1 2011-08-08 Sampo Niskanen
3 * Enhanced one-dimensional optimization algorithm
4 * [BUG] l10n/ directory not included in source distribution
6 2011-08-07 Sampo Niskanen
8 * Optimization implementation
10 2011-07-29 Sampo Niskanen
12 * [BUG] NaN in transition radius calculation
14 2011-07-22 Sampo Niskanen
16 * Released version 1.1.6.
18 2011-07-21 Sampo Niskanen
20 * [BUG] Converting triangular fin to freeform
21 * [BUG] Unit conversions in printout
22 * [BUG] Mass computations in printout
23 * [BUG] "Not a drop" exception in ComponentTreeTransferHandler
24 * [BUG] Plot annotation positioned wrong
25 * [BUG] Exception when writing PDF failed
26 * Language selector in preferences
28 2011-07-18 Sampo Niskanen
30 * Select motor type based on known manufacturers
31 * Updated motor thrust curves from thrustcurve.org
33 2011-07-17 Sampo Niskanen
35 * Component scaling support
37 2011-07-14 Sampo Niskanen
39 * [BUG] Body tube auto-radius not enabled
40 * Optimization implementation
42 2011-06-26 Sampo Niskanen
44 * [BUG] Original rocket was modified when sim.listener modified rocket
46 2011-06-18 Sampo Niskanen
48 * Merged l10n branch into trunk, initial l10n support
50 2011-06-10 Sampo Niskanen
52 * Released version 1.1.5
54 2011-05-16 Sampo Niskanen
56 * Updated about dialog
58 2011-04-15 Sampo Niskanen
60 * Removed native printing support
62 2011-03-05 Sampo Niskanen
64 * Released version 1.1.4
66 2011-01-20 Sampo Niskanen
68 * Initial i18n support
70 2011-01-18 Sampo Niskanen
72 * [BUG] Simulation warnings were not being stored
73 * [BUG] Exclamation mark did not fit in simulation table
74 * Added instructions for zooming in plot dialog
76 2010-12-01 Doug Pedrick
78 * Merging printing support
80 2010-10-30 Sampo Niskanen
82 * [BUG] Invalid refereces to components used in caches
84 2010-10-25 Doug Pedrick
86 * [BUG] Take launch lug radial angle into account when loading rkt file
88 2010-10-24 Sampo Niskanen
90 * Added SafetyMutex and took into use in Simulation
92 2010-10-18 Sampo Niskanen
94 * Ignore Sun JRE bug in D3D
96 2010-10-09 Sampo Niskanen
98 * [BUG] Fixed conversion to freeform fin set
101 2010-10-08 Sampo Niskanen
103 * New components no longer look expandable in the component tree
105 2010-10-06 Sampo Niskanen
107 * Released version 1.1.3
109 2010-10-05 Sampo Niskanen
111 * Display comment as tooltip in component tree
112 * Limited allowed component attachments to those of the component
115 2010-10-03 Sampo Niskanen
117 * Added VBOSE logging level
119 2010-10-02 Sampo Niskanen
121 * [BUG] Exception when undoing changes
123 2010-09-27 Sampo Niskanen
125 * Implemented DnD for component tree
126 * Documented undo/redo functionality
128 2010-09-07 Sampo Niskanen
130 * Released version 1.1.2
132 2010-09-05 Sampo Niskanen
134 * [BUG] Fixed bug that prevents adding stages to a rocket
136 2010-09-04 Sampo Niskanen
138 * Added launch rod velocity to FlightData
139 * [BUG] Total velocity was measured from airspeed
141 2010-09-03 Sampo Niskanen
143 * Released version 1.1.1
145 2010-09-01 Sampo Niskanen
147 * [BUG] Fixed rocket config dialog being too large
149 2010-08-31 Sampo Niskanen
151 * Updated all thrust curves from thrustcurve.org
153 2010-08-30 Sampo Niskanen
155 * Implemented user-defined thrust curve loading
157 2010-07-30 Sampo Niskanen
159 * [BUG] Fixed motor statistic computation
160 * Finalized enhanced motor selection dialog
162 2010-07-22 Doug Pedrick
164 * [BUG] Fixed RockSim fin loading
166 2010-07-21 Sampo Niskanen
168 * Implemented enhanced motor selection dialog
169 * Background motor loading & startup time optimization
171 2010-07-20 Doug Pedrick
173 * [BUG] Exception when loading Rocksim files
175 2010-07-19 Sampo Niskanen
177 * [BUG] Various small bug fixes
179 2010-07-18 Sampo Niskanen
181 * Major refactoring of simulation code
183 2010-03-21 Sampo Niskanen
185 * Released version 1.1.0
187 2010-03-20 Doug Pedrick
189 * [BUG] Fixed RockSim design material loading
191 2010-03-20 Sampo Niskanen
193 * Minor enhancements to the logging system
194 * Updated unit tests of Rocksim file loading
196 2010-03-13 Doug Pedrick / Sampo Niskanen
198 * Initial RockSim design loading support
200 2010-03-10 Sampo Niskanen
202 * Released version 1.0.0
203 * [BUG] Removing point of freeform fin could create intersecting shape
205 2010-03-09 Sampo Niskanen
207 * Updated thrustcurves with newest curves from thrustcurve.org
208 * Updated splash screen
210 2010-03-05 Sampo Niskanen
212 * [BUG] Fixed exception for fins with small root chord
214 2010-02-26 Sampo Niskanen
216 * Simulation panel max.acceleration now from flight stage only
218 2010-02-17 Sampo Niskanen
220 * Released version 0.9.6
222 2010-01-11 Sampo Niskanen
224 * Detect out of memory condition even if masked by another exception
225 * Updated copyright year
227 2009-12-31 Sampo Niskanen
229 * [BUG] Exception when removing component listeners
230 * [BUG] OutOfMemoryError was masked when saving file
232 2009-12-30 Sampo Niskanen
234 * [BUG] "Reset" button did nothing for simulation time step
236 2009-12-29 Sampo Niskanen
238 * Update fin calculation methods for 1 and 2 fin sets
239 * Rotate rocket to worst roll angle before simulations
241 2009-12-23 Sampo Niskanen
243 * Updated time step selection methods
245 2009-12-16 Sampo Niskanen
247 * [BUG] Fixed NullPointerException in ComponentConfigDialog
249 2009-12-15 Sampo Niskanen
251 * [BUG] Illegal mapping in SimulationRunDialog
252 * [BUG] Fixed assertions in Quaternion class
254 2009-12-14 Sampo Niskanen
256 * Implemented central logging system (not taken into use yet)
258 2009-12-05 Sampo Niskanen
260 * [BUG] Fixed assertions in Quaternion class
262 2009-12-03 Sampo Niskanen
264 * [BUG] Fixed fin computation of two-fin set
266 2009-12-02 Sampo Niskanen
268 * Take into account all fins in fin-fin interference
269 * Removed 15%/6% fin dependence on lateral wind direction
271 2009-11-28 Sampo Niskanen
273 * Released version 0.9.5
274 * [BUG] NPE when clearing combo box selections
275 * Minor fixes to update checking
276 * Added a few guidance texts
278 2009-11-27 Sampo Niskanen
280 * [BUG] Fixed computing inner radius of centering ring
281 * Removed RuntimeException instantiation from all classes
283 2009-11-24 Sampo Niskanen
285 * Released version 0.9.4
287 2009-11-24 Sampo Niskanen
289 * Close original window when opening example design
291 2009-11-10 Sampo Niskanen
293 * [BUG] Fixed transition volume/mass computation
294 * [BUG] Simulations etc. using removed motor configuration IDs
296 2009-10-11 Sampo Niskanen
298 * [BUG] Sorting motor selection dialog with ',' decimal separator
300 2009-10-10 Sampo Niskanen
302 * Removed non-ASCII characters from source code files
303 * Created Chars class for non-ASCII characters
304 * Added styrofoam materials
306 2009-10-04 Sampo Niskanen
308 * [BUG] Fixed too high configuration dialogs
310 2009-10-03 Sampo Niskanen
312 * Added debug information to ant build file compilation
313 * Implemented update information fetching (client side)
315 2009-09-26 Sampo Niskanen
317 * Implemented custom material editing
319 2009-09-20 Sampo Niskanen
321 * Implemented more unit tests, fixed bugs
323 2009-09-19 Sampo Niskanen
325 * [BUG] Ignore Sun JRE bug 6828938 in ExceptionHandler
326 * Implemented non-exception throwing bug handling
327 * [BUG] Fixed unnecessary cropping for component tree names
329 2009-09-10 Sampo Niskanen
331 * [BUG] Freeform fin set shape undo not working
332 * [BUG] Conversion to freeform fin set not working
334 2009-09-08 Sampo Niskanen
336 * Allow components to be attached to tube coupler
338 2009-09-07 Sampo Niskanen
340 * Implemented fin tab save/load
342 2009-09-04 Sampo Niskanen
344 * Implemented through-the-wall fin tabs (excluding save/load)
346 2009-09-01 Sampo Niskanen
348 * Released version 0.9.3
350 2009-08-29 Sampo Niskanen
352 * Extracted motor manufacturer into separate class
353 * Started writing unit tests
355 2009-08-28 Sampo Niskanen
357 * Added icon and source info to About dialog
358 * Finalized flight event plot icons
360 2009-08-27 Sampo Niskanen
362 * Allow clicking on label to toggle checkbox in two tables
364 2009-08-21 Sampo Niskanen
366 * Showing events in non-time-domain-plots
368 2009-08-20 Sampo Niskanen
370 * Showing events in time-domain plots
372 2009-08-15 Sampo Niskanen
374 * Possibility to save user-defined materials
376 2009-08-14 Sampo Niskanen
378 * Plots ignore trailing NaN values
380 2009-08-13 Sampo Niskanen
382 * [BUG] Added fin cant for elliptical fins
384 2009-08-12 Sampo Niskanen
386 * Warning dialog when loading files
387 * [BUG] Unnecessary warnings when loading files
389 2009-08-09 Sampo Niskanen
391 * [BUG] Fixed various bugs in motor loading (e.g. mass calculation,
392 more rigorous input checking etc)
394 2009-08-08 Sampo Niskanen
396 * Refactored motor loading and "Simple XML" loading classes
397 * Implemented RockSim motor definition file loading
399 2009-08-07 Sampo Niskanen
401 * Created window icons and took into use
402 * Changed motor burn time and avg. thrust calculations to be
405 2009-08-03 Sampo Niskanen
407 * Automatic bug reporting when uncaught exceptions occur
409 2009-07-29 Sampo Niskanen
411 * Clustered inner tube splitting
412 * [BUG] Copy-pasted inner tubes shared motors
414 2009-07-28 Sampo Niskanen
416 * Opening of example rocket designs
418 2009-07-27 Sampo Niskanen
420 * [BUG] Launch lug radial position not correctly loaded
422 2009-07-26 Sampo Niskanen
424 * [BUG] Fixed unit name of ft/s^2
425 * Implemented flight data exporting
426 * [BUG] Fixed "unknown error" when opening file of zero size
427 * [BUG] Fixed exception in motor configuration name editing
429 2009-07-13 Sampo Niskanen
431 * Released version 0.9.2
433 2009-07-12 Sampo Niskanen
435 * [BUG] Better DescriptionArea based on JEditorPane
437 2009-07-09 Sampo Niskanen
439 * [BUG] Fixed imperial unit conversions
440 * [BUG] Fixed engine block icon transparency
442 2009-06-26 Sampo Niskanen
444 * Progress dialogs for file open/save
445 * File size estimate in save dialog
447 2009-06-20 Sampo Niskanen
449 * New edit motor configurations dialog
450 * Changed FreeformFinSet to throw checked exceptions
452 2009-06-11 Sampo Niskanen
454 * Added search field to motor chooser dialog
456 2009-06-09 Sampo Niskanen
458 * Released version 0.9.1
460 2009-06-08 Sampo Niskanen
462 * Fixed loading of icons from JAR
464 2009-06-06 Sampo Niskanen
466 * Cut/Copy/Paste of simulations
467 * Improved build scripts
469 2009-05-28 Sampo Niskanen
471 * Added startup check for Java 1.6 and OpenJDK
473 2009-05-28 Sampo Niskanen
475 * Fixed FixedPrecisionUnit formatting
476 * Fixed saving of transitions
477 * Fixed file dialog directory browsing
478 * Initial shift-click selects second component from figure
479 * Allow adding body components without selecting stage
481 2009-05-24 Sampo Niskanen <sampo.niskanen@iki.fi>
483 * Initial release 0.9.0