1 # Makefile.in generated by automake 1.11 from Makefile.am.
4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
7 # This Makefile.in is free software; the Free Software Foundation
8 # gives unlimited permission to copy and/or distribute it,
9 # with or without modifications, as long as this notice is preserved.
11 # This program is distributed in the hope that it will be useful,
12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
19 # Copyright (c) 2005-2008 Zmanda Inc. All Rights Reserved.
21 # This library is free software; you can redistribute it and/or modify it
22 # under the terms of the GNU Lesser General Public License version 2.1 as
23 # published by the Free Software Foundation.
25 # This library is distributed in the hope that it will be useful, but
26 # WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
27 # or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public
28 # License for more details.
30 # You should have received a copy of the GNU Lesser General Public License
31 # along with this library; if not, write to the Free Software Foundation,
32 # Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
34 # Contact information: Zmanda Inc., 465 S Mathlida Ave, Suite 300
35 # Sunnyvale, CA 94086, USA, or: http://www.zmanda.com
37 # simple include file to pre-define variables which are then +='d by other
38 # scripts in this directory.
42 # Adjust post-install permissions settings. This rule works off two
43 # specially-formatted variables, INSTALLPERMS_exec and INSTALLPERMS_data.
44 # Each is a whitespace-separated list of commands, all of which are either
45 # a variable assignment or a filename. Three variables are available:
47 # - dest= sets the destination directory to e.g., $(sbindir)
48 # - chown= controls changes in ownership; value is first argument to chown
49 # - chmod= controls changes in permissions; value is first argument to chmod
51 # As a special case, chown=amanda is taken as equivalent to
52 # chown=$(BINARY_OWNER):$(SETUID_GROUP), which may otherwise have problems with
53 # whitespace in the user/group names.
55 # when a filename is seen, the currently active variables are applied.
57 # Note that scripts are data, not executables!
61 # sbin_PROGRAMS = foo bar bing
62 # libexec_PROGRAMS = pro gram
63 # sbin_SCRIPTS = sk ript
64 # INSTALLPERMS_exec = \
65 # dest=$(sbindir) chown=amanda chmod= \
69 # dest=$(libexecdir) chmod= \
71 # INSTALLPERMS_data = \
72 # dest=$(sbindir) chown=amanda chmod= \
75 # This whole operation is not required when making builds for packaging,
76 # and can be disabled with --disable-installperms, via the WANT_INSTALLPERMS
77 # AM_CONDITIONAL. When disabled, the file 'installperms.sh' in the top-level
78 # build directory is populated with a format suitable for shell interpretation,
79 # with lines like this:
80 # installperm "amanda:disk" "04750" "/usr/local/sbin/bing"
81 # the arguments being, respectively, owner:group, mode, and filename. There will
82 # be exactly one line for each file which has specific permissions. The intention
83 # is that this file be used by packaging scripts to set correct permissions at install
84 # time. Note that files which have no special permissions requirements do not appear
85 # in this file at all, due to limitations of Automake.
88 pkgdatadir = $(datadir)/@PACKAGE@
89 pkgincludedir = $(includedir)/@PACKAGE@
90 pkglibdir = $(libdir)/@PACKAGE@
91 pkglibexecdir = $(libexecdir)/@PACKAGE@
92 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
93 install_sh_DATA = $(install_sh) -c -m 644
94 install_sh_PROGRAM = $(install_sh) -c
95 install_sh_SCRIPT = $(install_sh) -c
96 INSTALL_HEADER = $(INSTALL_DATA)
97 transform = $(program_transform_name)
104 build_triplet = @build@
105 host_triplet = @host@
106 target_triplet = @target@
107 DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
108 $(srcdir)/Makefile.in \
109 $(top_srcdir)/config/automake/installperms.am \
110 $(top_srcdir)/config/automake/vars.am $(top_srcdir)/configure \
111 $(top_srcdir)/example/template.d/advanced.conf.in \
112 $(top_srcdir)/example/template.d/amanda-S3.conf.in \
113 $(top_srcdir)/example/template.d/amanda-harddisk.conf.in \
114 $(top_srcdir)/example/template.d/amanda-single-tape.conf.in \
115 $(top_srcdir)/example/template.d/amanda-tape-changer.conf.in \
116 AUTHORS ChangeLog INSTALL NEWS
117 @WANT_INSTALLPERMS_FALSE@am__append_1 = $(installperms_sh)
119 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
120 am__aclocal_m4_deps = \
121 $(top_srcdir)/config/macro-archive/ac_define_dir.m4 \
122 $(top_srcdir)/config/macro-archive/ac_perl_module_version.m4 \
123 $(top_srcdir)/config/macro-archive/ac_prog_perl_version.m4 \
124 $(top_srcdir)/config/macro-archive/ac_prog_swig.m4 \
125 $(top_srcdir)/config/macro-archive/ax_compare_version.m4 \
126 $(top_srcdir)/config/macro-archive/docbook-dtd.m4 \
127 $(top_srcdir)/config/macro-archive/docbook-xslt-min.m4 \
128 $(top_srcdir)/config/macro-archive/docbook-xslt.m4 \
129 $(top_srcdir)/config/macro-archive/xsltproc.m4 \
130 $(top_srcdir)/config/amanda/amplot.m4 \
131 $(top_srcdir)/config/amanda/bsd-security.m4 \
132 $(top_srcdir)/config/amanda/bsdtcp-security.m4 \
133 $(top_srcdir)/config/amanda/bsdudp-security.m4 \
134 $(top_srcdir)/config/amanda/changer.m4 \
135 $(top_srcdir)/config/amanda/components.m4 \
136 $(top_srcdir)/config/amanda/compress.m4 \
137 $(top_srcdir)/config/amanda/config.m4 \
138 $(top_srcdir)/config/amanda/debugging.m4 \
139 $(top_srcdir)/config/amanda/defaults.m4 \
140 $(top_srcdir)/config/amanda/devprefix.m4 \
141 $(top_srcdir)/config/amanda/dirs.m4 \
142 $(top_srcdir)/config/amanda/documentation.m4 \
143 $(top_srcdir)/config/amanda/dumpers.m4 \
144 $(top_srcdir)/config/amanda/flags.m4 \
145 $(top_srcdir)/config/amanda/flock.m4 \
146 $(top_srcdir)/config/amanda/funcs.m4 \
147 $(top_srcdir)/config/amanda/getfsent.m4 \
148 $(top_srcdir)/config/amanda/i18n.m4 \
149 $(top_srcdir)/config/amanda/ipv6.m4 \
150 $(top_srcdir)/config/amanda/krb4-security.m4 \
151 $(top_srcdir)/config/amanda/krb5-security.m4 \
152 $(top_srcdir)/config/amanda/lfs.m4 \
153 $(top_srcdir)/config/amanda/libs.m4 \
154 $(top_srcdir)/config/amanda/net.m4 \
155 $(top_srcdir)/config/amanda/progs.m4 \
156 $(top_srcdir)/config/amanda/ps.m4 \
157 $(top_srcdir)/config/amanda/readdir.m4 \
158 $(top_srcdir)/config/amanda/readline.m4 \
159 $(top_srcdir)/config/amanda/rsh-security.m4 \
160 $(top_srcdir)/config/amanda/s3-device.m4 \
161 $(top_srcdir)/config/amanda/shmem.m4 \
162 $(top_srcdir)/config/amanda/socklen_t_equiv.m4 \
163 $(top_srcdir)/config/amanda/ssh-security.m4 \
164 $(top_srcdir)/config/amanda/summary.m4 \
165 $(top_srcdir)/config/amanda/swig.m4 \
166 $(top_srcdir)/config/amanda/syshacks.m4 \
167 $(top_srcdir)/config/amanda/tape.m4 \
168 $(top_srcdir)/config/amanda/types.m4 \
169 $(top_srcdir)/config/amanda/userid.m4 \
170 $(top_srcdir)/config/amanda/version.m4 \
171 $(top_srcdir)/config/gnulib/alloca.m4 \
172 $(top_srcdir)/config/gnulib/arpa_inet_h.m4 \
173 $(top_srcdir)/config/gnulib/base64.m4 \
174 $(top_srcdir)/config/gnulib/eoverflow.m4 \
175 $(top_srcdir)/config/gnulib/extensions.m4 \
176 $(top_srcdir)/config/gnulib/float_h.m4 \
177 $(top_srcdir)/config/gnulib/fsusage.m4 \
178 $(top_srcdir)/config/gnulib/getaddrinfo.m4 \
179 $(top_srcdir)/config/gnulib/getopt.m4 \
180 $(top_srcdir)/config/gnulib/gettimeofday.m4 \
181 $(top_srcdir)/config/gnulib/gnulib-common.m4 \
182 $(top_srcdir)/config/gnulib/gnulib-comp.m4 \
183 $(top_srcdir)/config/gnulib/include_next.m4 \
184 $(top_srcdir)/config/gnulib/inet_ntop.m4 \
185 $(top_srcdir)/config/gnulib/intmax_t.m4 \
186 $(top_srcdir)/config/gnulib/lock.m4 \
187 $(top_srcdir)/config/gnulib/longlong.m4 \
188 $(top_srcdir)/config/gnulib/malloc.m4 \
189 $(top_srcdir)/config/gnulib/mkdtemp.m4 \
190 $(top_srcdir)/config/gnulib/netinet_in_h.m4 \
191 $(top_srcdir)/config/gnulib/onceonly_2_57.m4 \
192 $(top_srcdir)/config/gnulib/physmem.m4 \
193 $(top_srcdir)/config/gnulib/safe-read.m4 \
194 $(top_srcdir)/config/gnulib/safe-write.m4 \
195 $(top_srcdir)/config/gnulib/snprintf.m4 \
196 $(top_srcdir)/config/gnulib/socklen.m4 \
197 $(top_srcdir)/config/gnulib/sockpfaf.m4 \
198 $(top_srcdir)/config/gnulib/ssize_t.m4 \
199 $(top_srcdir)/config/gnulib/stdbool.m4 \
200 $(top_srcdir)/config/gnulib/stdint.m4 \
201 $(top_srcdir)/config/gnulib/stdio_h.m4 \
202 $(top_srcdir)/config/gnulib/stdlib_h.m4 \
203 $(top_srcdir)/config/gnulib/strdup.m4 \
204 $(top_srcdir)/config/gnulib/string_h.m4 \
205 $(top_srcdir)/config/gnulib/sys_socket_h.m4 \
206 $(top_srcdir)/config/gnulib/sys_stat_h.m4 \
207 $(top_srcdir)/config/gnulib/sys_time_h.m4 \
208 $(top_srcdir)/config/gnulib/tempname.m4 \
209 $(top_srcdir)/config/gnulib/unistd_h.m4 \
210 $(top_srcdir)/config/gnulib/vasnprintf.m4 \
211 $(top_srcdir)/config/gnulib/visibility.m4 \
212 $(top_srcdir)/config/gnulib/wchar.m4 \
213 $(top_srcdir)/config/gettext-macros/gettext.m4 \
214 $(top_srcdir)/config/gettext-macros/iconv.m4 \
215 $(top_srcdir)/config/gettext-macros/inttypes_h.m4 \
216 $(top_srcdir)/config/gettext-macros/lib-ld.m4 \
217 $(top_srcdir)/config/gettext-macros/lib-link.m4 \
218 $(top_srcdir)/config/gettext-macros/lib-prefix.m4 \
219 $(top_srcdir)/config/gettext-macros/nls.m4 \
220 $(top_srcdir)/config/gettext-macros/po.m4 \
221 $(top_srcdir)/config/gettext-macros/progtest.m4 \
222 $(top_srcdir)/config/gettext-macros/size_max.m4 \
223 $(top_srcdir)/config/gettext-macros/stdint_h.m4 \
224 $(top_srcdir)/config/gettext-macros/wchar_t.m4 \
225 $(top_srcdir)/config/gettext-macros/wint_t.m4 \
226 $(top_srcdir)/config/gettext-macros/xsize.m4 \
227 $(top_srcdir)/config/libtool.m4 $(top_srcdir)/configure.in
228 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
230 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
231 configure.lineno config.status.lineno
232 mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
233 CONFIG_HEADER = $(top_builddir)/config/config.h
234 CONFIG_CLEAN_FILES = example/template.d/advanced.conf \
235 example/template.d/amanda-S3.conf \
236 example/template.d/amanda-harddisk.conf \
237 example/template.d/amanda-single-tape.conf \
238 example/template.d/amanda-tape-changer.conf
239 CONFIG_CLEAN_VPATH_FILES =
242 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
243 html-recursive info-recursive install-data-recursive \
244 install-dvi-recursive install-exec-recursive \
245 install-html-recursive install-info-recursive \
246 install-pdf-recursive install-ps-recursive install-recursive \
247 installcheck-recursive installdirs-recursive pdf-recursive \
248 ps-recursive uninstall-recursive
249 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
250 am__vpath_adj = case $$p in \
251 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
254 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
256 am__nobase_strip_setup = \
257 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
259 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
260 am__nobase_list = $(am__nobase_strip_setup); \
261 for p in $$list; do echo "$$p $$p"; done | \
262 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
263 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
264 if (++n[$$2] == $(am__install_max)) \
265 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
266 END { for (dir in files) print dir, files[dir] }'
268 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
269 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
270 am__installdirs = "$(DESTDIR)$(pkgdatadir)"
271 DATA = $(pkgdata_DATA)
272 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
273 distclean-recursive maintainer-clean-recursive
274 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
275 $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
276 distdir dist dist-all distcheck
279 DIST_SUBDIRS = . gnulib config common-src amar-src amandad-src \
280 client-src application-src device-src server-src changer-src \
281 xfer-src restore-src recover-src oldrecover-src amplot perl po \
282 man example packaging installcheck
283 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
284 distdir = $(PACKAGE)-$(VERSION)
285 top_distdir = $(distdir)
286 am__remove_distdir = \
287 { test ! -d "$(distdir)" \
288 || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
289 && rm -fr "$(distdir)"; }; }
292 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
293 sed_rest='s,^[^/]*/*,,'; \
294 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
295 sed_butlast='s,/*[^/]*$$,,'; \
296 while test -n "$$dir1"; do \
297 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
298 if test "$$first" != "."; then \
299 if test "$$first" = ".."; then \
300 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
301 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
303 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
304 if test "$$first2" = "$$first"; then \
305 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
309 dir0="$$dir0"/"$$first"; \
312 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
315 DIST_ARCHIVES = $(distdir).tar.gz
317 distuninstallcheck_listfiles = find . -type f -print
318 distcleancheck_listfiles = find . -type f -print
320 AIX_BACKUP = @AIX_BACKUP@
322 ALLOCA_H = @ALLOCA_H@
323 AMANDA_DBGDIR = @AMANDA_DBGDIR@
324 AMANDA_DEBUG_DAYS = @AMANDA_DEBUG_DAYS@
325 AMANDA_STATIC_LDFLAGS = @AMANDA_STATIC_LDFLAGS@
326 AMANDA_TMPDIR = @AMANDA_TMPDIR@
327 AMANDA_WARNING_CFLAGS = @AMANDA_WARNING_CFLAGS@
329 AMLINTFLAGS = @AMLINTFLAGS@
330 AMPLOT_CAT_COMPRESS = @AMPLOT_CAT_COMPRESS@
331 AMPLOT_CAT_GZIP = @AMPLOT_CAT_GZIP@
332 AMPLOT_CAT_PACK = @AMPLOT_CAT_PACK@
333 AMPLOT_COMPRESS = @AMPLOT_COMPRESS@
335 APPLICATION_DIR = @APPLICATION_DIR@
337 ARPA_INET_H = @ARPA_INET_H@
338 ASSERTIONS = @ASSERTIONS@
339 AUTOCONF = @AUTOCONF@
340 AUTOHEADER = @AUTOHEADER@
341 AUTOMAKE = @AUTOMAKE@
344 BINARY_OWNER = @BINARY_OWNER@
345 BITSIZEOF_PTRDIFF_T = @BITSIZEOF_PTRDIFF_T@
346 BITSIZEOF_SIG_ATOMIC_T = @BITSIZEOF_SIG_ATOMIC_T@
347 BITSIZEOF_SIZE_T = @BITSIZEOF_SIZE_T@
348 BITSIZEOF_WCHAR_T = @BITSIZEOF_WCHAR_T@
349 BITSIZEOF_WINT_T = @BITSIZEOF_WINT_T@
350 BSDTCP_SECURITY = @BSDTCP_SECURITY@
351 BSDUDP_SECURITY = @BSDUDP_SECURITY@
352 BSD_SECURITY = @BSD_SECURITY@
355 CCDEPMODE = @CCDEPMODE@
357 CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
358 CHECK_USERID = @CHECK_USERID@
361 CLIENT_HOST_INSTANCE = @CLIENT_HOST_INSTANCE@
362 CLIENT_HOST_KEY_FILE = @CLIENT_HOST_KEY_FILE@
363 CLIENT_HOST_PRINCIPAL = @CLIENT_HOST_PRINCIPAL@
364 CLIENT_LOGIN = @CLIENT_LOGIN@
365 CLIENT_SCRIPTS_OPT = @CLIENT_SCRIPTS_OPT@
366 COMPRESS = @COMPRESS@
367 COMPRESS_BEST_OPT = @COMPRESS_BEST_OPT@
368 COMPRESS_FAST_OPT = @COMPRESS_FAST_OPT@
369 COMPRESS_PATH = @COMPRESS_PATH@
370 COMPRESS_SUFFIX = @COMPRESS_SUFFIX@
371 CONFIG_CLOBBER_MY_CONFIG = @CONFIG_CLOBBER_MY_CONFIG@
372 CONFIG_DIR = @CONFIG_DIR@
374 CPPFLAGS = @CPPFLAGS@
375 CURL_CONFIG = @CURL_CONFIG@
378 CXXDEPMODE = @CXXDEPMODE@
379 CXXFLAGS = @CXXFLAGS@
380 CYGPATH_W = @CYGPATH_W@
382 DEFAULT_AMANDATES_FILE = @DEFAULT_AMANDATES_FILE@
383 DEFAULT_CHANGER_DEVICE = @DEFAULT_CHANGER_DEVICE@
384 DEFAULT_CONFIG = @DEFAULT_CONFIG@
385 DEFAULT_MAILER = @DEFAULT_MAILER@
386 DEFAULT_SERVER = @DEFAULT_SERVER@
387 DEFAULT_TAPE_DEVICE = @DEFAULT_TAPE_DEVICE@
388 DEFAULT_TAPE_SERVER = @DEFAULT_TAPE_SERVER@
391 DOC_BUILD_DATE = @DOC_BUILD_DATE@
393 DUMP_RETURNS_1 = @DUMP_RETURNS_1@
399 EOVERFLOW = @EOVERFLOW@
400 EXAMPLE_TAPEDEV = @EXAMPLE_TAPEDEV@
406 GETOPT_H = @GETOPT_H@
408 GLIB_CFLAGS = @GLIB_CFLAGS@
409 GLIB_GENMARSHAL = @GLIB_GENMARSHAL@
410 GLIB_LIBS = @GLIB_LIBS@
411 GLIB_MKENUMS = @GLIB_MKENUMS@
413 GMSGFMT_015 = @GMSGFMT_015@
414 GNULIB_CALLOC_POSIX = @GNULIB_CALLOC_POSIX@
415 GNULIB_CHOWN = @GNULIB_CHOWN@
416 GNULIB_DUP2 = @GNULIB_DUP2@
417 GNULIB_ENVIRON = @GNULIB_ENVIRON@
418 GNULIB_FCHDIR = @GNULIB_FCHDIR@
419 GNULIB_FFLUSH = @GNULIB_FFLUSH@
420 GNULIB_FOPEN = @GNULIB_FOPEN@
421 GNULIB_FPRINTF_POSIX = @GNULIB_FPRINTF_POSIX@
422 GNULIB_FREOPEN = @GNULIB_FREOPEN@
423 GNULIB_FSEEK = @GNULIB_FSEEK@
424 GNULIB_FSEEKO = @GNULIB_FSEEKO@
425 GNULIB_FTELL = @GNULIB_FTELL@
426 GNULIB_FTELLO = @GNULIB_FTELLO@
427 GNULIB_FTRUNCATE = @GNULIB_FTRUNCATE@
428 GNULIB_GETCWD = @GNULIB_GETCWD@
429 GNULIB_GETDELIM = @GNULIB_GETDELIM@
430 GNULIB_GETLINE = @GNULIB_GETLINE@
431 GNULIB_GETLOGIN_R = @GNULIB_GETLOGIN_R@
432 GNULIB_GETPAGESIZE = @GNULIB_GETPAGESIZE@
433 GNULIB_GETSUBOPT = @GNULIB_GETSUBOPT@
434 GNULIB_LCHOWN = @GNULIB_LCHOWN@
435 GNULIB_LSEEK = @GNULIB_LSEEK@
436 GNULIB_MALLOC_POSIX = @GNULIB_MALLOC_POSIX@
437 GNULIB_MBSCASECMP = @GNULIB_MBSCASECMP@
438 GNULIB_MBSCASESTR = @GNULIB_MBSCASESTR@
439 GNULIB_MBSCHR = @GNULIB_MBSCHR@
440 GNULIB_MBSCSPN = @GNULIB_MBSCSPN@
441 GNULIB_MBSLEN = @GNULIB_MBSLEN@
442 GNULIB_MBSNCASECMP = @GNULIB_MBSNCASECMP@
443 GNULIB_MBSNLEN = @GNULIB_MBSNLEN@
444 GNULIB_MBSPBRK = @GNULIB_MBSPBRK@
445 GNULIB_MBSPCASECMP = @GNULIB_MBSPCASECMP@
446 GNULIB_MBSRCHR = @GNULIB_MBSRCHR@
447 GNULIB_MBSSEP = @GNULIB_MBSSEP@
448 GNULIB_MBSSPN = @GNULIB_MBSSPN@
449 GNULIB_MBSSTR = @GNULIB_MBSSTR@
450 GNULIB_MBSTOK_R = @GNULIB_MBSTOK_R@
451 GNULIB_MEMMEM = @GNULIB_MEMMEM@
452 GNULIB_MEMPCPY = @GNULIB_MEMPCPY@
453 GNULIB_MEMRCHR = @GNULIB_MEMRCHR@
454 GNULIB_MKDTEMP = @GNULIB_MKDTEMP@
455 GNULIB_MKSTEMP = @GNULIB_MKSTEMP@
456 GNULIB_PRINTF_POSIX = @GNULIB_PRINTF_POSIX@
457 GNULIB_PUTENV = @GNULIB_PUTENV@
458 GNULIB_READLINK = @GNULIB_READLINK@
459 GNULIB_REALLOC_POSIX = @GNULIB_REALLOC_POSIX@
460 GNULIB_SETENV = @GNULIB_SETENV@
461 GNULIB_SLEEP = @GNULIB_SLEEP@
462 GNULIB_SNPRINTF = @GNULIB_SNPRINTF@
463 GNULIB_SPRINTF_POSIX = @GNULIB_SPRINTF_POSIX@
464 GNULIB_STPCPY = @GNULIB_STPCPY@
465 GNULIB_STPNCPY = @GNULIB_STPNCPY@
466 GNULIB_STRCASESTR = @GNULIB_STRCASESTR@
467 GNULIB_STRCHRNUL = @GNULIB_STRCHRNUL@
468 GNULIB_STRDUP = @GNULIB_STRDUP@
469 GNULIB_STRERROR = @GNULIB_STRERROR@
470 GNULIB_STRNDUP = @GNULIB_STRNDUP@
471 GNULIB_STRNLEN = @GNULIB_STRNLEN@
472 GNULIB_STRPBRK = @GNULIB_STRPBRK@
473 GNULIB_STRSEP = @GNULIB_STRSEP@
474 GNULIB_STRSIGNAL = @GNULIB_STRSIGNAL@
475 GNULIB_STRSTR = @GNULIB_STRSTR@
476 GNULIB_STRTOK_R = @GNULIB_STRTOK_R@
477 GNULIB_UNSETENV = @GNULIB_UNSETENV@
478 GNULIB_VASPRINTF = @GNULIB_VASPRINTF@
479 GNULIB_VFPRINTF_POSIX = @GNULIB_VFPRINTF_POSIX@
480 GNULIB_VPRINTF_POSIX = @GNULIB_VPRINTF_POSIX@
481 GNULIB_VSNPRINTF = @GNULIB_VSNPRINTF@
482 GNULIB_VSPRINTF_POSIX = @GNULIB_VSPRINTF_POSIX@
483 GNULIB_WCWIDTH = @GNULIB_WCWIDTH@
486 GNUTAR_LISTED_INCREMENTAL_DIR = @GNUTAR_LISTED_INCREMENTAL_DIR@
487 GOBJECT_QUERY = @GOBJECT_QUERY@
490 HAVE_CALLOC_POSIX = @HAVE_CALLOC_POSIX@
491 HAVE_DECL_ENVIRON = @HAVE_DECL_ENVIRON@
492 HAVE_DECL_GETDELIM = @HAVE_DECL_GETDELIM@
493 HAVE_DECL_GETLINE = @HAVE_DECL_GETLINE@
494 HAVE_DECL_GETLOGIN_R = @HAVE_DECL_GETLOGIN_R@
495 HAVE_DECL_MEMMEM = @HAVE_DECL_MEMMEM@
496 HAVE_DECL_MEMRCHR = @HAVE_DECL_MEMRCHR@
497 HAVE_DECL_MKDIR = @HAVE_DECL_MKDIR@
498 HAVE_DECL_SNPRINTF = @HAVE_DECL_SNPRINTF@
499 HAVE_DECL_STRDUP = @HAVE_DECL_STRDUP@
500 HAVE_DECL_STRERROR = @HAVE_DECL_STRERROR@
501 HAVE_DECL_STRNDUP = @HAVE_DECL_STRNDUP@
502 HAVE_DECL_STRNLEN = @HAVE_DECL_STRNLEN@
503 HAVE_DECL_STRSIGNAL = @HAVE_DECL_STRSIGNAL@
504 HAVE_DECL_STRTOK_R = @HAVE_DECL_STRTOK_R@
505 HAVE_DECL_VSNPRINTF = @HAVE_DECL_VSNPRINTF@
506 HAVE_DECL_WCWIDTH = @HAVE_DECL_WCWIDTH@
507 HAVE_DUP2 = @HAVE_DUP2@
508 HAVE_FSEEKO = @HAVE_FSEEKO@
509 HAVE_FTELLO = @HAVE_FTELLO@
510 HAVE_FTRUNCATE = @HAVE_FTRUNCATE@
511 HAVE_GETPAGESIZE = @HAVE_GETPAGESIZE@
512 HAVE_GETSUBOPT = @HAVE_GETSUBOPT@
513 HAVE_GZIP = @HAVE_GZIP@
514 HAVE_INTTYPES_H = @HAVE_INTTYPES_H@
515 HAVE_IO_H = @HAVE_IO_H@
516 HAVE_LONG_LONG_INT = @HAVE_LONG_LONG_INT@
517 HAVE_LSTAT = @HAVE_LSTAT@
518 HAVE_MALLOC_POSIX = @HAVE_MALLOC_POSIX@
519 HAVE_MEMPCPY = @HAVE_MEMPCPY@
520 HAVE_MKDTEMP = @HAVE_MKDTEMP@
521 HAVE_NETINET_IN_H = @HAVE_NETINET_IN_H@
522 HAVE_OS_H = @HAVE_OS_H@
523 HAVE_READLINK = @HAVE_READLINK@
524 HAVE_REALLOC_POSIX = @HAVE_REALLOC_POSIX@
525 HAVE_SETENV = @HAVE_SETENV@
526 HAVE_SIGNED_SIG_ATOMIC_T = @HAVE_SIGNED_SIG_ATOMIC_T@
527 HAVE_SIGNED_WCHAR_T = @HAVE_SIGNED_WCHAR_T@
528 HAVE_SIGNED_WINT_T = @HAVE_SIGNED_WINT_T@
529 HAVE_SLEEP = @HAVE_SLEEP@
530 HAVE_STDINT_H = @HAVE_STDINT_H@
531 HAVE_STPCPY = @HAVE_STPCPY@
532 HAVE_STPNCPY = @HAVE_STPNCPY@
533 HAVE_STRCASESTR = @HAVE_STRCASESTR@
534 HAVE_STRCHRNUL = @HAVE_STRCHRNUL@
535 HAVE_STRNDUP = @HAVE_STRNDUP@
536 HAVE_STRPBRK = @HAVE_STRPBRK@
537 HAVE_STRSEP = @HAVE_STRSEP@
538 HAVE_STRUCT_TIMEVAL = @HAVE_STRUCT_TIMEVAL@
539 HAVE_SYS_BITYPES_H = @HAVE_SYS_BITYPES_H@
540 HAVE_SYS_INTTYPES_H = @HAVE_SYS_INTTYPES_H@
541 HAVE_SYS_PARAM_H = @HAVE_SYS_PARAM_H@
542 HAVE_SYS_SOCKET_H = @HAVE_SYS_SOCKET_H@
543 HAVE_SYS_TIME_H = @HAVE_SYS_TIME_H@
544 HAVE_SYS_TYPES_H = @HAVE_SYS_TYPES_H@
545 HAVE_UNISTD_H = @HAVE_UNISTD_H@
546 HAVE_UNSETENV = @HAVE_UNSETENV@
547 HAVE_UNSIGNED_LONG_LONG_INT = @HAVE_UNSIGNED_LONG_LONG_INT@
548 HAVE_VASPRINTF = @HAVE_VASPRINTF@
549 HAVE_VISIBILITY = @HAVE_VISIBILITY@
550 HAVE_WCHAR_H = @HAVE_WCHAR_H@
551 HAVE_WINSOCK2_H = @HAVE_WINSOCK2_H@
552 HAVE_WS2TCPIP_H = @HAVE_WS2TCPIP_H@
553 HAVE__BOOL = @HAVE__BOOL@
554 INCLUDE_NEXT = @INCLUDE_NEXT@
556 INSTALL_DATA = @INSTALL_DATA@
557 INSTALL_PROGRAM = @INSTALL_PROGRAM@
558 INSTALL_SCRIPT = @INSTALL_SCRIPT@
559 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
560 INTLLIBS = @INTLLIBS@
561 INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
562 KRB4_SECURITY = @KRB4_SECURITY@
563 KRB5_SECURITY = @KRB5_SECURITY@
567 LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
569 LIBCURL_CPPFLAGS = @LIBCURL_CPPFLAGS@
570 LIBICONV = @LIBICONV@
572 LIBMULTITHREAD = @LIBMULTITHREAD@
576 LIBTHREAD = @LIBTHREAD@
578 LIBTOOL_DEPS = @LIBTOOL_DEPS@
581 LOW_TCPPORTRANGE = @LOW_TCPPORTRANGE@
582 LTLIBICONV = @LTLIBICONV@
583 LTLIBINTL = @LTLIBINTL@
584 LTLIBMULTITHREAD = @LTLIBMULTITHREAD@
585 LTLIBOBJS = @LTLIBOBJS@
586 LTLIBPTH = @LTLIBPTH@
587 LTLIBTHREAD = @LTLIBTHREAD@
589 MAKEINFO = @MAKEINFO@
593 MSGFMT_015 = @MSGFMT_015@
594 MSGMERGE = @MSGMERGE@
597 MT_FILE_FLAG = @MT_FILE_FLAG@
598 NETINET_IN_H = @NETINET_IN_H@
599 NEXT_FLOAT_H = @NEXT_FLOAT_H@
600 NEXT_NETINET_IN_H = @NEXT_NETINET_IN_H@
601 NEXT_STDINT_H = @NEXT_STDINT_H@
602 NEXT_STDIO_H = @NEXT_STDIO_H@
603 NEXT_STDLIB_H = @NEXT_STDLIB_H@
604 NEXT_STRING_H = @NEXT_STRING_H@
605 NEXT_SYS_SOCKET_H = @NEXT_SYS_SOCKET_H@
606 NEXT_SYS_STAT_H = @NEXT_SYS_STAT_H@
607 NEXT_SYS_TIME_H = @NEXT_SYS_TIME_H@
608 NEXT_UNISTD_H = @NEXT_UNISTD_H@
609 NEXT_WCHAR_H = @NEXT_WCHAR_H@
612 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
613 PACKAGE_NAME = @PACKAGE_NAME@
614 PACKAGE_STRING = @PACKAGE_STRING@
615 PACKAGE_TARNAME = @PACKAGE_TARNAME@
616 PACKAGE_VERSION = @PACKAGE_VERSION@
617 PATH_SEPARATOR = @PATH_SEPARATOR@
620 PERLEXTLIBS = @PERLEXTLIBS@
621 PERL_INC = @PERL_INC@
622 PKG_CONFIG = @PKG_CONFIG@
626 PS_ARGUMENT = @PS_ARGUMENT@
627 PTRDIFF_T_SUFFIX = @PTRDIFF_T_SUFFIX@
629 READLINE_LIBS = @READLINE_LIBS@
630 REPLACE_CHOWN = @REPLACE_CHOWN@
631 REPLACE_FCHDIR = @REPLACE_FCHDIR@
632 REPLACE_FFLUSH = @REPLACE_FFLUSH@
633 REPLACE_FOPEN = @REPLACE_FOPEN@
634 REPLACE_FPRINTF = @REPLACE_FPRINTF@
635 REPLACE_FREOPEN = @REPLACE_FREOPEN@
636 REPLACE_FSEEK = @REPLACE_FSEEK@
637 REPLACE_FSEEKO = @REPLACE_FSEEKO@
638 REPLACE_FTELL = @REPLACE_FTELL@
639 REPLACE_FTELLO = @REPLACE_FTELLO@
640 REPLACE_GETCWD = @REPLACE_GETCWD@
641 REPLACE_GETLINE = @REPLACE_GETLINE@
642 REPLACE_GETPAGESIZE = @REPLACE_GETPAGESIZE@
643 REPLACE_GETTIMEOFDAY = @REPLACE_GETTIMEOFDAY@
644 REPLACE_LCHOWN = @REPLACE_LCHOWN@
645 REPLACE_LSEEK = @REPLACE_LSEEK@
646 REPLACE_MEMMEM = @REPLACE_MEMMEM@
647 REPLACE_MKSTEMP = @REPLACE_MKSTEMP@
648 REPLACE_PRINTF = @REPLACE_PRINTF@
649 REPLACE_PUTENV = @REPLACE_PUTENV@
650 REPLACE_SNPRINTF = @REPLACE_SNPRINTF@
651 REPLACE_SPRINTF = @REPLACE_SPRINTF@
652 REPLACE_STRCASESTR = @REPLACE_STRCASESTR@
653 REPLACE_STRERROR = @REPLACE_STRERROR@
654 REPLACE_STRSIGNAL = @REPLACE_STRSIGNAL@
655 REPLACE_STRSTR = @REPLACE_STRSTR@
656 REPLACE_VASPRINTF = @REPLACE_VASPRINTF@
657 REPLACE_VFPRINTF = @REPLACE_VFPRINTF@
658 REPLACE_VPRINTF = @REPLACE_VPRINTF@
659 REPLACE_VSNPRINTF = @REPLACE_VSNPRINTF@
660 REPLACE_VSPRINTF = @REPLACE_VSPRINTF@
661 REPLACE_WCWIDTH = @REPLACE_WCWIDTH@
663 RSH_SECURITY = @RSH_SECURITY@
664 SAMBA_CLIENT = @SAMBA_CLIENT@
665 SERVER_HOST_INSTANCE = @SERVER_HOST_INSTANCE@
666 SERVER_HOST_KEY_FILE = @SERVER_HOST_KEY_FILE@
667 SERVER_HOST_PRINCIPAL = @SERVER_HOST_PRINCIPAL@
668 SERVICE_SUFFIX = @SERVICE_SUFFIX@
669 SETUID_GROUP = @SETUID_GROUP@
670 SET_MAKE = @SET_MAKE@
672 SIG_ATOMIC_T_SUFFIX = @SIG_ATOMIC_T_SUFFIX@
673 SIZE_T_SUFFIX = @SIZE_T_SUFFIX@
674 SNAPSHOT_STAMP = @SNAPSHOT_STAMP@
677 SSH_SECURITY = @SSH_SECURITY@
678 STDBOOL_H = @STDBOOL_H@
679 STDINT_H = @STDINT_H@
683 SWIG_LIB = @SWIG_LIB@
684 SYS_SOCKET_H = @SYS_SOCKET_H@
685 SYS_STAT_H = @SYS_STAT_H@
686 SYS_TIME_H = @SYS_TIME_H@
687 TCPPORTRANGE = @TCPPORTRANGE@
688 TICKET_LIFETIME = @TICKET_LIFETIME@
689 UDPPORTRANGE = @UDPPORTRANGE@
690 UNCOMPRESS_OPT = @UNCOMPRESS_OPT@
691 UNCOMPRESS_PATH = @UNCOMPRESS_PATH@
692 USE_AMANDAHOSTS = @USE_AMANDAHOSTS@
694 USE_RUNDUMP = @USE_RUNDUMP@
695 USE_VERSION_SUFFIXES = @USE_VERSION_SUFFIXES@
698 VERSION_COMMENT = @VERSION_COMMENT@
699 VERSION_MAJOR = @VERSION_MAJOR@
700 VERSION_MINOR = @VERSION_MINOR@
701 VERSION_PATCH = @VERSION_PATCH@
702 VERSION_SUFFIX = @VERSION_SUFFIX@
703 VOID_UNSETENV = @VOID_UNSETENV@
704 VRESTORE = @VRESTORE@
706 VXRESTORE = @VXRESTORE@
708 WCHAR_T_SUFFIX = @WCHAR_T_SUFFIX@
709 WINT_T_SUFFIX = @WINT_T_SUFFIX@
711 XFSRESTORE = @XFSRESTORE@
712 XGETTEXT = @XGETTEXT@
713 XGETTEXT_015 = @XGETTEXT_015@
715 XSLTPROC = @XSLTPROC@
716 XSLTPROC_FLAGS = @XSLTPROC_FLAGS@
719 _libcurl_config = @_libcurl_config@
720 abs_builddir = @abs_builddir@
721 abs_srcdir = @abs_srcdir@
722 abs_top_builddir = @abs_top_builddir@
723 abs_top_srcdir = @abs_top_srcdir@
724 ac_ct_CC = @ac_ct_CC@
725 ac_ct_CXX = @ac_ct_CXX@
726 ac_ct_F77 = @ac_ct_F77@
727 am__include = @am__include@
728 am__leading_dot = @am__leading_dot@
729 am__quote = @am__quote@
731 am__untar = @am__untar@
732 amdatadir = @amdatadir@
733 amincludedir = @amincludedir@
734 amlibdir = @amlibdir@
735 amlibexecdir = @amlibexecdir@
736 amperldir = @amperldir@
739 build_alias = @build_alias@
740 build_cpu = @build_cpu@
741 build_os = @build_os@
742 build_vendor = @build_vendor@
743 builddir = @builddir@
745 datarootdir = @datarootdir@
748 exec_prefix = @exec_prefix@
749 gl_LIBOBJS = @gl_LIBOBJS@
750 gl_LTLIBOBJS = @gl_LTLIBOBJS@
751 gltests_LIBOBJS = @gltests_LIBOBJS@
752 gltests_LTLIBOBJS = @gltests_LTLIBOBJS@
754 host_alias = @host_alias@
755 host_cpu = @host_cpu@
757 host_vendor = @host_vendor@
759 includedir = @includedir@
761 install_sh = @install_sh@
763 libexecdir = @libexecdir@
764 localedir = @localedir@
765 localstatedir = @localstatedir@
768 oldincludedir = @oldincludedir@
771 program_transform_name = @program_transform_name@
774 sharedstatedir = @sharedstatedir@
776 sysconfdir = @sysconfdir@
778 target_alias = @target_alias@
779 target_cpu = @target_cpu@
780 target_os = @target_os@
781 target_vendor = @target_vendor@
782 top_build_prefix = @top_build_prefix@
783 top_builddir = @top_builddir@
784 top_srcdir = @top_srcdir@
785 AUTOMAKE_OPTIONS = 1.4 foreign
787 EXTRA_DIST = $(SNAPSHOT_STAMP) $(pkgdata_DATA) autogen contrib/README \
788 contrib/dbbackup.README contrib/dbbackup.ksh \
789 contrib/dbbackup.sql contrib/dbbackup.tcl contrib/mkamandisk \
790 contrib/set_prod_link.pl contrib/gsc/README \
791 contrib/gsc/cfggsc.c contrib/gsc/defgsc.c contrib/gsc/gsc.add \
792 contrib/gsc/gscdd.c contrib/gsc/gscdds.h contrib/gsc/makefile \
793 contrib/gsc/tstinq.c contrib/gsc/ucfggsc.c \
794 patches/regex-3.6alpha.patch patches/samba-largefs.patch \
795 patches/tar-1.12.patch UPGRADING DEVELOPING
799 DISTCLEANFILES = $(am__append_1)
800 MAINTAINERCLEANFILES =
802 # sed expression to strip leading directories from a filename; this converts e.g.,
803 # src/foo/bar.so to bar.so.
804 strip_leading_dirs = s|^.*/||
805 @WANT_INSTALLPERMS_FALSE@do_file = pa="$$dest"/`echo "$$cmd"|sed '$(strip_leading_dirs)'|sed '$(transform)'`; \
806 @WANT_INSTALLPERMS_FALSE@ echo "installperm \"$$chown\" \"$$chmod\" \"$$pa\"" >> "$(installperms_sh)"
809 # define a snippet of the scripts below to either perform a chown/chmod operation,
810 # or record that operation in the logfile. On entry to the snippet, $$dest is the
811 # destination directory, $$cmd is the srcdir-relative pathname of the target file,
812 # $$chown is the ownership, and $$chmod is the permission pattern.
813 @WANT_INSTALLPERMS_TRUE@do_file = pa="$(DESTDIR)$$dest"/`echo "$$cmd"|sed '$(strip_leading_dirs)'|sed '$(transform)'`; \
814 @WANT_INSTALLPERMS_TRUE@ if test -n "$$chown"; then \
815 @WANT_INSTALLPERMS_TRUE@ echo chown "$$chown" "$$pa"; \
816 @WANT_INSTALLPERMS_TRUE@ chown "$$chown" "$$pa" || exit 1; \
817 @WANT_INSTALLPERMS_TRUE@ fi; \
818 @WANT_INSTALLPERMS_TRUE@ if test -n "$$chmod"; then \
819 @WANT_INSTALLPERMS_TRUE@ echo chmod "$$chmod" "$$pa"; \
820 @WANT_INSTALLPERMS_TRUE@ chmod "$$chmod" "$$pa" || exit 1; \
821 @WANT_INSTALLPERMS_TRUE@ fi
823 @WANT_INSTALLPERMS_FALSE@installperms_sh = "$(top_builddir)/installperms.sh"
824 ACLOCAL_AMFLAGS = --force -I . -I config -I config/gettext-macros -I config/gnulib -I config/amanda -I config/macro-archive
825 @WANT_CLIENT_TRUE@CLIENT_SUBDIRS = client-src application-src
826 @WANT_SERVER_TRUE@SERVER_SUBDIRS = device-src server-src changer-src xfer-src
827 @WANT_RESTORE_TRUE@RESTORE_SUBDIRS = restore-src
828 @WANT_RECOVER_TRUE@RECOVER_SUBDIRS = recover-src oldrecover-src
829 @WANT_AMPLOT_TRUE@PLOT_SUBDIRS = amplot
830 # order is significant, don't change it arbitrarily
856 CONFIG_STATUS = config.status
858 # ensure that configure gets the right arguments for distcheck; this keeps the
859 # user/group through to the distcheck, rather than defaulting back to 'amanda'.
860 DISTCHECK_CONFIGURE_FLAGS = --with-user=$(CLIENT_LOGIN) --with-group=$(SETUID_GROUP) --with-owner=$(BINARY_OWNER) --disable-installperms --without-amperldir --without-force-uid --with-tmpdir=$(AMANDA_TMPDIR) SINGLE_USERID=yes CLOBBER_MY_CONFIG=OK
861 all: $(BUILT_SOURCES)
862 $(MAKE) $(AM_MAKEFLAGS) all-recursive
868 $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/config/automake/vars.am $(top_srcdir)/config/automake/installperms.am $(am__configure_deps)
870 case '$(am__configure_deps)' in \
872 echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
873 $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
878 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
879 $(am__cd) $(top_srcdir) && \
880 $(AUTOMAKE) --foreign Makefile
882 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
885 echo ' $(SHELL) ./config.status'; \
886 $(SHELL) ./config.status;; \
888 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
889 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
892 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
893 $(SHELL) ./config.status --recheck
895 $(top_srcdir)/configure: $(am__configure_deps)
896 $(am__cd) $(srcdir) && $(AUTOCONF)
897 $(ACLOCAL_M4): $(am__aclocal_m4_deps)
898 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
899 $(am__aclocal_m4_deps):
900 example/template.d/advanced.conf: $(top_builddir)/config.status $(top_srcdir)/example/template.d/advanced.conf.in
901 cd $(top_builddir) && $(SHELL) ./config.status $@
902 example/template.d/amanda-S3.conf: $(top_builddir)/config.status $(top_srcdir)/example/template.d/amanda-S3.conf.in
903 cd $(top_builddir) && $(SHELL) ./config.status $@
904 example/template.d/amanda-harddisk.conf: $(top_builddir)/config.status $(top_srcdir)/example/template.d/amanda-harddisk.conf.in
905 cd $(top_builddir) && $(SHELL) ./config.status $@
906 example/template.d/amanda-single-tape.conf: $(top_builddir)/config.status $(top_srcdir)/example/template.d/amanda-single-tape.conf.in
907 cd $(top_builddir) && $(SHELL) ./config.status $@
908 example/template.d/amanda-tape-changer.conf: $(top_builddir)/config.status $(top_srcdir)/example/template.d/amanda-tape-changer.conf.in
909 cd $(top_builddir) && $(SHELL) ./config.status $@
918 -rm -f libtool config.lt
919 install-pkgdataDATA: $(pkgdata_DATA)
921 test -z "$(pkgdatadir)" || $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)"
922 @list='$(pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
923 for p in $$list; do \
924 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
926 done | $(am__base_list) | \
927 while read files; do \
928 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgdatadir)'"; \
929 $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgdatadir)" || exit $$?; \
932 uninstall-pkgdataDATA:
934 @list='$(pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
935 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
936 test -n "$$files" || exit 0; \
937 echo " ( cd '$(DESTDIR)$(pkgdatadir)' && rm -f" $$files ")"; \
938 cd "$(DESTDIR)$(pkgdatadir)" && rm -f $$files
940 # This directory's subdirectories are mostly independent; you can cd
941 # into them and run `make' without going through this Makefile.
942 # To change the values of `make' variables: instead of editing Makefiles,
943 # (1) if the variable is set in `config.status', edit `config.status'
944 # (which will cause the Makefiles to be regenerated when you run `make');
945 # (2) otherwise, pass the desired values on the `make' command line.
946 $(RECURSIVE_TARGETS):
948 for f in x $$MAKEFLAGS; do \
951 *k*) failcom='fail=yes';; \
955 target=`echo $@ | sed s/-recursive//`; \
956 list='$(SUBDIRS)'; for subdir in $$list; do \
957 echo "Making $$target in $$subdir"; \
958 if test "$$subdir" = "."; then \
960 local_target="$$target-am"; \
962 local_target="$$target"; \
964 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
967 if test "$$dot_seen" = "no"; then \
968 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
971 $(RECURSIVE_CLEAN_TARGETS):
973 for f in x $$MAKEFLAGS; do \
976 *k*) failcom='fail=yes';; \
981 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
982 *) list='$(SUBDIRS)' ;; \
984 rev=''; for subdir in $$list; do \
985 if test "$$subdir" = "."; then :; else \
986 rev="$$subdir $$rev"; \
990 target=`echo $@ | sed s/-recursive//`; \
991 for subdir in $$rev; do \
992 echo "Making $$target in $$subdir"; \
993 if test "$$subdir" = "."; then \
994 local_target="$$target-am"; \
996 local_target="$$target"; \
998 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
1000 done && test -z "$$fail"
1002 list='$(SUBDIRS)'; for subdir in $$list; do \
1003 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
1006 list='$(SUBDIRS)'; for subdir in $$list; do \
1007 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
1010 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
1011 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
1012 unique=`for i in $$list; do \
1013 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
1015 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
1016 END { if (nonempty) { for (i in files) print i; }; }'`; \
1020 TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
1021 $(TAGS_FILES) $(LISP)
1024 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
1025 include_option=--etags-include; \
1028 include_option=--include; \
1031 list='$(SUBDIRS)'; for subdir in $$list; do \
1032 if test "$$subdir" = .; then :; else \
1033 test ! -f $$subdir/TAGS || \
1034 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
1037 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
1038 unique=`for i in $$list; do \
1039 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
1041 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
1042 END { if (nonempty) { for (i in files) print i; }; }'`; \
1044 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
1045 test -n "$$unique" || unique=$$empty_fix; \
1046 if test $$# -gt 0; then \
1047 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
1050 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
1055 CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
1056 $(TAGS_FILES) $(LISP)
1057 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
1058 unique=`for i in $$list; do \
1059 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
1061 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
1062 END { if (nonempty) { for (i in files) print i; }; }'`; \
1063 test -z "$(CTAGS_ARGS)$$unique" \
1064 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
1068 here=`$(am__cd) $(top_builddir) && pwd` \
1069 && $(am__cd) $(top_srcdir) \
1070 && gtags -i $(GTAGS_ARGS) "$$here"
1073 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
1075 distdir: $(DISTFILES)
1076 $(am__remove_distdir)
1077 test -d "$(distdir)" || mkdir "$(distdir)"
1078 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
1079 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
1080 list='$(DISTFILES)'; \
1081 dist_files=`for file in $$list; do echo $$file; done | \
1082 sed -e "s|^$$srcdirstrip/||;t" \
1083 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
1084 case $$dist_files in \
1085 */*) $(MKDIR_P) `echo "$$dist_files" | \
1086 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
1089 for file in $$dist_files; do \
1090 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
1091 if test -d $$d/$$file; then \
1092 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
1093 if test -d "$(distdir)/$$file"; then \
1094 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
1096 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
1097 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
1098 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
1100 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
1102 test -f "$(distdir)/$$file" \
1103 || cp -p $$d/$$file "$(distdir)/$$file" \
1107 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
1108 if test "$$subdir" = .; then :; else \
1109 test -d "$(distdir)/$$subdir" \
1110 || $(MKDIR_P) "$(distdir)/$$subdir" \
1114 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
1115 if test "$$subdir" = .; then :; else \
1116 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
1117 $(am__relativize); \
1118 new_distdir=$$reldir; \
1119 dir1=$$subdir; dir2="$(top_distdir)"; \
1120 $(am__relativize); \
1121 new_top_distdir=$$reldir; \
1122 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
1123 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
1124 ($(am__cd) $$subdir && \
1125 $(MAKE) $(AM_MAKEFLAGS) \
1126 top_distdir="$$new_top_distdir" \
1127 distdir="$$new_distdir" \
1128 am__remove_distdir=: \
1129 am__skip_length_check=: \
1130 am__skip_mode_fix=: \
1135 $(MAKE) $(AM_MAKEFLAGS) \
1136 top_distdir="$(top_distdir)" distdir="$(distdir)" \
1138 -test -n "$(am__skip_mode_fix)" \
1139 || find "$(distdir)" -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
1140 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
1141 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
1142 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
1143 || chmod -R a+r "$(distdir)"
1145 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
1146 $(am__remove_distdir)
1149 tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
1150 $(am__remove_distdir)
1153 tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
1154 $(am__remove_distdir)
1157 tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
1158 $(am__remove_distdir)
1161 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
1162 $(am__remove_distdir)
1165 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
1166 $(am__remove_distdir)
1169 -rm -f $(distdir).zip
1170 zip -rq $(distdir).zip $(distdir)
1171 $(am__remove_distdir)
1173 dist dist-all: distdir
1174 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
1175 $(am__remove_distdir)
1177 # This target untars the dist file and tries a VPATH configuration. Then
1178 # it guarantees that the distribution is self-contained by making another
1181 case '$(DIST_ARCHIVES)' in \
1183 GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
1185 bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
1187 unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
1189 xz -dc $(distdir).tar.xz | $(am__untar) ;;\
1191 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
1193 GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
1195 unzip $(distdir).zip ;;\
1197 chmod -R a-w $(distdir); chmod a+w $(distdir)
1198 mkdir $(distdir)/_build
1199 mkdir $(distdir)/_inst
1200 chmod a-w $(distdir)
1201 test -d $(distdir)/_build || exit 0; \
1202 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
1203 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
1205 && $(am__cd) $(distdir)/_build \
1206 && ../configure --srcdir=.. --prefix="$$dc_install_base" \
1207 $(DISTCHECK_CONFIGURE_FLAGS) \
1208 && $(MAKE) $(AM_MAKEFLAGS) \
1209 && $(MAKE) $(AM_MAKEFLAGS) dvi \
1210 && $(MAKE) $(AM_MAKEFLAGS) check \
1211 && $(MAKE) $(AM_MAKEFLAGS) install \
1212 && $(MAKE) $(AM_MAKEFLAGS) installcheck \
1213 && $(MAKE) $(AM_MAKEFLAGS) uninstall \
1214 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
1215 distuninstallcheck \
1216 && chmod -R a-w "$$dc_install_base" \
1218 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
1219 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
1220 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
1221 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
1222 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
1223 } || { rm -rf "$$dc_destdir"; exit 1; }) \
1224 && rm -rf "$$dc_destdir" \
1225 && $(MAKE) $(AM_MAKEFLAGS) dist \
1226 && rm -rf $(DIST_ARCHIVES) \
1227 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
1230 $(am__remove_distdir)
1231 @(echo "$(distdir) archives ready for distribution: "; \
1232 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
1233 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
1235 @$(am__cd) '$(distuninstallcheck_dir)' \
1236 && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
1237 || { echo "ERROR: files left after uninstall:" ; \
1238 if test -n "$(DESTDIR)"; then \
1239 echo " (check DESTDIR support)"; \
1241 $(distuninstallcheck_listfiles) ; \
1243 distcleancheck: distclean
1244 @if test '$(srcdir)' = . ; then \
1245 echo "ERROR: distcleancheck can only run from a VPATH build" ; \
1248 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
1249 || { echo "ERROR: files left in build directory after distclean:" ; \
1250 $(distcleancheck_listfiles) ; \
1253 check: $(BUILT_SOURCES)
1254 $(MAKE) $(AM_MAKEFLAGS) check-recursive
1255 all-am: Makefile $(DATA)
1256 installdirs: installdirs-recursive
1258 for dir in "$(DESTDIR)$(pkgdatadir)"; do \
1259 test -z "$$dir" || $(MKDIR_P) "$$dir"; \
1261 install: $(BUILT_SOURCES)
1262 $(MAKE) $(AM_MAKEFLAGS) install-recursive
1263 install-exec: install-exec-recursive
1264 install-data: install-data-recursive
1265 uninstall: uninstall-recursive
1268 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
1270 installcheck: installcheck-recursive
1272 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
1273 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
1274 `test -z '$(STRIP)' || \
1275 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
1276 mostlyclean-generic:
1277 -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
1280 -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
1283 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
1284 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
1285 -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
1287 maintainer-clean-generic:
1288 @echo "This command is intended for maintainers to use"
1289 @echo "it deletes files that may require special tools to rebuild."
1290 -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
1291 -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
1292 clean: clean-recursive
1294 clean-am: clean-generic clean-libtool mostlyclean-am
1296 distclean: distclean-recursive
1297 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
1299 distclean-am: clean-am distclean-generic distclean-libtool \
1306 html: html-recursive
1310 info: info-recursive
1314 install-data-am: install-data-local install-pkgdataDATA
1316 $(MAKE) $(AM_MAKEFLAGS) install-data-hook
1317 install-dvi: install-dvi-recursive
1321 install-exec-am: install-exec-local
1323 $(MAKE) $(AM_MAKEFLAGS) install-exec-hook
1324 install-html: install-html-recursive
1328 install-info: install-info-recursive
1334 install-pdf: install-pdf-recursive
1338 install-ps: install-ps-recursive
1344 maintainer-clean: maintainer-clean-recursive
1345 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
1346 -rm -rf $(top_srcdir)/autom4te.cache
1348 maintainer-clean-am: distclean-am maintainer-clean-generic
1350 mostlyclean: mostlyclean-recursive
1352 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
1362 uninstall-am: uninstall-pkgdataDATA
1364 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \
1365 ctags-recursive install install-am install-data-am \
1366 install-exec-am install-strip tags-recursive
1368 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
1369 all all-am am--refresh check check-am clean clean-generic \
1370 clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
1371 dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-xz \
1372 dist-zip distcheck distclean distclean-generic \
1373 distclean-libtool distclean-tags distcleancheck distdir \
1374 distuninstallcheck dvi dvi-am html html-am info info-am \
1375 install install-am install-data install-data-am \
1376 install-data-hook install-data-local install-dvi \
1377 install-dvi-am install-exec install-exec-am install-exec-hook \
1378 install-exec-local install-html install-html-am install-info \
1379 install-info-am install-man install-pdf install-pdf-am \
1380 install-pkgdataDATA install-ps install-ps-am install-strip \
1381 installcheck installcheck-am installdirs installdirs-am \
1382 maintainer-clean maintainer-clean-generic mostlyclean \
1383 mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
1384 tags tags-recursive uninstall uninstall-am \
1385 uninstall-pkgdataDATA
1389 @installperms="$(INSTALLPERMS_exec)"; \
1390 test -n "$$installperms" && echo "Setting installation permissions on executables"; \
1391 dest=; chown=; chmod=; \
1392 for cmd in $$installperms; do \
1395 echo " ($$cmd)"; chown="$(BINARY_OWNER):$(SETUID_GROUP)";; \
1396 dest=*|chown=*|chmod=*) \
1397 echo " ($$cmd)"; eval $$cmd;; \
1403 @installperms="$(INSTALLPERMS_data)"; \
1404 dest=; chown=; chmod=; \
1405 for cmd in $$installperms; do \
1408 echo " ($$cmd)"; chown="$(BINARY_OWNER):$(SETUID_GROUP)";; \
1409 dest=*|chown=*|chmod=*) \
1410 echo " ($$cmd)"; eval $$cmd;; \
1415 install-exec-hook: installperms-exec
1416 install-data-hook: installperms-data
1418 # define a rule to initialize the installperms manifest file
1419 @WANT_INSTALLPERMS_TRUE@installperms-init:
1420 @WANT_INSTALLPERMS_FALSE@installperms-init:
1421 @WANT_INSTALLPERMS_FALSE@ rm -f "$(installperms_sh)"
1423 libtool: $(LIBTOOL_DEPS)
1424 $(SHELL) ./config.status --recheck
1426 # empty out the installperms manifest file when we start
1427 install-exec-local: installperms-init
1428 install-data-local: installperms-init
1429 $(CONFIG_STATUS): $(SNAPSHOT_STAMP)
1431 : SNAPSHOT file was removed, will reconfigure...
1434 (cd amandad-src; make lint)
1435 (cd changer-src; make lint)
1436 (cd client-src; make lint)
1437 (cd common-src; make lint)
1438 (cd oldrecover-src; make lint)
1439 (cd recover-src; make lint)
1440 (cd restore-src; make lint)
1441 (cd server-src; make lint)
1442 (cd xfer-src; make lint)
1445 find $(distdir)/. -name '*.test.c' -exec rm {} \;
1447 # Tell versions [3.59,3.63) of GNU make to not export all variables.
1448 # Otherwise a system limit (for SysV at least) may be exceeded.