3 This page contains Bdale's notes about each unit of [TeleMetrum](..)
8 Full load of v0.1 PCB, two cuts and jumps to rewire P1_2 to be SPI memory
9 chip select, R14 and R15 loaded with 56k, 10k tacked from each to
10 ground. R17 replaced with short circuit, R18 removed.
12 Installed in Bdale's Vertical Assault. First unit to be flown on
13 19 April 2009, on a Cesaroni J335.
17 Full load of v0.1 PCB, two cuts and jumps to rewire P1_2 to be SPI memory
18 chip select, R14 and R15 loaded with 56k, 10k tacked from each to
21 Delivered to Keith Packard for firmware development and use. Flown twice
22 on 10 May 2008 in Keith's Grappler to about 45m on Estes D12-3 motors.
26 Full load of v0.1 PCB on 2009.04.22, two cuts and jumps to rewire P1_2
27 to be SPI memory chip select, R14 and R15 loaded with 100k, 27k tacked
30 Installed in Bdale's Horizon rebuild.
34 Full load of v0.1 PCB on 2009.04.22, two cuts and jumps to rewire P1_2
35 to be SPI memory chip select, R14 and R15 loaded with 100k, 27k tacked
38 Installed in Robert's Lil Nuke.
42 Partial "ground" load of v0.1 PCB on 2009.04.23 plus beeper and serial
43 connector for use as TeleDongle or for TeleTerra prototype.
47 Partial "ground" load of v0.1 PCB on 2009.04.23 for use as TeleDongle.
49 Delivered to Keith Packard for firmware development and use.