1 2011-09-18 Sampo Niskanen
3 * Remember window/dialog sizes and/or positions
5 2011-09-13 Sampo Niskanen
7 * Added icons to help menu
9 2011-08-28 Richard Graham
11 * Patch for geodetic computations + coriolis effect
12 * Patch for enhanced gravity model
14 2011-08-25 Sampo Niskanen
16 * Released version 1.1.8
17 * [BUG] Ignore synthetic methods in logging traces
18 * [BUG] Ignore JRE bug #6826104
20 2011-08-24 Sampo Niskanen
22 * [BUG] NPE in SimulationOptions.equals
23 * [BUG] Exception in plotting optimization path
24 * [BUG] Exception in saving optimization path
26 2011-08-17 Justin Seitz
28 * Added Blue tube to materials database.
30 2011-08-13 Sampo Niskanen
32 * [BUG] JDK7 returns null font for TitledBorder
34 2011-08-12 Sampo Niskanen
36 * Released version 1.1.7
38 2011-08-08 Sampo Niskanen
40 * Enhanced one-dimensional optimization algorithm
41 * [BUG] l10n/ directory not included in source distribution
43 2011-08-07 Sampo Niskanen
45 * Optimization implementation
47 2011-07-29 Sampo Niskanen
49 * [BUG] NaN in transition radius calculation
51 2011-07-22 Sampo Niskanen
53 * Released version 1.1.6.
55 2011-07-21 Sampo Niskanen
57 * [BUG] Converting triangular fin to freeform
58 * [BUG] Unit conversions in printout
59 * [BUG] Mass computations in printout
60 * [BUG] "Not a drop" exception in ComponentTreeTransferHandler
61 * [BUG] Plot annotation positioned wrong
62 * [BUG] Exception when writing PDF failed
63 * Language selector in preferences
65 2011-07-18 Sampo Niskanen
67 * Select motor type based on known manufacturers
68 * Updated motor thrust curves from thrustcurve.org
70 2011-07-17 Sampo Niskanen
72 * Component scaling support
74 2011-07-14 Sampo Niskanen
76 * [BUG] Body tube auto-radius not enabled
77 * Optimization implementation
79 2011-06-26 Sampo Niskanen
81 * [BUG] Original rocket was modified when sim.listener modified rocket
83 2011-06-18 Sampo Niskanen
85 * Merged l10n branch into trunk, initial l10n support
87 2011-06-10 Sampo Niskanen
89 * Released version 1.1.5
91 2011-05-16 Sampo Niskanen
93 * Updated about dialog
95 2011-04-15 Sampo Niskanen
97 * Removed native printing support
99 2011-03-05 Sampo Niskanen
101 * Released version 1.1.4
103 2011-01-20 Sampo Niskanen
105 * Initial i18n support
107 2011-01-18 Sampo Niskanen
109 * [BUG] Simulation warnings were not being stored
110 * [BUG] Exclamation mark did not fit in simulation table
111 * Added instructions for zooming in plot dialog
113 2010-12-01 Doug Pedrick
115 * Merging printing support
117 2010-10-30 Sampo Niskanen
119 * [BUG] Invalid refereces to components used in caches
121 2010-10-25 Doug Pedrick
123 * [BUG] Take launch lug radial angle into account when loading rkt file
125 2010-10-24 Sampo Niskanen
127 * Added SafetyMutex and took into use in Simulation
129 2010-10-18 Sampo Niskanen
131 * Ignore Sun JRE bug in D3D
133 2010-10-09 Sampo Niskanen
135 * [BUG] Fixed conversion to freeform fin set
138 2010-10-08 Sampo Niskanen
140 * New components no longer look expandable in the component tree
142 2010-10-06 Sampo Niskanen
144 * Released version 1.1.3
146 2010-10-05 Sampo Niskanen
148 * Display comment as tooltip in component tree
149 * Limited allowed component attachments to those of the component
152 2010-10-03 Sampo Niskanen
154 * Added VBOSE logging level
156 2010-10-02 Sampo Niskanen
158 * [BUG] Exception when undoing changes
160 2010-09-27 Sampo Niskanen
162 * Implemented DnD for component tree
163 * Documented undo/redo functionality
165 2010-09-07 Sampo Niskanen
167 * Released version 1.1.2
169 2010-09-05 Sampo Niskanen
171 * [BUG] Fixed bug that prevents adding stages to a rocket
173 2010-09-04 Sampo Niskanen
175 * Added launch rod velocity to FlightData
176 * [BUG] Total velocity was measured from airspeed
178 2010-09-03 Sampo Niskanen
180 * Released version 1.1.1
182 2010-09-01 Sampo Niskanen
184 * [BUG] Fixed rocket config dialog being too large
186 2010-08-31 Sampo Niskanen
188 * Updated all thrust curves from thrustcurve.org
190 2010-08-30 Sampo Niskanen
192 * Implemented user-defined thrust curve loading
194 2010-07-30 Sampo Niskanen
196 * [BUG] Fixed motor statistic computation
197 * Finalized enhanced motor selection dialog
199 2010-07-22 Doug Pedrick
201 * [BUG] Fixed RockSim fin loading
203 2010-07-21 Sampo Niskanen
205 * Implemented enhanced motor selection dialog
206 * Background motor loading & startup time optimization
208 2010-07-20 Doug Pedrick
210 * [BUG] Exception when loading Rocksim files
212 2010-07-19 Sampo Niskanen
214 * [BUG] Various small bug fixes
216 2010-07-18 Sampo Niskanen
218 * Major refactoring of simulation code
220 2010-03-21 Sampo Niskanen
222 * Released version 1.1.0
224 2010-03-20 Doug Pedrick
226 * [BUG] Fixed RockSim design material loading
228 2010-03-20 Sampo Niskanen
230 * Minor enhancements to the logging system
231 * Updated unit tests of Rocksim file loading
233 2010-03-13 Doug Pedrick / Sampo Niskanen
235 * Initial RockSim design loading support
237 2010-03-10 Sampo Niskanen
239 * Released version 1.0.0
240 * [BUG] Removing point of freeform fin could create intersecting shape
242 2010-03-09 Sampo Niskanen
244 * Updated thrustcurves with newest curves from thrustcurve.org
245 * Updated splash screen
247 2010-03-05 Sampo Niskanen
249 * [BUG] Fixed exception for fins with small root chord
251 2010-02-26 Sampo Niskanen
253 * Simulation panel max.acceleration now from flight stage only
255 2010-02-17 Sampo Niskanen
257 * Released version 0.9.6
259 2010-01-11 Sampo Niskanen
261 * Detect out of memory condition even if masked by another exception
262 * Updated copyright year
264 2009-12-31 Sampo Niskanen
266 * [BUG] Exception when removing component listeners
267 * [BUG] OutOfMemoryError was masked when saving file
269 2009-12-30 Sampo Niskanen
271 * [BUG] "Reset" button did nothing for simulation time step
273 2009-12-29 Sampo Niskanen
275 * Update fin calculation methods for 1 and 2 fin sets
276 * Rotate rocket to worst roll angle before simulations
278 2009-12-23 Sampo Niskanen
280 * Updated time step selection methods
282 2009-12-16 Sampo Niskanen
284 * [BUG] Fixed NullPointerException in ComponentConfigDialog
286 2009-12-15 Sampo Niskanen
288 * [BUG] Illegal mapping in SimulationRunDialog
289 * [BUG] Fixed assertions in Quaternion class
291 2009-12-14 Sampo Niskanen
293 * Implemented central logging system (not taken into use yet)
295 2009-12-05 Sampo Niskanen
297 * [BUG] Fixed assertions in Quaternion class
299 2009-12-03 Sampo Niskanen
301 * [BUG] Fixed fin computation of two-fin set
303 2009-12-02 Sampo Niskanen
305 * Take into account all fins in fin-fin interference
306 * Removed 15%/6% fin dependence on lateral wind direction
308 2009-11-28 Sampo Niskanen
310 * Released version 0.9.5
311 * [BUG] NPE when clearing combo box selections
312 * Minor fixes to update checking
313 * Added a few guidance texts
315 2009-11-27 Sampo Niskanen
317 * [BUG] Fixed computing inner radius of centering ring
318 * Removed RuntimeException instantiation from all classes
320 2009-11-24 Sampo Niskanen
322 * Released version 0.9.4
324 2009-11-24 Sampo Niskanen
326 * Close original window when opening example design
328 2009-11-10 Sampo Niskanen
330 * [BUG] Fixed transition volume/mass computation
331 * [BUG] Simulations etc. using removed motor configuration IDs
333 2009-10-11 Sampo Niskanen
335 * [BUG] Sorting motor selection dialog with ',' decimal separator
337 2009-10-10 Sampo Niskanen
339 * Removed non-ASCII characters from source code files
340 * Created Chars class for non-ASCII characters
341 * Added styrofoam materials
343 2009-10-04 Sampo Niskanen
345 * [BUG] Fixed too high configuration dialogs
347 2009-10-03 Sampo Niskanen
349 * Added debug information to ant build file compilation
350 * Implemented update information fetching (client side)
352 2009-09-26 Sampo Niskanen
354 * Implemented custom material editing
356 2009-09-20 Sampo Niskanen
358 * Implemented more unit tests, fixed bugs
360 2009-09-19 Sampo Niskanen
362 * [BUG] Ignore Sun JRE bug 6828938 in ExceptionHandler
363 * Implemented non-exception throwing bug handling
364 * [BUG] Fixed unnecessary cropping for component tree names
366 2009-09-10 Sampo Niskanen
368 * [BUG] Freeform fin set shape undo not working
369 * [BUG] Conversion to freeform fin set not working
371 2009-09-08 Sampo Niskanen
373 * Allow components to be attached to tube coupler
375 2009-09-07 Sampo Niskanen
377 * Implemented fin tab save/load
379 2009-09-04 Sampo Niskanen
381 * Implemented through-the-wall fin tabs (excluding save/load)
383 2009-09-01 Sampo Niskanen
385 * Released version 0.9.3
387 2009-08-29 Sampo Niskanen
389 * Extracted motor manufacturer into separate class
390 * Started writing unit tests
392 2009-08-28 Sampo Niskanen
394 * Added icon and source info to About dialog
395 * Finalized flight event plot icons
397 2009-08-27 Sampo Niskanen
399 * Allow clicking on label to toggle checkbox in two tables
401 2009-08-21 Sampo Niskanen
403 * Showing events in non-time-domain-plots
405 2009-08-20 Sampo Niskanen
407 * Showing events in time-domain plots
409 2009-08-15 Sampo Niskanen
411 * Possibility to save user-defined materials
413 2009-08-14 Sampo Niskanen
415 * Plots ignore trailing NaN values
417 2009-08-13 Sampo Niskanen
419 * [BUG] Added fin cant for elliptical fins
421 2009-08-12 Sampo Niskanen
423 * Warning dialog when loading files
424 * [BUG] Unnecessary warnings when loading files
426 2009-08-09 Sampo Niskanen
428 * [BUG] Fixed various bugs in motor loading (e.g. mass calculation,
429 more rigorous input checking etc)
431 2009-08-08 Sampo Niskanen
433 * Refactored motor loading and "Simple XML" loading classes
434 * Implemented RockSim motor definition file loading
436 2009-08-07 Sampo Niskanen
438 * Created window icons and took into use
439 * Changed motor burn time and avg. thrust calculations to be
442 2009-08-03 Sampo Niskanen
444 * Automatic bug reporting when uncaught exceptions occur
446 2009-07-29 Sampo Niskanen
448 * Clustered inner tube splitting
449 * [BUG] Copy-pasted inner tubes shared motors
451 2009-07-28 Sampo Niskanen
453 * Opening of example rocket designs
455 2009-07-27 Sampo Niskanen
457 * [BUG] Launch lug radial position not correctly loaded
459 2009-07-26 Sampo Niskanen
461 * [BUG] Fixed unit name of ft/s^2
462 * Implemented flight data exporting
463 * [BUG] Fixed "unknown error" when opening file of zero size
464 * [BUG] Fixed exception in motor configuration name editing
466 2009-07-13 Sampo Niskanen
468 * Released version 0.9.2
470 2009-07-12 Sampo Niskanen
472 * [BUG] Better DescriptionArea based on JEditorPane
474 2009-07-09 Sampo Niskanen
476 * [BUG] Fixed imperial unit conversions
477 * [BUG] Fixed engine block icon transparency
479 2009-06-26 Sampo Niskanen
481 * Progress dialogs for file open/save
482 * File size estimate in save dialog
484 2009-06-20 Sampo Niskanen
486 * New edit motor configurations dialog
487 * Changed FreeformFinSet to throw checked exceptions
489 2009-06-11 Sampo Niskanen
491 * Added search field to motor chooser dialog
493 2009-06-09 Sampo Niskanen
495 * Released version 0.9.1
497 2009-06-08 Sampo Niskanen
499 * Fixed loading of icons from JAR
501 2009-06-06 Sampo Niskanen
503 * Cut/Copy/Paste of simulations
504 * Improved build scripts
506 2009-05-28 Sampo Niskanen
508 * Added startup check for Java 1.6 and OpenJDK
510 2009-05-28 Sampo Niskanen
512 * Fixed FixedPrecisionUnit formatting
513 * Fixed saving of transitions
514 * Fixed file dialog directory browsing
515 * Initial shift-click selects second component from figure
516 * Allow adding body components without selecting stage
518 2009-05-24 Sampo Niskanen <sampo.niskanen@iki.fi>
520 * Initial release 0.9.0