* sdcc/sim/ucsim/s51.src/uc390cl.h: Improvement for ds390 to run regression tests
[fw/sdcc] / ChangeLog
1 2001-11-04  Bernhard Held  <bernhard@bernhardheld.de>
2
3         * sdcc/sim/ucsim/s51.src/uc390cl.h: Improvement for ds390 to run regression tests
4
5         * sdcc/sim/ucsim/s51.src/uc390.h: Improvement for ds390 to run regression tests
6
7         * sdcc/sim/ucsim/s51.src/regs51.h: Improvement for ds390 to run regression tests
8
9         * sdcc/sim/ucsim/s51.src/glob.cc: Improvement for ds390 to run regression tests
10
11         * sdcc/support/regression/tests/bug-460010.c: Small change for ds390
12
13 2001-11-04  Michael Hope  <michaelh@juju.net.nz>
14
15         * src/z80/peeph-gbz80.def: Removed a bad sub optimisation.
16
17 2001-11-03  Michael Hope  <michaelh@juju.net.nz>
18
19         * support/regression/tests/bug-477927.c: Added.
20
21         * src/z80/peeph.def: Added minor rules.
22
23         * src/z80/gen.c (genPlusIncr): Added an extra plusinc rule.
24
25         * src/z80/peeph.def: Added jump optimisation modification.
26
27 2001-11-01  Michael Hope  <michaelh@juju.net.nz>
28
29         * src/SDCCmain.c (linkEdit): Added runtime path detection to the mcs51 port.
30
31 2001-10-30  Michael Hope  <michaelh@juju.net.nz>
32
33         * support/regression/tests/funptrs.c: Added.
34
35 2001-10-29  Michael Hope  <michaelh@juju.net.nz>
36
37         * src/z80/ralloc.c (packRegsForHLUse): Fixed up bad spill due to pushing one byte via HL.
38
39 2001-10-28  Michael Hope  <michaelh@juju.net.nz>
40
41         * src/z80/gen.c (genArrayInit): Made it work for on stack arrays.
42
43         * src/z80/main.c (gbz80_port =): Added rle support to the gbz80 port.
44
45         * src/z80/gen.c (genMinus): Fixed for where the result is one byte.
46         (movLeft2ResultLong): Created.
47
48         * src/z80/ralloc.c (packRegsForHLUse): Added a couple of simple cases for the GB.
49         (joinPushes): Added.  Joins two char pushes into a word push.
50
51 2001-10-27  Michael Hope  <michaelh@juju.net.nz>
52
53         * support/cpp2/Makefile.in (install): Added creation of dest dir.
54
55         * support/makebin/Makefile (install): Added creation of dest dir.
56
57 2001-10-24 Karl Bongers <karl@turbobit.com>
58
59         * configure.in, configure, Makefile, support/cpp: Removed cpp folder, since we have new cpp2 preprocessor code.
60
61 2001-10-21  Michael Hope  <michaelh@juju.net.nz>
62
63         * src/z80/ralloc.c: Turned off faulty pack for one use.
64
65         * src/z80/peeph-gbz80.def: Removed redundent restart options.
66
67         * src/z80/gen.c (genMult): Added native mul for constants on the z80 and gbz80.
68
69 2001-10-21  Bernhard Held  <bernhard@bernhardheld.de>
70
71         * support/regression/Makefile: Improved clean
72
73         * support/regression/ports/gbz80/spec.mk: Added clean
74
75         * support/regression/ports/host/spec.mk: Added clean
76
77         * support/regression/ports/z80/spec.mk: Added clean
78
79         * support/regression/ports/mcs51/spec.mk: Added clean, little improvements
80
81         * support/regression/ports/mcs51/timeout.c: little improvements
82
83 2001-10-17  Michael Hope  <michaelh@juju.net.nz>
84
85         * device/lib/malloc.c (MEMHEADER): Fixed against new pedantic pointers.
86
87         * support/regression/fwk/include/testfwk.h: Fixed up to use function pts correctly.
88
89         * support/regression/generate-cases.py: Fixed up to use function pts correctly.
90
91 2001-10-16  Bernhard Held  <bernhard@bernhardheld.de>
92
93         * support/regression/port/mcs51/spec.mk: add timeout for uCsim
94
95         * support/regression/port/mcs51/timeout.c: add timeout for uCsim
96
97 2001-10-13  Michael Hope  <michaelh@juju.net.nz>
98         * src/z80/gen.c (emitCall): Fixed up missing spill of HL when used to assign the result value.
99
100         * src/z80/ralloc.c: Turned off pack for one use as it's quite broken.
101
102         * src/SDCCmain.c (linkEdit): Added support for passing a legacy command line through the processor.
103
104         * src/mcs51/main.c (_linkCmd): Added bin path to command.
105
106         * src/SDCCmain.c (initValues): Added support for when it it called just to link.
107
108         * as/mcs51/lklibr.c (libfil;): Turned off 'library file' message.
109
110         * src/SDCCval.c (constVal): Fixed usage of 'L' modifier problems on ppc.
111
112         * support/regression/tests/longor.c: Added.
113
114 2001-10-11  Bernhard Held  <bernhard@bernhardheld.de>
115
116         * as/mcs51/asdata.c: replaced FILENAME_MAX with PATH_MAX
117
118         * as/mcs51/aslink.h: define PATH_MAX
119
120         * as/mcs51/asm.h: define PATH_MAX
121
122         * as/mcs51/asmain.c: replaced FILENAME_MAX with PATH_MAX
123
124         * as/mcs51/asnoice.c: replaced FILENAME_MAX with PATH_MAX
125
126         * as/mcs51/lklex.c: replaced FILENAME_MAX with PATH_MAX
127
128         * as/mcs51/lkmain.c: replaced FILENAME_MAX with PATH_MAX
129
130         * src/SDCCglobl.h: define PATH_MAX
131
132         * src/SDCCmacro.c: replaced FILENAME_MAX with PATH_MAX
133
134         * src/SDCCmain.c: replaced FILENAME_MAX with PATH_MAX
135
136 2001-10-11  Michael Hope  <michaelh@juju.net.nz>
137
138         * src/z80/gen.c (gencjneshort): Fixed
139
140         * src/z80/ralloc.c (packRegsForHLUse): Added pack into HL for cast then ipush.
141
142 2001-10-09  Michael Hope  <michaelh@juju.net.nz>
143
144         * support/regression/tests/bug-469671.c: Added.
145
146         * src/z80/gen.c (shiftIntoPair): Fixed up warning.
147
148 2001-10-08  Michael Hope  <michaelh@juju.net.nz>
149
150         * src/SDCCmain.c: Added --fommit-frame-pointer option and implemented in the z80 port.
151
152         * src/z80/gen.c (genPlus): Fixed to work with extended stack.  Also fixed genMinus, genCmp.  genUMinus is still left.
153
154 2001-10-08  Bernhar Held  <bernhard@bernhardheld.de>
155
156         * src/SDCCmain.c (preProcess): added define SDCC_NOOVERLAY
157
158         * src/device/lib/_mulint.c  : removed hint: nooverlay bug
159
160         * src/device/lib/_mullong.c : removed hint: nooverlay bug
161
162         * src/device/lib/_divuint.c : removed hint: nooverlay bug
163
164         * src/device/lib/_divulong.c: removed hint: nooverlay bug
165
166         * src/device/lib/_moduint.c : removed hint: nooverlay bug
167
168         * src/device/lib/_modulong.c: removed hint: nooverlay bug
169
170 2001-10-07  Michael Hope  <michaelh@juju.net.nz>
171
172         * src/z80/gen.c (setupPair): Added 'extended stack' support for the z80.  Can now have local variables or parameters of more than 127 bytes in size.  Increadibly slow, but it will work.  Currently anything involving the carry flag.
173
174         * support/Util/NewAlloc.c (freeTrace): Changed free for the gc case to not free at all.  Fixes runtime segfault.
175
176         * support/regression/tests/scott-compare3.c (c_abcd): Fixed up casts.
177
178 2001-10-07    <johan@FRIJA>
179
180         * device/lib/gets.c (gets): fixed the return value.
181
182 2001-10-06  Michael Hope  <michaelh@juju.net.nz>
183         * src/SDCCmain.c (WRITE_SEG_LOC): Fixed up to use Safe_strdup.
184
185         * src/SDCCpeeph.c (peepHole): Fixed all leaks.  Added trace support for freeing lines.  Optimised restart logic to re-run instead of restart.  Now compiles dscan.c on ~60MB instead of ~200MB.
186
187         * support/Util/NewAlloc.c: Added ability to use libgc instead of malloc.  Added Safe_free and Safe_strdup.  Added trace support where you can log allocations and free all at once.
188
189         * src/z80/gen.c (genZ80Code): Added de-allocation via trace support.
190
191         * src/pic/gen.c: Removed Safe_strdup.
192
193         * configure.in: Added option to enable libgc support.
194
195         * src/SDCCbitv.c (bitVectnBitsOn): Optimised.
196         (bitVectUnion): Optimised.
197         (bitVectIntersect): Optimised.
198         (bitVectBitsInCommon): Optimised.
199         (bitVectCplAnd): Optimised.
200
201         * support/makebin/makebin.c (usage): Removed getopt as mingw32 doesn't have it.  Sigh.
202
203 2001-10-03 Bernhard Held <bernhard@bernhardheld.de>
204
205         * src/SDCCmain.c: distinguish between assembler debug and plain options
206
207         * src/avr/main.c:   remove standard assembler options
208
209         * src/ds390/main.c: remove standard assembler options
210
211         * src/mcs51/main.c: remove standard assembler options
212
213         * src/port.h: removed "PENDING" comment
214
215 2001-10-03 Bernhard Held <bernhard@bernhardheld.de>
216
217         * src/device/lib/_mulint.c  : new, with assember functions
218
219         * src/device/lib/_mullong.c : new, with assember functions
220
221         * src/device/lib/_divuint.c : with assember functions
222
223         * src/device/lib/_divsint.c : with assember functions
224
225         * src/device/lib/_divulong.c: with assember functions
226
227         * src/device/lib/_divslong.c: with assember functions
228
229         * src/device/lib/_moduint.c : with assember functions
230
231         * src/device/lib/_modsint.c : with assember functions
232
233         * src/device/lib/_modulong.c: with assember functions
234
235         * src/device/lib/_modslong.c: with assember functions
236
237         * src/device/lib/libint.lib:  replaced _muluint.c  and _mulsint.c  by _mulint.c
238
239         * src/device/lib/liblong.lib: replaced _mululong.c and _mulslong.c by _mullong.c
240
241         * src/device/lib/Makefile.in: replaced _muluint.c  and _mulsint.c  by _mulint.c
242                                       replaced _mululong.c and _mulslong.c by _mullong.c
243
244 2001-10-03 Bernhard Held <bernhard@bernhardheld.de>
245
246         * src/SDCCsymt.c: sequence of specifiers in pintTypeChain() corrected
247
248 2001-10-01 Bernhard Held <bernhard@bernhardheld.de>
249
250         * src/SDCCglue.c: test, if win32api is available for MINGW
251
252 2001-10-01 Bernhard Held <bernhard@bernhardheld.de>
253
254         * src/SDCCsymt.c: no more _modifier in printTypeChain()
255         * support/regression/tests/driverstruct.c: REENTRANT for mcs51
256         * support/regression/ports/gbz80/spec.mk: removed GENERIC
257         * support/regression/ports/host/spec.mk: removed GENERIC
258         * support/regression/ports/mcs51/spec.mk: removed GENERIC
259         * support/regression/ports/z80/spec.mk: removed GENERIC
260
261 2001-10-01  Michael Hope  <michaelh@juju.net.nz>
262
263         * support/regression/fwk/lib/testfwk.c (__printf): Removed GENERIC.
264
265         * support/regression/tests/bug-467035.c: Created.
266
267 2001-10-01    <johan@FRIJA>
268
269         * src/SDCC.y: fixed bug #466586 part 1
270
271 2001-10-01  Johan Knol <johan.knol@iduna.nl>
272
273         * SDCCicode.c: z80 has no generic pointers
274         * removed -s from strip in all Makefile(.in)'s. It is not needed, but Solaris chocks on it.
275         
276 2001-09-30  Michael Hope  <michaelh@juju.net.nz>
277
278         * sim/ucsim/cmd.src/Makefile.in ($(PRJDIR)/libcmd.a): Changed all ar references to $(AR) for Solaris.
279
280 2001-09-29  Michael Hope  <michaelh@juju.net.nz>
281
282         * Makefile (sdcc-libs): Added makebin to the list of standard targets.
283
284         * support/regression/ports/z80/spec.mk: Updated to use env for sdcc bin dir for automatic regression.
285
286 2001-09-25  Michael Hope  <michaelh@juju.net.nz>
287
288         * configure.in: Fixed up so that ucsim is only configured once.
289
290         * support/cpp2/configure.in: Fixed to use the program transform to append the .exe for the win32 build.
291
292         * src/SDCCutil.c (getPrefixFromBinPath): Fixed up to work with win32 in all of its glory.
293         (getPathDifference): As above.
294
295         * src/SDCCmain.c (preProcess): Changed to use a temporary file in a proper temp directory.  Fixed case where pre-processing only.
296
297         * src/SDCCglue.c (tempfilename): Added function for pre-processor.
298
299 2001-09-23  Michael Hope  <michaelh@juju.net.nz>
300         * .version: Updated to 2.3.1
301
302         * src/z80/main.c (z80_port =): Added macro based linker and assembler command line support.
303         Added copyright header.
304
305         * src/SDCCmain.c: Shifted various functions into SDCCutil.c
306         (assemble): Added support for macro based assembler commands.
307         (linkEdit): Added support for macro based linker commands.
308         (preProcess): Changed the pre-processor to use macros.
309         (_setPaths): Added functionality to autodetect the include, lib and bin dir paths.
310         (_discoverPaths): Added support for overriding the install directory using the SDCCDIR env variable.
311
312         * device/lib/z80/crt0.s: Added module name for debugging.
313
314 2001-09-20  Michael Hope  <michaelh@juju.net.nz>
315
316         * src/SDCCmain.c (printVersionInfo): Added the build date to the version info.
317
318         * src/SDCChasht.c (hTabDeleteByKey): Fixed delete as it would delete the last item from a bucket even if it wasn't the real one.
319
320         * src/SDCCglue.c: Moved gc_strdup to SDCCutil.c
321
322         * src/Makefile.in: Added SDCCmacro and SDCCutil
323
324 2001-09-19  Michael Hope  <michaelh@juju.net.nz>
325
326         * src/SDCCmain.c (printVersionInfo): Added the build date to the version info.
327
328 2001-09-16    <johan@FRIJA>
329
330         * support/Util/SDCCerr.c: fixed up the error/warning/info database. I only changed the E_ W_ I_ prefix to what SDCCerr.c says it is.
331
332 2001-09-15    <johan@FRIJA>
333
334         * src/mcs51/ralloc.c: (findAssignToSym): fixed bug #460662 part 1
335         * src/ds390/ralloc.c (findAssignToSym): fixed bug #460662 part 1
336
337 2001-09-11    <johan@FRIJA>
338
339         * src/SDCCval.c (valDiv Mod Minus Plus Shift): keep litteral expressions as small as possible (bug #460010)
340
341 2001-09-10  Michael Hope  <michaelh@juju.net.nz>
342
343         * support/regression/tests/bug-460444.c: Added test case.
344
345         * src/z80/gen.c (genOr): bug 460444: if (a ^ lit) was broken for &, |, and ^.
346         (genCast): Added justification for all of the asserts.
347
348 2001-09-10  Bernhard Held <bernhard@bernhardheld.de>
349
350         * support/regression/support.c: _xdata replaced by xdata
351
352         * support/regression/spec.mk: removed _generic
353
354 2001-09-09  Michael Hope  <michaelh@juju.net.nz>
355
356         * src/pic/ralloc.c (debugLogRegType): Removed some old types to get it to compile.
357
358         * src/z80/gen.c (shiftR2Left2Result): Improved the case when v = v >> n for small values of n to use less code space and time.
359         (genrshTwo): Fixed v = v >> n where v is a negative int and n is > 8: bug 460010.
360
361         * src/z80/peeph.def: Added a rule to optimise shift then compare.
362
363         * support/regression/tests/bug-460000.c (testShiftByParam): Added test case.
364
365         * support/regression/tests/bug-460010.c: Added test case.
366
367         * support/regression/Makefile (test-host): Removed a silly 'clean' target when testing against gcc.
368
369 2001-09-09  Bernhard Held <bernhard@bernhardheld.de>
370
371         * support/regression/Makefile: inter-port-clean adjusted for mcs51
372
373         * support/regression/testfwk.c: removed workaround for bug #436344
374
375         * support/regression/tests/bp.c: use less memory with mcs51
376
377         * support/regression/tests/bug-441448.c: use less memory
378
379         * support/regression/tests/ports/mcs51/spec.mk: cleanup, use --stack-after-data
380
381         * support/regression/collate-results.py: typo
382
383 2001-09-08  Michael Hope  <michaelh@juju.net.nz>
384
385         * support/regression/tests/fetchoverlap.c: Added new test case.
386
387         * support/regression/tests/bp.c: Added new test case.
388
389         * support/regression/tests/bug-448984.c: Added new test case.
390
391         * support/regression/tests/pow2shifts.c: Added new test case.
392
393         * src/z80/gen.c: Turned off the noise it normally generates for the release.
394         (genlshTwo): Fixed right shift for count > 8.
395
396         * src/z80/ralloc.c: Disabled most of the ACC packing rules as they weren't getting hit and weren't at all safe.
397
398 2001-09-08    <johan@FRIJA>
399
400         * src/SDCCicode.c (geniCodeCall): a CPOINTER can be used as a function
401
402 2001-09-07    <johan@FRIJA>
403
404         * src/SDCCicode.c (newiCodeCondition): fixed bug #456235 (1.77)
405
406         * src/SDCCglue.c (emitRegularMap): only delete a symbol when it is a symbol
407
408 2001-09-06    <johan@FRIJA>
409
410         * src/SDCC.y: this could be a fix for bug #458744 (1.37)
411         * bernhard noted me at this: "() equals to (void)" (1.38)
412
413 2001-09-05    <johan@FRIJA>
414
415         * src/SDCCglue.c (emitRegularMap): a fix for bug #458099/2
416
417 2001-09-04    <johan@FRIJA>
418
419         * src/SDCCsymt.c (checkSClass): a fix for bug #458099/1
420
421
422 2001-09-04  Paul Stoffregen  <paul@pjrc.com>
423
424         * pragma noinduction broke memcpy on mcs51 large model.  Moved it inside z80 optimization
425
426 2001-09-03  Michael Hope  <michaelh@juju.net.nz>
427
428         * link/z80/aslink.h: Fixed path for PATH_MAX
429
430 2001-09-02  Michael Hope  <michaelh@juju.net.nz>
431
432         * src/z80/gen.c (fetchLitPair): Changed so that it properly caches direct space references.
433
434         * support/regression/tests/addsub.c: Added cases to cover all the +, - combinations.
435
436         * support/regression/tests/uminus.c: Added a test for the unary minus operator.
437
438         * src/z80/gen.c (genUminus): Fixed add, sub, and uminus on the gbz80 port for longs.  Had to shift some functions about to do it.
439
440 2001-09-01  Michael Hope  <michaelh@juju.net.nz>
441
442         * src/z80/gen.c: Fixed up generator to pass the regresion tests, specifically fixing loads for longs, genCmp, and turned on the map file.
443         (genCmp): Fixed up genCmp for the GB with longs.
444
445         * device/lib/gbz80/Makefile: Fixed up all the libraries to pass the regression tests.
446
447         * support/regression/ports/host/spec.mk: Updated to compile with the new type specifiers.
448
449         * device/lib/Makefile.in (Z80SOURCES): Removed old _mululong, _mulslong, and unneeded _mulint.
450
451         * device/lib/_mullong.c (_mulslong): Changed to actually return a value :)
452
453 2001-08-30  Paul Stoffregen  <paul@pjrc.com>
454
455         * added peepholes 223 to 231 to mcs51 port.  These improve code when using large model.
456
457 2001-08-30  Michael Hope  <michaelh@juju.net.nz>
458
459         * device/lib/gbz80/crt0.s (init): Fixed up support for the gbz80 such that it will at least run (and fail badly) the regression tests.
460
461         * src/z80/gen.c (genPlus): Changed bad long add for gb to a fall through.
462
463 2001-08-29  Michael Hope  <michaelh@juju.net.nz>
464
465         * link/z80/aslink.h: Fixed long file name support.  Is now based off PATH_MAX instead of a constant.
466
467         * src/z80/gen.c: Fixed add and sub for the case where left or right are in static space.
468
469 2001-08-30 Bernhard Held   <bernhard@bernhardheld.de>
470
471   * sim/ucsim/configure:    little improvement of Cygwin-detection      
472   * sim/ucsim/configure.in: little improvement of Cygwin-detection      
473   * sim/ucsim/cmd.src/newcmdcl.h: include <sys/types.h> to define fd_set automated build
474   * support/regression/tests/bug-221100.c: small changes for mcs51
475   * support/regression/tests/bug-221168.c: small changes for mcs51
476   * support/regression/tests/bug-227710.c: small changes for mcs51
477   * support/regression/tests/staticinit.c: small changes for mcs51
478   * as/mcs51/aslink.h: accept everything as symbol name in rel-files, bug fix ID 452601
479   * as/mcs51/lklex.c:  accept everything as symbol name in rel-files, bug fix ID 452601
480   * as/mcs51/lksym.c:  accept everything as symbol name in rel-files, bug fix ID 452601