8 # Contributed by Eric DOUTRELEAU <Eric.Doutreleau@int-evry.fr>
9 # This is supposed to work with Zubkoff/Dandelion version of mtx
11 # Modified by Joe Rhett <jrhett@isite.net>
12 # to work with MTX 1.2.9 by Eric Lee Green http://mtx.sourceforge.net
14 # Modified by Jason Hollinden <jhollind@sammg.com> on 13-Feb-2001
15 # to work with MTX 1.2.10, >9 slots, has barcode support, and works with
16 # multiple configs at once.
17 # NOTE: Only tested the 2 additions with an ADIC Scalar 100.
19 ################################################################################
20 # Here are the things you need to do and know to configure this script:
22 # * Figure out what the robot device name is and what the tape drive
23 # device name is. They will be different!
25 # You cannot send robot commands to a tape drive and vice versa.
26 # Both should respond to "mtx -f /dev/... inquiry". Hopefully,
27 # that output will make it obvious which is which.
29 # For instance, here is what mtx has to say about my current robot:
31 # Product Type: Medium Changer
33 # Product ID: 'ACL2640 206 '
35 # Attached Changer: No
37 # and here is what it says about a tape drive:
39 # Product Type: Tape Drive
40 # Vendor ID: 'Quantum '
41 # Product ID: 'DLT4000 '
43 # Attached Changer: No
45 # Note the "Product Type" value makes it clear which is which.
47 # If it is not obvious, "mf -f /dev/... rewind" should be happy when
48 # talking to a (loaded) tape drive but the changer should give some
49 # kind of error. Similarly, "mtx -f /dev/... status" should show good
50 # results with the changer but fail with a tape drive device name.
52 # Once you have this figured out, set "changerdev" in amanda.conf
53 # to the changer device and "tapedev" to the tape device.
55 # * Find out what the first and last storage slots are. Running
56 # "mtx -f /dev/... status" should give you something like this
57 # (although the output will vary widely based on the version of mtx
58 # and the specifics of your robot):
60 # Storage Changer /dev/changer:1 Drives, 9 Slots ( 0 Import/Export )
61 # Data Transfer Element 0:Empty
62 # Storage Element 1:Full :VolumeTag=SR0001
63 # Storage Element 2:Full :VolumeTag=SR0002
64 # Storage Element 3:Full :VolumeTag=SR0003
65 # Storage Element 4:Full :VolumeTag=SR0004
66 # Storage Element 5:Full :VolumeTag=SR0005
67 # Storage Element 6:Full :VolumeTag=SR0006
68 # Storage Element 7:Full :VolumeTag=SR0007
69 # Storage Element 8:Full :VolumeTag=SR0008
70 # Storage Element 9:Full :VolumeTag=SR0009
72 # This says the first storage slot (element) is "1" and the last
73 # is "9". If you allocate the entire robot to Amanda, you do not need
74 # to set the "firstslot" or "lastslot" configuration file variables --
75 # the script will compute these values for you.
77 # You do not have to allocate all of the slots for Amanda use,
78 # but whatever slots you use must be contiguous (i.e. 4 through 9
79 # in the above would be OK but 1, 2, 5, 6, 9 would not). The one
80 # exception to this is that if one of the slots contains a cleaning
81 # cartridge, it may be in any slot (Amanda will just skip over it if
82 # it is between firstslot and lastslot).
84 # * Speaking of cleaning cartridges, if you have a storage slot dedicated
85 # to one, figure out what slot it is in. That slot number will go in
86 # the "cleanslot" variable.
88 # Also, decide if you want the changer script to automatically run
89 # the cleaning tape through the drive after every so many mounts,
90 # and how many mounts you want to do between cleanings. If you
91 # want the script to do this, set the "autoclean" variable to 1 and
92 # the "autocleancount" to the number of mounts between cleanings.
93 # If you do not want to do automatic cleanings (including not having
94 # a cleaning cartridge in the robot), set "autoclean" to 0.
96 # Note that only a count of mounts is used to determine when it is
97 # time to clean. The script does not try to detect if the drive is
98 # requesting cleaning, or how much the drive was used on a given
101 # * If you tell Amanda about a cleaning cartridge, whether for automatic
102 # operation or manual (amtape <config> clean), you must also tell
103 # the script how long it takes to run the cleaning cycle. It is
104 # impossible for the script to determine when the cleaning operation
105 # is done, so the "cleancycle" variable is the number of seconds
106 # the longest cleaning operation takes (you'll just have to figure
107 # this out by watching it a few times, or maybe finding it in a tape
108 # drive hardware manual). The script will sleep for this length of
109 # time whenever the cleaning tape is referenced. The default is 120
110 # seconds (two minutes).
112 # * Figure out the drive slot number. By default, it is set to 0.
113 # In the example above, the tape drive ("Data Transfer Element")
114 # is in slot 0. If your drive slot is not 0, you
115 # need to set the drive slot number with the "driveslot" variable.
117 # * Figure out whether your robot has a barcode reader and whether
118 # your version of mtx supports it. If you see "VolumeTag" entries
119 # in the "mtx -f /dev/xxx status" output you did above, you have
120 # a reader and mtx can work with it, so you may set the "havereader"
121 # variable to 1. The default is 0 (do not use a reader).
123 # * Pick any tape to load and then determine if the robot can put it
124 # away directly or whether an "offline" must be done first.
126 # With the tape still mounted and ready, try to put the tape away
127 # with "mtx". If you get some kind of error, which is the most
128 # common response, try "mt -f /dev/... offline", wait for the drive
129 # to unload and make sure the robot takes no action on its own to
130 # store the tape. Assuming it does not, try the "mtx" command again
133 # If you had to issue the "mt -f /dev/... offline" before you could
134 # use "mtx" to store the tape, set the "offline_before_unload"
135 # variable to 1. If "mtx" unloaded the drive and put the tape away
136 # all by itself, set it to 0.
138 # * Some drives and robots require a small delay between unloading the
139 # tape and instructing the robot to move it back to storage.
140 # For instance, if you try to grab the tape too soon on an ATL robot
141 # with DLT tape drives, it will rip the leader out of the drive and
142 # require sincerely painful hardware maintenance.
144 # If you need a little delay, set the "unloadpause" variable to
145 # the number of seconds to wait before trying to take a tape from
146 # a drive back to storage. The default is 0.
148 # * Some drives also require a short pause after loading, or the drive
149 # will return an I/O error during a test to see if it's online (which
150 # this script uses "mt rewind" to test). My drives don't recover from
151 # this, and must be reloaded before they will come online after failing
152 # such a test. For this reason there is an "initial_poll_delay"
153 # variable which will pause for a certain number of seconds before
154 # looping through the online test for the first time. The default is 0.
158 # Now you are ready to set up the variables in the changer configuration
161 # All variables are in "changerfile".conf where "changerfile" is set
162 # in amanda.conf. For example, if amanda.conf has:
164 # changerfile="/etc/amanda/Dailyset1/CHANGER"
166 # the variables must be in "/etc/amanda/Dailyset1/CHANGER.conf".
168 # If "changerfile" is a relative path, it is relative to the directory
169 # that contains amanda.conf. That also happens to be the directory Amanda
170 # makes current before running this script.
172 # Here is a commented out example file with all the variables and showing
173 # their default value (if any):
175 # firstslot=? #### First storage slot (element) -- required
176 # lastslot=? #### Last storage slot (element) -- required
177 # cleanslot=-1 #### Slot with cleaner tape -- default is "-1"
178 # #### Set negative to indicate no cleaner available
179 # driveslot=0 #### Drive slot number. Defaults to 0
180 # #### Use the 'Data Transfer Element' you want
182 # # Do you want to clean the drive after a certain number of accesses?
183 # # NOTE - This is unreliable, since 'accesses' aren't 'uses', and we
184 # # have no reliable way to count this. A single amcheck could
185 # # generate as many accesses as slots you have, plus 1.
186 # # ALSO NOTE - many modern tape loaders handle this automatically.
188 # autoclean=0 #### Set to '1' or greater to enable
190 # autocleancount=99 #### Number of access before a clean.
192 # havereader=0 #### If you have a barcode reader, set to 1.
194 # offline_before_unload=0 #### Does your robot require an
195 # #### 'mt offline' before mtx unload?
197 # poll_drive_ready=NN #### Time (seconds) between tests to see if
198 # #### the tape drive has gone ready (default: 3).
200 # max_drive_wait=NN #### Maximum time (seconds) to wait for the
201 # #### tape drive to become ready (default: 120).
203 # initial_poll_delay=NN #### initial delay after load before polling for
208 # Now it is time to test the setup. Do all of the following in the
209 # directory that contains the amanda.conf file, and do all of it as
214 # .../chg-zd-mtx -info
215 # echo $? #### (or "echo $status" if you use csh/tcsh)
217 # You should get a single line from the script like this (the actual
218 # numbers will vary):
222 # The first number (5) is the "current" slot. This may or may not be
223 # the slot actually loaded at the moment (if any). It is the slot
224 # Amanda will try to use next.
226 # The second number (9) is the number of slots.
228 # The third number will always be "1" and indicates the changer is
229 # capable of going backward.
231 # The fourth number is optional. If you set $havereader to 1, it
232 # will be "1", otherwise it will not be present.
234 # The exit code ($? or $status) should be zero.
238 # .../chg-zd-mtx -reset
241 # The script should output a line like this:
245 # The number at the first should match $firstslot. The device name
246 # after that should be your tape device.
248 # The exit code ($? or $status) should be zero.
252 # .../chg-zd-mtx -slot next
255 # The script should output a line like this:
259 # The number at the first should be one higher than $firstslot.
260 # The device name after that should be your tape device.
262 # The exit code ($? or $status) should be zero.
266 # .../chg-zd-mtx -slot current
269 # Assuming the tape is still loaded from the previous test, the
270 # robot should not move and the script should report the same thing
271 # the previous command did.
273 # * If you continue to run "-slot next" commands, the robot should load
274 # each tape in turn then wrap back around to the first when it
275 # reaches $lasttape. If $cleanslot is within the $firstslot to
276 # $lastslot range, the script will skip over that entry.
278 # * Finally, try some of the amtape commands and make sure they work:
280 # amtape <config> reset
281 # amtape <config> slot next
282 # amtape <config> slot current
284 # * If you set $havereader non-zero, now would be a good time to create
285 # the initial barcode database:
287 # amtape <config> update
290 ################################################################################
291 # To debug this script, first look in @AMANDA_DBGDIR@. The script
292 # uses one of two log files there, depending on what version of Amanda
293 # is calling it. It may be chg-zd-mtx.YYYYMMDD*.debug, or it may be
294 # changer.debug.driveN where 'N' is the drive number.
296 # If the log file does not help, try running the script, **as the Amanda
297 # user**, in the amanda.conf directory with whatever set of args the log
298 # said were used when you had a problem. If nothing else useful shows up
299 # in the output, try running the script with the DEBUG environment variable
300 # set non-null, e.g.:
302 # env DEBUG=yes .../chg-zd-mtx ...
303 ################################################################################
305 ################################################################################
306 # You may need to customize these things
307 ################################################################################
313 ################################################################################
314 # No user-level customization should be required beyond this point.
315 ################################################################################
317 test -n "$DEBUG" && set -x
318 TMPDIR="@AMANDA_TMPDIR@"
319 DBGDIR="@AMANDA_DBGDIR@"
322 myname=`expr "$argv0" : '.*/\(.*\)'`
324 config=`pwd 2>/dev/null`
325 config=`expr "$config" : '.*/\(.*\)'`
328 # Functions to write a new log file entry and append more log information.
331 ds=`date '+%H:%M:%S' 2>/dev/null`
332 if [ $? -eq 0 -a -n "$ds" ]; then
333 logprefix=`echo "$ds" | sed 's/./ /g'`
339 if [ -z "$logprefix" ]; then
340 echo "$@" >> $DBGFILE
342 echo "$logprefix" "$@" >> $DBGFILE
347 if [ -z "$logprefix" ]; then
348 echo "===" "`date`" "===" >> $DBGFILE
349 echo "$@" >> $DBGFILE
351 ds=`date '+%H:%M:%S' 2>/dev/null`
352 echo "$ds" "$@" >> $DBGFILE
357 # Common exit function.
361 # $3 = additional information (error message, tape devive, etc)
366 if [ $internal_call -gt 0 ]; then
376 Log $call_type "($code)" "->" "$exit_slot" "$@"
377 echo "$exit_slot" "$@"
378 if [ $call_type = Return ]; then
381 amgetconf$SUF dbclose.$argv0:$DBGFILE > /dev/null 2>&1
386 # Function to run another command and log it.
391 rm -f $stdout $stderr
392 "$@" > $stdout 2> $stderr
394 Log Exit code: $exitcode
398 cat $stdout >> $DBGFILE
403 cat $stderr >> $DBGFILE
411 # Return success if the arg is numeric.
415 test -z "$1" && return 1
416 x="`expr "$1" : '\([-0-9][0-9]*\)' 2>/dev/null`"
417 return `expr X"$1" != X"$x"`
421 # Run $MTX status unless the previous output is still valid.
426 test -n "$DEBUG" && set -x
427 if [ $mtx_status_valid -ne 0 ]; then
431 Run $MTX status > $mtx_status 2>&1
433 if [ $status -eq 0 ]; then
440 # Determine the slot currently loaded. Set $loadedslot to the slot
441 # currently loaded, or "-1", and $loadedbarcode to the corresponding
442 # barcode (or nothing).
446 test -n "$DEBUG" && set -x
450 /^Data Transfer Element:Empty/ {
454 /^Data Transfer Element '$driveslot':Empty/ {
458 /^Data Transfer Element:Full (Storage Element \([0-9][0-9]*\) Loaded):VolumeTag *= *\([^ ]*\)/ {
459 s/.*(Storage Element \([0-9][0-9]*\) Loaded):VolumeTag *= *\([^ ]*\)/\1 \2/p
462 /^Data Transfer Element '$driveslot':Full (Storage Element \([0-9][0-9]*\) Loaded):VolumeTag *= *\([^ ]*\)/ {
463 s/.*(Storage Element \([0-9][0-9]*\) Loaded):VolumeTag *= *\([^ ]*\)/\1 \2/p
466 /^Data Transfer Element '$driveslot':Full (Unknown Storage Element Loaded):VolumeTag *= *\([^ ]*\)/ {
467 s/.*:VolumeTag *= *\([^ ]*\)/-2 \1/p
470 /^Data Transfer Element:Full (Storage Element \([0-9][0-9]*\) Loaded)/ {
471 s/.*(Storage Element \([0-9][0-9]*\) Loaded).*/\1/p
474 /^Data Transfer Element '$driveslot':Full (Storage Element \([0-9][0-9]*\) Loaded)/ {
475 s/.*Storage Element \([0-9][0-9]*\) Loaded.*/\1/p
478 /^Data Transfer Element '$driveslot':Full (Unknown Storage Element Loaded)/ {
482 ' < $mtx_status 2>&1`
483 shift # get rid of the "x"
486 if [ -z "$loadedslot" ]; then
487 Exit 2 "<none>" "could not determine current slot, are you sure your drive slot is $driveslot"
488 return $? # in case we are internal
491 #Use the current slot if it's empty and we don't know which slot is loaded'
492 if [ $loadedslot -eq -2 ]; then
495 /^.*Storage Element '$currentslot':Empty/ {
496 s/.*Storage Element \([0-9][0-9]*\):Empty/\1/p
499 /^.*Storage Element '$currentslot':Full/ {
500 s/.*Storage Element \([0-9][0-9]*\):Full/-2/p
504 ' < $mtx_status 2>& 1`
505 shift # get rid of the "x"
507 if [ ! -z $loadedslotx ]; then
508 loadedslot=$loadedslotx
512 #Use the first empty slot if we don't know which slot is loaded'
513 if [ $loadedslot -eq -2 ]; then
516 /^.*Storage Element \([0-9][0-9]*\):Empty/ {
517 s/.*Storage Element \([0-9][0-9]*\):Empty/\1/p
521 ' < $mtx_status 2>& 1`
522 shift # get rid of the "x"
526 if IsNumeric "$loadedslot" ; then
531 "currently loaded slot ($loadedslot) not numeric"
532 return $? # in case we are internal
534 Log "STATUS -> currently loaded slot = $loadedslot"
535 LogAppend " -> currently loaded barcode = \"$loadedbarcode\""
539 # Get a list of slots between $firstslot and $lastslot, if they are set.
540 # If they are not set, set them to the first and last slot seen on the
541 # assumption the entire robot is to be used (???).
546 test -n "$DEBUG" && set -x
547 if [ -n "$slot_list" ]; then
552 /^Data Transfer Element:Full (Storage Element \([0-9][0-9]*\) Loaded)/ {
553 s/.*(Storage Element \([0-9][0-9]*\) Loaded).*/\1/p
555 /^Data Transfer Element '$driveslot':Full (Storage Element \([0-9][0-9]*\) Loaded)/ {
556 s/.*Storage Element \([0-9][0-9]*\) Loaded.*/\1/p
558 /^Data Transfer Element '$driveslot':Full (Unknown Storage Element Loaded)/ {
561 /^.*Storage Element \([0-9][0-9]*\):Full/ {
562 s/.*Storage Element \([0-9][0-9]*\):Full.*/\1/p
565 /^.*Storage Element \([0-9][0-9]*\):Empty/ {
566 s/.*Storage Element \([0-9][0-9]*\):Empty/\1/p
569 /^.*Storage Element \([0-9][0-9]*\):Full/ {
570 s/.*Storage Element \([0-9][0-9]*\):Full.*/\1/p
572 ' < $mtx_status 2>&1 | grep -v "^${cleanslot}\$" | sort -n`
573 slot_list=`echo $slot_list` # remove the newlines
574 if [ $firstslot -lt 0 -o $lastslot -lt 0 ]; then
576 for slot in $slot_list; do
577 if [ $firstslot -lt 0 ]; then
578 Log "SLOTLIST -> firstslot set to $slot"
581 if [ $lastslot -lt 0 ]; then
585 if [ $lastslot -lt 0 -a $last -ge 0 ]; then
586 Log "SLOTLIST -> lastslot set to $last"
589 if [ $firstslot -lt 0 ]; then
592 "cannot determine first slot"
593 return $? # in case we are internal
594 elif [ $lastslot -lt 0 ]; then
597 "cannot determine last slot"
598 return $? # in case we are internal
602 for slot in $slot_list; do
603 if [ $slot -ge $firstslot -a $slot -le $lastslot ]; then
604 amanda_slot_list="$amanda_slot_list $slot"
607 if [ -z "$amanda_slot_list" ]; then
611 return $? # in case we are internal
613 slot_list="$amanda_slot_list"
618 exec_prefix=@exec_prefix@
620 libexecdir=@libexecdir@
622 # try to hit all the possibilities here
623 PATH=$sbindir:$libexecdir:/usr/bin:/bin:/usr/sbin:/sbin:/usr/ucb:/usr/local/bin
626 USE_VERSION_SUFFIXES="@USE_VERSION_SUFFIXES@"
627 if test "$USE_VERSION_SUFFIXES" = "yes"; then
633 DBGFILE=`amgetconf$SUF dbopen.$argv0 2>/dev/null | grep -v BUGGY`
636 DBGFILE=/dev/null # will try this again below
639 changerfile=`amgetconf$SUF changerfile 2>/dev/null | grep -v BUGGY`
640 if [ -z "$changerfile" ]; then
643 "changerfile must be specified in amanda.conf"
646 tape=`amgetconf$SUF tapedev 2>/dev/null | grep -v BUGGY`
647 if [ -z "$tape" ]; then
650 "tapedev may not be empty"
651 elif [ $tape = "/dev/null" -o `expr "$tape" : 'null:'` -eq 5 ]; then
654 "tapedev ($tape) may not be the null device"
656 TAPE=`amgetconf$SUF changerdev 2>/dev/null | grep -v BUGGY`
657 if [ -z "$TAPE" ]; then
660 "changerdev may not be empty"
661 elif [ $TAPE = "/dev/null" ]; then
664 "changerdev ($TAPE) may not be the null device"
666 export TAPE # for mtx command
668 #### Set up the various config files.
670 configfile=$changerfile.conf
671 cleanfile=$changerfile-clean
672 accessfile=$changerfile-access
673 slotfile=$changerfile-slot
674 labelfile=$changerfile-barcodes
675 [ ! -s $cleanfile ] && echo 0 > $cleanfile
676 [ ! -s $accessfile ] && echo 0 > $accessfile
677 [ ! -s $slotfile ] && echo -1 > $slotfile
678 [ ! -f $labelfile ] && > $labelfile
679 cleancount=`cat $cleanfile`
680 accesscount=`cat $accessfile`
682 #### Dig out of the config file what is needed
685 varlist="$varlist firstslot"
686 varlist="$varlist lastslot"
687 varlist="$varlist cleanslot"
688 varlist="$varlist cleancycle"
689 varlist="$varlist OFFLINE_BEFORE_UNLOAD" # old name
690 varlist="$varlist offline_before_unload"
691 varlist="$varlist unloadpause"
692 varlist="$varlist AUTOCLEAN" # old name
693 varlist="$varlist autoclean"
694 varlist="$varlist autocleancount"
695 varlist="$varlist havereader"
696 varlist="$varlist driveslot"
697 varlist="$varlist poll_drive_ready"
698 varlist="$varlist initial_poll_delay"
699 varlist="$varlist max_drive_wait"
703 val="`cat $configfile 2>/dev/null | sed -n '
704 # Ignore comment lines (anything starting with a #).
706 # Find the first var=val line in the file, print the value and quit.
707 /^[ ]*'$var'[ ]*=[ ]*\([^ ][^ ]*\).*/ {
708 s/^[ ]*'$var'[ ]*=[ ]*\([^ ][^ ]*\).*/\1/p
715 # Deal with driveslot first so we can get DBGFILE set if we are still
716 # using the old amgetconf.
718 if [ -z "$driveslot" ]; then
722 # Get DBGFILE set if it is not already.
724 if [ $DBGFILE = /dev/null ]; then
725 if [ -d "$DBGDIR" ]; then
726 DBGFILE=$DBGDIR/changer.debug.drive$driveslot
730 Log === Start "`date`" ===
732 if [ -z "$driveslot" ]; then
735 "cannot determine drive slot from $tape"
738 stdout=$TMPDIR/$myname.1.$$
739 stderr=$TMPDIR/$myname.2.$$
740 mtx_status=$TMPDIR/$myname.status.$$
741 trap "rm -f $stdout $stderr $mtx_status" 0 # exit cleanup
743 Log "Using config file $configfile"
745 # Log the argument list.
750 LogAppend "\$$i = \"$argv0\""
753 LogAppend "\$$i = \"$arg\""
756 # Set the default config values for those not in the file. Log the
757 # results and make sure each is valid (numeric).
759 firstslot=${firstslot:-'-1'} # default: mtx status
760 lastslot=${lastslot:-'-1'} # default: mtx status
761 cleanslot=${cleanslot:-'-1'} # default: -1
762 cleancycle=${cleancycle:-'120'} # default: two minutes
763 if [ -z "$offline_before_unload" -a -n "$OFFLINE_BEFORE_UNLOAD" ]; then
764 offline_before_unload=$OFFLINE_BEFORE_UNLOAD # (old name)
766 offline_before_unload=${offline_before_unload:-'0'} # default: 0
767 unloadpause=${unloadpause:-'0'} # default: 0
768 if [ -z "$autoclean" -a -n "$AUTOCLEAN" ]; then
769 autoclean=$AUTOCLEAN # (old name)
771 autoclean=${autoclean:-'0'} # default: 0
772 autocleancount=${autocleancount:-'99'} # default: 99
773 havereader=${havereader:-'0'} # default: 0
774 poll_drive_ready=${poll_drive_ready:-'3'} # default: three seconds
775 initial_poll_delay=${initial_poll_delay:-'0'} # default: zero zeconds
776 max_drive_wait=${max_drive_wait:-'120'} # default: two minutes
781 for var in $varlist; do
782 if [ $var = "OFFLINE_BEFORE_UNLOAD" ]; then
784 elif [ $var = "AUTOCLEAN" ]; then
788 if [ -z "$val" ]; then
791 "$var missing in $configfile"
793 if IsNumeric "$val" ; then
798 "$var ($val) not numeric in $configfile"
800 LogAppend $var = \"$val\"
803 # Run the rest of the config file sanity checks.
805 if [ $firstslot -gt $lastslot ]; then
808 "firstslot ($firstslot) greater than" \
809 "lastslot ($lastslot) in $configfile"
811 if [ $autoclean -ne 0 -a $cleanslot -lt 0 ]; then
814 "autoclean set but cleanslot not valid ($cleanslot)"
817 # Set up the current slot
819 currentslot=`cat $slotfile`
820 if IsNumeric "$currentslot" ; then
821 if [ $currentslot -lt $firstslot ]; then
822 Log "SETUP -> current slot $currentslot" \
823 "less than $firstslot ..." \
824 "resetting to $firstslot"
825 currentslot=$firstslot
826 elif [ $currentslot -gt $lastslot ]; then
827 Log "SETUP -> current slot $currentslot" \
828 "greater than $lastslot ..." \
829 "resetting to $lastslot"
830 currentslot=$lastslot
833 Log "SETUP -> contents of $slotfile ($currentslot) invalid," \
834 "setting current slot to first slot ($firstslot)"
835 currentslot=$firstslot
839 first_slot_in_list=-1
840 next_slot_after_current=-1
841 for slot in $slot_list; do
842 if [ $first_slot_in_list -lt 0 ]; then
843 first_slot_in_list=$slot # in case $firstslot is missing
845 if [ $slot -eq $currentslot ]; then
848 elif [ $slot -gt $currentslot ]; then
849 next_slot_after_current=$slot # $currentslot is missing
853 if [ $found_current -eq 0 ]; then
854 if [ $next_slot_after_current -lt 0 ]; then
855 new_currentslot=$first_slot_in_list
857 new_currentslot=$next_slot_after_current
859 Log "WARNING -> current slot $currentslot not available," \
860 "setting current slot to next slot ($new_currentslot)"
861 currentslot=$new_currentslot
867 # Eject the current tape and put it away.
871 test -n "$DEBUG" && set -x
872 Log "EJECT -> ejecting tape from $tape"
874 if [ $loadedslot -gt 0 ]; then
875 Log "EJECT -> moving tape from drive $driveslot" \
876 "to storage slot $loadedslot"
877 if [ $offline_before_unload -ne 0 ]; then
878 Run $MT $MTF $tape offline > /dev/null 2>&1
881 result=`Run $MTX unload $loadedslot $driveslot 2>&1`
883 Log " -> status $status, result \"$result\""
885 if [ $status -ne 0 ]; then
893 answer="Drive was not loaded"
896 Exit $code "$loadedslot" "$answer"
897 return $? # in case we are internal
901 # Reset the robot back to the first slot.
905 test -n "$DEBUG" && set -x
906 Log "RESET -> loading tape from slot $firstslot" \
907 "to drive $driveslot ($tape)"
908 # Call loadslot without doing it as an internal and let it finish
912 Exit 2 "<none>" "reset: should not get here"
913 return $? # in case we are internal
917 # Unload the current tape (if necessary) and load a new one (unless
918 # "advance"). If no tape is loaded, get the value of "current" from
923 test -n "$DEBUG" && set -x
924 if [ $# -lt 1 ]; then
925 Exit 2 "<none>" "Missing -slot argument"
926 return $? # in case we are internal
929 Log "LOADSLOT -> load drive $driveslot ($tape) from slot $whichslot"
931 numeric=`echo $whichslot | sed 's/[^0-9]//g'`
933 current|prev|next|advance)
934 find_slot=$currentslot
949 Exit 2 "<none>" "Illegal slot: \"$whichslot\""
950 return $? # in case we are internal
954 # Find the requested slot in the slot list. By loading the "set"
955 # command with multiple copies, we guarantee that if the slot is
956 # found, we can look both forward and backward without running
957 # off the end. Putting $cleanslot at the end allows us to find
958 # that slot since it is not in $slot_list.
960 set x $slot_list $slot_list $slot_list $cleanslot
961 shift # get rid of the "x"
964 while [ $# -gt 0 ]; do
965 if [ $1 -eq $find_slot ]; then
971 if [ $# -le 0 ]; then
974 "Cannot find slot $find_slot" \
975 "in slot list ($slot_list)"
976 return $? # in case we are internal
979 # Determine the slot to load.
992 # If the desired slot is already loaded, we are done. Only update
993 # current slot if this is not the cleaning slot.
995 if [ $loadslot = $loadedslot ]; then
996 if [ $loadslot -ne $cleanslot ]; then
998 echo $loadslot > $slotfile
1000 Exit 0 "$loadedslot" "$tape"
1001 return $? # in case we are internal
1003 if [ $loadedslot -eq -2 ]; then
1004 Exit 0 "$loadedslot" "$tape"
1005 return $? # in case we are internal
1008 # If we are loading the cleaning tape, bump the cleaning count
1009 # and reset the access count. Otherwise, bump the access count
1010 # and see if it is time to do a cleaning.
1011 if [ $loadslot = $cleanslot ]; then
1012 rm -f $cleanfile $accessfile
1013 expr $cleancount + 1 > $cleanfile
1014 echo 0 > $accessfile
1017 expr $accesscount + 1 > $accessfile
1018 if [ $autoclean -ne 0 -a $accesscount -gt $autocleancount ]
1020 internal_call=`expr $internal_call + 1`
1021 loadslot clean > /dev/null 2>&1
1023 internal_call=`expr $internal_call - 1`
1024 if [ $status -ne 0 ]; then
1025 Exit $status "$loadslot" "$exit_answer"
1026 return $? # in case we are internal
1029 # Slot $cleanslot might contain an ordinary tape
1030 # rather than a cleaning tape. A cleaning tape
1031 # *MIGHT* auto-eject; an ordinary tape does not.
1032 # We therefore have to read the status again to
1033 # check what actually happened.
1039 # Unload whatever tape is in the drive.
1040 internal_call=`expr $internal_call + 1`
1041 eject > /dev/null 2>&1
1043 internal_call=`expr $internal_call - 1`
1044 if [ $status -gt 1 ]; then
1045 Exit $status "$exit_slot" "$exit_answer"
1046 return $? # in case we are internal
1049 # If we were doing an "advance", we are done.
1050 if [ $whichslot = advance ]; then
1051 if [ $loadslot -ne $cleanslot ]; then
1053 echo $loadslot > $slotfile
1055 Exit 0 "$loadslot" "/dev/null"
1056 return $? # in case we are internal
1059 # Load the tape, finally!
1060 Log "LOADSLOT -> loading tape from slot $loadslot" \
1061 "to drive $driveslot ($tape)"
1062 result=`Run $MTX load $loadslot $driveslot 2>&1`
1064 Log " -> status $status, result \"$result\""
1066 if [ $status -ne 0 ]; then
1067 Exit 2 "$loadslot" "$result"
1068 return $? # in case we are internal
1072 # Cleaning tapes never go "ready", so instead we just sit here
1073 # for "long enough" (as determined empirically by the user),
1074 # then return success.
1076 if [ $loadslot -eq $cleanslot ]; then
1077 Run sleep $cleancycle
1078 Exit 0 "$loadslot" "$tape"
1079 return $? # in case we are internal
1083 # Wait for the drive to go online.
1087 sleep $initial_poll_delay
1088 while [ $waittime -lt $max_drive_wait ]; do
1089 result=`Run $MT $MTF $tape rewind 2>&1`
1090 if [ $? -eq 0 ]; then
1094 sleep $poll_drive_ready
1095 waittime=`expr $waittime + $poll_drive_ready`
1097 if [ $ready -eq 0 ]; then
1098 Exit 2 "$loadslot" "Drive not ready after" \
1099 "$max_drive_wait seconds," \
1100 "rewind said \"$result\""
1101 return $? # in case we are internal
1104 if [ $loadslot -ne $cleanslot ]; then
1106 echo $loadslot > $slotfile
1108 Exit 0 "$loadslot" "$tape"
1109 return $? # in case we are internal
1113 # Return information about how the changer is configured and the current
1114 # state of the robot.
1118 test -n "$DEBUG" && set -x
1121 Log "INFO -> first slot: $firstslot"
1122 LogAppend " -> current slot: $currentslot"
1123 LogAppend " -> loaded slot: $loadedslot"
1124 LogAppend " -> last slot: $lastslot"
1125 LogAppend " -> slot list: $slot_list"
1126 LogAppend " -> can go backwards: 1"
1127 LogAppend " -> havereader: $havereader"
1130 # Check if a barcode reader is configured or not. If so, it
1131 # passes the 4th item in the echo back to amtape signifying it
1132 # can search based on barcodes.
1135 if [ $havereader -eq 1 ]; then
1139 if [ $currentslot -lt $firstslot -o $currentslot -gt $lastslot ]; then
1140 currentslot=$firstslot # what "current" will get
1143 shift # get rid of the "x"
1145 Exit 0 "$currentslot" "$numslots 1 $reader"
1146 return $? # in case we are internal
1150 # Read the labelfile and scan for a particular entry.
1154 labelfile_entry_found=0
1162 while read lbl bc junk; do
1163 line=`expr $line + 1`
1164 if [ -z "$lbl" -o -z "$bc" -o -n "$junk" ]; then
1165 Log "ERROR -> Line $line malformed: $lbl $bc $junk"
1166 LogAppend " -> Remove $labelfile" \
1168 "\"$sbindir/amtape $config update\""
1171 "Line $line malformed in $labelfile: $lbl $bc $junk"
1172 return $? # in case we are internal
1174 if [ $lbl = "$lbl_search" -o $bc = "$bc_search" ]; then
1175 if [ $labelfile_entry_found -ne 0 ]; then
1176 Log "ERROR -> Duplicate entries: $labelfile line $line"
1177 LogAppend " -> Remove $labelfile" \
1179 "\"$sbindir/amtape $config update\""
1182 "Duplicate entries: $labelfile line $line"
1183 return $? # in case we are internal
1185 labelfile_entry_found=1
1186 labelfile_label=$lbl
1187 labelfile_barcode=$bc
1193 # Adds the label and barcode for the currently loaded tape to the
1194 # barcode file. Return an error if the database is messed up.
1198 test -n "$DEBUG" && set -x
1199 if [ $# -lt 1 ]; then
1200 Exit 2 "<none>" "Missing -label argument"
1201 return $? # in case we are internal
1204 if [ $havereader -eq 0 ]; then
1205 Exit 2 "<none>" "Not configured with barcode reader"
1206 return $? # in case we are internal
1209 if [ $loadedslot -lt 0 ]; then
1210 Exit 1 "<none>" "No tape currently loaded"
1211 return $? # in case we are internal
1213 Log "LABEL -> Adding label \"$tapelabel\"" \
1214 "with barcode \"$loadedbarcode\"" \
1215 "for slot $loadedslot" \
1217 read_labelfile "$tapelabel" "$loadedbarcode" < $labelfile
1218 if [ $labelfile_entry_found -ne 0 ]; then
1220 if [ "$labelfile_barcode" != "$loadedbarcode" ]; then
1224 old_val=$labelfile_barcode
1225 new_val=$loadedbarcode
1226 elif [ "$labelfile_label" != "$tapelabel" ]; then
1228 lf_val=$loadedbarcode
1230 old_val=$labelfile_label
1233 if [ -n "$lf_val" ]; then
1234 LogAppend "ERROR -> !!! Label database corrupted !!!"
1235 LogAppend " -> \"$old_val\" conflicts with" \
1236 "new $val_type \"$new_val\"" \
1237 "for $lf_type \"$lf_val\""
1238 LogAppend " -> Remove $labelfile" \
1240 "\"$sbindir/amtape $config update\""
1243 "$tapelabel: \"$old_val\" conflicts with" \
1244 "new $val_type \"$new_val\"" \
1245 "for $lf_type \"$lf_val\""
1246 return $? # in case we are internal
1248 LogAppend " -> already synced"
1250 echo "$tapelabel $loadedbarcode" >> $labelfile
1251 LogAppend " -> appended $labelfile entry:" \
1252 "$tapelabel $loadedbarcode"
1254 Exit 0 "$loadedslot" "$tape"
1255 return $? # in case we are internal
1259 # Look for a label in the barcode file. If found, locate the slot it's
1260 # in by looking for the barcode in the mtx output, then load that tape.
1264 test -n "$DEBUG" && set -x
1265 if [ $# -lt 1 ]; then
1266 Exit 2 "<none>" "Missing -search argument"
1267 return $? # in case we are internal
1270 if [ $havereader -eq 0 ]; then
1271 Exit 2 "<none>" "Not configured with barcode reader"
1272 return $? # in case we are internal
1274 Log "SEARCH -> Hunting for label \"$tapelabel\""
1275 read_labelfile "$tapelabel" "" < $labelfile
1276 if [ $labelfile_entry_found -eq 0 ]; then
1277 LogAppend " -> !!! label \"$tapelabel\" not found" \
1279 LogAppend " -> Remove $labelfile" \
1281 "\"$sbindir/amtape $config update\""
1284 "$tapelabel: label \"$tapelabel\" not found in $labelfile"
1285 return $? # in case we are internal
1287 LogAppend " -> barcode is \"$labelfile_barcode\""
1290 /VolumeTag *= *'$labelfile_barcode' *$/ {
1291 s/.*Storage Element \([0-9][0-9]*\).*/\1/p
1295 LogAppend " -> foundslot is $foundslot"
1296 if [ -z "$foundslot" ]; then
1297 LogAppend "ERROR -> !!! Could not find slot" \
1298 "for barcode \"$labelfile_barcode\"!!!"
1299 LogAppend " -> Remove $labelfile" \
1301 "\"$sbindir/amtape $config update\""
1304 "barcode \"$labelfile_barcode\"" \
1305 "not found in mtx status output"
1306 return $? # in case we are internal
1308 # Call loadslot without doing it as an internal and let it finish
1312 Exit 2 "<none>" "searchtape: should not get here"
1313 return $? # in case we are internal
1317 # Program invocation begins here
1320 if [ $# -lt 1 ]; then
1321 Exit 2 "<none>" "Usage: $myname -command args"
1348 Exit 2 "<none>" "unknown option: $cmd"
1352 Exit 2 "<none>" "$myname: should not get here"