1 ################################################################################
2 # You may want to customize these values
3 ################################################################################
5 # These are the defaults discovered by configure when Amanda was installed.
6 # They can be overridden here, or by by 'mt_binary' and 'mtx_binary',
7 # respectively, in the changerfile (currently only for chg-zd-mtx.sh and
13 # This is the flag used to specify a device filename to 'mt', usually '-f'
16 ################################################################################
17 # No user-level customization should be required beyond this point.
18 ################################################################################
21 exec_prefix="@exec_prefix@"
23 libexecdir="@libexecdir@"
24 amlibexecdir="@amlibexecdir@"
25 . "${amlibexecdir}/amanda-sh-lib.sh"
28 # Eponymous functions to access various amanda apps
29 # TODO: move to amanda-sh-lib.sh
31 if test "@USE_VERSION_SUFFIXES@" = "yes"; then
33 "${sbindir}/amgetconf-@VERSION@" "${@}"
36 "${sbindir}/amdevcheck-@VERSION@" "${@}"
40 "${sbindir}/amgetconf" "${@}"
43 "${sbindir}/amdevcheck" "${@}"
47 # This function tries to find a useable mt binary. If a fully-qualified path
48 # was provided at configure time or via a config file, we check that it
49 # exists and is executable. If an incomplete path was specified (e.g., "mt"),
50 # we ask the shell to search the path. Returns 0 on success, 1 on failure.
54 if test -n $mt_found; then
62 if "`echo $MT | dd bs=1 count=1`" = "/"; then
63 if ! test -f "${MT}"; then
64 echo `_ "mt binary at '%s' not found" "$MTX"`
67 if ! test -x "${MT}"; then
68 echo `_ "mt binary at '%s' is not executable" "$MTX"`
72 # try running it to see if the shell can find it
73 "$MT" >/dev/null 2>/dev/null
74 if test $? -eq 127 -o $? -eq 126; then
75 echo `_ "Could not run mt binary at '%s'" "$MTX"`
84 # This function strips the tape: from the front of device names.
85 # Capture its output with ``.
86 tape_device_filename() {
87 if echo "$1"|grep '^tape:' >/dev/null; then
88 echo "$1" | sed 's/^tape://'
90 if echo "$1"|grep '^/' >/dev/null; then
96 # Invoke amdevcheck to determine whether the device is ready for use.
98 # @return 0 if a tape is loaded or error
99 # @return 1 if a tape is tape offline or busy
101 # @side-effect: $amdevcheck_message is the contents of all MESSAGE lines from
102 # amdevcheck, suitable for use in higher-level error messages
103 amdevcheck_status() {
105 local amdevcheck_config_dir=`pwd`
106 local amdevcheck_config_name=`basename $amdevcheck_config_dir`
107 local amdevcheck_output=`amdevcheck $amdevcheck_config_name $@`
108 local amdevcheck_status=$?
110 test "$amdevcheck_status" -ne 0 && return 0
112 # extract any messages
113 amdevcheck_message=`echo "$amdevcheck_output" | sed '/^MESSAGE /{s/^MESSAGE //;p;}; d'`
115 # Return 1 if it's possible that the device is offline or busy; if the device cannot
116 # distinguish this state from an error condition, then our caller will just have to
118 if echo "$amdevcheck_output" | $EGREP "VOLUME_MISSING|DEVICE_BUSY" > /dev/null; then
125 # This attempts to eject a device using whatever system tools are available.
126 # At the moment, that means mt for tapes, and nothing otherwise, but might
127 # be extended at some later time.
130 if echo "$1" | grep '^tape:' > /dev/null; then
131 try_eject_device_tape="`echo \"$1\" | cut -b6-`"
132 elif echo "$1" | grep -v : > /dev/null; then
133 try_eject_device_tape="$1"
135 try_eject_device_tape=
138 if test -n "$try_eject_device_tape"; then
140 $MT $MTF "$try_eject_device_tape" offline
143 # Technically we failed to eject the device, but we presume that's
144 # because it doesn't require ejection.