lbl.Fincant = Fin cant:
906 TrapezoidFinSetCfg.lbl.ttip.Fincant =The angle that the fins are canted with respect to the rocket body.
907 TrapezoidFinSetCfg.lbl.Rootchord = Root chord:
908 TrapezoidFinSetCfg.lbl.Tipchord = Tip chord:
909 TrapezoidFinSetCfg.lbl.Height = Height:
910 TrapezoidFinSetCfg.lbl.Sweeplength = Sweep length:
911 TrapezoidFinSetCfg.lbl.Sweepangle = Sweep angle:
912 TrapezoidFinSetCfg.lbl.FincrossSection = Fin cross section:
913 TrapezoidFinSetCfg.lbl.Thickness = Thickness:
914 TrapezoidFinSetCfg.lbl.Posrelativeto = Position relative to:
915 TrapezoidFinSetCfg.lbl.plus = plus
916 TrapezoidFinSetCfg.tab.General = General
917 TrapezoidFinSetCfg.tab.Generalproperties = General properties
919 !MotorConfigurationModel
920 MotorCfgModel.Editcfg = Edit configurations
922 ! StorageOptionChooser
923 StorageOptChooser.lbl.Simdatatostore = Simulated data to store:
924 StorageOptChooser.rdbut.Allsimdata = All simulated data
925 StorageOptChooser.lbl.longA1 = <html>Store all simulated data.<br>
926 StorageOptChooser.lbl.longA2 = This can result in very large files!
927 StorageOptChooser.rdbut.Every = Every
928 StorageOptChooser.lbl.longB1 = <html>Store plottable values approximately this far apart.<br>
929 StorageOptChooser.lbl.longB2 = Larger values result in smaller files.
930 StorageOptChooser.lbl.seconds = seconds
931 StorageOptChooser.rdbut.Onlyprimfig = Only primary figures
932 StorageOptChooser.lbl.longC1 = <html>Store only the values shown in the summary table.<br>
933 StorageOptChooser.lbl.longC2 = This results in the smallest files.
934 StorageOptChooser.checkbox.Compfile = Compress file
935 StorageOptChooser.lbl.UsingComp = Using compression reduces the file size significantly.
936 StorageOptChooser.lbl.longD1 = An estimate on how large the resulting file would be with the present options.
937 StorageOptChooser.ttip.Saveopt = Save options
938 StorageOptChooser.lbl.Estfilesize = Estimated file size:
939 StorageOptChooser.lbl.Saveopt = Save options
941 ! ThrustCurveMotorSelectionPanel
942 TCMotorSelPan.lbl.Selrocketmotor = Select rocket motor:
943 TCMotorSelPan.checkbox.hideSimilar = Hide very similar thrust curves
944 TCMotorSelPan.SHOW_DESCRIPTIONS.desc1 = Show all motors
945 TCMotorSelPan.SHOW_DESCRIPTIONS.desc2 = Show motors with diameter less than that of the motor mount
946 TCMotorSelPan.SHOW_DESCRIPTIONS.desc3 = Show motors with diameter equal to that of the motor mount
947 TCMotorSelPan.lbl.Motormountdia = Motor mount diameter:
948 TCMotorSelPan.lbl.Search = Search:
949 TCMotorSelPan.lbl.Selectthrustcurve = Select thrust curve:
950 TCMotorSelPan.lbl.Ejectionchargedelay = Ejection charge delay:
951 TCMotorSelPan.equalsIgnoreCase.None = None
952 TCMotorSelPan.lbl.NumberofsecondsorNone = (Number of seconds or \"None\")
953 TCMotorSelPan.lbl.Totalimpulse = Total impulse:
954 TCMotorSelPan.lbl.Avgthrust = Avg. thrust:
955 TCMotorSelPan.lbl.Maxthrust = Max. thrust:
956 TCMotorSelPan.lbl.Burntime = Burn time:
957 TCMotorSelPan.lbl.Launchmass = Launch mass:
958 TCMotorSelPan.lbl.Emptymass = Empty mass:
959 TCMotorSelPan.lbl.Datapoints = Data points:
960 TCMotorSelPan.lbl.Digest = Digest:
961 TCMotorSelPan.title.Thrustcurve = Thrust curve:
962 TCMotorSelPan.title.Thrust = Thrust
963 TCMotorSelPan.delayBox.None = None
967 PlotDialog.title.Flightdataplot = Flight data plot
968 PlotDialog.Chart.Simulatedflight = Simulated flight
969 PlotDialog.CheckBox.Showdatapoints = Show data points
970 PlotDialog.lbl.Chart = Click and drag down+right to zoom in, up+left to zoom out
973 ! "main" prefix is used for the main application dialog
975 # FIXME: Rename the description keys
977 main.menu.file = File
978 main.menu.file.desc = File-handling related tasks
979 main.menu.file.new = New
980 main.menu.file.new.desc = Create a new rocket design
981 main.menu.file.open = Open...
982 BasicFrame.item.Openrocketdesign = Open a rocket design
983 main.menu.file.openExample = Open example...
984 BasicFrame.item.Openexamplerocketdesign = Open an example rocket design
985 main.menu.file.save = Save
986 BasicFrame.item.SavecurRocketdesign = Save the current rocket design
987 main.menu.file.saveAs = Save as...
988 BasicFrame.item.SavecurRocketdesnewfile = Save the current rocket design to a new file
989 main.menu.file.print = Print / Export PDF...
990 main.menu.file.print.desc = Print or save as PDF the parts list and fin templates
991 main.menu.file.close = Close
992 BasicFrame.item.Closedesign = Close the current rocket design
993 main.menu.file.quit = Quit
994 BasicFrame.item.Quitprogram = Quit the program
996 main.menu.edit = Edit
997 BasicFrame.menu.Rocketedt = Rocket editing
998 main.menu.edit.undo = Undo
999 main.menu.edit.undo.desc = Undo the previous operation
1000 main.menu.edit.redo = Redo
1001 main.menu.edit.redo.desc = Redo the previously undone operation
1002 main.menu.edit.cut = Cut
1003 main.menu.edit.copy = Copy
1004 main.menu.edit.paste = Paste
1005 main.menu.edit.delete = Delete
1006 main.menu.edit.resize = Scale...
1007 main.menu.edit.resize.desc = Scale parts of the rocket design
1008 main.menu.edit.preferences = Preferences
1009 main.menu.edit.preferences.desc = Setup the application preferences
1011 main.menu.analyze = Analyze
1012 main.menu.analyze.desc = Rocket analysis
1013 main.menu.analyze.componentAnalysis = Component analysis
1014 main.menu.analyze.componentAnalysis.desc = Analyze the rocket components separately
1015 main.menu.analyze.optimization = Rocket optimization
1016 main.menu.analyze.optimization.desc = General rocket design optimization
1018 main.menu.help = Help
1019 main.menu.help.desc = Information about OpenRocket
1020 main.menu.help.tours = Guided tours
1021 main.menu.help.tours.desc = Take guided tours on OpenRocket
1022 main.menu.help.license = License
1023 main.menu.help.license.desc = OpenRocket license information
1024 main.menu.help.bugReport = Bug report
1025 main.menu.help.bugReport.desc = Information about reporting bugs in OpenRocket
1026 main.menu.help.debugLog = Debug log
1027 main.menu.help.debugLog.desc = View the OpenRocket debug log
1028 main.menu.help.about = About
1029 main.menu.help.about.desc = Copyright details about OpenRocket
1031 main.menu.debug = Debug
1032 main.menu.debug.whatisthismenu = What is this menu?
1033 main.menu.debug.createtestrocket = Create test rocket
1036 ! Translate here all material database
1041 Databases.materials.Acrylic = Acrylic
1042 Databases.materials.Aluminum = Aluminum
1043 Databases.materials.Balsa = Balsa
1044 Databases.materials.Basswood = Basswood
1045 Databases.materials.Birch = Birch
1046 Databases.materials.Brass = Brass
1047 Databases.materials.Cardboard = Cardboard
1048 Databases.materials.Carbonfiber = Carbon fiber
1049 Databases.materials.Cork = Cork
1050 Databases.materials.DepronXPS = Depron (XPS)
1051 Databases.materials.Fiberglass = Fiberglass
1052 Databases.materials.Kraftphenolic = Kraft phenolic
1053 Databases.materials.Maple = Maple
1054 Databases.materials.Paperoffice = Paper (office)
1055 Databases.materials.Pine = Pine
1056 Databases.materials.Plywoodbirch = Plywood (birch)
1057 Databases.materials.PolycarbonateLexan = Polycarbonate (Lexan)
1058 Databases.materials.Polystyrene = Polystyrene
1059 Databases.materials.PVC = PVC
1060 Databases.materials.Spruce = Spruce
1061 Databases.materials.Steel = Steel
1062 Databases.materials.StyrofoamgenericEPS = Styrofoam (generic EPS)
1063 Databases.materials.StyrofoamBluefoamXPS = Styrofoam \"Blue foam\" (XPS)
1064 Databases.materials.Titanium = Titanium
1065 Databases.materials.Quantumtubing = Quantum tubing
1066 Databases.materials.BlueTube = Blue tube
1068 Databases.materials.Ripstopnylon = Ripstop nylon
1069 Databases.materials.Mylar = Mylar
1070 Databases.materials.Polyethylenethin = Polyethylene (thin)
1071 Databases.materials.Polyethyleneheavy = Polyethylene (heavy)
1072 Databases.materials.Silk = Silk
1073 Databases.materials.Paperoffice = Paper (office)
1074 Databases.materials.Cellophane = Cellophane
1075 Databases.materials.Crepepaper = Cr\u00eape paper
1077 Databases.materials.Threadheavy-duty = Thread (heavy-duty)
1078 Databases.materials.Elasticcordround2mm = Elastic cord (round 2mm, 1/16 in)
1079 Databases.materials.Elasticcordflat6mm = Elastic cord (flat 6mm, 1/4 in)
1080 Databases.materials.Elasticcordflat12mm = Elastic cord (flat 12mm, 1/2 in)
1081 Databases.materials.Elasticcordflat19mm = Elastic cord (flat 19mm, 3/4 in)
1082 Databases.materials.Elasticcordflat25mm = Elastic cord (flat 25mm, 1 in)
1083 Databases.materials.Braidednylon2mm = Braided nylon (2 mm, 1/16 in)
1084 Databases.materials.Braidednylon3mm = Braided nylon (3 mm, 1/8 in)
1085 Databases.materials.Tubularnylon11mm = Tubular nylon (11 mm, 7/16 in)
1086 Databases.materials.Tubularnylon14mm = Tubular nylon (14 mm, 9/16 in)
1087 Databases.materials.Tubularnylon25mm = Tubular nylon (25 mm, 1 in)
1090 ExternalComponent.Rough = Rough
1091 ExternalComponent.Unfinished = Unfinished
1092 ExternalComponent.Regularpaint = Regular paint
1093 ExternalComponent.Smoothpaint = Smooth paint
1094 ExternalComponent.Polished = Polished
1097 LineStyle.Solid = Solid
1098 LineStyle.Dashed = Dashed
1099 LineStyle.Dotted = Dotted
1100 LineStyle.Dash-dotted = Dash-dotted
1101 LineStyle.Defaultstyle = Default style
1104 Shape.Conical = Conical
1105 Shape.Conical.desc1 = A conical nose cone has a profile of a triangle.
1106 Shape.Conical.desc2 = A conical transition has straight sides.
1108 Shape.Ogive.desc1 = An ogive nose cone has a profile that is a segment of a circle. The shape parameter value 1 produces a <b>tangent ogive</b>, which has a smooth transition to the body tube, values less than 1 produce <b>secant ogives</b>.
1109 Shape.Ogive.desc2 = An ogive transition has a profile that is a segment of a circle. The shape parameter value 1 produces a <b>tangent ogive</b>, which has a smooth transition to the body tube at the aft end, values less than 1 produce <b>secant ogives</b>.
1110 Shape.Ellipsoid = Ellipsoid
1111 Shape.Ellipsoid.desc1 = An ellipsoidal nose cone has a profile of a half-ellipse with major axes of lengths 2×<i>Length</i> and <i>Diameter</i>.
1112 Shape.Ellipsoid.desc2 = An ellipsoidal transition has a profile of a half-ellipse with major axes of lengths 2×<i>Length</i> and <i>Diameter</i>. If the transition is not clipped, then the profile is extended at the center by the corresponding radius.
1113 Shape.Powerseries = Power series
1114 Shape.Powerseries.desc1 = A power series nose cone has a profile of <i>Radius</i> × (<i>x</i> / <i>Length</i>)<sup><i>k</i></sup> where <i>k</i> is the shape parameter. For <i>k</i>=0.5 this is a <b>\u00BD-power</b> or <b>parabolic</b> nose cone, for <i>k</i>=0.75 a <b>\u00BE-power</b>, and for <i>k</i>=1 a <b>conical</b> nose cone.
1115 Shape.Powerseries.desc2 = A power series transition has a profile of <i>Radius</i> × (<i>x</i> / <i>Length</i>)<sup><i>k</i></sup> where <i>k</i> is the shape parameter. For <i>k</i>=0.5 the transition is <b>\u00BD-power</b> or <b>parabolic</b>, for <i>k</i>=0.75 a <b>\u00BE-power</b>, and for <i>k</i>=1 <b>conical</b>.
1116 Shape.Parabolicseries = Parabolic series
1117 Shape.Parabolicseries.desc1 = A parabolic series nose cone has a profile of a parabola. The shape parameter defines the segment of the parabola to utilize. The shape parameter 1.0 produces a <b>full parabola</b> which is tangent to the body tube, 0.75 produces a <b>3/4 parabola</b>, 0.5 procudes a <b>1/2 parabola</b> and 0 produces a <b>conical</b> nose cone.
1118 Shape.Parabolicseries.desc2 = A parabolic series transition has a profile of a parabola. The shape parameter defines the segment of the parabola to utilize. The shape parameter 1.0 produces a <b>full parabola</b> which is tangent to the body tube at the aft end, 0.75 produces a <b>3/4 parabola</b>, 0.5 procudes a <b>1/2 parabola</b> and 0 produces a <b>conical</b> transition.
1119 Shape.Haackseries = Haack series
1120 Shape.Haackseries.desc1 = The Haack series nose cones are designed to minimize drag. The shape parameter 0 produces an <b>LD-Haack</b> or <b>Von Karman</b> nose cone, which minimizes drag for fixed length and diameter, while a value of 0.333 produces an <b>LV-Haack</b> nose cone, which minimizes drag for fixed length and volume.
1121 Shape.Haackseries.desc2 = The Haack series <i>nose cones</i> are designed to minimize drag. These transition shapes are their equivalents, but do not necessarily produce optimal drag for transitions. The shape parameter 0 produces an <b>LD-Haack</b> or <b>Von Karman</b> shape, while a value of 0.333 produces an <b>LV-Haack</b> shape.
1125 RocketComponent.Position.TOP = Top of the parent component
1126 RocketComponent.Position.MIDDLE = Middle of the parent component
1127 RocketComponent.Position.BOTTOM = Bottom of the parent component
1128 RocketComponent.Position.AFTER = After the parent component
1129 RocketComponent.Position.ABSOLUTE = Tip of the nose cone
1132 LaunchLug.Launchlug = Launch lug
1134 NoseCone.NoseCone = Nose cone
1136 Transition.Transition = Transition
1140 Stage.SeparationEvent.UPPER_IGNITION = Upper stage motor ignition
1141 Stage.SeparationEvent.IGNITION = Current stage motor ignition
1142 Stage.SeparationEvent.BURNOUT = Current stage motor burnout
1143 Stage.SeparationEvent.EJECTION = Current stage ejection charge
1144 Stage.SeparationEvent.LAUNCH = Launch
1145 Stage.SeparationEvent.NEVER = Never
1148 BodyTube.BodyTube = Body tube
1150 TubeCoupler.TubeCoupler = Tube coupler
1152 InnerTube.InnerTube = Inner Tube
1154 TrapezoidFinSet.TrapezoidFinSet = Trapezoidal fin set
1156 FreeformFinSet.FreeformFinSet = Freeform fin set
1158 MassComponent.MassComponent = Mass component
1160 Parachute.Parachute = Parachute
1162 ShockCord.ShockCord = Shock cord
1164 Bulkhead.Bulkhead = Bulkhead
1167 Rocket.motorCount.Nomotor = [No motors]
1168 Rocket.compname.Rocket = Rocket
1171 MotorMount.IgnitionEvent.AUTOMATIC = Automatic (launch or ejection charge)
1172 MotorMount.IgnitionEvent.LAUNCH = Launch
1173 MotorMount.IgnitionEvent.EJECTION_CHARGE = First ejection charge of previous stage
1174 MotorMount.IgnitionEvent.BURNOUT = First burnout of previous stage
1175 MotorMount.IgnitionEvent.NEVER = Never
1178 ComponentIcons.Nosecone = Nose cone
1179 ComponentIcons.Bodytube = Body tube
1180 ComponentIcons.Transition = Transition
1181 ComponentIcons.Trapezoidalfinset = Trapezoidal fin set
1182 ComponentIcons.Ellipticalfinset = Elliptical fin set
1183 ComponentIcons.Freeformfinset = Freeform fin set
1184 ComponentIcons.Launchlug = Launch lug
1185 ComponentIcons.Innertube = Inner tube
1186 ComponentIcons.Tubecoupler = Tube coupler
1187 ComponentIcons.Centeringring = Centering ring
1188 ComponentIcons.Bulkhead = Bulk head
1189 ComponentIcons.Engineblock = Engine block
1190 ComponentIcons.Parachute = Parachute
1191 ComponentIcons.Streamer = Streamer
1192 ComponentIcons.Shockcord = Shock cord
1193 ComponentIcons.Masscomponent = Mass component
1194 ComponentIcons.disabled = (disabled)
1197 StageAction.Stage = Stage
1200 RecoveryDevice.DeployEvent.LAUNCH = Launch (plus NN seconds)
1201 RecoveryDevice.DeployEvent.EJECTION = First ejection charge of this stage
1202 RecoveryDevice.DeployEvent.APOGEE = Apogee
1203 RecoveryDevice.DeployEvent.ALTITUDE = Specific altitude during descent
1204 RecoveryDevice.DeployEvent.NEVER = Never
1207 FlightEvent.Type.LAUNCH = Launch
1208 FlightEvent.Type.IGNITION = Motor ignition
1209 FlightEvent.Type.LIFTOFF = Lift-off
1210 FlightEvent.Type.LAUNCHROD = Launch rod clearance
1211 FlightEvent.Type.BURNOUT = Motor burnout
1212 FlightEvent.Type.EJECTION_CHARGE = Ejection charge
1213 FlightEvent.Type.STAGE_SEPARATION = Stage separation
1214 FlightEvent.Type.APOGEE = Apogee
1215 FlightEvent.Type.RECOVERY_DEVICE_DEPLOYMENT = Recovery device deployment
1216 FlightEvent.Type.GROUND_HIT = Ground hit
1217 FlightEvent.Type.SIMULATION_END = Simulation end
1218 FlightEvent.Type.ALTITUDE = Altitude change
1220 ! ThrustCurveMotorColumns
1221 TCurveMotorCol.MANUFACTURER = Manufacturer
1222 TCurveMotorCol.DESIGNATION = Designation
1223 TCurveMotorCol.TYPE = Type
1224 TCurveMotorCol.DIAMETER = Diameter
1225 TCurveMotorCol.LENGTH = Length
1228 RocketInfo.lengthLine.Length = Length
1229 RocketInfo.lengthLine.maxdiameter = , max. diameter
1230 RocketInfo.massText1 = Mass with motors
1231 RocketInfo.massText2 = Mass with no motors
1232 RocketInfo.at = at M=
1233 RocketInfo.cgText = CG:
1234 RocketInfo.cpText = CP:
1235 RocketInfo.stabText = Stability:
1236 RocketInfo.Warning = Warning:
1237 RocketInfo.Calculating = Calculating...
1238 RocketInfo.Apogee = Apogee:
1239 RocketInfo.Maxvelocity = Max. velocity:
1240 RocketInfo.Maxacceleration = Max. acceleration:
1241 RocketInfo.apogeeValue = N/A
1242 RocketInfo.Mach = (Mach
1243 RocketInfo.velocityValue = N/A
1244 RocketInfo.accelerationValue = N/A
1247 FinSet.CrossSection.SQUARE = Square
1248 FinSet.CrossSection.ROUNDED = Rounded
1249 FinSet.CrossSection.AIRFOIL = Airfoil
1250 FinSet.TabRelativePosition.FRONT = Root chord leading edge
1251 FinSet.TabRelativePosition.CENTER = Root chord midpoint
1252 FinSet.TabRelativePosition.END = Root chord trailing edge
1255 FlightDataType.TYPE_TIME = Time
1256 FlightDataType.TYPE_ALTITUDE = Altitude
1257 FlightDataType.TYPE_VELOCITY_Z = Vertical velocity
1258 FlightDataType.TYPE_ACCELERATION_Z = Vertical acceleration
1259 FlightDataType.TYPE_VELOCITY_TOTAL = Total velocity
1260 FlightDataType.TYPE_ACCELERATION_TOTAL = Total acceleration
1261 FlightDataType.TYPE_POSITION_X = Position upwind
1262 FlightDataType.TYPE_POSITION_Y = Position parallel to wind
1263 FlightDataType.TYPE_POSITION_XY = Lateral distance
1264 FlightDataType.TYPE_POSITION_DIRECTION = Lateral direction
1265 FlightDataType.TYPE_VELOCITY_XY = Lateral velocity
1266 FlightDataType.TYPE_ACCELERATION_XY = Lateral acceleration
1267 FlightDataType.TYPE_AOA = Angle of attack
1268 FlightDataType.TYPE_ROLL_RATE = Roll rate
1269 FlightDataType.TYPE_PITCH_RATE = Pitch rate
1270 FlightDataType.TYPE_YAW_RATE = Yaw rate
1271 FlightDataType.TYPE_MASS = Mass
1272 FlightDataType.TYPE_LONGITUDINAL_INERTIA = Longitudinal moment of inertia
1273 FlightDataType.TYPE_ROTATIONAL_INERTIA = Rotational moment of inertia
1274 FlightDataType.TYPE_CP_LOCATION = CP location
1275 FlightDataType.TYPE_CG_LOCATION = CG location
1276 FlightDataType.TYPE_STABILITY = Stability margin calibers
1277 FlightDataType.TYPE_MACH_NUMBER = Mach number
1278 FlightDataType.TYPE_REYNOLDS_NUMBER = Reynolds number
1279 FlightDataType.TYPE_THRUST_FORCE = Thrust
1280 FlightDataType.TYPE_DRAG_FORCE = Drag force
1281 FlightDataType.TYPE_DRAG_COEFF = Drag coefficient
1282 FlightDataType.TYPE_AXIAL_DRAG_COEFF = Axial drag coefficient
1283 FlightDataType.TYPE_FRICTION_DRAG_COEFF = Friction drag coefficient
1284 FlightDataType.TYPE_PRESSURE_DRAG_COEFF = Pressure drag coefficient
1285 FlightDataType.TYPE_BASE_DRAG_COEFF = Base drag coefficient
1286 FlightDataType.TYPE_NORMAL_FORCE_COEFF = Normal force coefficient
1287 FlightDataType.TYPE_PITCH_MOMENT_COEFF = Pitch moment coefficient
1288 FlightDataType.TYPE_YAW_MOMENT_COEFF = Yaw moment coefficient
1289 FlightDataType.TYPE_SIDE_FORCE_COEFF = Side force coefficient
1290 FlightDataType.TYPE_ROLL_MOMENT_COEFF = Roll moment coefficient
1291 FlightDataType.TYPE_ROLL_FORCING_COEFF = Roll forcing coefficient
1292 FlightDataType.TYPE_ROLL_DAMPING_COEFF = Roll damping coefficient
1293 FlightDataType.TYPE_PITCH_DAMPING_MOMENT_COEFF = Pitch damping coefficient
1294 FlightDataType.TYPE_YAW_DAMPING_MOMENT_COEFF = Yaw damping coefficient
1295 FlightDataType.TYPE_REFERENCE_LENGTH = Reference length
1296 FlightDataType.TYPE_REFERENCE_AREA = Reference area
1297 FlightDataType.TYPE_ORIENTATION_THETA = Vertical orientation (zenith)
1298 FlightDataType.TYPE_ORIENTATION_PHI = Lateral orientation (azimuth)
1299 FlightDataType.TYPE_WIND_VELOCITY = Wind velocity
1300 FlightDataType.TYPE_AIR_TEMPERATURE = Air temperature
1301 FlightDataType.TYPE_AIR_PRESSURE = Air pressure
1302 FlightDataType.TYPE_SPEED_OF_SOUND = Speed of sound
1303 FlightDataType.TYPE_TIME_STEP = Simulation time step
1304 FlightDataType.TYPE_COMPUTATION_TIME = Computation time
1305 FlightDataType.TYPE_LATITUDE = Latitude
1306 FlightDataType.TYPE_LONGITUDE = Longitude
1307 FlightDataType.TYPE_CORIOLIS_ACCELERATION = Coriolis acceleration
1310 PlotConfiguration.Verticalmotion = Vertical motion vs. time
1311 PlotConfiguration.Totalmotion = Total motion vs. time
1312 PlotConfiguration.Flightside = Flight side profile
1313 PlotConfiguration.Stability = Stability vs. time
1314 PlotConfiguration.Dragcoef = Drag coefficients vs. Mach number
1315 PlotConfiguration.Rollcharacteristics = Roll characteristics
1316 PlotConfiguration.Angleofattack = Angle of attack and orientation vs. time
1317 PlotConfiguration.Simulationtime = Simulation time step and computation time
1320 Warning.LargeAOA.str1 = Large angle of attack encountered.
1321 Warning.LargeAOA.str2 = Large angle of attack encountered (
1322 Warning.DISCONTINUITY = Discontinuity in rocket body diameter.
1323 Warning.THICK_FIN = Thick fins may not be modeled accurately.
1324 Warning.JAGGED_EDGED_FIN = Jagged-edged fin predictions may be inaccurate.
1325 Warning.LISTENERS_AFFECTED = Listeners modified the flight simulation
1326 Warning.RECOVERY_DEPLOYMENT_WHILE_BURNING = Recovery device opened while motor still burning.
1327 Warning.FILE_INVALID_PARAMETER = Invalid parameter encountered, ignoring.
1331 ScaleDialog.lbl.scaleRocket = Entire rocket
1332 ScaleDialog.lbl.scaleSubselection = Selection and all subcomponents
1333 ScaleDialog.lbl.scaleSelection = Only selected component
1334 ScaleDialog.title = Scale design
1335 ScaleDialog.lbl.scale = Scale:
1336 ScaleDialog.lbl.scale.ttip = Select whether to scale the entire design or only the selected component
1337 ScaleDialog.lbl.scaling = Scaling to apply:
1338 ScaleDialog.lbl.scaling.ttip = Resulting size, values above 100% grow and values below 100% shrink the design.
1339 ! The scaleFrom/scaleTo pair creates a phrase "Scale from [...] to [...]"
1340 ScaleDialog.lbl.scaleFrom = Scale from
1341 ScaleDialog.lbl.scaleTo = to
1342 ScaleDialog.lbl.scaleFromTo.ttip = Define the scaling based on an original and resulting length.
1343 ScaleDialog.checkbox.scaleMass = Update explicit mass values
1344 ScaleDialog.checkbox.scaleMass.ttip = Scale mass component and override mass values by the cube of the scaling factor
1345 ScaleDialog.button.scale = Scale
1346 ScaleDialog.undo.scaleRocket = Scale rocket
1347 ScaleDialog.undo.scaleComponent = Scale component
1348 ScaleDialog.undo.scaleComponents = Scale components
1354 OpenRocketPrintable.Partsdetail = Parts detail
1355 OpenRocketPrintable.Fintemplates = Fin templates
1356 OpenRocketPrintable.Transitiontemplates = Transition templates
1357 OpenRocketPrintable.Noseconetemplates = Nose Cone templates
1358 OpenRocketPrintable.Finmarkingguide = Fin marking guide
1359 OpenRocketPrintable.DesignReport = Design Report
1361 OpenRocketDocument.Redo = Redo
1362 OpenRocketDocument.Undo = Undo
1365 EllipticalFinSet.Ellipticalfinset = Elliptical fin set
1371 optimization.modifier.nosecone.length = Length
1372 optimization.modifier.nosecone.length.desc = Optimize the nose cone length.
1373 optimization.modifier.nosecone.diameter = Diameter
1374 optimization.modifier.nosecone.diameter.desc = Optimize the nose cone base diameter.
1375 optimization.modifier.nosecone.thickness = Thickness
1376 optimization.modifier.nosecone.thickness.desc = Optimize the nose cone wall thickness.
1377 optimization.modifier.nosecone.shapeparameter = Shape parameter
1378 optimization.modifier.nosecone.shapeparameter.desc = Optimize the nose cone shape parameter.
1380 optimization.modifier.transition.length = Length
1381 optimization.modifier.transition.length.desc = Optimize the transition length.
1382 optimization.modifier.transition.forediameter = Fore diameter
1383 optimization.modifier.transition.forediameter.desc = Optimize the transition fore diameter.
1384 optimization.modifier.transition.aftdiameter = Aft diameter
1385 optimization.modifier.transition.aftdiameter.desc = Optimize the transition aft diameter.
1386 optimization.modifier.transition.thickness = Thickness
1387 optimization.modifier.transition.thickness.desc = Optimize the transition wall thickness.
1388 optimization.modifier.transition.shapeparameter = Shape parameter
1389 optimization.modifier.transition.shapeparameter.desc = Optimize the transition shape parameter.
1391 optimization.modifier.bodytube.length = Length
1392 optimization.modifier.bodytube.length.desc = Optimize the body tube length.
1393 optimization.modifier.bodytube.outerDiameter = Outer diameter
1394 optimization.modifier.bodytube.outerDiameter.desc = Optimize the body tube outer diameter while maintaining the wall thickness.
1395 optimization.modifier.bodytube.thickness = Thickness
1396 optimization.modifier.bodytube.thickness.desc = Optimize the body tube wall thickness.
1398 optimization.modifier.trapezoidfinset.rootChord = Root chord
1399 optimization.modifier.trapezoidfinset.rootChord.desc = Optimize the root chord length of the fin set (length of fin at the rocket body).
1400 optimization.modifier.trapezoidfinset.tipChord = Tip chord
1401 optimization.modifier.trapezoidfinset.tipChord.desc = Optimize the tip chord length of the fin set (length of fin at outer edge).
1402 optimization.modifier.trapezoidfinset.sweep = Sweep
1403 optimization.modifier.trapezoidfinset.sweep.desc = Optimize the sweep of the fin set (distance that the leading edge sweeps backwards).
1404 optimization.modifier.trapezoidfinset.height = Height
1405 optimization.modifier.trapezoidfinset.height.desc = Optimize the height (semi-span) of the fin set.
1407 optimization.modifier.ellipticalfinset.length = Root chord
1408 optimization.modifier.ellipticalfinset.length.desc = Optimize the root chord length of the fin set.
1409 optimization.modifier.ellipticalfinset.height = Height
1410 optimization.modifier.ellipticalfinset.height.desc = Optimize the height (semi-span) of the fin set.
1412 optimization.modifier.finset.cant = Cant angle
1413 optimization.modifier.finset.cant.desc = Optimize the cant angle of the fin set.
1414 optimization.modifier.finset.position = Position
1415 optimization.modifier.finset.position.desc = Optimize the fin set position along the rocket body.
1417 optimization.modifier.launchlug.length = Length
1418 optimization.modifier.launchlug.length.desc = Optimize the launch lug length.
1419 optimization.modifier.launchlug.outerDiameter = Outer diameter
1420 optimization.modifier.launchlug.outerDiameter.desc = Optimize the outer diameter of the launch lug.
1421 optimization.modifier.launchlug.thickness = Thickness
1422 optimization.modifier.launchlug.thickness.desc = Optimize the launch lug thickness while keeping the outer diameter constant.
1423 optimization.modifier.launchlug.position = Position
1424 optimization.modifier.launchlug.position.desc = Optimize the launch lug position along the rocket body.
1427 optimization.modifier.internalcomponent.position = Position
1428 optimization.modifier.internalcomponent.position.desc = Optimize the position of the component relative to the parent component.
1430 optimization.modifier.masscomponent.mass = Mass
1431 optimization.modifier.masscomponent.mass.desc = Optimize the mass of the mass component.
1433 optimization.modifier.parachute.diameter = Diameter
1434 optimization.modifier.parachute.diameter.desc = Optimize the parachute canopy diameter.
1435 optimization.modifier.parachute.coefficient = Drag coefficient
1436 optimization.modifier.parachute.coefficient.desc = Optimize the drag coefficient of the parachute. Typical parachutes have a drag coefficient of about 0.8.
1438 optimization.modifier.streamer.length = Length
1439 optimization.modifier.streamer.length.desc = Optimize the length of the streamer.
1440 optimization.modifier.streamer.width = Width
1441 optimization.modifier.streamer.width.desc = Optimize the width of the streamer.
1442 optimization.modifier.streamer.aspectRatio = Aspect ratio
1443 optimization.modifier.streamer.aspectRatio.desc = Optimize the aspect ratio of the streamer (length/width). You should NOT select streamer length or width at the same time with the aspect ratio.
1444 optimization.modifier.streamer.coefficient = Drag coefficient
1445 optimization.modifier.streamer.coefficient.desc = Optimize the drag coefficient of the streamer.
1447 optimization.modifier.recoverydevice.deployDelay = Deployment delay
1448 optimization.modifier.recoverydevice.deployDelay.desc = Optimize the deployment delay of the recovery device.
1449 optimization.modifier.recoverydevice.deployAltitude = Deployment altitude
1450 optimization.modifier.recoverydevice.deployAltitude.desc = Optimize the deployment altitude of the recovery device.
1452 optimization.modifier.rocketcomponent.overrideMass = Override mass
1453 optimization.modifier.rocketcomponent.overrideMass.desc = Optimize the overridden mass of the component.
1454 optimization.modifier.rocketcomponent.overrideCG = Override CG
1455 optimization.modifier.rocketcomponent.overrideCG.desc = Optimize the overridden center of gravity of the component.
1457 optimization.modifier.motormount.overhang = Motor overhang
1458 optimization.modifier.motormount.overhang.desc = Optimize the motor overhang.
1459 optimization.modifier.motormount.delay = Motor ignition delay
1460 optimization.modifier.motormount.delay.desc = Optimize the motor ignition delay.
1465 ! General rocket design optimization dialog
1467 GeneralOptimizationDialog.title = Rocket optimization
1468 GeneralOptimizationDialog.goal.maximize = Maximize value
1469 GeneralOptimizationDialog.goal.minimize = Minimize value
1470 GeneralOptimizationDialog.goal.seek = Seek value of
1471 GeneralOptimizationDialog.btn.start = Start optimization
1472 GeneralOptimizationDialog.btn.stop = Stop optimization
1473 GeneralOptimizationDialog.lbl.paramsToOptimize = Parameters to optimize:
1474 GeneralOptimizationDialog.btn.add = Add
1475 GeneralOptimizationDialog.btn.add.ttip = Add the selected parameter to the optimization
1476 GeneralOptimizationDialog.btn.remove = Remove
1477 GeneralOptimizationDialog.btn.remove.ttip = Remove the selected parameter from the optimization
1478 GeneralOptimizationDialog.btn.removeAll = Remove all
1479 GeneralOptimizationDialog.btn.removeAll.ttip = Remove all parameters from the optimization
1480 GeneralOptimizationDialog.lbl.availableParams = Available parameters:
1481 GeneralOptimizationDialog.lbl.optimizationOpts = Optimization options
1482 GeneralOptimizationDialog.lbl.optimizeSim = Optimize simulation:
1483 GeneralOptimizationDialog.lbl.optimizeSim.ttip = Select which simulation to optimize
1484 GeneralOptimizationDialog.lbl.optimizeValue = Optimized value:
1485 GeneralOptimizationDialog.lbl.optimizeValue.ttip = Select what value is to be optimized
1486 GeneralOptimizationDialog.lbl.optimizeGoal = Optimization goal:
1487 GeneralOptimizationDialog.lbl.optimizeGoal.ttip = Select the goal of the optimization
1488 GeneralOptimizationDialog.lbl.optimizeGoalValue.ttip = Custom value to seek
1489 GeneralOptimizationDialog.lbl.requireStability = Required stability
1490 GeneralOptimizationDialog.lbl.requireMinStability = Minimum stability:
1491 GeneralOptimizationDialog.lbl.requireMinStability.ttip = Require a minimum static stability margin for the design
1492 GeneralOptimizationDialog.lbl.requireMaxStability = Maximum stability:
1493 GeneralOptimizationDialog.lbl.requireMaxStability.ttip = Require a maximum static stability margin for the design
1494 GeneralOptimizationDialog.status.bestValue = Best value:
1495 GeneralOptimizationDialog.status.bestValue.ttip = Best optimization value found so far.
1496 GeneralOptimizationDialog.status.stepCount = Step count:
1497 GeneralOptimizationDialog.status.stepCount.ttip = Number of optimization steps that have been performed.
1498 GeneralOptimizationDialog.status.evalCount = Evaluations:
1499 GeneralOptimizationDialog.status.evalCount.ttip = Total number of function evaluations (simulations) that have been performed.
1500 GeneralOptimizationDialog.status.stepSize = Step size:
1501 GeneralOptimizationDialog.status.stepSize.ttip = Current optimization step size (relative to the optimization parameter ranges)
1502 GeneralOptimizationDialog.btn.plotPath = Plot path
1503 GeneralOptimizationDialog.btn.plotPath.ttip = Plot the optimization path (one and two dimensional optimization only)
1504 GeneralOptimizationDialog.btn.save = Save path
1505 GeneralOptimizationDialog.btn.save.ttip = Save the results of the function evaluations (simulations) as a CSV file.
1506 GeneralOptimizationDialog.btn.apply = Apply optimization
1507 GeneralOptimizationDialog.btn.apply.ttip = Apply the optimization results to the rocket design
1508 GeneralOptimizationDialog.btn.reset = Reset
1509 GeneralOptimizationDialog.btn.reset.ttip = Reset the rocket design to the current rocket design
1510 GeneralOptimizationDialog.btn.close = Close
1511 GeneralOptimizationDialog.btn.close.ttip = Close the dialog without modifying the rocket design
1512 GeneralOptimizationDialog.error.selectParams.text = First select some parameters to optimize from the available parameters.
1513 GeneralOptimizationDialog.error.selectParams.title = Select optimization parameters
1514 GeneralOptimizationDialog.error.optimizationFailure.text = The optimization failed to run:
1515 GeneralOptimizationDialog.error.optimizationFailure.title = Optimization failed
1516 GeneralOptimizationDialog.undoText = Apply optimization
1517 GeneralOptimizationDialog.basicSimulationName = Basic simulation
1518 GeneralOptimizationDialog.noSimulationName = No simulation
1519 GeneralOptimizationDialog.table.col.parameter = Parameter
1520 GeneralOptimizationDialog.table.col.current = Current
1521 GeneralOptimizationDialog.table.col.min = Minimum
1522 GeneralOptimizationDialog.table.col.max = Maximum
1523 GeneralOptimizationDialog.export.header = Include header line
1524 GeneralOptimizationDialog.export.header.ttip = Include a header line as the first line containing the field descriptions.
1525 GeneralOptimizationDialog.export.stability = Stability
1528 ! Dialog for plotting optimization results
1529 OptimizationPlotDialog.title = Optimization results
1530 OptimizationPlotDialog.lbl.zoomInstructions = Click and drag down+right to zoom in, up+left to zoom out
1531 OptimizationPlotDialog.plot1d.title = Optimization result
1532 OptimizationPlotDialog.plot1d.series = Optimization result
1533 OptimizationPlotDialog.plot2d.title = Optimization path
1534 OptimizationPlotDialog.plot2d.path = Optimization path
1535 OptimizationPlotDialog.plot2d.evals = Evaluations
1536 OptimizationPlotDialog.plot.ttip.stability = Stability:
1537 OptimizationPlotDialog.plot.label.optimum = Optimum
1539 ! Optimization parameters
1540 MaximumAltitudeParameter.name = Apogee altitude
1541 MaximumVelocityParameter.name = Maximum velocity
1542 MaximumAccelerationParameter.name = Maximum acceleration
1543 StabilityParameter.name = Stability
1544 GroundHitVelocityParameter.name = Ground hit speed
1545 LandingDistanceParameter.name = Landing distance
1546 TotalFlightTimeParameter.name = Total flight time
1547 DeploymentVelocityParameter.name = Velocity at parachute deployment
1550 ! Compass directions drawn on a compass rose.
1551 CompassRose.lbl.north = N
1552 CompassRose.lbl.east = E
1553 CompassRose.lbl.south = S
1554 CompassRose.lbl.west = W
1556 ! Compass directions with subdirections. These might not be localized even if the directions on the compass rose are.
1557 CompassSelectionButton.lbl.N = N
1558 CompassSelectionButton.lbl.NE = NE
1559 CompassSelectionButton.lbl.E = E
1560 CompassSelectionButton.lbl.SE = SE
1561 CompassSelectionButton.lbl.S = S
1562 CompassSelectionButton.lbl.SW = SW
1563 CompassSelectionButton.lbl.W = W
1564 CompassSelectionButton.lbl.NW = NW
1567 SlideShowDialog.btn.next = Next
1568 SlideShowDialog.btn.prev = Previous
1570 SlideShowLinkListener.error.title = Guided tour not found
1571 SlideShowLinkListener.error.msg = Sorry, the selected tour has not yet been written.
1573 GuidedTourSelectionDialog.title = Guided tours
1574 GuidedTourSelectionDialog.lbl.selectTour = Select guided tour:
1575 GuidedTourSelectionDialog.lbl.description = Tour description:
1576 GuidedTourSelectionDialog.lbl.length = Number of slides:
1577 GuidedTourSelectionDialog.btn.start = Start tour!
1580 ! Custom Fin BMP Importer
1581 CustomFinImport.button.label = Import from image
1582 CustomFinImport.badFinImage = Invalid fin image. Make sure the fin is a solid black or dark color and touching the bottom of the image.
1583 CustomFinImport.errorLoadingFile = Error loading file:
1584 CustomFinImport.errorParsingFile = Error parsing fin image:
1585 CustomFinImport.undo = Import freeform fin set
1586 CustomFinImport.error.title = Error loading fin profile
1587 CustomFinImport.error.badimage = Could not deduce fin shape from image.
1588 CustomFinImport.description = The image will be converted internally to black and white image (black for the fin), so make sure you use a solid dark color for the fin, and white or a light color for the background. The fin must be touching the bottom of the image, which is the base of the fin.
1591 PresetModel.lbl.select = Select preset:
1592 PresetModel.lbl.database = From database...
projects / debian / openrocket / blob