1 2011-08-28 Richard Graham
3 * Patch for geodetic computations + coriolis effect
4 * Patch for enhanced gravity model
6 2011-08-25 Sampo Niskanen
8 * Released version 1.1.8
9 * [BUG] Ignore synthetic methods in logging traces
10 * [BUG] Ignore JRE bug #6826104
12 2011-08-24 Sampo Niskanen
14 * [BUG] NPE in SimulationOptions.equals
15 * [BUG] Exception in plotting optimization path
16 * [BUG] Exception in saving optimization path
18 2011-08-17 Justin Seitz
20 * Added Blue tube to materials database.
22 2011-08-13 Sampo Niskanen
24 * [BUG] JDK7 returns null font for TitledBorder
26 2011-08-12 Sampo Niskanen
28 * Released version 1.1.7
30 2011-08-08 Sampo Niskanen
32 * Enhanced one-dimensional optimization algorithm
33 * [BUG] l10n/ directory not included in source distribution
35 2011-08-07 Sampo Niskanen
37 * Optimization implementation
39 2011-07-29 Sampo Niskanen
41 * [BUG] NaN in transition radius calculation
43 2011-07-22 Sampo Niskanen
45 * Released version 1.1.6.
47 2011-07-21 Sampo Niskanen
49 * [BUG] Converting triangular fin to freeform
50 * [BUG] Unit conversions in printout
51 * [BUG] Mass computations in printout
52 * [BUG] "Not a drop" exception in ComponentTreeTransferHandler
53 * [BUG] Plot annotation positioned wrong
54 * [BUG] Exception when writing PDF failed
55 * Language selector in preferences
57 2011-07-18 Sampo Niskanen
59 * Select motor type based on known manufacturers
60 * Updated motor thrust curves from thrustcurve.org
62 2011-07-17 Sampo Niskanen
64 * Component scaling support
66 2011-07-14 Sampo Niskanen
68 * [BUG] Body tube auto-radius not enabled
69 * Optimization implementation
71 2011-06-26 Sampo Niskanen
73 * [BUG] Original rocket was modified when sim.listener modified rocket
75 2011-06-18 Sampo Niskanen
77 * Merged l10n branch into trunk, initial l10n support
79 2011-06-10 Sampo Niskanen
81 * Released version 1.1.5
83 2011-05-16 Sampo Niskanen
85 * Updated about dialog
87 2011-04-15 Sampo Niskanen
89 * Removed native printing support
91 2011-03-05 Sampo Niskanen
93 * Released version 1.1.4
95 2011-01-20 Sampo Niskanen
97 * Initial i18n support
99 2011-01-18 Sampo Niskanen
101 * [BUG] Simulation warnings were not being stored
102 * [BUG] Exclamation mark did not fit in simulation table
103 * Added instructions for zooming in plot dialog
105 2010-12-01 Doug Pedrick
107 * Merging printing support
109 2010-10-30 Sampo Niskanen
111 * [BUG] Invalid refereces to components used in caches
113 2010-10-25 Doug Pedrick
115 * [BUG] Take launch lug radial angle into account when loading rkt file
117 2010-10-24 Sampo Niskanen
119 * Added SafetyMutex and took into use in Simulation
121 2010-10-18 Sampo Niskanen
123 * Ignore Sun JRE bug in D3D
125 2010-10-09 Sampo Niskanen
127 * [BUG] Fixed conversion to freeform fin set
130 2010-10-08 Sampo Niskanen
132 * New components no longer look expandable in the component tree
134 2010-10-06 Sampo Niskanen
136 * Released version 1.1.3
138 2010-10-05 Sampo Niskanen
140 * Display comment as tooltip in component tree
141 * Limited allowed component attachments to those of the component
144 2010-10-03 Sampo Niskanen
146 * Added VBOSE logging level
148 2010-10-02 Sampo Niskanen
150 * [BUG] Exception when undoing changes
152 2010-09-27 Sampo Niskanen
154 * Implemented DnD for component tree
155 * Documented undo/redo functionality
157 2010-09-07 Sampo Niskanen
159 * Released version 1.1.2
161 2010-09-05 Sampo Niskanen
163 * [BUG] Fixed bug that prevents adding stages to a rocket
165 2010-09-04 Sampo Niskanen
167 * Added launch rod velocity to FlightData
168 * [BUG] Total velocity was measured from airspeed
170 2010-09-03 Sampo Niskanen
172 * Released version 1.1.1
174 2010-09-01 Sampo Niskanen
176 * [BUG] Fixed rocket config dialog being too large
178 2010-08-31 Sampo Niskanen
180 * Updated all thrust curves from thrustcurve.org
182 2010-08-30 Sampo Niskanen
184 * Implemented user-defined thrust curve loading
186 2010-07-30 Sampo Niskanen
188 * [BUG] Fixed motor statistic computation
189 * Finalized enhanced motor selection dialog
191 2010-07-22 Doug Pedrick
193 * [BUG] Fixed RockSim fin loading
195 2010-07-21 Sampo Niskanen
197 * Implemented enhanced motor selection dialog
198 * Background motor loading & startup time optimization
200 2010-07-20 Doug Pedrick
202 * [BUG] Exception when loading Rocksim files
204 2010-07-19 Sampo Niskanen
206 * [BUG] Various small bug fixes
208 2010-07-18 Sampo Niskanen
210 * Major refactoring of simulation code
212 2010-03-21 Sampo Niskanen
214 * Released version 1.1.0
216 2010-03-20 Doug Pedrick
218 * [BUG] Fixed RockSim design material loading
220 2010-03-20 Sampo Niskanen
222 * Minor enhancements to the logging system
223 * Updated unit tests of Rocksim file loading
225 2010-03-13 Doug Pedrick / Sampo Niskanen
227 * Initial RockSim design loading support
229 2010-03-10 Sampo Niskanen
231 * Released version 1.0.0
232 * [BUG] Removing point of freeform fin could create intersecting shape
234 2010-03-09 Sampo Niskanen
236 * Updated thrustcurves with newest curves from thrustcurve.org
237 * Updated splash screen
239 2010-03-05 Sampo Niskanen
241 * [BUG] Fixed exception for fins with small root chord
243 2010-02-26 Sampo Niskanen
245 * Simulation panel max.acceleration now from flight stage only
247 2010-02-17 Sampo Niskanen
249 * Released version 0.9.6
251 2010-01-11 Sampo Niskanen
253 * Detect out of memory condition even if masked by another exception
254 * Updated copyright year
256 2009-12-31 Sampo Niskanen
258 * [BUG] Exception when removing component listeners
259 * [BUG] OutOfMemoryError was masked when saving file
261 2009-12-30 Sampo Niskanen
263 * [BUG] "Reset" button did nothing for simulation time step
265 2009-12-29 Sampo Niskanen
267 * Update fin calculation methods for 1 and 2 fin sets
268 * Rotate rocket to worst roll angle before simulations
270 2009-12-23 Sampo Niskanen
272 * Updated time step selection methods
274 2009-12-16 Sampo Niskanen
276 * [BUG] Fixed NullPointerException in ComponentConfigDialog
278 2009-12-15 Sampo Niskanen
280 * [BUG] Illegal mapping in SimulationRunDialog
281 * [BUG] Fixed assertions in Quaternion class
283 2009-12-14 Sampo Niskanen
285 * Implemented central logging system (not taken into use yet)
287 2009-12-05 Sampo Niskanen
289 * [BUG] Fixed assertions in Quaternion class
291 2009-12-03 Sampo Niskanen
293 * [BUG] Fixed fin computation of two-fin set
295 2009-12-02 Sampo Niskanen
297 * Take into account all fins in fin-fin interference
298 * Removed 15%/6% fin dependence on lateral wind direction
300 2009-11-28 Sampo Niskanen
302 * Released version 0.9.5
303 * [BUG] NPE when clearing combo box selections
304 * Minor fixes to update checking
305 * Added a few guidance texts
307 2009-11-27 Sampo Niskanen
309 * [BUG] Fixed computing inner radius of centering ring
310 * Removed RuntimeException instantiation from all classes
312 2009-11-24 Sampo Niskanen
314 * Released version 0.9.4
316 2009-11-24 Sampo Niskanen
318 * Close original window when opening example design
320 2009-11-10 Sampo Niskanen
322 * [BUG] Fixed transition volume/mass computation
323 * [BUG] Simulations etc. using removed motor configuration IDs
325 2009-10-11 Sampo Niskanen
327 * [BUG] Sorting motor selection dialog with ',' decimal separator
329 2009-10-10 Sampo Niskanen
331 * Removed non-ASCII characters from source code files
332 * Created Chars class for non-ASCII characters
333 * Added styrofoam materials
335 2009-10-04 Sampo Niskanen
337 * [BUG] Fixed too high configuration dialogs
339 2009-10-03 Sampo Niskanen
341 * Added debug information to ant build file compilation
342 * Implemented update information fetching (client side)
344 2009-09-26 Sampo Niskanen
346 * Implemented custom material editing
348 2009-09-20 Sampo Niskanen
350 * Implemented more unit tests, fixed bugs
352 2009-09-19 Sampo Niskanen
354 * [BUG] Ignore Sun JRE bug 6828938 in ExceptionHandler
355 * Implemented non-exception throwing bug handling
356 * [BUG] Fixed unnecessary cropping for component tree names
358 2009-09-10 Sampo Niskanen
360 * [BUG] Freeform fin set shape undo not working
361 * [BUG] Conversion to freeform fin set not working
363 2009-09-08 Sampo Niskanen
365 * Allow components to be attached to tube coupler
367 2009-09-07 Sampo Niskanen
369 * Implemented fin tab save/load
371 2009-09-04 Sampo Niskanen
373 * Implemented through-the-wall fin tabs (excluding save/load)
375 2009-09-01 Sampo Niskanen
377 * Released version 0.9.3
379 2009-08-29 Sampo Niskanen
381 * Extracted motor manufacturer into separate class
382 * Started writing unit tests
384 2009-08-28 Sampo Niskanen
386 * Added icon and source info to About dialog
387 * Finalized flight event plot icons
389 2009-08-27 Sampo Niskanen
391 * Allow clicking on label to toggle checkbox in two tables
393 2009-08-21 Sampo Niskanen
395 * Showing events in non-time-domain-plots
397 2009-08-20 Sampo Niskanen
399 * Showing events in time-domain plots
401 2009-08-15 Sampo Niskanen
403 * Possibility to save user-defined materials
405 2009-08-14 Sampo Niskanen
407 * Plots ignore trailing NaN values
409 2009-08-13 Sampo Niskanen
411 * [BUG] Added fin cant for elliptical fins
413 2009-08-12 Sampo Niskanen
415 * Warning dialog when loading files
416 * [BUG] Unnecessary warnings when loading files
418 2009-08-09 Sampo Niskanen
420 * [BUG] Fixed various bugs in motor loading (e.g. mass calculation,
421 more rigorous input checking etc)
423 2009-08-08 Sampo Niskanen
425 * Refactored motor loading and "Simple XML" loading classes
426 * Implemented RockSim motor definition file loading
428 2009-08-07 Sampo Niskanen
430 * Created window icons and took into use
431 * Changed motor burn time and avg. thrust calculations to be
434 2009-08-03 Sampo Niskanen
436 * Automatic bug reporting when uncaught exceptions occur
438 2009-07-29 Sampo Niskanen
440 * Clustered inner tube splitting
441 * [BUG] Copy-pasted inner tubes shared motors
443 2009-07-28 Sampo Niskanen
445 * Opening of example rocket designs
447 2009-07-27 Sampo Niskanen
449 * [BUG] Launch lug radial position not correctly loaded
451 2009-07-26 Sampo Niskanen
453 * [BUG] Fixed unit name of ft/s^2
454 * Implemented flight data exporting
455 * [BUG] Fixed "unknown error" when opening file of zero size
456 * [BUG] Fixed exception in motor configuration name editing
458 2009-07-13 Sampo Niskanen
460 * Released version 0.9.2
462 2009-07-12 Sampo Niskanen
464 * [BUG] Better DescriptionArea based on JEditorPane
466 2009-07-09 Sampo Niskanen
468 * [BUG] Fixed imperial unit conversions
469 * [BUG] Fixed engine block icon transparency
471 2009-06-26 Sampo Niskanen
473 * Progress dialogs for file open/save
474 * File size estimate in save dialog
476 2009-06-20 Sampo Niskanen
478 * New edit motor configurations dialog
479 * Changed FreeformFinSet to throw checked exceptions
481 2009-06-11 Sampo Niskanen
483 * Added search field to motor chooser dialog
485 2009-06-09 Sampo Niskanen
487 * Released version 0.9.1
489 2009-06-08 Sampo Niskanen
491 * Fixed loading of icons from JAR
493 2009-06-06 Sampo Niskanen
495 * Cut/Copy/Paste of simulations
496 * Improved build scripts
498 2009-05-28 Sampo Niskanen
500 * Added startup check for Java 1.6 and OpenJDK
502 2009-05-28 Sampo Niskanen
504 * Fixed FixedPrecisionUnit formatting
505 * Fixed saving of transitions
506 * Fixed file dialog directory browsing
507 * Initial shift-click selects second component from figure
508 * Allow adding body components without selecting stage
510 2009-05-24 Sampo Niskanen <sampo.niskanen@iki.fi>
512 * Initial release 0.9.0