3 # English base translation file
5 # Should you need to add new logical keys here is the proposed method
7 # className.ComponentType.componentName
10 # Text tokens within braces should not be translated, e.g.
11 # "The file '{filename}' exists."
12 # They are pieces that are inserted dynamically.
16 ! Set to the name of the current translation file (used for debugging purposes)
17 debug.currentFile = messages.properties
20 RocketActions.checkbox.Donotaskmeagain = Do not ask me again
21 RocketActions.lbl.Youcanchangedefop = You can change the default operation in the preferences.
22 RocketActions.showConfirmDialog.lbl1 = Delete the selected simulations?
23 RocketActions.showConfirmDialog.lbl2 = <html><i>This operation cannot be undone.</i>
24 RocketActions.showConfirmDialog.title = Delete simulations
25 RocketActions.DelCompAct.Delete = Delete
26 RocketActions.DelCompAct.ttip.Delete = Delete the selected component.
27 RocketActions.DelSimuAct.Delete = Delete
28 RocketActions.DelSimuAct.ttip.Delete = Delete the selected simulation.
29 RocketActions.DelAct.Delete = Delete
30 RocketActions.DelAct.ttip.Delete = Delete the selected component or simulation.
31 RocketActions.CutAction.Cut = Cut
32 RocketActions.CutAction.ttip.Cut = Cut this component or simulation to the clipboard and remove from this design
33 RocketActions.CopyAct.Copy = Copy
34 RocketActions.CopyAct.ttip.Copy = Copy this component (and subcomponents) to the clipboard.
35 RocketActions.PasteAct.Paste = Paste
36 RocketActions.PasteAct.ttip.Paste = Paste the component or simulation on the clipboard to the design.
37 RocketActions.EditAct.Edit = Edit
38 RocketActions.EditAct.ttip.Edit = Edit the selected component.
39 RocketActions.NewStageAct.Newstage = New stage
40 RocketActions.NewStageAct.ttip.Newstage = Add a new stage to the rocket design.
41 RocketActions.ActBoosterstage = Booster stage
42 RocketActions.MoveUpAct.Moveup = Move up
43 RocketActions.MoveUpAct.ttip.Moveup = Move this component upwards.
44 RocketActions.MoveDownAct.Movedown = Move down
45 RocketActions.MoveDownAct.ttip.Movedown = Move this component downwards.
48 RocketPanel.FigTypeAct.Sideview = Side view
49 RocketPanel.FigTypeAct.ttip.Sideview = Side view
50 RocketPanel.FigTypeAct.Backview = Back view
51 RocketPanel.FigTypeAct.ttip.Backview = Rear view
52 RocketPanel.FigViewAct.2D = 2D View
53 RocketPanel.FigViewAct.ttip.2D = 2D View
54 RocketPanel.FigViewAct.3D = 3D View
55 RocketPanel.FigViewAct.ttip.3D = 3D View
56 RocketPanel.lbl.Motorcfg = Motor configuration:
57 RocketPanel.lbl.infoMessage = <html>Click to select Shift+click to select other Double-click to edit Click+drag to move
61 BasicFrame.tab.Rocketdesign = Rocket design
62 BasicFrame.tab.Flightsim = Flight simulations
63 BasicFrame.title.Addnewcomp = Add new component
64 BasicFrame.dlg.lbl1 = Design '
65 BasicFrame.dlg.lbl2 = ' has not been saved.
66 BasicFrame.dlg.lbl3 = Do you want to save it?
67 BasicFrame.dlg.title = Design not saved
68 BasicFrame.StageName.Sustainer = Sustainer
69 BasicFrame.WarningDialog.txt1 = The following problems were encountered while opening
70 BasicFrame.WarningDialog.txt2 = Some design features may not have been loaded correctly.
71 BasicFrame.WarningDialog.title = Warnings while opening file
74 ! General error messages used in multiple contexts
75 error.fileExists.title = File exists
76 error.fileExists.desc = File '{filename}' exists. Do you want to overwrite it?
78 error.writing.title = Error writing file
79 error.writing.desc = An error occurred while writing to the file:
82 ! Labels used in buttons of dialog windows
83 # TODO: Rename these to "btn.xxx"
85 button.cancel = Cancel
88 ! Common labels used in buttons of dialog windows
90 dlg.but.cancel = Cancel
94 ! General file type names
95 filetypes.pdf = PDF files (*.pdf)
96 BasicFrame.SimpleFileFilter1 = All rocket designs (*.ork; *.rkt)
97 BasicFrame.SimpleFileFilter2 = OpenRocket designs (*.ork)
98 BasicFrame.SimpleFileFilter3 = RockSim designs (*.rkt)
99 filetypes.images = Image files
103 AboutDialog.lbl.version = Version
104 ! The texts below provide additional credits for the translation maintainer
105 ! - In AboutDialog.lbl.translation replace "English" with the current language.
106 ! - AboutDialog.lbl.translator is the translator / group name (may be empty)
107 ! - AboutDialog.lbl.translatorWebsite is a URL to the translator / group (may be empty)
108 ! - AboutDialog.lbl.translatorIcon is the file name of an icon under pix/translators/ (may be empty)
109 AboutDialog.lbl.translation = English translation by:
110 AboutDialog.lbl.translator =
111 AboutDialog.lbl.translatorWebsite =
112 AboutDialog.lbl.translatorIcon =
116 PrintDialog.title = Print or export
117 PrintDialog.but.previewAndPrint = Preview & Print
118 PrintDialog.checkbox.showByStage = Show by stage
119 PrintDialog.lbl.selectElements = Select elements to include:
120 printdlg.but.saveaspdf = Save as PDF
121 printdlg.but.preview = Preview
122 printdlg.but.settings = Settings
123 PrintDialog.error.preview.title = Unable to open preview
124 PrintDialog.error.preview.desc1 = Unable to open PDF preview.
125 PrintDialog.error.preview.desc2 = Please use the "Save as PDF" option instead.
129 PrintSettingsDialog.title = Print settings
130 PrintSettingsDialog.lbl.Templatefillcolor = Template fill color:
131 PrintSettingsDialog.lbl.Templatebordercolor = Template border color:
132 PrintSettingsDialog.lbl.Papersize = Paper size:
133 PrintSettingsDialog.lbl.Paperorientation = Paper orientation:
134 PrintSettingsDialog.but.Reset = Reset
135 PrintSettingsDialog.but.Close = Close
139 bugreport.dlg.title = Bug report
140 bugreport.dlg.but.Sendbugreport = Send bug report
141 bugreport.dlg.but.Sendbugreport.Ttip = Automatically send the bug report to the OpenRocket developers.
142 bugreport.dlg.successmsg1 = Bug report successfully sent.
143 bugreport.dlg.successmsg2 = Thank you for helping make OpenRocket better!
144 bugreport.dlg.successmsg3 = Bug report sent
145 bugreport.dlg.connectedInternet = <html>If connected to the Internet, you can simply click <em>Send bug report</em>.
146 bugreport.dlg.otherwise = Otherwise, send the text below to the address:
147 bugreport.lbl.Theinformation = The information above may be included in a public bug report. Make sure it does not contain any sensitive information you do not want to be made public.
148 bugreport.dlg.failedmsg1 = OpenRocket was unable to send the bug report:
149 bugreport.dlg.failedmsg2 = Please send the report manually to
150 bugreport.dlg.failedmsg3 = Error sending report
151 bugreport.reportDialog.txt = <html><b>You can report a bug in OpenRocket by filling in and submitting the form below.</b><br>You can also report bugs and include attachments on the project web site.
152 bugreport.reportDialog.txt2 = <html><b>Please include a short description about what you were doing when the exception occurred.</b>
153 bugreport.dlg.provideDescription = Please provide a description of the bug first.
154 bugreport.dlg.provideDescription.title = Bug description missing
158 debuglogdlg.but.clear = Clear
159 debuglogdlg.OpenRocketdebuglog = OpenRocket debug log
160 debuglogdlg.Displayloglines = Display log lines:
161 debuglogdlg.Follow = Follow
162 debuglogdlg.col.Time = Time
163 debuglogdlg.col.Level = Level
164 debuglogdlg.col.Location = Location
165 debuglogdlg.col.Message = Message
166 debuglogdlg.lbl.Loglinenbr = Log line number:
167 debuglogdlg.lbl.Time = Time:
168 debuglogdlg.lbl.Level = Level:
169 debuglogdlg.lbl.Location = Location:
170 debuglogdlg.lbl.Logmessage = Log message:
171 debuglogdlg.lbl.Stacktrace = Stack trace:
174 ! Edit Motor configuration dialog
175 edtmotorconfdlg.but.removemotor = Remove motor
176 edtmotorconfdlg.but.Selectmotor = Select motor
177 edtmotorconfdlg.but.Removeconfiguration = Remove configuration
178 edtmotorconfdlg.but.Newconfiguration = New configuration
179 edtmotorconfdlg.lbl.Motormounts = <html><b>Motor mounts:</b>
180 edtmotorconfdlg.title.Editmotorconf = Edit motor configurations
181 edtmotorconfdlg.selectcomp = <html>Select which components function as motor mounts:
182 edtmotorconfdlg.lbl.Motorconfig = <html><b>Motor configurations:</b>
183 edtmotorconfdlg.lbl.Configname = Configuration name:
184 edtmotorconfdlg.lbl.Leavenamedefault = Leave name empty for default.
186 ! Example design dialog
187 exdesigndlg.but.open = Open
188 exdesigndlg.lbl.Selectexample = Select example designs to open:
189 exdesigndlg.lbl.Openexampledesign = Open example design
190 exdesigndlg.lbl.Exampledesignsnotfound = Example designs could not be found.
191 exdesigndlg.lbl.Examplesnotfound = Examples not found
194 ! Material edit panel
195 matedtpan.but.new = New
196 matedtpan.but.edit = Edit
197 matedtpan.but.delete = Delete
198 matedtpan.but.revertall = Revert all
199 matedtpan.col.Material = Material
200 matedtpan.col.Type = Type
201 matedtpan.col.Density = Density
202 matedtpan.col.but.ttip.New = Add a new material
203 matedtpan.title.Addcustmaterial = Add a custom material
204 matedtpan.but.ttip.edit = Edit an existing material
205 matedtpan.title.Editmaterial = Edit material
206 matedtpan.title2.Editmaterial = The built-in materials cannot be modified.
207 matedtpan.but.ttip.delete = Delete a user-defined material
208 matedtpan.but.ttip.revertall = Delete all user-defined materials
209 matedtpan.title.Deletealluser-defined = Delete all user-defined materials?
210 matedtpan.title.Revertall = Revert all?
211 matedtpan.lbl.edtmaterials = Editing materials will not affect existing rocket designs.
214 MaterialModel.title.Material = Material
215 MaterialModel.title.Defcustmat = Define custom material
219 pref.dlg.but.add = Add
220 pref.dlg.but.reset = Reset
221 pref.dlg.but.checknow = Check now
222 pref.dlg.but.defaultmetric = Default metric
223 pref.dlg.but.defaultimperial = Default imperial
224 pref.dlg.title.Preferences = Preferences
225 pref.dlg.tab.Units = Units
226 pref.dlg.tab.Defaultunits = Default units
227 pref.dlg.tab.Materials = Materials
228 pref.dlg.tab.Custommaterials = Custom materials
229 pref.dlg.tab.Options = Options
230 pref.dlg.tab.Miscellaneousoptions = Miscellaneous options
231 pref.dlg.lbl.Positiontoinsert = Position to insert new body components:
232 pref.dlg.lbl.Confirmdeletion = Confirm deletion of simulations:
233 pref.dlg.lbl.User-definedthrust = User-defined thrust curves:
234 pref.dlg.Allthrustcurvefiles = All thrust curve files (*.eng; *.rse; *.zip; directories)
235 pref.dlg.RASPfiles = RASP motor files (*.eng)
236 pref.dlg.RockSimfiles = RockSim engine files (*.rse)
237 pref.dlg.ZIParchives = ZIP archives (*.zip)
238 pref.dlg.checkbox.Checkupdates = Check for software updates at startup
239 pref.dlg.ttip.Checkupdatesnow = Check for software updates now
240 pref.dlg.lbl.Selectprefunits = Select your preferred units:
241 pref.dlg.lbl.Rocketdimensions = Rocket dimensions:
242 pref.dlg.lbl.Linedensity = Line density:
243 pref.dlg.lbl.Motordimensions = Motor dimensions:
244 pref.dlg.lbl.Surfacedensity = Surface density:
245 pref.dlg.lbl.Distance = Distance:
246 pref.dlg.lbl.Bulkdensity = Bulk density:
247 pref.dlg.lbl.Velocity = Velocity:
248 pref.dlg.lbl.Surfaceroughness = Surface roughness:
249 pref.dlg.lbl.Acceleration = Acceleration:
250 pref.dlg.lbl.Area = Area:
251 pref.dlg.lbl.Mass = Mass:
252 pref.dlg.lbl.Angle = Angle:
253 pref.dlg.lbl.Force = Force:
254 pref.dlg.lbl.Rollrate = Roll rate:
255 pref.dlg.lbl.Totalimpulse = Total impulse:
256 pref.dlg.lbl.Temperature = Temperature:
257 pref.dlg.lbl.Momentofinertia = Moment of inertia:
258 pref.dlg.lbl.Pressure = Pressure:
259 pref.dlg.lbl.Stability = Stability:
260 pref.dlg.lbl.FlightTime = Flight time:
261 pref.dlg.lbl.effect1 = The effects will take place the next time you open a window.
262 pref.dlg.lbl.Checkingupdates = Checking for updates...
263 pref.dlg.lbl.msg1 = An error occurred while communicating with the server.
264 pref.dlg.lbl.msg2 = Unable to retrieve update information
265 pref.dlg.lbl.msg3 = You are running the latest version of OpenRocket.
266 pref.dlg.lbl.msg4 = No updates available
267 pref.dlg.PrefChoiseSelector1 = Always ask
268 pref.dlg.PrefChoiseSelector2 = Insert in middle
269 pref.dlg.PrefChoiseSelector3 = Add to end
270 pref.dlg.PrefBooleanSelector1 = Delete
271 pref.dlg.PrefBooleanSelector2 = Confirm
273 pref.dlg.DescriptionArea.Adddirectories = Add directories, RASP motor files (*.eng), RockSim engine files (*.rse) or ZIP archives separated by a semicolon (;) to load external thrust curves. Changes will take effect the next time you start OpenRocket.
275 PreferencesDialog.lbl.language = Interface language:
276 PreferencesDialog.languages.default = System default
277 PreferencesDialog.lbl.languageEffect = The language will change the next time you start OpenRocket.
279 ! Simulation edit dialog
280 simedtdlg.but.runsimulation = Run simulation
281 simedtdlg.but.resettodefault = Reset to default
282 simedtdlg.but.add = Add
283 simedtdlg.but.remove = Remove
284 simedtdlg.title.Editsim = Edit simulation
285 simedtdlg.lbl.Simname = Simulation name:
286 simedtdlg.tab.Launchcond = Launch conditions
287 simedtdlg.tab.Simopt = Simulation options
288 simedtdlg.tab.Plotdata = Plot data
289 simedtdlg.tab.Exportdata = Export data
290 simedtdlg.lbl.Motorcfg = Motor configuration:
291 simedtdlg.lbl.ttip.Motorcfg = Select the motor configuration to use.
292 simedtdlg.combo.ttip.motorconf = Select the motor configuration to use.
293 simedtdlg.lbl.Wind = Wind
294 simedtdlg.lbl.Averwindspeed = Average windspeed:
295 simedtdlg.lbl.ttip.Averwindspeed = The average windspeed relative to the ground.
296 simedtdlg.lbl.Stddeviation = Standard deviation:
297 simedtdlg.lbl.ttip.Stddeviation = <html>The standard deviation of the windspeed.<br>The windspeed is within twice the standard deviation from the average for 95% of the time.
298 simedtdlg.lbl.Turbulenceintensity = Turbulence intensity:
299 simedtdlg.lbl.ttip.Turbulenceintensity1 = <html>The turbulence intensity is the standard deviation divided by the average windspeed.<br>
300 simedtdlg.lbl.ttip.Turbulenceintensity2 = Typical values range from
301 simedtdlg.lbl.ttip.Turbulenceintensity3 = to
302 simedtdlg.border.Atmoscond = Atmospheric conditions
303 simedtdlg.checkbox.InterStdAtmosphere = Use International Standard Atmosphere
304 simedtdlg.checkbox.ttip.InterStdAtmosphere1 = <html>Select to use the International Standard Atmosphere model.<br>This model has a temperature of
305 simedtdlg.checkbox.ttip.InterStdAtmosphere2 = and a pressure of
306 simedtdlg.checkbox.ttip.InterStdAtmosphere3 = at sea level.
307 simedtdlg.lbl.Temperature = Temperature:
308 simedtdlg.lbl.ttip.Temperature = The temperature at the launch site.
309 simedtdlg.lbl.Pressure = Pressure:
310 simedtdlg.lbl.ttip.Pressure = The atmospheric pressure at the launch site.
311 simedtdlg.lbl.Launchsite = Launch site
312 simedtdlg.lbl.Latitude = Latitude:
313 simedtdlg.lbl.ttip.Latitude = <html>The launch site latitude affects the gravitational pull of Earth.<br>Positive values are on the Northern hemisphere, negative values on the Southern hemisphere.
315 simedtdlg.lbl.Longitude = Longitude:
316 simedtdlg.lbl.ttip.Longitude = <html>Required for weather prediction and elevation models.
318 simedtdlg.lbl.Altitude = Altitude:
319 simedtdlg.lbl.ttip.Altitude = <html>The launch altitude above mean sea level.<br>This affects the position of the rocket in the atmospheric model.
320 simedtdlg.border.Launchrod = Launch rod
321 simedtdlg.lbl.Length = Length:
322 simedtdlg.lbl.ttip.Length = The length of the launch rod.
323 simedtdlg.lbl.Angle = Angle:
324 simedtdlg.lbl.ttip.Angle = The angle of the launch rod from vertical.
325 simedtdlg.lbl.Direction = Direction:
326 simedtdlg.lbl.ttip.Direction1 = <html>Direction of the launch rod relative to the wind.<br>
327 simedtdlg.lbl.ttip.Direction2 = = towards the wind,
328 simedtdlg.lbl.ttip.Direction3 = = downwind.
329 simedtdlg.border.Simopt = Simulator options
330 simedtdlg.lbl.Calcmethod = Calculation method:
331 simedtdlg.lbl.ttip.Calcmethod = <html>The Extended Barrowman method calculates aerodynamic forces according <br>to the Barrowman equations extended to accommodate more components.
332 simedtdlg.lbl.ExtBarrowman = Extended Barrowman
333 simedtdlg.lbl.Simmethod = Simulation method:
334 simedtdlg.lbl.ttip.Simmethod1 = <html>The six degree-of-freedom simulator allows the rocket total freedom during flight.<br>
335 simedtdlg.lbl.ttip.Simmethod2 = Integration is performed using a 4<sup>th</sup> order Runge-Kutta 4 numerical integration.
336 simedtdlg.lbl.GeodeticMethod = Geodetic calculations:
337 simedtdlg.lbl.ttip.GeodeticMethodTip = Relate to the calculation of coordinates on the earth. This also enables coriolis effect computations.
338 simedtdlg.lbl.Timestep = Time step:
339 simedtdlg.lbl.ttip.Timestep1 = <html>The time between simulation steps.<br>A smaller time step results in a more accurate but slower simulation.<br>
340 simedtdlg.lbl.ttip.Timestep2 = The 4<sup>th</sup> order simulation method is quite accurate with a time step of
341 simedtdlg.but.ttip.resettodefault = Reset the time step to its default value (
342 simedtdlg.border.Simlist = Simulator listeners
343 simedtdlg.txt.longA1 = <html><i>Simulation listeners</i> is an advanced feature that allows user-written code to listen to and interact with the simulation.
344 simedtdlg.txt.longA2 = For details on writing simulation listeners, see the OpenRocket technical documentation.
345 simedtdlg.lbl.Curlist = Current listeners:
346 simedtdlg.lbl.Addsimlist = Add simulation listener
347 simedtdlg.lbl.Noflightdata = No flight data available.
348 simedtdlg.lbl.runsimfirst = Please run the simulation first.
349 simedtdlg.chart.Simflight = Simulated flight
350 simedtdlg.dlg.Simres = Simulation results
351 simedtdlg.IntensityDesc.None = None
352 simedtdlg.IntensityDesc.Verylow = Very low
353 simedtdlg.IntensityDesc.Low = Low
354 simedtdlg.IntensityDesc.Medium = Medium
355 simedtdlg.IntensityDesc.High = High
356 simedtdlg.IntensityDesc.Veryhigh = Very high
357 simedtdlg.IntensityDesc.Extreme = Extreme
359 GeodeticComputationStrategy.flat.name = Flat Earth
360 GeodeticComputationStrategy.flat.desc = Perform computations with a flat Earth approximation. Sufficient for low-altitude flights.
361 GeodeticComputationStrategy.spherical.name = Spherical approximation
362 GeodeticComputationStrategy.spherical.desc = <html>Perform geodetic computations assuming a spherical Earth.<br>This is sufficiently accurate for almost all purposes.
363 GeodeticComputationStrategy.wgs84.name = WGS84 ellipsoid
364 GeodeticComputationStrategy.wgs84.desc = <html>Perform geodetic computations on the WGS84 reference ellipsoid using Vincenty's method.<br>Slower and unnecessary in most cases.
370 simpanel.but.newsimulation = New simulation
371 simpanel.but.editsimulation = Edit simulation
372 simpanel.but.runsimulations = Run simulations
373 simpanel.but.deletesimulations = Delete simulations
374 simpanel.but.plotexport = Plot / export
375 simpanel.but.ttip.newsimulation = Add a new simulation
376 simpanel.but.ttip.editsim = Edit the selected simulation
377 simpanel.but.ttip.runsimu = Re-run the selected simulations
378 simpanel.but.ttip.deletesim = Delete the selected simulations
379 simpanel.checkbox.donotask = Do not ask me again
380 simpanel.lbl.defpref = You can change the default operation in the preferences.
381 simpanel.dlg.lbl.DeleteSim1 = Delete the selected simulations?
382 simpanel.dlg.lbl.DeleteSim2 = <html><i>This operation cannot be undone.</i>
383 simpanel.dlg.lbl.DeleteSim3 = Delete simulations
384 simpanel.col.Name = Name
385 simpanel.col.Motors = Motors
386 simpanel.col.Velocityoffrod = Velocity off rod
387 simpanel.col.Velocityatdeploy = Velocity at deployment
388 simpanel.col.Apogee = Apogee
389 simpanel.col.Maxvelocity = Max. velocity
390 simpanel.col.Maxacceleration = Max. acceleration
391 simpanel.col.Timetoapogee = Time to apogee
392 simpanel.col.Flighttime = Flight time
393 simpanel.col.Groundhitvelocity = Ground hit velocity
395 ! SimulationRunDialog
396 SimuRunDlg.title.RunSim = Running simulations...
397 SimuRunDlg.lbl.Running = Running ...
398 SimuRunDlg.lbl.Simutime = Simulation time:
399 SimuRunDlg.lbl.Altitude = Altitude:
400 SimuRunDlg.lbl.Velocity = Velocity:
401 SimuRunDlg.msg.Unabletosim = Unable to simulate:
402 SimuRunDlg.msg.errorOccurred = An error occurred during the simulation:
403 SimuRunDlg.msg.AnException1 = An exception occurred during the simulation:
404 SimuRunDlg.msg.AnException2 = Please report this as a bug along with the details below.
405 SimuRunDlg.msg.AssertionError1 = A computation error occurred during the simulation.
406 SimuRunDlg.msg.AssertionError2 = Please report this as a bug along with the details below.
407 SimuRunDlg.msg.unknownerror1 = An unknown error was encountered during the simulation.
408 SimuRunDlg.msg.unknownerror2 = The program may be unstable, you should save all your designs and restart OpenRocket now!
411 RK4SimulationStepper.error.valuesTooLarge = Simulation values exceeded limits. Try selecting a shorter time step.
414 ! SimulationExportPanel
415 SimExpPan.desc = Comma Separated Files (*.csv)
416 SimExpPan.border.Vartoexport = Variables to export
417 SimExpPan.but.Selectall = Select all
418 SimExpPan.but.Selectnone = Select none
419 SimExpPan.border.Fieldsep = Field separator
420 SimExpPan.lbl.Fieldsepstr = Field separator string:
421 SimExpPan.lbl.longA1 = <html>The string used to separate the fields in the exported file.<br>
422 SimExpPan.lbl.longA2 = Use ',' for a Comma Separated Values (CSV) file.
423 SimExpPan.checkbox.Includesimudesc = Include simulation description
424 SimExpPan.checkbox.ttip.Includesimudesc = Include a comment at the beginning of the file describing the simulation.
425 SimExpPan.border.Comments = Comments
426 SimExpPan.checkbox.Includefielddesc = Include field descriptions
427 SimExpPan.checkbox.ttip.Includefielddesc = Include a comment line with the descriptions of the exported variables.
428 SimExpPan.checkbox.Incflightevents = Include flight events
429 SimExpPan.checkbox.ttip.Incflightevents = Include a comment line for every flight event.
430 SimExpPan.lbl.Commentchar = Comment character:
431 SimExpPan.lbl.ttip.Commentchar = The character(s) that mark a comment line.
432 SimExpPan.but.Exporttofile = Export to file...
433 SimExpPan.Fileexists.desc1 = File \"
434 SimExpPan.Fileexists.desc2 = \" exists. Overwrite?
435 SimExpPan.Fileexists.title = File exists
436 SimExpPan.ExportingVar.desc1 = Exporting 1 variable out of
437 SimExpPan.ExportingVar.desc2 = Exporting
438 SimExpPan.ExportingVar.desc3 = variables out of
439 SimExpPan.Col.Variable = Variable
440 SimExpPan.Col.Unit = Unit
443 CsvOptionPanel.separator.space = SPACE
444 CsvOptionPanel.separator.tab = TAB
449 MotorPlot.title.Motorplot = Motor plot
450 MotorPlot.but.Select = Select
451 MotorPlot.Chart.Motorthrustcurve = Motor thrust curve
452 MotorPlot.Chart.Time = Time / s
453 MotorPlot.Chart.Thrust = Thrust / N
454 MotorPlot.txt.Designation = Designation:
455 MotorPlot.txt.Manufacturer = Manufacturer:
456 MotorPlot.txt.Type = Type:
457 MotorPlot.txt.Delays = Delays:
458 MotorPlot.txt.Comment = Comment:\n
462 ! Simulation plot panel
463 simplotpanel.lbl.Presetplotconf = Preset plot configurations:
464 simplotpanel.lbl.Xaxistype = X axis type:
465 simplotpanel.lbl.Unit = Unit:
466 simplotpanel.lbl.Yaxistypes = Y axis types:
467 simplotpanel.lbl.Flightevents = Flight events:
468 simplotpanel.but.All = All
469 simplotpanel.but.None = None
470 simplotpanel.but.NewYaxisplottype = New Y axis plot type
471 simplotpanel.but.Plotflight = Plot flight
472 simplotpanel.lbl.Axis = Axis:
473 simplotpanel.but.ttip.Removethisplot = Remove this plot
474 simplotpanel.Desc = The data will be plotted in time order even if the X axis type is not time.
475 simplotpanel.OptionPane.lbl1 = A maximum of 15 plots is allowed.
476 simplotpanel.OptionPane.lbl2 = Cannot add plot
477 simplotpanel.AUTO_NAME = Auto
478 simplotpanel.LEFT_NAME = Left
479 simplotpanel.RIGHT_NAME = Right
480 simplotpanel.CUSTOM = Custom
481 SimulationPlotPanel.error.noPlotSelected = Please add one or more variables to plot on the Y-axis.
482 SimulationPlotPanel.error.noPlotSelected.title = Nothing to plot
485 ! Component add buttons
486 compaddbuttons.Bodycompandfinsets = Body components and fin sets
487 compaddbuttons.Nosecone = Nose cone
488 compaddbuttons.Bodytube = Body tube
489 compaddbuttons.Transition = Transition
490 compaddbuttons.Trapezoidal = Trapezoidal
491 compaddbuttons.Elliptical = Elliptical
492 compaddbuttons.Freeform = Freeform
493 compaddbuttons.Launchlug = Launch lug
494 compaddbuttons.Innercomponent = Inner component
495 compaddbuttons.Innertube = Inner tube
496 compaddbuttons.Coupler = Coupler
497 compaddbuttons.Centeringring = Centering\nring
498 compaddbuttons.Bulkhead = Bulkhead
499 compaddbuttons.Engineblock = Engine\nblock
500 compaddbuttons.Massobjects = Mass objects
501 compaddbuttons.Parachute = Parachute
502 compaddbuttons.Streamer = Streamer
503 compaddbuttons.Shockcord = Shock cord
504 compaddbuttons.Masscomponent = Mass\ncomponent
505 compaddbuttons.Donotaskmeagain = Do not ask me again
506 compaddbuttons.Selectcomppos = Select component position
507 compaddbuttons.lbl.Youcanchange = You can change the default operation in the preferences.
508 compaddbuttons.lbl.insertcomp = Insert the component after the current component or as the last component?
509 compaddbuttons.askPosition.Inserthere = Insert here
510 compaddbuttons.askPosition.Addtotheend = Add to the end
511 compaddbuttons.askPosition.Cancel = Cancel
513 ! Component Analysis Dialog
514 componentanalysisdlg.componentanalysis = Component analysis
515 componentanalysisdlg.lbl.winddir = Wind direction:
516 componentanalysisdlg.TitledBorder.warnings = Warnings:
517 componentanalysisdlg.ToggleBut.worst = Worst
518 componentanalysisdlg.lbl.angleofattack = Angle of attack:
519 componentanalysisdlg.lbl.machnumber = Mach number:
520 componentanalysisdlg.lbl.rollrate = Roll rate:
521 componentanalysisdlg.lbl.activestages = Active stages:
522 componentanalysisdlg.lbl.motorconf = Motor configuration:
523 componentanalysisdlg.TabStability.Col = Component
524 componentanalysisdlg.TabStability = Stability
525 componentanalysisdlg.TabStability.ttip = Stability information
526 componentanalysisdlg.dragTableModel.Col.Component = Component
527 componentanalysisdlg.dragTableModel.Col.Pressure = <html>Pressure C<sub>D</sub>
528 componentanalysisdlg.dragTableModel.Col.Base = <html>Base C<sub>D</sub>
529 componentanalysisdlg.dragTableModel.Col.friction = <html>Friction C<sub>D</sub>
530 componentanalysisdlg.dragTableModel.Col.total = <html>Total C<sub>D</sub>
531 componentanalysisdlg.dragTabchar = Drag characteristics
532 componentanalysisdlg.dragTabchar.ttip = Drag characteristics
533 componentanalysisdlg.rollTableModel.Col.component = Component
534 componentanalysisdlg.rollTableModel.Col.rollforc = Roll forcing coefficient
535 componentanalysisdlg.rollTableModel.Col.rolldamp = Roll damping coefficient
536 componentanalysisdlg.rollTableModel.Col.total = <html>Total C<sub>l</sub>
537 componentanalysisdlg.rollTableModel = Roll dynamics
538 componentanalysisdlg.rollTableModel.ttip = Roll dynamics
539 componentanalysisdlg.println.closingmethod = Closing method called:
540 componentanalysisdlg.println.settingnam = SETTING NAN VALUES
541 componentanalysisdlg.lbl.reflenght = Reference length:
542 componentanalysisdlg.lbl.refarea = Reference area:
543 !componentanalysisdlg.But.close =Close
544 componentanalysisdlg.TabStability.Col.Component = Component
546 ! Custom Material dialog
547 custmatdlg.title.Custommaterial = Custom material
548 custmatdlg.lbl.Materialname = Material name:
549 custmatdlg.lbl.Materialtype = Material type:
550 custmatdlg.lbl.Materialdensity = Material density:
551 custmatdlg.checkbox.Addmaterial = Add material to database
554 ! Ring Component Config
555 ringcompcfg.OuterRadius = OuterRadius
556 ringcompcfg.Automatic = Automatic
557 ringcompcfg.InnerRadius = InnerRadius
558 ringcompcfg.Thickness = Thickness
559 ringcompcfg.Length = Length
560 ringcompcfg.Positionrelativeto = Position relative to:
561 ringcompcfg.plus = plus
562 ringcompcfg.PositionValue = PositionValue
563 ringcompcfg.Radialdistance = Radial distance:
564 ringcompcfg.Distancefrom = Distance from the rocket centerline
565 ringcompcfg.Radialdirection = Radial direction:
566 ringcompcfg.radialdirectionfrom = The radial direction from the rocket centerline
567 ringcompcfg.but.Reset = Reset
568 ringcompcfg.but.Resetcomponant = Reset the component to the rocket centerline
569 ringcompcfg.EngineBlock.desc = <html>An <b>engine block</b> stops the motor from moving forwards in the motor mount tube.<br><br>In order to add a motor, create a <b>body tube</b> or <b>inner tube</b> and mark it as a motor mount in the <em>Motor</em> tab.
570 ringcompcfg.note.desc = Note: An inner tube will not affect the aerodynamics of the rocket even if it is located outside of the body tube.
574 BodyTubecfg.lbl.Bodytubelength = Body tube length:
575 BodyTubecfg.lbl.Outerdiameter = Outer diameter:
576 BodyTubecfg.lbl.Innerdiameter = Inner diameter:
577 BodyTubecfg.lbl.Wallthickness = Wall thickness:
578 BodyTubecfg.tab.General = General
579 BodyTubecfg.tab.Generalproperties = General properties
580 BodyTubecfg.tab.Motor = Motor
581 BodyTubecfg.tab.Motormountconf = Motor mount configuration
582 BodyTubecfg.checkbox.Automatic = Automatic
583 BodyTubecfg.checkbox.Filled = Filled
586 FinSetConfig.tab.Fintabs = Fin tabs
587 FinSetConfig.tab.Through-the-wall = Through-the-wall fin tabs
588 FinSetConfig.but.Converttofreeform = Convert to freeform
589 FinSetConfig.but.Converttofreeform.ttip = Convert this fin set into a freeform fin set
590 FinSetConfig.Convertfinset = Convert fin set
591 FinSetConfig.but.Splitfins = Split fins
592 FinSetConfig.but.Splitfins.ttip = Split the fin set into separate fins
593 FinSetConfig.but.AutoCalc = Calculate automatically
594 FinSetConfig.lbl.Through-the-wall = Through-the-wall fin tabs:
595 FinSetConfig.lbl.Tablength = Tab length:
596 FinSetConfig.ttip.Tablength = The length of the fin tab.
597 FinSetConfig.lbl.Tabheight = Tab height:
598 FinSetConfig.ttip.Tabheight = The spanwise height of the fin tab.
599 FinSetConfig.lbl.Tabposition = Tab position:
600 FinSetConfig.ttip.Tabposition = The position of the fin tab.
601 FinSetConfig.lbl.relativeto = relative to
604 FinMarkingGuide.lbl.Front = Front
606 ! MotorDatabaseLoadingDialog
607 MotorDbLoadDlg.title = Loading motors
608 MotorDbLoadDlg.Loadingmotors = Loading motors...
611 RocketCfg.lbl.Designname = Design name:
612 RocketCfg.lbl.Designer = Designer:
613 RocketCfg.lbl.Comments = Comments:
614 RocketCfg.lbl.Revisionhistory = Revision history:
615 RocketCfg.lbl.Material = Material:
618 ShockCordCfg.lbl.Shockcordlength = Shock cord length:
620 ! RocketComponentConfig
621 RocketCompCfg.lbl.Componentname = Component name:
622 RocketCompCfg.ttip.Thecomponentname = The component name.
623 RocketCompCfg.tab.Override = Override
624 RocketCompCfg.tab.MassandCGoverride = Mass and CG override options
625 RocketCompCfg.tab.Figure = Figure
626 RocketCompCfg.tab.Figstyleopt = Figure style options
627 RocketCompCfg.tab.Comment = Comment
628 RocketCompCfg.tab.Specifyacomment = Specify a comment for the component
629 RocketCompCfg.lbl.Mass = Mass:
630 RocketCompCfg.lbl.Componentmass = Component mass:
631 RocketCompCfg.lbl.overriddento = (overridden to
632 RocketCompCfg.lbl.overriddenby = (overridden by
633 RocketCompCfg.lbl.Componentmaterial = Component material:
634 RocketCompCfg.lbl.Componentfinish = Component finish:
635 RocketCompCfg.lbl.ttip.componentmaterialaffects = The component material affects the weight of the component.
636 RocketCompCfg.combo.ttip.componentmaterialaffects = The component material affects the weight of the component.
637 RocketCompCfg.lbl.longA1 = <html>The component finish affects the aerodynamic drag of the component.<br>
638 RocketCompCfg.lbl.longA2 = The value indicated is the average roughness height of the surface.
639 RocketCompCfg.but.Setforall = Set for all
640 RocketCompCfg.but.ttip.Setforall = Set this finish for all components of the rocket.
641 RocketCompCfg.lbl.Overridemassorcenter = Override the mass or center of gravity of the
642 RocketCompCfg.checkbox.Overridemass = Override mass:
643 RocketCompCfg.checkbox.Overridecenterofgrav = Override center of gravity:
644 RocketCompCfg.checkbox.OverridemassandCG = Override mass and CG of all subcomponents
645 RocketCompCfg.lbl.longB1 = <html>The overridden mass does not include motors.<br>
646 RocketCompCfg.lbl.longB2 = The center of gravity is measured from the front end of the
647 RocketCompCfg.lbl.Commentsonthe = Comments on the
648 RocketCompCfg.lbl.Figurestyle = Figure style:
649 RocketCompCfg.lbl.Componentcolor = Component color:
650 RocketCompCfg.lbl.Choosecolor = Choose color
651 RocketCompCfg.checkbox.Usedefaultcolor = Use default color
652 RocketCompCfg.lbl.Complinestyle = Component line style:
653 RocketCompCfg.but.Saveasdefstyle = Save as default style
654 RocketCompCfg.lbl.Diameter = Diameter:
655 RocketCompCfg.lbl.Length = Length:
656 RocketCompCfg.lbl.Thickness = Thickness:
657 RocketCompCfg.checkbox.Endcapped = End capped
658 RocketCompCfg.ttip.Endcapped = Whether the end of the shoulder is capped.
659 RocketCompCfg.title.Noseconeshoulder = Nose cone shoulder
660 RocketCompCfg.title.Aftshoulder = Aft shoulder
661 RocketCompCfg.border.Foreshoulder = Fore shoulder
662 !RocketCompCfg.lbl.Length = Length:
665 BulkheadCfg.tab.Diameter = Diameter:
666 BulkheadCfg.tab.Thickness = Thickness:
667 BulkheadCfg.tab.General = General
668 BulkheadCfg.tab.Generalproperties = General properties
671 CenteringRingCfg.tab.Outerdiam = Outer diameter:
672 CenteringRingCfg.tab.Innerdiam = Inner diameter:
673 CenteringRingCfg.tab.Thickness = Thickness:
674 CenteringRingCfg.tab.General = General
675 CenteringRingCfg.tab.Generalproperties = General properties
677 !ComponentConfigDialog
678 ComponentCfgDlg.configuration = configuration
679 ComponentCfgDlg.configuration1 =
680 ComponentCfgDlg.Modify = Modify
683 StageConfig.tab.Separation = Separation
684 StageConfig.tab.Separation.ttip = Stage separation options
685 StageConfig.separation.lbl.title = Select when this stage separates:
686 StageConfig.separation.lbl.plus = plus
687 StageConfig.separation.lbl.seconds = seconds
689 !EllipticalFinSetConfig
690 EllipticalFinSetCfg.Nbroffins = Number of fins:
691 EllipticalFinSetCfg.Rotation = Rotation:
692 EllipticalFinSetCfg.Fincant = Fin cant:
693 EllipticalFinSetCfg.Rootchord = Root chord:
694 EllipticalFinSetCfg.Height = Height:
695 EllipticalFinSetCfg.Positionrelativeto = Position relative to:
696 EllipticalFinSetCfg.plus = plus
697 EllipticalFinSetCfg.FincrossSection = Fin cross section:
698 EllipticalFinSetCfg.Thickness = Thickness:
699 EllipticalFinSetCfg.General = General
700 EllipticalFinSetCfg.Generalproperties = General properties
701 EllipticalFinSetCfg.ttip.Fincant = The angle that the fins are canted with respect to the rocket body.
703 !FreeformFinSetConfig
704 FreeformFinSetCfg.tab.General = General
705 FreeformFinSetCfg.tab.ttip.General = General properties
706 FreeformFinSetCfg.tab.Shape = Shape
707 FreeformFinSetCfg.tab.ttip.Finshape = Fin shape
708 FreeformFinSetCfg.lbl.Numberoffins = Number of fins:
709 FreeformFinSetCfg.lbl.Finrotation = Fin rotation:
710 FreeformFinSetCfg.lbl.Fincant = Fin cant:
711 FreeformFinSetCfg.lbl.ttip.Fincant = The angle that the fins are canted with respect to the rocket body.
712 FreeformFinSetCfg.lbl.Posrelativeto = Position relative to:
713 FreeformFinSetCfg.lbl.plus = plus
714 FreeformFinSetCfg.lbl.FincrossSection = Fin cross section:
715 FreeformFinSetCfg.lbl.Thickness = Thickness:
716 ! doubleClick1 + 2 form the message "Double-click to edit", split approximately at the middle
717 FreeformFinSetConfig.lbl.doubleClick1 = Double-click
718 FreeformFinSetConfig.lbl.doubleClick2 = to edit
719 FreeformFinSetConfig.lbl.clickDrag = Click+drag: Add and move points
720 FreeformFinSetConfig.lbl.ctrlClick = Ctrl+click: Remove point
721 FreeformFinSetConfig.lbl.scaleFin = Scale Fin
725 InnerTubeCfg.tab.Motor = Motor
726 InnerTubeCfg.tab.ttip.Motor = Motor mount configuration
727 InnerTubeCfg.tab.Cluster = Cluster
728 InnerTubeCfg.tab.ttip.Cluster = Cluster configuration
729 InnerTubeCfg.tab.Radialpos = Radial position
730 InnerTubeCfg.tab.ttip.Radialpos = Radial position
731 InnerTubeCfg.lbl.Selectclustercfg = Select cluster configuration:
732 InnerTubeCfg.lbl.TubeSep = Tube separation:
733 InnerTubeCfg.lbl.ttip.TubeSep = The separation of the tubes, 1.0 = touching each other
734 InnerTubeCfg.lbl.Rotation = Rotation:
735 InnerTubeCfg.lbl.ttip.Rotation = Rotation angle of the cluster configuration
736 InnerTubeCfg.lbl.Rotangle = Rotation angle of the cluster configuration
737 InnerTubeCfg.but.Splitcluster = Split cluster
738 InnerTubeCfg.lbl.longA1 = <html>Split the cluster into separate components.<br>
739 InnerTubeCfg.lbl.longA2 = This also duplicates all components attached to this inner tube.
740 InnerTubeCfg.but.Resetsettings = Reset settings
741 InnerTubeCfg.but.ttip.Resetsettings = Reset the separation and rotation to the default values
744 LaunchLugCfg.lbl.Length = Length:
745 LaunchLugCfg.lbl.Outerdiam = Outer diameter:
746 LaunchLugCfg.lbl.Innerdiam = Inner diameter:
747 LaunchLugCfg.lbl.Thickness = Thickness:
748 LaunchLugCfg.lbl.Radialpos = Radial position:
749 LaunchLugCfg.lbl.Posrelativeto = Position relative to:
750 LaunchLugCfg.lbl.plus = plus
751 LaunchLugCfg.tab.General = General
752 LaunchLugCfg.tab.Generalprop = General properties
754 ! MassComponentConfig
755 MassComponentCfg.lbl.Mass = Mass:
756 MassComponentCfg.lbl.Length = Length:
757 MassComponentCfg.lbl.Diameter = Diameter:
758 MassComponentCfg.lbl.PosRelativeto = Position relative to:
759 MassComponentCfg.lbl.plus = plus
760 MassComponentCfg.tab.General = General
761 MassComponentCfg.tab.ttip.General = General properties
762 MassComponentCfg.tab.Radialpos = Radial position
763 MassComponentCfg.tab.ttip.Radialpos = Radial position configuration
764 MassComponentCfg.lbl.Radialdistance = Radial distance:
765 MassComponentCfg.lbl.Radialdirection = Radial direction:
766 MassComponentCfg.but.Reset = Reset
769 MotorCfg.checkbox.compmotormount = This component is a motor mount
770 MotorCfg.lbl.Motorcfg = Motor configuration:
771 MotorCfg.but.New = New
772 MotorCfg.lbl.Currentmotor = Current motor:
773 MotorCfg.lbl.Motoroverhang = Motor overhang:
774 MotorCfg.lbl.Ignitionat = Ignition at:
775 MotorCfg.lbl.plus = plus
776 MotorCfg.lbl.seconds = seconds
777 MotorCfg.lbl.longA1 = The current design has only one stage.
778 MotorCfg.lbl.longA2 = Stages can be added by clicking \"New stage\".
779 MotorCfg.lbl.longB1 = The current design has
780 MotorCfg.lbl.longB2 = stages.
781 MotorCfg.but.Selectmotor = Select motor
782 MotorCfg.but.Removemotor = Remove motor
783 MotorCfg.lbl.motorLabel = None
786 NoseConeCfg.lbl.Noseconeshape = Nose cone shape:
787 NoseConeCfg.lbl.Shapeparam = Shape parameter:
788 NoseConeCfg.lbl.Noseconelength = Nose cone length:
789 NoseConeCfg.lbl.Basediam = Base diameter:
790 NoseConeCfg.checkbox.Automatic = Automatic
791 NoseConeCfg.lbl.Wallthickness = Wall thickness:
792 NoseConeCfg.checkbox.Filled = Filled
793 NoseConeCfg.tab.General = General
794 NoseConeCfg.tab.ttip.General = General properties
795 NoseConeCfg.tab.Shoulder = Shoulder
796 NoseConeCfg.tab.ttip.Shoulder = Shoulder properties
799 ParachuteCfg.lbl.Canopy = Canopy:
800 ParachuteCfg.lbl.Diameter = Diameter:
801 ParachuteCfg.lbl.Material = Material:
802 ParachuteCfg.combo.MaterialModel = The component material affects the weight of the component.
803 ParachuteCfg.lbl.longA1 = <html>Drag coefficient C<sub>D</sub>:
804 ParachuteCfg.lbl.longB1 = <html>The drag coefficient relative to the total area of the parachute.<br>
805 ParachuteCfg.lbl.longB2 = A larger drag coefficient yields a slowed descent rate.
806 ParachuteCfg.lbl.longB3 = A typical value for parachutes is 0.8.
807 ParachuteCfg.but.Reset = Reset
808 ParachuteCfg.lbl.Shroudlines = Shroud lines:
809 ParachuteCfg.lbl.Numberoflines = Number of lines:
810 ParachuteCfg.lbl.Linelength = Line length:
811 ParachuteCfg.lbl.Material = Material:
812 ParachuteCfg.lbl.Posrelativeto = Position relative to:
813 ParachuteCfg.lbl.plus = plus
814 ParachuteCfg.lbl.Packedlength = Packed length:
815 ParachuteCfg.lbl.Packeddiam = Packed diameter:
816 ParachuteCfg.lbl.Deploysat = Deploys at:
817 ParachuteCfg.lbl.seconds = seconds
818 ParachuteCfg.lbl.Altitude = Altitude:
819 ParachuteCfg.tab.General = General
820 ParachuteCfg.tab.ttip.General = General properties
821 ParachuteCfg.tab.Radialpos = Radial position
822 ParachuteCfg.tab.ttip.Radialpos = Radial position configuration
823 ParachuteCfg.lbl.Radialdistance = Radial distance:
824 ParachuteCfg.lbl.Radialdirection = Radial direction:
825 ParachuteCfg.but.Reset = Reset
826 ParachuteCfg.lbl.plusdelay = plus
829 ShockCordCfg.lbl.Shockcordlength = Shock cord length:
830 ShockCordCfg.lbl.Shockcordmaterial = Shock cord material:
831 ShockCordCfg.lbl.Posrelativeto = Position relative to:
832 ShockCordCfg.lbl.plus = plus
833 ShockCordCfg.lbl.Packedlength = Packed length:
834 ShockCordCfg.lbl.Packeddiam = Packed diameter:
835 ShockCordCfg.tab.General = General
836 ShockCordCfg.tab.ttip.General = General properties
839 SleeveCfg.tab.Outerdiam = Outer diameter:
840 SleeveCfg.tab.Innerdiam = Inner diameter:
841 SleeveCfg.tab.Wallthickness = Wall thickness:
842 SleeveCfg.tab.Length = Length:
843 SleeveCfg.tab.General = General
844 SleeveCfg.tab.Generalproperties = General properties
847 StreamerCfg.lbl.Striplength = Strip length:
848 StreamerCfg.lbl.Stripwidth = Strip width:
849 StreamerCfg.lbl.Striparea = Strip area:
850 StreamerCfg.lbl.Aspectratio = Aspect ratio:
851 StreamerCfg.lbl.Material = Material:
852 StreamerCfg.combo.ttip.MaterialModel = The component material affects the weight of the component.
853 StreamerCfg.lbl.longA1 = <html>Drag coefficient C<sub>D</sub>:
854 StreamerCfg.lbl.longB1 = <html>The drag coefficient relative to the total area of the streamer.<br>
855 StreamerCfg.lbl.longB2 = A larger drag coefficient yields a slowed descent rate.
856 StreamerCfg.lbl.Automatic = Automatic
857 StreamerCfg.lbl.longC1 = The drag coefficient is relative to the area of the streamer.
858 StreamerCfg.lbl.Posrelativeto = Position relative to:
859 StreamerCfg.lbl.plus = plus
860 StreamerCfg.lbl.Packedlength = Packed length:
861 StreamerCfg.lbl.Packeddiam = Packed diameter:
862 StreamerCfg.lbl.Deploysat = Deploys at:
863 StreamerCfg.lbl.seconds = seconds
864 StreamerCfg.lbl.Altitude = Altitude:
865 StreamerCfg.tab.General = General
866 StreamerCfg.tab.ttip.General = General properties
867 StreamerCfg.tab.Radialpos = Radial position
868 StreamerCfg.tab.ttip.Radialpos = Radial position configuration
869 StreamerCfg.lbl.Radialdistance = Radial distance:
870 StreamerCfg.lbl.Radialdirection = Radial direction:
871 StreamerCfg.but.Reset = Reset
872 StreamerCfg.lbl.plusdelay = plus
874 ! ThicknessRingComponentConfig
875 ThicknessRingCompCfg.tab.Outerdiam = Outer diameter:
876 ThicknessRingCompCfg.tab.Innerdiam = Inner diameter:
877 ThicknessRingCompCfg.tab.Wallthickness = Wall thickness:
878 ThicknessRingCompCfg.tab.Length = Length:
879 ThicknessRingCompCfg.tab.General = General
880 ThicknessRingCompCfg.tab.Generalprop = General properties
883 TransitionCfg.lbl.Transitionshape = Transition shape:
884 TransitionCfg.checkbox.Clipped = Clipped
885 TransitionCfg.lbl.Shapeparam = Shape parameter:
886 TransitionCfg.lbl.Transitionlength = Transition length:
887 TransitionCfg.lbl.Forediam = Fore diameter:
888 TransitionCfg.checkbox.Automatic = Automatic
889 TransitionCfg.lbl.Aftdiam = Aft diameter:
890 TransitionCfg.lbl.Wallthickness = Wall thickness:
891 TransitionCfg.checkbox.Filled = Filled
892 TransitionCfg.tab.General = General
893 TransitionCfg.tab.Generalproperties = General properties
894 TransitionCfg.tab.Shoulder = Shoulder
895 TransitionCfg.tab.Shoulderproperties = Shoulder properties
897 ! TrapezoidFinSetConfig
898 TrapezoidFinSetCfg.lbl.Nbroffins = Number of fins:
899 TrapezoidFinSetCfg.lbl.ttip.Nbroffins = The number of fins in the fin set.
900 TrapezoidFinSetCfg.lbl.Finrotation = Fin rotation:
901 TrapezoidFinSetCfg.lbl.ttip.Finrotation = The angle of the first fin in the fin set.
902 TrapezoidFinSetCfg.lbl.Fincant = Fin cant:
903 TrapezoidFinSetCfg.lbl.ttip.Fincant =The angle that the fins are canted with respect to the rocket body.
904 TrapezoidFinSetCfg.lbl.Rootchord = Root chord:
905 TrapezoidFinSetCfg.lbl.Tipchord = Tip chord:
906 TrapezoidFinSetCfg.lbl.Height = Height:
907 TrapezoidFinSetCfg.lbl.Sweeplength = Sweep length:
908 TrapezoidFinSetCfg.lbl.Sweepangle = Sweep angle:
909 TrapezoidFinSetCfg.lbl.FincrossSection = Fin cross section:
910 TrapezoidFinSetCfg.lbl.Thickness = Thickness:
911 TrapezoidFinSetCfg.lbl.Posrelativeto = Position relative to:
912 TrapezoidFinSetCfg.lbl.plus = plus
913 TrapezoidFinSetCfg.tab.General = General
914 TrapezoidFinSetCfg.tab.Generalproperties = General properties
916 !MotorConfigurationModel
917 MotorCfgModel.Editcfg = Edit configurations
919 ! StorageOptionChooser
920 StorageOptChooser.lbl.Simdatatostore = Simulated data to store:
921 StorageOptChooser.rdbut.Allsimdata = All simulated data
922 StorageOptChooser.lbl.longA1 = <html>Store all simulated data.<br>
923 StorageOptChooser.lbl.longA2 = This can result in very large files!
924 StorageOptChooser.rdbut.Every = Every
925 StorageOptChooser.lbl.longB1 = <html>Store plottable values approximately this far apart.<br>
926 StorageOptChooser.lbl.longB2 = Larger values result in smaller files.
927 StorageOptChooser.lbl.seconds = seconds
928 StorageOptChooser.rdbut.Onlyprimfig = Only primary figures
929 StorageOptChooser.lbl.longC1 = <html>Store only the values shown in the summary table.<br>
930 StorageOptChooser.lbl.longC2 = This results in the smallest files.
931 StorageOptChooser.checkbox.Compfile = Compress file
932 StorageOptChooser.lbl.UsingComp = Using compression reduces the file size significantly.
933 StorageOptChooser.lbl.longD1 = An estimate on how large the resulting file would be with the present options.
934 StorageOptChooser.ttip.Saveopt = Save options
935 StorageOptChooser.lbl.Estfilesize = Estimated file size:
936 StorageOptChooser.lbl.Saveopt = Save options
938 ! ThrustCurveMotorSelectionPanel
939 TCMotorSelPan.lbl.Selrocketmotor = Select rocket motor:
940 TCMotorSelPan.checkbox.hideSimilar = Hide very similar thrust curves
941 TCMotorSelPan.SHOW_DESCRIPTIONS.desc1 = Show all motors
942 TCMotorSelPan.SHOW_DESCRIPTIONS.desc2 = Show motors with diameter less than that of the motor mount
943 TCMotorSelPan.SHOW_DESCRIPTIONS.desc3 = Show motors with diameter equal to that of the motor mount
944 TCMotorSelPan.lbl.Motormountdia = Motor mount diameter:
945 TCMotorSelPan.lbl.Search = Search:
946 TCMotorSelPan.lbl.Selectthrustcurve = Select thrust curve:
947 TCMotorSelPan.lbl.Ejectionchargedelay = Ejection charge delay:
948 TCMotorSelPan.equalsIgnoreCase.None = None
949 TCMotorSelPan.lbl.NumberofsecondsorNone = (Number of seconds or \"None\")
950 TCMotorSelPan.lbl.Totalimpulse = Total impulse:
951 TCMotorSelPan.lbl.Avgthrust = Avg. thrust:
952 TCMotorSelPan.lbl.Maxthrust = Max. thrust:
953 TCMotorSelPan.lbl.Burntime = Burn time:
954 TCMotorSelPan.lbl.Launchmass = Launch mass:
955 TCMotorSelPan.lbl.Emptymass = Empty mass:
956 TCMotorSelPan.lbl.Datapoints = Data points:
957 TCMotorSelPan.lbl.Digest = Digest:
958 TCMotorSelPan.title.Thrustcurve = Thrust curve:
959 TCMotorSelPan.title.Thrust = Thrust
960 TCMotorSelPan.delayBox.None = None
964 PlotDialog.title.Flightdataplot = Flight data plot
965 PlotDialog.Chart.Simulatedflight = Simulated flight
966 PlotDialog.CheckBox.Showdatapoints = Show data points
967 PlotDialog.lbl.Chart = Click and drag down+right to zoom in, up+left to zoom out
970 ! "main" prefix is used for the main application dialog
972 # FIXME: Rename the description keys
974 main.menu.file = File
975 main.menu.file.desc = File-handling related tasks
976 main.menu.file.new = New
977 main.menu.file.new.desc = Create a new rocket design
978 main.menu.file.open = Open...
979 BasicFrame.item.Openrocketdesign = Open a rocket design
980 main.menu.file.openExample = Open example...
981 BasicFrame.item.Openexamplerocketdesign = Open an example rocket design
982 main.menu.file.save = Save
983 BasicFrame.item.SavecurRocketdesign = Save the current rocket design
984 main.menu.file.saveAs = Save as...
985 BasicFrame.item.SavecurRocketdesnewfile = Save the current rocket design to a new file
986 main.menu.file.print = Print / Export PDF...
987 main.menu.file.print.desc = Print or save as PDF the parts list and fin templates
988 main.menu.file.close = Close
989 BasicFrame.item.Closedesign = Close the current rocket design
990 main.menu.file.quit = Quit
991 BasicFrame.item.Quitprogram = Quit the program
993 main.menu.edit = Edit
994 BasicFrame.menu.Rocketedt = Rocket editing
995 main.menu.edit.undo = Undo
996 main.menu.edit.undo.desc = Undo the previous operation
997 main.menu.edit.redo = Redo
998 main.menu.edit.redo.desc = Redo the previously undone operation
999 main.menu.edit.cut = Cut
1000 main.menu.edit.copy = Copy
1001 main.menu.edit.paste = Paste
1002 main.menu.edit.delete = Delete
1003 main.menu.edit.resize = Scale...
1004 main.menu.edit.resize.desc = Scale parts of the rocket design
1005 main.menu.edit.preferences = Preferences
1006 main.menu.edit.preferences.desc = Setup the application preferences
1008 main.menu.analyze = Analyze
1009 main.menu.analyze.desc = Rocket analysis
1010 main.menu.analyze.componentAnalysis = Component analysis
1011 main.menu.analyze.componentAnalysis.desc = Analyze the rocket components separately
1012 main.menu.analyze.optimization = Rocket optimization
1013 main.menu.analyze.optimization.desc = General rocket design optimization
1015 main.menu.help = Help
1016 main.menu.help.desc = Information about OpenRocket
1017 main.menu.help.tours = Guided tours
1018 main.menu.help.tours.desc = Take guided tours on OpenRocket
1019 main.menu.help.license = License
1020 main.menu.help.license.desc = OpenRocket license information
1021 main.menu.help.bugReport = Bug report
1022 main.menu.help.bugReport.desc = Information about reporting bugs in OpenRocket
1023 main.menu.help.debugLog = Debug log
1024 main.menu.help.debugLog.desc = View the OpenRocket debug log
1025 main.menu.help.about = About
1026 main.menu.help.about.desc = Copyright details about OpenRocket
1028 main.menu.debug = Debug
1029 main.menu.debug.whatisthismenu = What is this menu?
1030 main.menu.debug.createtestrocket = Create test rocket
1033 ! Translate here all material database
1038 Databases.materials.Acrylic = Acrylic
1039 Databases.materials.Aluminum = Aluminum
1040 Databases.materials.Balsa = Balsa
1041 Databases.materials.Basswood = Basswood
1042 Databases.materials.Birch = Birch
1043 Databases.materials.Brass = Brass
1044 Databases.materials.Cardboard = Cardboard
1045 Databases.materials.Carbonfiber = Carbon fiber
1046 Databases.materials.Cork = Cork
1047 Databases.materials.DepronXPS = Depron (XPS)
1048 Databases.materials.Fiberglass = Fiberglass
1049 Databases.materials.Kraftphenolic = Kraft phenolic
1050 Databases.materials.Maple = Maple
1051 Databases.materials.Paperoffice = Paper (office)
1052 Databases.materials.Pine = Pine
1053 Databases.materials.Plywoodbirch = Plywood (birch)
1054 Databases.materials.PolycarbonateLexan = Polycarbonate (Lexan)
1055 Databases.materials.Polystyrene = Polystyrene
1056 Databases.materials.PVC = PVC
1057 Databases.materials.Spruce = Spruce
1058 Databases.materials.Steel = Steel
1059 Databases.materials.StyrofoamgenericEPS = Styrofoam (generic EPS)
1060 Databases.materials.StyrofoamBluefoamXPS = Styrofoam \"Blue foam\" (XPS)
1061 Databases.materials.Titanium = Titanium
1062 Databases.materials.Quantumtubing = Quantum tubing
1063 Databases.materials.BlueTube = Blue tube
1065 Databases.materials.Ripstopnylon = Ripstop nylon
1066 Databases.materials.Mylar = Mylar
1067 Databases.materials.Polyethylenethin = Polyethylene (thin)
1068 Databases.materials.Polyethyleneheavy = Polyethylene (heavy)
1069 Databases.materials.Silk = Silk
1070 Databases.materials.Paperoffice = Paper (office)
1071 Databases.materials.Cellophane = Cellophane
1072 Databases.materials.Crepepaper = Cr\u00eape paper
1074 Databases.materials.Threadheavy-duty = Thread (heavy-duty)
1075 Databases.materials.Elasticcordround2mm = Elastic cord (round 2mm, 1/16 in)
1076 Databases.materials.Elasticcordflat6mm = Elastic cord (flat 6mm, 1/4 in)
1077 Databases.materials.Elasticcordflat12mm = Elastic cord (flat 12mm, 1/2 in)
1078 Databases.materials.Elasticcordflat19mm = Elastic cord (flat 19mm, 3/4 in)
1079 Databases.materials.Elasticcordflat25mm = Elastic cord (flat 25mm, 1 in)
1080 Databases.materials.Braidednylon2mm = Braided nylon (2 mm, 1/16 in)
1081 Databases.materials.Braidednylon3mm = Braided nylon (3 mm, 1/8 in)
1082 Databases.materials.Tubularnylon11mm = Tubular nylon (11 mm, 7/16 in)
1083 Databases.materials.Tubularnylon14mm = Tubular nylon (14 mm, 9/16 in)
1084 Databases.materials.Tubularnylon25mm = Tubular nylon (25 mm, 1 in)
1087 ExternalComponent.Rough = Rough
1088 ExternalComponent.Unfinished = Unfinished
1089 ExternalComponent.Regularpaint = Regular paint
1090 ExternalComponent.Smoothpaint = Smooth paint
1091 ExternalComponent.Polished = Polished
1094 LineStyle.Solid = Solid
1095 LineStyle.Dashed = Dashed
1096 LineStyle.Dotted = Dotted
1097 LineStyle.Dash-dotted = Dash-dotted
1098 LineStyle.Defaultstyle = Default style
1101 Shape.Conical = Conical
1102 Shape.Conical.desc1 = A conical nose cone has a profile of a triangle.
1103 Shape.Conical.desc2 = A conical transition has straight sides.
1105 Shape.Ogive.desc1 = An ogive nose cone has a profile that is a segment of a circle. The shape parameter value 1 produces a <b>tangent ogive</b>, which has a smooth transition to the body tube, values less than 1 produce <b>secant ogives</b>.
1106 Shape.Ogive.desc2 = An ogive transition has a profile that is a segment of a circle. The shape parameter value 1 produces a <b>tangent ogive</b>, which has a smooth transition to the body tube at the aft end, values less than 1 produce <b>secant ogives</b>.
1107 Shape.Ellipsoid = Ellipsoid
1108 Shape.Ellipsoid.desc1 = An ellipsoidal nose cone has a profile of a half-ellipse with major axes of lengths 2×<i>Length</i> and <i>Diameter</i>.
1109 Shape.Ellipsoid.desc2 = An ellipsoidal transition has a profile of a half-ellipse with major axes of lengths 2×<i>Length</i> and <i>Diameter</i>. If the transition is not clipped, then the profile is extended at the center by the corresponding radius.
1110 Shape.Powerseries = Power series
1111 Shape.Powerseries.desc1 = A power series nose cone has a profile of <i>Radius</i> × (<i>x</i> / <i>Length</i>)<sup><i>k</i></sup> where <i>k</i> is the shape parameter. For <i>k</i>=0.5 this is a <b>\u00BD-power</b> or <b>parabolic</b> nose cone, for <i>k</i>=0.75 a <b>\u00BE-power</b>, and for <i>k</i>=1 a <b>conical</b> nose cone.
1112 Shape.Powerseries.desc2 = A power series transition has a profile of <i>Radius</i> × (<i>x</i> / <i>Length</i>)<sup><i>k</i></sup> where <i>k</i> is the shape parameter. For <i>k</i>=0.5 the transition is <b>\u00BD-power</b> or <b>parabolic</b>, for <i>k</i>=0.75 a <b>\u00BE-power</b>, and for <i>k</i>=1 <b>conical</b>.
1113 Shape.Parabolicseries = Parabolic series
1114 Shape.Parabolicseries.desc1 = A parabolic series nose cone has a profile of a parabola. The shape parameter defines the segment of the parabola to utilize. The shape parameter 1.0 produces a <b>full parabola</b> which is tangent to the body tube, 0.75 produces a <b>3/4 parabola</b>, 0.5 procudes a <b>1/2 parabola</b> and 0 produces a <b>conical</b> nose cone.
1115 Shape.Parabolicseries.desc2 = A parabolic series transition has a profile of a parabola. The shape parameter defines the segment of the parabola to utilize. The shape parameter 1.0 produces a <b>full parabola</b> which is tangent to the body tube at the aft end, 0.75 produces a <b>3/4 parabola</b>, 0.5 procudes a <b>1/2 parabola</b> and 0 produces a <b>conical</b> transition.
1116 Shape.Haackseries = Haack series
1117 Shape.Haackseries.desc1 = The Haack series nose cones are designed to minimize drag. The shape parameter 0 produces an <b>LD-Haack</b> or <b>Von Karman</b> nose cone, which minimizes drag for fixed length and diameter, while a value of 0.333 produces an <b>LV-Haack</b> nose cone, which minimizes drag for fixed length and volume.
1118 Shape.Haackseries.desc2 = The Haack series <i>nose cones</i> are designed to minimize drag. These transition shapes are their equivalents, but do not necessarily produce optimal drag for transitions. The shape parameter 0 produces an <b>LD-Haack</b> or <b>Von Karman</b> shape, while a value of 0.333 produces an <b>LV-Haack</b> shape.
1122 RocketComponent.Position.TOP = Top of the parent component
1123 RocketComponent.Position.MIDDLE = Middle of the parent component
1124 RocketComponent.Position.BOTTOM = Bottom of the parent component
1125 RocketComponent.Position.AFTER = After the parent component
1126 RocketComponent.Position.ABSOLUTE = Tip of the nose cone
1129 LaunchLug.Launchlug = Launch lug
1131 NoseCone.NoseCone = Nose cone
1133 Transition.Transition = Transition
1137 Stage.SeparationEvent.UPPER_IGNITION = Upper stage motor ignition
1138 Stage.SeparationEvent.IGNITION = Current stage motor ignition
1139 Stage.SeparationEvent.BURNOUT = Current stage motor burnout
1140 Stage.SeparationEvent.EJECTION = Current stage ejection charge
1141 Stage.SeparationEvent.LAUNCH = Launch
1142 Stage.SeparationEvent.NEVER = Never
1145 BodyTube.BodyTube = Body tube
1147 TubeCoupler.TubeCoupler = Tube coupler
1149 InnerTube.InnerTube = Inner Tube
1151 TrapezoidFinSet.TrapezoidFinSet = Trapezoidal fin set
1153 FreeformFinSet.FreeformFinSet = Freeform fin set
1155 MassComponent.MassComponent = Mass component
1157 Parachute.Parachute = Parachute
1159 ShockCord.ShockCord = Shock cord
1161 Bulkhead.Bulkhead = Bulkhead
1164 Rocket.motorCount.Nomotor = [No motors]
1165 Rocket.compname.Rocket = Rocket
1168 MotorMount.IgnitionEvent.AUTOMATIC = Automatic (launch or ejection charge)
1169 MotorMount.IgnitionEvent.LAUNCH = Launch
1170 MotorMount.IgnitionEvent.EJECTION_CHARGE = First ejection charge of previous stage
1171 MotorMount.IgnitionEvent.BURNOUT = First burnout of previous stage
1172 MotorMount.IgnitionEvent.NEVER = Never
1175 ComponentIcons.Nosecone = Nose cone
1176 ComponentIcons.Bodytube = Body tube
1177 ComponentIcons.Transition = Transition
1178 ComponentIcons.Trapezoidalfinset = Trapezoidal fin set
1179 ComponentIcons.Ellipticalfinset = Elliptical fin set
1180 ComponentIcons.Freeformfinset = Freeform fin set
1181 ComponentIcons.Launchlug = Launch lug
1182 ComponentIcons.Innertube = Inner tube
1183 ComponentIcons.Tubecoupler = Tube coupler
1184 ComponentIcons.Centeringring = Centering ring
1185 ComponentIcons.Bulkhead = Bulk head
1186 ComponentIcons.Engineblock = Engine block
1187 ComponentIcons.Parachute = Parachute
1188 ComponentIcons.Streamer = Streamer
1189 ComponentIcons.Shockcord = Shock cord
1190 ComponentIcons.Masscomponent = Mass component
1191 ComponentIcons.disabled = (disabled)
1194 StageAction.Stage = Stage
1197 RecoveryDevice.DeployEvent.LAUNCH = Launch (plus NN seconds)
1198 RecoveryDevice.DeployEvent.EJECTION = First ejection charge of this stage
1199 RecoveryDevice.DeployEvent.APOGEE = Apogee
1200 RecoveryDevice.DeployEvent.ALTITUDE = Specific altitude during descent
1201 RecoveryDevice.DeployEvent.NEVER = Never
1204 FlightEvent.Type.LAUNCH = Launch
1205 FlightEvent.Type.IGNITION = Motor ignition
1206 FlightEvent.Type.LIFTOFF = Lift-off
1207 FlightEvent.Type.LAUNCHROD = Launch rod clearance
1208 FlightEvent.Type.BURNOUT = Motor burnout
1209 FlightEvent.Type.EJECTION_CHARGE = Ejection charge
1210 FlightEvent.Type.STAGE_SEPARATION = Stage separation
1211 FlightEvent.Type.APOGEE = Apogee
1212 FlightEvent.Type.RECOVERY_DEVICE_DEPLOYMENT = Recovery device deployment
1213 FlightEvent.Type.GROUND_HIT = Ground hit
1214 FlightEvent.Type.SIMULATION_END = Simulation end
1215 FlightEvent.Type.ALTITUDE = Altitude change
1217 ! ThrustCurveMotorColumns
1218 TCurveMotorCol.MANUFACTURER = Manufacturer
1219 TCurveMotorCol.DESIGNATION = Designation
1220 TCurveMotorCol.TYPE = Type
1221 TCurveMotorCol.DIAMETER = Diameter
1222 TCurveMotorCol.LENGTH = Length
1225 RocketInfo.lengthLine.Length = Length
1226 RocketInfo.lengthLine.maxdiameter = , max. diameter
1227 RocketInfo.massText1 = Mass with motors
1228 RocketInfo.massText2 = Mass with no motors
1229 RocketInfo.at = at M=
1230 RocketInfo.cgText = CG:
1231 RocketInfo.cpText = CP:
1232 RocketInfo.stabText = Stability:
1233 RocketInfo.Warning = Warning:
1234 RocketInfo.Calculating = Calculating...
1235 RocketInfo.Apogee = Apogee:
1236 RocketInfo.Maxvelocity = Max. velocity:
1237 RocketInfo.Maxacceleration = Max. acceleration:
1238 RocketInfo.apogeeValue = N/A
1239 RocketInfo.Mach = (Mach
1240 RocketInfo.velocityValue = N/A
1241 RocketInfo.accelerationValue = N/A
1244 FinSet.CrossSection.SQUARE = Square
1245 FinSet.CrossSection.ROUNDED = Rounded
1246 FinSet.CrossSection.AIRFOIL = Airfoil
1247 FinSet.TabRelativePosition.FRONT = Root chord leading edge
1248 FinSet.TabRelativePosition.CENTER = Root chord midpoint
1249 FinSet.TabRelativePosition.END = Root chord trailing edge
1252 FlightDataType.TYPE_TIME = Time
1253 FlightDataType.TYPE_ALTITUDE = Altitude
1254 FlightDataType.TYPE_VELOCITY_Z = Vertical velocity
1255 FlightDataType.TYPE_ACCELERATION_Z = Vertical acceleration
1256 FlightDataType.TYPE_VELOCITY_TOTAL = Total velocity
1257 FlightDataType.TYPE_ACCELERATION_TOTAL = Total acceleration
1258 FlightDataType.TYPE_POSITION_X = Position upwind
1259 FlightDataType.TYPE_POSITION_Y = Position parallel to wind
1260 FlightDataType.TYPE_POSITION_XY = Lateral distance
1261 FlightDataType.TYPE_POSITION_DIRECTION = Lateral direction
1262 FlightDataType.TYPE_VELOCITY_XY = Lateral velocity
1263 FlightDataType.TYPE_ACCELERATION_XY = Lateral acceleration
1264 FlightDataType.TYPE_AOA = Angle of attack
1265 FlightDataType.TYPE_ROLL_RATE = Roll rate
1266 FlightDataType.TYPE_PITCH_RATE = Pitch rate
1267 FlightDataType.TYPE_YAW_RATE = Yaw rate
1268 FlightDataType.TYPE_MASS = Mass
1269 FlightDataType.TYPE_LONGITUDINAL_INERTIA = Longitudinal moment of inertia
1270 FlightDataType.TYPE_ROTATIONAL_INERTIA = Rotational moment of inertia
1271 FlightDataType.TYPE_CP_LOCATION = CP location
1272 FlightDataType.TYPE_CG_LOCATION = CG location
1273 FlightDataType.TYPE_STABILITY = Stability margin calibers
1274 FlightDataType.TYPE_MACH_NUMBER = Mach number
1275 FlightDataType.TYPE_REYNOLDS_NUMBER = Reynolds number
1276 FlightDataType.TYPE_THRUST_FORCE = Thrust
1277 FlightDataType.TYPE_DRAG_FORCE = Drag force
1278 FlightDataType.TYPE_DRAG_COEFF = Drag coefficient
1279 FlightDataType.TYPE_AXIAL_DRAG_COEFF = Axial drag coefficient
1280 FlightDataType.TYPE_FRICTION_DRAG_COEFF = Friction drag coefficient
1281 FlightDataType.TYPE_PRESSURE_DRAG_COEFF = Pressure drag coefficient
1282 FlightDataType.TYPE_BASE_DRAG_COEFF = Base drag coefficient
1283 FlightDataType.TYPE_NORMAL_FORCE_COEFF = Normal force coefficient
1284 FlightDataType.TYPE_PITCH_MOMENT_COEFF = Pitch moment coefficient
1285 FlightDataType.TYPE_YAW_MOMENT_COEFF = Yaw moment coefficient
1286 FlightDataType.TYPE_SIDE_FORCE_COEFF = Side force coefficient
1287 FlightDataType.TYPE_ROLL_MOMENT_COEFF = Roll moment coefficient
1288 FlightDataType.TYPE_ROLL_FORCING_COEFF = Roll forcing coefficient
1289 FlightDataType.TYPE_ROLL_DAMPING_COEFF = Roll damping coefficient
1290 FlightDataType.TYPE_PITCH_DAMPING_MOMENT_COEFF = Pitch damping coefficient
1291 FlightDataType.TYPE_YAW_DAMPING_MOMENT_COEFF = Yaw damping coefficient
1292 FlightDataType.TYPE_REFERENCE_LENGTH = Reference length
1293 FlightDataType.TYPE_REFERENCE_AREA = Reference area
1294 FlightDataType.TYPE_ORIENTATION_THETA = Vertical orientation (zenith)
1295 FlightDataType.TYPE_ORIENTATION_PHI = Lateral orientation (azimuth)
1296 FlightDataType.TYPE_WIND_VELOCITY = Wind velocity
1297 FlightDataType.TYPE_AIR_TEMPERATURE = Air temperature
1298 FlightDataType.TYPE_AIR_PRESSURE = Air pressure
1299 FlightDataType.TYPE_SPEED_OF_SOUND = Speed of sound
1300 FlightDataType.TYPE_TIME_STEP = Simulation time step
1301 FlightDataType.TYPE_COMPUTATION_TIME = Computation time
1302 FlightDataType.TYPE_LATITUDE = Latitude
1303 FlightDataType.TYPE_LONGITUDE = Longitude
1304 FlightDataType.TYPE_CORIOLIS_ACCELERATION = Coriolis acceleration
1307 PlotConfiguration.Verticalmotion = Vertical motion vs. time
1308 PlotConfiguration.Totalmotion = Total motion vs. time
1309 PlotConfiguration.Flightside = Flight side profile
1310 PlotConfiguration.Stability = Stability vs. time
1311 PlotConfiguration.Dragcoef = Drag coefficients vs. Mach number
1312 PlotConfiguration.Rollcharacteristics = Roll characteristics
1313 PlotConfiguration.Angleofattack = Angle of attack and orientation vs. time
1314 PlotConfiguration.Simulationtime = Simulation time step and computation time
1317 Warning.LargeAOA.str1 = Large angle of attack encountered.
1318 Warning.LargeAOA.str2 = Large angle of attack encountered (
1319 Warning.DISCONTINUITY = Discontinuity in rocket body diameter.
1320 Warning.THICK_FIN = Thick fins may not be modeled accurately.
1321 Warning.JAGGED_EDGED_FIN = Jagged-edged fin predictions may be inaccurate.
1322 Warning.LISTENERS_AFFECTED = Listeners modified the flight simulation
1323 Warning.RECOVERY_DEPLOYMENT_WHILE_BURNING = Recovery device opened while motor still burning.
1324 Warning.FILE_INVALID_PARAMETER = Invalid parameter encountered, ignoring.
1328 ScaleDialog.lbl.scaleRocket = Entire rocket
1329 ScaleDialog.lbl.scaleSubselection = Selection and all subcomponents
1330 ScaleDialog.lbl.scaleSelection = Only selected component
1331 ScaleDialog.title = Scale design
1332 ScaleDialog.lbl.scale = Scale:
1333 ScaleDialog.lbl.scale.ttip = Select whether to scale the entire design or only the selected component
1334 ScaleDialog.lbl.scaling = Scaling to apply:
1335 ScaleDialog.lbl.scaling.ttip = Resulting size, values above 100% grow and values below 100% shrink the design.
1336 ! The scaleFrom/scaleTo pair creates a phrase "Scale from [...] to [...]"
1337 ScaleDialog.lbl.scaleFrom = Scale from
1338 ScaleDialog.lbl.scaleTo = to
1339 ScaleDialog.lbl.scaleFromTo.ttip = Define the scaling based on an original and resulting length.
1340 ScaleDialog.checkbox.scaleMass = Update explicit mass values
1341 ScaleDialog.checkbox.scaleMass.ttip = Scale mass component and override mass values by the cube of the scaling factor
1342 ScaleDialog.button.scale = Scale
1343 ScaleDialog.undo.scaleRocket = Scale rocket
1344 ScaleDialog.undo.scaleComponent = Scale component
1345 ScaleDialog.undo.scaleComponents = Scale components
1351 OpenRocketPrintable.Partsdetail = Parts detail
1352 OpenRocketPrintable.Fintemplates = Fin templates
1353 OpenRocketPrintable.Transitiontemplates = Transition templates
1354 OpenRocketPrintable.Noseconetemplates = Nose Cone templates
1355 OpenRocketPrintable.Finmarkingguide = Fin marking guide
1356 OpenRocketPrintable.DesignReport = Design Report
1358 OpenRocketDocument.Redo = Redo
1359 OpenRocketDocument.Undo = Undo
1362 EllipticalFinSet.Ellipticalfinset = Elliptical fin set
1368 optimization.modifier.nosecone.length = Length
1369 optimization.modifier.nosecone.length.desc = Optimize the nose cone length.
1370 optimization.modifier.nosecone.diameter = Diameter
1371 optimization.modifier.nosecone.diameter.desc = Optimize the nose cone base diameter.
1372 optimization.modifier.nosecone.thickness = Thickness
1373 optimization.modifier.nosecone.thickness.desc = Optimize the nose cone wall thickness.
1374 optimization.modifier.nosecone.shapeparameter = Shape parameter
1375 optimization.modifier.nosecone.shapeparameter.desc = Optimize the nose cone shape parameter.
1377 optimization.modifier.transition.length = Length
1378 optimization.modifier.transition.length.desc = Optimize the transition length.
1379 optimization.modifier.transition.forediameter = Fore diameter
1380 optimization.modifier.transition.forediameter.desc = Optimize the transition fore diameter.
1381 optimization.modifier.transition.aftdiameter = Aft diameter
1382 optimization.modifier.transition.aftdiameter.desc = Optimize the transition aft diameter.
1383 optimization.modifier.transition.thickness = Thickness
1384 optimization.modifier.transition.thickness.desc = Optimize the transition wall thickness.
1385 optimization.modifier.transition.shapeparameter = Shape parameter
1386 optimization.modifier.transition.shapeparameter.desc = Optimize the transition shape parameter.
1388 optimization.modifier.bodytube.length = Length
1389 optimization.modifier.bodytube.length.desc = Optimize the body tube length.
1390 optimization.modifier.bodytube.outerDiameter = Outer diameter
1391 optimization.modifier.bodytube.outerDiameter.desc = Optimize the body tube outer diameter while maintaining the wall thickness.
1392 optimization.modifier.bodytube.thickness = Thickness
1393 optimization.modifier.bodytube.thickness.desc = Optimize the body tube wall thickness.
1395 optimization.modifier.trapezoidfinset.rootChord = Root chord
1396 optimization.modifier.trapezoidfinset.rootChord.desc = Optimize the root chord length of the fin set (length of fin at the rocket body).
1397 optimization.modifier.trapezoidfinset.tipChord = Tip chord
1398 optimization.modifier.trapezoidfinset.tipChord.desc = Optimize the tip chord length of the fin set (length of fin at outer edge).
1399 optimization.modifier.trapezoidfinset.sweep = Sweep
1400 optimization.modifier.trapezoidfinset.sweep.desc = Optimize the sweep of the fin set (distance that the leading edge sweeps backwards).
1401 optimization.modifier.trapezoidfinset.height = Height
1402 optimization.modifier.trapezoidfinset.height.desc = Optimize the height (semi-span) of the fin set.
1404 optimization.modifier.ellipticalfinset.length = Root chord
1405 optimization.modifier.ellipticalfinset.length.desc = Optimize the root chord length of the fin set.
1406 optimization.modifier.ellipticalfinset.height = Height
1407 optimization.modifier.ellipticalfinset.height.desc = Optimize the height (semi-span) of the fin set.
1409 optimization.modifier.finset.cant = Cant angle
1410 optimization.modifier.finset.cant.desc = Optimize the cant angle of the fin set.
1411 optimization.modifier.finset.position = Position
1412 optimization.modifier.finset.position.desc = Optimize the fin set position along the rocket body.
1414 optimization.modifier.launchlug.length = Length
1415 optimization.modifier.launchlug.length.desc = Optimize the launch lug length.
1416 optimization.modifier.launchlug.outerDiameter = Outer diameter
1417 optimization.modifier.launchlug.outerDiameter.desc = Optimize the outer diameter of the launch lug.
1418 optimization.modifier.launchlug.thickness = Thickness
1419 optimization.modifier.launchlug.thickness.desc = Optimize the launch lug thickness while keeping the outer diameter constant.
1420 optimization.modifier.launchlug.position = Position
1421 optimization.modifier.launchlug.position.desc = Optimize the launch lug position along the rocket body.
1424 optimization.modifier.internalcomponent.position = Position
1425 optimization.modifier.internalcomponent.position.desc = Optimize the position of the component relative to the parent component.
1427 optimization.modifier.masscomponent.mass = Mass
1428 optimization.modifier.masscomponent.mass.desc = Optimize the mass of the mass component.
1430 optimization.modifier.parachute.diameter = Diameter
1431 optimization.modifier.parachute.diameter.desc = Optimize the parachute canopy diameter.
1432 optimization.modifier.parachute.coefficient = Drag coefficient
1433 optimization.modifier.parachute.coefficient.desc = Optimize the drag coefficient of the parachute. Typical parachutes have a drag coefficient of about 0.8.
1435 optimization.modifier.streamer.length = Length
1436 optimization.modifier.streamer.length.desc = Optimize the length of the streamer.
1437 optimization.modifier.streamer.width = Width
1438 optimization.modifier.streamer.width.desc = Optimize the width of the streamer.
1439 optimization.modifier.streamer.aspectRatio = Aspect ratio
1440 optimization.modifier.streamer.aspectRatio.desc = Optimize the aspect ratio of the streamer (length/width). You should NOT select streamer length or width at the same time with the aspect ratio.
1441 optimization.modifier.streamer.coefficient = Drag coefficient
1442 optimization.modifier.streamer.coefficient.desc = Optimize the drag coefficient of the streamer.
1444 optimization.modifier.recoverydevice.deployDelay = Deployment delay
1445 optimization.modifier.recoverydevice.deployDelay.desc = Optimize the deployment delay of the recovery device.
1446 optimization.modifier.recoverydevice.deployAltitude = Deployment altitude
1447 optimization.modifier.recoverydevice.deployAltitude.desc = Optimize the deployment altitude of the recovery device.
1449 optimization.modifier.rocketcomponent.overrideMass = Override mass
1450 optimization.modifier.rocketcomponent.overrideMass.desc = Optimize the overridden mass of the component.
1451 optimization.modifier.rocketcomponent.overrideCG = Override CG
1452 optimization.modifier.rocketcomponent.overrideCG.desc = Optimize the overridden center of gravity of the component.
1454 optimization.modifier.motormount.overhang = Motor overhang
1455 optimization.modifier.motormount.overhang.desc = Optimize the motor overhang.
1456 optimization.modifier.motormount.delay = Motor ignition delay
1457 optimization.modifier.motormount.delay.desc = Optimize the motor ignition delay.
1462 ! General rocket design optimization dialog
1464 GeneralOptimizationDialog.title = Rocket optimization
1465 GeneralOptimizationDialog.goal.maximize = Maximize value
1466 GeneralOptimizationDialog.goal.minimize = Minimize value
1467 GeneralOptimizationDialog.goal.seek = Seek value of
1468 GeneralOptimizationDialog.btn.start = Start optimization
1469 GeneralOptimizationDialog.btn.stop = Stop optimization
1470 GeneralOptimizationDialog.lbl.paramsToOptimize = Parameters to optimize:
1471 GeneralOptimizationDialog.btn.add = Add
1472 GeneralOptimizationDialog.btn.add.ttip = Add the selected parameter to the optimization
1473 GeneralOptimizationDialog.btn.remove = Remove
1474 GeneralOptimizationDialog.btn.remove.ttip = Remove the selected parameter from the optimization
1475 GeneralOptimizationDialog.btn.removeAll = Remove all
1476 GeneralOptimizationDialog.btn.removeAll.ttip = Remove all parameters from the optimization
1477 GeneralOptimizationDialog.lbl.availableParams = Available parameters:
1478 GeneralOptimizationDialog.lbl.optimizationOpts = Optimization options
1479 GeneralOptimizationDialog.lbl.optimizeSim = Optimize simulation:
1480 GeneralOptimizationDialog.lbl.optimizeSim.ttip = Select which simulation to optimize
1481 GeneralOptimizationDialog.lbl.optimizeValue = Optimized value:
1482 GeneralOptimizationDialog.lbl.optimizeValue.ttip = Select what value is to be optimized
1483 GeneralOptimizationDialog.lbl.optimizeGoal = Optimization goal:
1484 GeneralOptimizationDialog.lbl.optimizeGoal.ttip = Select the goal of the optimization
1485 GeneralOptimizationDialog.lbl.optimizeGoalValue.ttip = Custom value to seek
1486 GeneralOptimizationDialog.lbl.requireStability = Required stability
1487 GeneralOptimizationDialog.lbl.requireMinStability = Minimum stability:
1488 GeneralOptimizationDialog.lbl.requireMinStability.ttip = Require a minimum static stability margin for the design
1489 GeneralOptimizationDialog.lbl.requireMaxStability = Maximum stability:
1490 GeneralOptimizationDialog.lbl.requireMaxStability.ttip = Require a maximum static stability margin for the design
1491 GeneralOptimizationDialog.status.bestValue = Best value:
1492 GeneralOptimizationDialog.status.bestValue.ttip = Best optimization value found so far.
1493 GeneralOptimizationDialog.status.stepCount = Step count:
1494 GeneralOptimizationDialog.status.stepCount.ttip = Number of optimization steps that have been performed.
1495 GeneralOptimizationDialog.status.evalCount = Evaluations:
1496 GeneralOptimizationDialog.status.evalCount.ttip = Total number of function evaluations (simulations) that have been performed.
1497 GeneralOptimizationDialog.status.stepSize = Step size:
1498 GeneralOptimizationDialog.status.stepSize.ttip = Current optimization step size (relative to the optimization parameter ranges)
1499 GeneralOptimizationDialog.btn.plotPath = Plot path
1500 GeneralOptimizationDialog.btn.plotPath.ttip = Plot the optimization path (one and two dimensional optimization only)
1501 GeneralOptimizationDialog.btn.save = Save path
1502 GeneralOptimizationDialog.btn.save.ttip = Save the results of the function evaluations (simulations) as a CSV file.
1503 GeneralOptimizationDialog.btn.apply = Apply optimization
1504 GeneralOptimizationDialog.btn.apply.ttip = Apply the optimization results to the rocket design
1505 GeneralOptimizationDialog.btn.reset = Reset
1506 GeneralOptimizationDialog.btn.reset.ttip = Reset the rocket design to the current rocket design
1507 GeneralOptimizationDialog.btn.close = Close
1508 GeneralOptimizationDialog.btn.close.ttip = Close the dialog without modifying the rocket design
1509 GeneralOptimizationDialog.error.selectParams.text = First select some parameters to optimize from the available parameters.
1510 GeneralOptimizationDialog.error.selectParams.title = Select optimization parameters
1511 GeneralOptimizationDialog.error.optimizationFailure.text = The optimization failed to run:
1512 GeneralOptimizationDialog.error.optimizationFailure.title = Optimization failed
1513 GeneralOptimizationDialog.undoText = Apply optimization
1514 GeneralOptimizationDialog.basicSimulationName = Basic simulation
1515 GeneralOptimizationDialog.noSimulationName = No simulation
1516 GeneralOptimizationDialog.table.col.parameter = Parameter
1517 GeneralOptimizationDialog.table.col.current = Current
1518 GeneralOptimizationDialog.table.col.min = Minimum
1519 GeneralOptimizationDialog.table.col.max = Maximum
1520 GeneralOptimizationDialog.export.header = Include header line
1521 GeneralOptimizationDialog.export.header.ttip = Include a header line as the first line containing the field descriptions.
1522 GeneralOptimizationDialog.export.stability = Stability
1525 ! Dialog for plotting optimization results
1526 OptimizationPlotDialog.title = Optimization results
1527 OptimizationPlotDialog.lbl.zoomInstructions = Click and drag down+right to zoom in, up+left to zoom out
1528 OptimizationPlotDialog.plot1d.title = Optimization result
1529 OptimizationPlotDialog.plot1d.series = Optimization result
1530 OptimizationPlotDialog.plot2d.title = Optimization path
1531 OptimizationPlotDialog.plot2d.path = Optimization path
1532 OptimizationPlotDialog.plot2d.evals = Evaluations
1533 OptimizationPlotDialog.plot.ttip.stability = Stability:
1534 OptimizationPlotDialog.plot.label.optimum = Optimum
1536 ! Optimization parameters
1537 MaximumAltitudeParameter.name = Apogee altitude
1538 MaximumVelocityParameter.name = Maximum velocity
1539 MaximumAccelerationParameter.name = Maximum acceleration
1540 StabilityParameter.name = Stability
1541 GroundHitVelocityParameter.name = Ground hit speed
1542 LandingDistanceParameter.name = Landing distance
1543 TotalFlightTimeParameter.name = Total flight time
1544 DeploymentVelocityParameter.name = Velocity at parachute deployment
1547 ! Compass directions drawn on a compass rose.
1548 CompassRose.lbl.north = N
1549 CompassRose.lbl.east = E
1550 CompassRose.lbl.south = S
1551 CompassRose.lbl.west = W
1553 ! Compass directions with subdirections. These might not be localized even if the directions on the compass rose are.
1554 CompassSelectionButton.lbl.N = N
1555 CompassSelectionButton.lbl.NE = NE
1556 CompassSelectionButton.lbl.E = E
1557 CompassSelectionButton.lbl.SE = SE
1558 CompassSelectionButton.lbl.S = S
1559 CompassSelectionButton.lbl.SW = SW
1560 CompassSelectionButton.lbl.W = W
1561 CompassSelectionButton.lbl.NW = NW
1564 SlideShowDialog.btn.next = Next
1565 SlideShowDialog.btn.prev = Previous
1567 SlideShowLinkListener.error.title = Guided tour not found
1568 SlideShowLinkListener.error.msg = Sorry, the selected tour has not yet been written.
1570 GuidedTourSelectionDialog.title = Guided tours
1571 GuidedTourSelectionDialog.lbl.selectTour = Select guided tour:
1572 GuidedTourSelectionDialog.lbl.description = Tour description:
1573 GuidedTourSelectionDialog.lbl.length = Number of slides:
1574 GuidedTourSelectionDialog.btn.start = Start tour!
1577 ! Custom Fin BMP Importer
1578 CustomFinImport.button.label = Import from image
1579 CustomFinImport.badFinImage = Invalid fin image. Must be a black and white image (black for the fin), not touching any side, except the bottom of the image, which is the base of the fin.
1580 CustomFinImport.errorLoadingFile = Error loading file:
1581 CustomFinImport.errorParsingFile = Error parsing fin image:
1582 CustomFinImport.undo = Import freeform fin set
1583 CustomFinImport.error.title = Error loading fin profile
1584 CustomFinImport.error.badimage = Could not deduce fin shape from image.
1585 CustomFinImport.description = The image must be a black and white image (black for the fin), not touching any side, except the bottom of the image, which is the base of the fin.
projects / debian / openrocket / blob