src/SDCCglobl.h: PATH_MAX is already defined in mingw32 headers

[fw/sdcc] / ChangeLog

2003-03-09  Bernhard Held <bernhard@bernhardheld.de>

        * src/SDCCglobl.h: PATH_MAX is already defined in mingw32 headers

2003-03-09  Borut Razem <borut.razem@siol.net>

        * src/SDCCglue.c: re-implemented tempfilename() and tempfile(): using mkstemp() if available
        * src/SDCCsymt.h: fixed MSVC and BORLANDC compilation (included SDCCglobl.h instead srccconf.h)
        * sdcc_vc_in.h: explicitly undefined HAVE_MKSTEMP which is not available on BORLANDC and MSVC
        * src/SDCCset.h: removed inclusion of sdccconf.h or sdcc_vc.h
        * src/SDCCglobl.h: unification of WIN32 native definitions

2003-03-09  Frieder Ferlemann <Frieder.Ferlemann@web.de>

        * src/mcs51/gen.c: applied in-/dec patch mentioned on sdcc-devel 2003-03-01

2003-03-08  Bernhard Held <bernhard@bernhardheld.de>

        * src/configure.in:   check for endianess (even while cross-compiling)
        * src/configure:      check for endianess (even while cross-compiling)
        * src/configure_in.h: check for endianess (even while cross-compiling)
        * src/avr/gen.c:        remove old endianess stuff
        * src/mcs51/gen.c:      remove old endianess stuff
        * src/ds390/gen.c:      remove old endianess stuff
        * src/pic/gen.c:        remove old endianess stuff
        * src/pic/genarith.c:   remove old endianess stuff
        * src/pic/glue.c:       fix endianess check
        * src/pic16/gen.c:      remove old endianess stuff
        * src/pic16/genarith.c: remove old endianess stuff
        * src/pic16/glue.c:     fix endianess check
        * src/xa51/gen.c:       remove old endianess stuff
        * src/z80/gen.c:        fix endianess check
        * src/SDCCglue.c:       fix endianess check
        * src/ds390/peeph.def: fix bug 700036

2003-03-08  Bernhard Held <bernhard@bernhardheld.de>

        * src/SDCCsymt.h: use appropriate data-types on host for SDCC's int and long
        * src/configure: find appropriate data-types on host for SDCC's int and long
        * src/configure.in: find appropriate data-types on host for SDCC's int and long
        * src/sdccconf_in.h: find appropriate data-types on host for SDCC's int and long
        * src/xa51/gen.c: use %d, not %ld for 4 byte variables

2003-03-07    <johan@balder>

        Just a big NOOP:
                some minor cleanups before the big shot
                OP_DEFS and OP_USES now use Kevin's protection
                new option --nolabelopt

        * src/SDCCBBlock.c:
        * src/SDCCast.c,:
        * src/SDCCcflow.c:
        * src/SDCCcse.c:
        * src/SDCCicode.c:
        * src/SDCCicode.h:
        * src/SDCClabel.c:
        * src/SDCCloop.c:
        * src/SDCCmain.c:
        * src/ds390/ralloc.c:
        * src/mcs51/ralloc.c:
        * src/pic/ralloc.c:
        * src/xa51/ralloc.c:
        * src/z80/ralloc.c:

2003-03-06  Bernhard Held <bernhard@bernhardheld.de>

        * src/pic/pcode.c (get_op): fix 64 bit warnings
        * src/pic/pcode.c (pCode2str): fix 64 bit warnings
        * src/SDCChasht.c (newHashTable): fix 64 bit warnings
        * src/SDCCsymt.c (checkTypeSanity): fix 64 bit warnings
        * support/regression/tests/malloc.c: fix 64 bit warnings

2003-03-04  Bernhard Held <bernhard@bernhardheld.de>

        * src/mcs51/gen.c (genMinus): fixed bug 696436

2003-03-02  Borut Razem <borut.razem@siol.net>

        * src/SDCCmain.c: added BORLANDC, corrected MSVC in printVersionInfo()

2003-02-26  Bernhard Held <bernhard@bernhardheld.de>

        * configure.in: test for mkstemp
        * sdccconf_in.h: add HAVE_MKSTEMP

2003-02-24  Bernhard Held <bernhard@bernhardheld.de>

        * device/include/ctype.h: removed warning while using --stack-auto
        * device/include/malloc.h: removed warning while using --stack-auto
        * device/include/string.h: removed warning while using --stack-auto

2003-02-23  Borut Razem <borut.razem@siol.net>

        * src/asm.h: corrected assertion in function printILine(): _pipe() was not executed on MSVC,
        because NDEBUG is defined (see man assert)
        * sdcc_vc_in.h: vsnprintf is defined as _vsnprintf on MSVC

2003-02-23  Frieder Ferlemann <Frieder.Ferlemann@web.de>

        * src/mcs51/gen.c (genUminusFloat): avoided dptr in-/decrement for xdata variables
        * src/mcs51/peeph.def: added rule suggested by Gernot Fink, white space/comment changes

2003-02-18  Frieder Ferlemann <Frieder.Ferlemann@web.de>

        * src/SDCCpeeph.c: added peephole conditions testing for same arguments
        * src/mcs51/peeph.def: added rules 238a-d which remove redundant moves

2003-02-18    <johan@balder>

        * as/mcs51/asmain.c (asmbl): module can start with a digit
        * as/z80/asmain.c (asmbl): module can start with a digit

2003-02-16  Bernhard Held <bernhard@bernhardheld.de>

        * sim/ucsim/mkecho: inserted #!/bin/sh for Cygwin, so that it's executable
        * src/asm.c: fix pipe() for Mingw32

2003-02-15  Bernhard Held <bernhard@bernhardheld.de>

        * src/SDCCglue.h: make tmpfileNameSet available for preOutName
        * src/SDCCmain.c (preProcess): make sure, that preOutName will be deleted;
        make -V work again; --c1mode reads now from stdin
        * doc/sdccman.lyx: added --c1mode
        * support/Util/SDCCerr.c: new messages for c1 mode
        * support/Util/SDCCerr.h: new messages for c1 mode
        * src/SDCC.lex (checkCurrFile): test if fullSrcFileName is NULL for c1mode

2003-02-15    <johan@balder>

        * src/asm.c: new options: --no-c-code-in-asm and --i-code-in-asm

2003-02-14  Bernhard Held <bernhard@bernhardheld.de>

        * doc/sdccman.lyx: Environment variables, -o and other minor things

2003-02-14    <johan@balder>

        * src/xa51/main.c: before anyone really tries to use it :)

        * Install doc's in share/sdcc/doc
        * removed some obsolete files
        * Do a proper make distclean and uninstall
        M Makefile.common.in
        R sdccbuild.sh
        M as/Makefile
        M device/include/Makefile.in
        M device/lib/Makefile.in
        M doc/sdccman.lyx
        M link/Makefile
        M sim/ucsim/doc/Makefile.in
        M src/clean.mk
        R src/avr/peeph.rul
        R src/xa51/peeph.rul
        M support/cpp2/Makefile.in
        M support/makebin/Makefile


2003-02-13  Bernhard Held <bernhard@bernhardheld.de>

        * support/regression/ports/host/spec.mk: use cc as host compiler for max osx

2003-02-10  Borut Razem <borut.razem@siol.net>

        * doc/bccinst.txt, packihx/packihx.c, sdcc_vc_in.h, src/SDCCset.h,
        support/cpp2/config.in: Borland C++ build doesn't depend on Cygwin configure
        * Bcc.ini, Makefile.bcc, as/mcs51/Makefile.bcc,
        device/examples/ds390/tinitalk/Makefile.bcc, packihx/Makefile.bcc,
        support/cpp2/Makefile.bcc, src/Makefile.bcc, src/avr/Makefile.bcc,
        src/ds390/Makefile.bcc, src/izt/Makefile.bcc, src/mcs51/Makefile.bcc,
        src/pic/Makefile.bcc, src/pic16/Makefile.bcc, src/xa15/Makefile.bcc,
        src/z80/Makefile.bcc: Borland Makefile cleanup
        * as/z80/Makefile.bcc: Added Borland Makefile
        * support/cpp2/borland.h: Removed

2003-02-10  Bernhard Held <bernhard@bernhardheld.de>

        * doc/sdccman.lyx: new pragma NOIV by "Johannes Stezenbach" <js@convergence.de>
        * src/SDCC.lex: new pragma NOIV
        * src/SDCCglobl.h: new pragma NOIV
        * src/SDCCmem.c: new pragma NOIV

2003-02-09  Bernhard Held <bernhard@bernhardheld.de>

        * src/SDCCmain.c: signal handling is switched off by SDCC_LEAVE_SIGNALS

2003-02-09  Bernhard Held <bernhard@bernhardheld.de>

        * src/SDCCmain.c: signal handling is switched off by --debug
        * doc/Makefile: small fix for install; use clean.mk again
        * doc/clean.mk: clean *.pdf and *.html too

2003-02-08  Bernhard Held <bernhard@bernhardheld.de>

        * device/lib/_mulint.c: small fix for large/ds390 --int-long-reent resp. --stack-auto
        * device/lib/printfl.c: fix a ds390 bug by making it portable
        * src/SDCCsymt.c (initCSupport): fix compile warning on Cygwin
        * src/SDCCopt.c (cnvToFloatCast): fix compile warning on Cygwin
        * src/SDCCopt.c (cnvFromFloatCast): fix compile warning on Cygwin
        * debugger/mcs51/cmd.c: converted multi-line string literals
        * sim/ucsim/globals.cc: converted multi-line string literals
        * src/SDCCmain.c: introduced signal handler to remove temp files
        * doc/Makefile: small tweaks, implement clean
        * doc: removed generated files

2003-02-05  Jesus Calvino-Fraga <jesusc@ece.ubc.ca>

        * as/mcs51/aslink.h, as/mcs51/lkihx.c, as/mcs51/lkrloc.c:  Applied
        patch from Jan Rejlek <jr@apex-lib.cz> to fix Bug 677692: "Extended
        Address Record is not correctly generated for DS390."

2003-02-02  Borut Razem <borut.razem@siol.net>

        * Makefile.bcc: removed non existing cpp project and non compilable izt project from makefile
        * as/mcs51/asm.h: fixed compilation with Borland C
        * support/cpp2/Makefile.bcc: added rule to generate auto-host.h
        * support/cpp2/auto-host_vc_in.h: fixed compilation with Borland C
        * src/mcs51/mcs51a.dsp: corrected misspelled project name from msc51a to mcs51a
        * src/avr/Makefile.bcc, src/ds390/Makefile.bcc, src/izt/Makefile.bcc,
        src/mcs51/Makefile.bcc, src/pic16/Makefile.bcc, src/xa51/Makefile.bcc,
        src/z80/Makefile.bcc: delete $(LIB) only if exist
        * src/Makefile.bcc, src/pic/Makefile.bcc:  fixed compilation with Borland C

2003-02-02  Bernhard Held <bernhard@bernhardheld.de>

        * device/include/malloc.h: introduced NULL
        * device/include/string.h: introduced NULL
        * device/include/stdlib.h: introduced NULL
        * device/lib/_memcpy.c: removed NULL
        * device/lib/_strcat.c: removed NULL
        * device/lib/_strchr.c: removed NULL
        * device/lib/_strcmp.c: removed NULL
        * device/lib/_strcpy.c: removed NULL
        * device/lib/_strcspn.c: removed NULL
        * device/lib/_strlen.c: removed NULL
        * device/lib/_strncat.c: removed NULL
        * device/lib/_strncmp.c: removed NULL
        * device/lib/_strncpy.c: removed NULL
        * device/lib/_strpbrk.c: removed NULL
        * device/lib/_strrchr.c: removed NULL
        * device/lib/_strspn.c: removed NULL
        * device/lib/_strstr.c: removed NULL
        * device/lib/_strtok.c: removed NULL
        * device/lib/malloc.c: removed NULL, include own header

2003-02-02    <johan@balder>

        * src/mcs51/ralloc.c (packForPush): fixed bug #631653, maybe other ports need this too? At least now some new alerts in SDCCBBlock.c and SDCCicode.c gives an early warning
        * support/regression/fwk/lib/testfwk.c: div and mod isn't broken anymore
        * regressions ds390/spec.mk and mcs51/spec.mk (timeout): my good old balder isn't fast enough for some tests
        * src/z80/gen.c (genZ80Code): added c-lines in asm comments
        * as/z80/asm.h (NINPUT): increased for long c-comments in regression tests
        * src/z80/gen.c (genRightShiftLiteral): fixed the (char)(-3)>>8 (I think)

2003-02-01  Jesus Calvino-Fraga <jesusc@ece.ubc.ca>

        * src/SDCCmain.c: Fixed bug 678574: "ds390: ASlink-Error-Stack overlaps
        area 'DATA'"

2003-02-01    <johan@balder>

        * src/SDCCval.c (valBitwise): fixed Karl's "2 | (1<<8)"

2003-01-31    <johan@CP255758-A>

        * src/ds390/main.c (_ds390_genAssemblerPreamble): applied Jan Rejlek's >64K startup patch

2003-01-30    <johan@balder>

        * src/SDCCBBlock.c: automatic bug detection
        * src/SDCCicode.c: automatic bug detection

2003-01-29  Jesus Calvino-Fraga <jesusc@ece.ubc.ca>

        * src/SDCCglobl.h:   now --xram-size 0 works
        * src/SDCCmain.c:    now --xram-size 0 works

2003-01-29    <johan@balder>

        * src/almosteverything: changed OP_DEFS and OP_USES from macros to functions to catch symbol abuse (a hot topic in the bug list :)

2003-01-29  Jesus Calvino-Fraga <jesusc@ece.ubc.ca>

        * as/mcs51/aslink.h: Added options --xram-size and --code-size 
        * as/mcs51/lkdata.c: Added options --xram-size and --code-size 
        * as/mcs51/lkmain.c: Added options --xram-size and --code-size 
        * as/mcs51/lkmem.c:  Added options --xram-size and --code-size 
        * src/SDCCglobl.h:   Added options --xram-size and --code-size 
        * src/SDCCmain.c:    Added options --xram-size and --code-size 

2003-01-28  Bernhard Held <bernhard@bernhardheld.de>

        * src/ds390/gen.c: fix deps by replacing <common.h> with "common.h"
        * src/SDCC.lex: rename P_OVERLAY to P_OVERLAY_ for cross-gcc 3.2 MINGW32

2003-01-27    <johan@balder>

        * src/SDCC.y: fixed bug #613764

2003-01-26    <johan@balder>

        * src/SDCClrange.c:  fixed Bernhard's "char * code ptr = &c"
        * src/SDCCsymt.h: fixed bug #673374
        * src/SDCCglue.c: fixed bug #661910
        * src/SDCCast.c: fixed bug #458099 and 673374

2003-01-26  Bernhard Held <bernhard@bernhardheld.de>

        * as/mcs51/strcmpi.c: added, provides Aurelien Jarno's as_strcmpi(); strcmpi() is not ANSI
        * as/mcs51/strcmpi.h: added
        * as/mcs51/asm.h: remove ugly "#define strcmpi strcmp"
        * as/mcs51/aslink.h: remove ugly "#define strcmpi strcmp"
        * as/mcs51/asmain.c: strcmpi -> as_strcmpi
        * as/mcs51/assym.c: strcmpi -> as_strcmpi
        * as/mcs51/lkmem.c: strcmpi -> as_strcmpi
        * as/mcs51/lknoice.c: strcmpi -> as_strcmpi
        * as/mcs51/lksym.c: strcmpi -> as_strcmpi
        * as/mcs51/Makefile.aslink: new module strcmpi
        * as/mcs51/Makefile.asx8051: new module strcmpi
        * as/mcs51/Makefil.bcc: new module strcmpi
        * as/mcs51/Makefile.in: new module strcmpi
        * sim/ucsim/s51.src/uc390.cc (get_mem_size): make RAM big enough for tinibios

2003-01-26    <johan@balder>

        * src/SDCCglue.c: reverted back to 1.124
        * src/SDCCast.c: reverted back to 1.156
        * src/mcs51/gen.c (aopGet): applied Frieder's efficiency patch

2003-01-25    <johan@balder>

        * src/SDCCglue.c: A better fix for bug #661910
        * src/SDCCast.c: A better fix for bug #661910
        * src/SDCCglue.c (emitRegularMap): That was a little too efficient

2003-01-24  Bernhard Held <bernhard@bernhardheld.de>

        * src/Makefile.in: remove spawn.o
        * src/SDCCmain.c: remove spawn.h
        * src/SDCCmain.c (printVersionInfo): report MINGW32 instead of UNIX
        * src/spawn.c: removed
        * src/spawn.h: removed
        * support/regression/ports/ds390/spec.mk: link with -r

2003-01-24    <johan@CP255758-A>

        * src/ds390/gen.c (aopOp): fixed bug #667458
        * src/SDCCglue.c (emitRegularMap): fixed bug #458099 again
        * src/SDCCast.c (createIvalCharPtr): fixed bug #661910
        (createIvalCharPtr): an ival doesn't always have a storage class anymore

2003-01-24  Bernhard Held <bernhard@bernhardheld.de>

        * src/mcs51/peeph.def: better assembler identation by Frieder
        * src/mcs51/gen.c: better assembler identation by Frieder

2003-01-22  Bernhard Held <bernhard@bernhardheld.de>

        * as/z80/string.h: removed for gcc 3.2
        * support/makebin/makebin.c: #include <string.h> for gcc 3.2
        * src/pic/pcode.c (get_op_from_instruction): fix concatenation of string literals with __FUNCTION__ for gcc 3.2

2003-01-19  Bernhard Held <bernhard@bernhardheld.de>

        * src/SDCCmain.c (linkEdit): rename mem and map files even in case of failure
        * src/SDCCpeeph.c (replaceRule): fix bug #663503
        * support/regression/Makefile: separate temp files for ports
        * support/regression/generate-cases.py: separate temp files for ports
        * src/mcs51/peeph.def: Frieder: removed 237 (obsolete by 236g and 105); added 237 a/b
        * src/ds390/peeph.def: Frieder: removed 237 (obsolete by 236g and 105); added 237 a/b

2003-01-19  Bernhard Held <bernhard@bernhardheld.de>

        * moved tinitalk to device/examples/ds390

2003-01-14  Bernhard Held <bernhard@bernhardheld.de>

        * as/mcs51/lkmem.c: rflag is for DS390
        * src/SDCCglobl.h: removed out_name and options stackOnData, genericPtr
        * src/SDCCmain.c (optionsTable, setDefaultOptions): removed --stack-after-data and --generic
                         (linkEdit): move mem- and map-files the same way as ihx-files
        * src/z80/main.c (_setDefaultOptions): removed --generic
        * src/SDCCmain.c (_processC1Arg, parseCmdLine, main): --c1mode works again
        * src/SDCCglue.c (createInterruptVect, glue): --c1mode works again
        * src/pic/glue.c (picglue): --c1mode works again
        * src/pic16/glue.c (pic16glue): --c1mode works again
        * src/asm.c (printCLine): fix #660034

2003-01-13  Bernhard Held <bernhard@bernhardheld.de>

        * src/ds390/peeph.def: fix #123; add 14 rules by Fiorenzo D. Ramaglia <fd.ramaglia@tin.it>, 1 by Frieder
        * src/mcs51/peeph.def: fix #123; add 14 rules by Fiorenzo, 1 by Frieder
        * src/mcs51/gen.c (genFunction): emit r0 instead of ar0 by Fiorenzo
        * as/mcs51/lkmem (summary): better fix for sp problem
        * src/SDCCglue.c (glue): __start_stack - 1, saves 1 byte!
        * src/ds390/main.c (_ds390_finaliseOptions, _tininative_finaliseOptions): stack_loc = 0x400008
        * support/regression/ports/*/spec.mk: moving testfwk-object to port dir allow parallel execution of regression tests
                                              remove --stack-after-data

2003-01-12  Bernhard Held <bernhard@bernhardheld.de>

        * src/SDCCmain.c (main): port->finaliseOptions() moved for z80 linking
        * src/SDCCutil.c (join): ugly bug: missing '\0'
        * as/mcs51/lkmem.c (summary): sp on address 7 is safe

2003-01-11  Bernhard Held <bernhard@bernhardheld.de>

        * src/SDCCmain.c (assemble, linkEdit): preparations for -o
        * src/port.h: typo
        * src/pic/main.c (_asmCmd): gpasm supports -o
        * src/z80/main.c: more general macros
        * device/lib/Makefile.in: remove intermediate files

2003-01-11  Bernhard Held <bernhard@bernhardheld.de>

        * .version: Bumped version number to 2.3.3
        * src/SDCCBBlock.c: new option -o
        * src/SDCCglobl.h: new option -o
        * src/SDCCglue.c: new option -o
        * src/SDCCmain.c: new option -o
        * src/asm.c: new option -o
        * src/ds390/main.c: new option -o
        * src/pic/glue.c: new option -o
        * src/pic/pcode.c: new option -o
        * src/pic/ralloc.c: new option -o
        * src/pic16/glue.c: new option -o
        * src/pic16/pcode.c: new option -o
        * src/pic16/ralloc.c: new option -o
        * src/z80/main.c: new option -o
        * device/lib/Makefile.in: use -o
        * support/regression/ports/ds390/spec.mk: use -o
        * support/regression/ports/gbz80/spec.mk: use -o
        * support/regression/ports/mcs51/spec.mk: use -o
        * support/regression/ports/mcs51-stack-auto/spec.mk: use -o
        * support/regression/ports/z80/spec.mk: use -o
        * support/regression/ports/ucz80/spec.mk: use -o
        * support/regression/ports/xa51/spec.mk: use -o
        * support/regression/fwk/lib/timeout.c: fix usage string

2003-01-09  Bernhard Held <bernhard@bernhardheld.de>
        * src/mcs51/gen.c (genPlus): replaced "mov b,acc" by "mov b,a" Fiorenzo D. Ramaglia <fd.ramaglia@tin.it>
        
2003-01-07    <johan@balder>

        * src/SDCCast.c (decorateType): fixed bug #600035

2003-01-07  Bernhard Held <bernhard@bernhardheld.de>
        * as/mcs51/lkmem.c: added several l-modifiers to printf to remove warnings
        * as/mcs51/lkaomf51.c: #include <ctype.h> to remove warnings
        * src/pic/main.c (_hasNativeMulFor): outcommented unused variables to remove warnings
        * src/pic/pcode.c: outcommented unused variable to remove warnings
        * src/pic/ralloc.c: outcommented unused variable to remove warnings

2003-01-06    <karl@turbobit.com>
        * sim/ucsim/cmd.src/command.cc: fixed so "break xram r 0x7654" works again in
   regression tests.

2003-01-06    <johan@balder>

        * src/SDCCicode.c: fixed array add

2002-01-05  Bernhard Held <bernhard@bernhardheld.de>
        * src/SDCCmacro.c: MAX_STRING_LENGTH increased to 2048; was too small for regression tests
        * support/regression/ports/host/support.c: #include <stdarg.h> for gcc 3.2

2003-01-04    <johan@balder>

        * src/SDCCval.c (getNelements): fixed the initialized array of structures

2002-12-29  Jesus Calvino-Fraga <jesusc@ece.ubc.ca>
        * as/mcs51/Makefile.bcc: fixed typo lkomf51.o -> lkaomf51.o

2002-12-28  Bernhard Held <bernhard@bernhardheld.de>
        * src/mcs51/peeph.def: added rules 234 and 235 from Frieder Ferlemann <frieder.ferlemann@web.de>
        * support/regression/tests/bug-524697.c: fit mem usage into 8032

2002-12-28  Bernhard Held <bernhard@bernhardheld.de>
        * src/mcs51/gen.c (aopGetUsesAcc): inserted missing "return FALSE"

2002-12-27  Bernhard Held <bernhard@bernhardheld.de>
        * as/mcs51/Makefile.in: fixed typo lkomf51.o -> lkaomf51.o

2002-12-26  Bernhard Held <bernhard@bernhardheld.de>
        * src/mcs51/main.c: removed {bindir}{sep} from aslink

2002-12-10  Jesus Calvino-Fraga <jesusc@ece.ubc.ca>

    * in \sdcc\as\mcs51\ changed these files in order to create an
    aomf51 file: aslink.h, lkdta.c, lklex.c, lklibr.c, lklist.c,
    lkmain.c.  Also added: lkmem.c and lkaomf51.c.  Changed the 
    following files to include the previous two files: aslink.dsp,
    Makefile.aslink, Makefile.bcc, and Makefile.in.

    * Changed \sdcc\src\SDCCmain.c so it creates files with extension
    .adb instead of .cdb
    
2002-11-09  Jesus Calvino-Fraga <jesusc@ece.ubc.ca>

        * \sdcc\as\mcs51\lklist.c: Now reports memory usage using the
        value from option --iram-size.

2002-09-20  Jesus Calvino-Fraga <jesusc@ece.ubc.ca>

        * \sdcc\as\mcs51\lklist.c: added boundary check before using
        dram[] array.

2002-09-18    <wiml@hhhh.org>

        * SDCClrange.h: exposed setFromRange() and setToRange()
        * mcs51/ralloc.c: fixed over-eager packRegsForSupport() and
          packRegsForAccUse() (bug 542397)
        * mcs51/gen.c: MOVA() is now a function to avoid calling aopGet()
          multiple times and emitting the fetch operations more than once
          added aopGetUsesAcc() function to allow binary operators to
          fetch their operands in the correct order; made genMinus() emit
          compact code for X = LITERAL - Y 

2002-09-00  Jesus Calvino-Fraga <jesusc@ece.ubc.ca>
        * \sdcc\as\mcs51\lklist.c: Fixed incorrect number of parameters to
        sprintf() in line 1267.

2002-09-08  Jesus Calvino-Fraga <jesusc@ece.ubc.ca>
        * \sdcc\src\SDCCglue.c: Generate areas REG_BANK_[0-3] only for 8051
        like ports.

2002-09-04  Jesus Calvino-Fraga <jesusc@ece.ubc.ca>
        Changes to aslink (All the changes are marked with 'JCF'):

        * \sdcc\as\mcs51\aslink.h: External definition of sflag and
        summary().

        * \sdcc\as\mcs51\lkarea.c: Computes the size of area BSEG_BYTES from
        area BSEG.  Also moves, if possible, the DATA area down into the internal
        ram so more space is available.

        * \sdcc\as\mcs51\lkdata.c: Definition of memory summary output flag
        sflag.

        * \sdcc\as\mcs51\lklist.c: For the BSEG area report the size in bits,
        not bytes.  Function summary() which creates a memory usage summary
        file with extension .mem.  Reports of overlaping stack and small stack
        size.  If the space for the stack is less than 16 bytes aslink trows a
        warning.
        
        * \sdcc\as\mcs51\lkmain.c: Creation of some of the default areas for
        the 8051.  Option 'y' for memory summary output file.

        Changes to sdcc (All the changes are marked with 'JCF'):

        * \sdcc\src\SDCCglobl.h: External definition of RegBankUsed[4].

        * \sdcc\src\SDCCglue.c:  If a register bank is used, creates an
        overlaying area for it (uses RegBankUsed[4]).

        * \sdcc\src\SDCCmain.c: Definition RegBankUsed[4]; marks register
        bank zero as used by default.  By default aslink locates the stack
        (equivalent to --stack-after-data).  Pass option 'y' to aslink for
        the creation of the .mem file.  Delegates the allocation of data area
        to aslink (it is not longer 0x30 by default).  If --stack-loc passes
        the begining of the stack area to aslink.

        * \sdcc\src\SDCCmem.c:  If a register bank is used, marks it so
        glue() in SDCCglue.c creates an area for it.
        
2002-09-03  Borut Razem <borut.razem@siol.net>
        * sdcc/src/SDCCglue.c, sdcc/src/SDCCglue.h, sdcc/src/SDCCmain.c,
        sdcc/src/pic/glue.c:
        introduced atexit() handler for teporay files removal in case of
        errors, assertions, ...

2002-08-29  Borut Razem <borut.razem@siol.net>
        * sdcc/support/cpp2/auto-host_vc_in.h:
        re-definition of O_BINARY and other O_XXX as _O_BINARY and _O_XXX, so the problem
        with the returned value from read() in sdcc/support/cpp2/cppfiles.c is solved for MSC.
        Maybe there is a similar problem with BORLANDC? It should be checked!

        * sdcc/src/ds390/ralloc.c, sdcc/src/mcs51/ralloc.c, sdcc/src/z80/ralloc.c:
        corrected improper use of assert: the assignment to clr variable was done inside the assert.
        In case that NDEBUG was defined, the assert macro was substituted with no-op, so the assignment
        was not executed, and the compiler (cl) launched a warning:
        ralloc.c(1442) : warning C4700: local variable 'clr' used without having been initialized

2002-08-28  Bernhard Held <bernhard@bernhardheld.de>
        * src/SDCCglue.c (printIvalArray): iterative calculation of array length

2002-08-28  Jesus Calvino-Fraga and Borut Razem <borut.razem@siol.net>
        * sdcc/sdcc.dsw: added sdcpp, sdcppa, yacc, conf projects

        * sdcc/src/src.dsp, sdcc/src/avr/avr.dsp, sdcc/src/ds390/ds390.dsp,
          sdcc/src/mcs51/mcs51.dsp, sdcc/src/pic/pic.dsp, sdcc/src/z80/z80.dsp,
          sdcc/src/xa51/xa51.dsp, sdcc/src/avr/avra.dsp,
          sdcc/src/ds390/ds390a.dsp, sdcc/src/mcs51/mcs51a.dsp,
          sdcc/src/pic/pica.dsp, sdcc/src/z80/z80a.dsp,
          sdcc/src/xa51/xa51a.dsp, sdcc/as/as_z80.dsp,
          sdcc/as/aslink.dsp, sdcc/as/asx8051.dsp, sdcc/packihx/packihx.dsp:
        - added Release configuration in VS projects
        - review of compiler an linker options
        - VC .exe files are generated in bin_vc directory, not to interfere
          with binaries generated from other projects (cygwin, mingw, bcc ...)

        * sdcc/src/yacc.dsp: added

        * sdcc/config.dsp, sdcc/configure_vc.awk, sdcc/sdcc_vc_in.h:
        added - genarate sdcc_vc.h using sdcc_vc_in.h as template
        and insert the version number definitions from .version 

        * sdcc/support/cpp2/sdcpp.dsp: added - VC project for sdcpp

        * sdcc/support/cpp2/sdcppa.dsp, sdcc/support/cpp2/auto-host_vc_in.h:
        added - genarate auto-host.h using auto-host_vc_in.h as template

        * sdcc/sdcc_vc.h,
        removed from CVS, generated automatically

2002-08-25  Bernhard Held <bernhard@bernhardheld.de>
        * support/scripts/inc2h.pl: use gputils or gpasm (from Nathan Hurst)

2002-08-11  Borut Razem <borut.razem@siol.net>
        * support/Util/NewAlloc.c: removed unneeded #include "sdccconf.h" (suggested by Jesus Calvino-Fraga)

2002-08-10  Borut Razem <borut.razem@siol.net>
        * src/SDCCmain.c (main):
        file preOutName was unlinked before closed. This seems to be OK on UNIX and cygwin
        platforms, but it doesn't work with Visual Studio: the opened file can not be removed.
        The consequence was that some temporary files were not removed.

        * src/SDCCglue.c:
        unification of code in functions tempfilename() and tempfile():
        function tempnam() is defined in Visual Studio 6.0 and .NET

        * sdcc/sdcc.dsw: removed project sdcpp, added project xa51a

        * sdcc/src/src.dsp, sdcc/src/avr/avr.dsp, sdcc/src/ds390/ds390.dsp,
          sdcc/src/mcs51/mcs51.dsp, sdcc/src/pic/pic.dsp, sdcc/src/z80/z80.dsp:
        - removed compiler command line option /WX: Treats all warnings as errors
        - update a list of source files, included into the project

        * sdcc/src/avr/avra.dsp, sdcc/src/ds390/ds390a.dsp, sdcc/src/mcs51/mcs51a.dsp,
          sdcc/src/pic/pica.dsp, sdcc/src/z80/z80a.dsp:
        changed project type to Generic Project so that can be correcly converted to VS.NET project

        * sdcc/as/mcs51/asm.h: definition of PATH_MAX for MSC

        * sdcc/src/SDCCast.c: solved MSC error in function decorateType()

        * sdcc/src/SDCC.y: added missing ending ';' to rules to get rid of bison warnings

        * dcc/src/ds390/ralloc.c, sdcc/src/mcs51/ralloc.c:
        added return 0 statements after assert() to make compiler happy

        * sdcc/src/xa51/peeph.rul, sdcc/src/xa51/peeph.def, sdcc/src/z80/ralloc.c:
        added newline in the def file to keep MSC compiler satisfied

        * sdcc/src/z80/gen.c:
        - function strcasecmp() is not defined in MSC (and probably also in BORLANDC),
          so it is replaced with STRCASECMP, which is defined as stricmp in case of MSC and BORLANDC
        - solved MSC error in function aopDump()

        * sdcc_vc.h: define PREFIX as "\\sdcc"

2002-07-18  Bernhard Held <bernhard@bernhardheld.de>
        * src/SDCCast.c (decorateType): fixed access to array of structures http://sourceforge.net/mailarchive/forum.php?thread_id=902690&forum_id=4107

2002-06-22  Scott Dattalo <scott@dattalo.com>
        * src/pic/*: Numerous bug fixes. Flow analysis has been enhanced. 
        - Rewrote the register banking algorithm. 
        - Added pCode live-range analysis to registers (for now, only non-used and 
        singly-used registers optimized away)

        * src/pic/pcoderegs.[ch]: Added new files for pCode live-range analysis

        * support/scripts/inc2h.pl Kevin L. Pauba <klpauba@cox.net> submitted this perl script for converting MicroChip include files into SDCC Pic include files.
        
2002-05-10  Scott Dattalo <scott@dattalo.com>
        * src/pic/*: Added support for multiplication. Fixed many,many bugs.
        
2002-04-22  Michael Hope  <michaelh@vroom>

        * device/lib/z80/printf.c: Changed emitter to volatile to work around a pcall bug.

        * configure.in (DD_COPT): Added include support required for gbdk.

        * .version: Bumped version number just to increase it.

        * src/SDCCmain.c: Added -nostdinc to the default options.

2002-04-15  Michael Hope  <michaelh@vroom>

        * device/lib/z80/printf.c (sprintf): Added.

        * src/z80/ralloc.c (packRegisters): Disabled pack HL use for GB as it's broken.

        * src/z80/peeph.def: Added transpose redundent load rule.

        * src/z80/main.c: Added force callee saves for jaune.

        * src/port.h: Removed the i186 and tlcs-900h ports as they weren't being being developed.

        * src/SDCCmain.c: Pulled the options definition out so that you can add port specific options without changing the main file.

2002-03-28  Johan Knol  <johan@balder>

        * src/SDCCval.c: fixed bug #532436

2002-03-14  Scott Dattalo <scott@dattalo.com>
        * /src/port.h:
        Added "char *Processor" field to the port structure.

        * /src/SDCCmain.c:
        Added -p option. Allows port dependent processor to be specified.

        * all ports:
        Initialized the new field char *Processor field to NULL in all ports

        * /src/pic/*:
        Compiler generated registers for interrupt context saving
        were not getting allocated.
                
2002-03-16  Sandeep Dutta  <sandeep@ddi.com>

        * /src/SDCCast.c:
        Fixed left shift. Will promote the left side of a left shift
        if a) left shifting more than size of operand or b) when assigned
        to something size > size of left side

2002-03-14  Scott Dattalo <scott@dattalo.com>
        * src/pic/*
        tons of changes. Register allocation has been 
        rewritten. Added customization for the various PICs. Flow
        analysis is restructured. ...

        * src/pic/device.h:
        Added

        * src/pic/device.c:
        Added. device.c is a PIC port hack to accomodate variations
        in PIC devices.

2002-03-13  Michael Hope  <michaelh@vroom>

        * src/z80/gen.c (genGenPointerGet): Fixed a bug where a pointer in HL is dereferenced into HL but HL is not spilled.  Yeah.

2002-03-04  johanknol  <johanknol@manik>

        * /src/SDCCval.c: fixed

        const unsigned char arr[][2] = { { 0, 1 } };
        t18.c:1: error: Initializer element is not constant

2002-03-04  bela  <bela@manik>

        * /device/include/mcs51reg.h:
        ds89c420 register definition update

2002-03-03    <johan@FRIJA>

        * support/Util/SDCCerr.c: did something, but don't no why anymore

        * support/regression/tests/bug-524691.c: made it a little less shy 

        * src/SDCCast.c (decorateType): fixed bug #524697

        * src/SDCCast.c: made some lineno improvements

        * src/SDCCval.c (getNelements): changed warning to error

        * src/SDCCglue.c (printIvalArray): changed warning to error

        * src/SDCCicode.c: fixed a warning for mingw

        * src/SDCCast.c (decorateType): fixed the << promotion for ops

        * src/SDCCicode.c (geniCodeDivision): divide is shift only for unsigned (bug #524685)

2002-03-02  Sandeep Dutta  <sandeep@ddi.com>

        * src/ds390/peeph.def:
        Added some more peephole rules

        * src/ds390/gen.c: Various fixes & enhancements

        * src/SDCClrange.c, src/SDCClrange.h:
        functions "alldefsoutofrange" and "notusedinblock" moved to SDCClrange.c

        * src/ds390/ralloc.c:
        various fixes & enhancements (ds390) specific

        * src/avr/ralloc.c, src/mcs51/ralloc.c, src/pic/ralloc.c, src/xa51/ralloc.c, src/z80/ralloc.c:
        Functions "allDefsOutOfRange" & "notUsedinBlock" moved to SDCClrange.c
        from rallocs.

        * sdcc/src/SDCCcse.c: Better fix for bug # 514308

2002-03-02    <johan@FRIJA>

        * src/SDCCast.c (decorateType): fixed bug #524708

        * src/SDCCval.c (floatFromVal): fixed the literal void (whatever that may be)

        * src/SDCCicode.c (geniCodePtrPtrSubtract): fixed bug #524691

2002-03-01  Michael Hope  <michaelh@vroom>

        * src/SDCCsymt.c (initCSupport): Removed managling of support function names.

        * src/z80/ralloc.c (packRegsForIYUse): Fixed fp bug where four byte operands were packed into IY.

2002-03-01    <johan@FRIJA>

        * src/SDCCglue.c (printIvalPtr): fixed bug #524211

        * src/SDCCast.c (decorateType): fixed bug #524209

        * src/SDCCval.c (valNot): fixed bug #524195

2002-02-26    <johan@balder>

        * src/xa51/gen.c: fixed a warning

        * src/SDCCglue.c (printIvalFuncPtr): fixed bug #522534

        * src/SDCCast.c (decorateType): fixed bug #522534

2002-02-23    <johan@balder>

        * src/SDCCdflow.c (computeDataFlow): fixed bug #460088

2002-02-22    <johan@balder>

        * src/SDCCast.c: fixed bug #514865

        * src/SDCCy.c ("SDCC.y"): fixed bug #516625

2002-02-21  Sandeep Dutta  <sandeep@ddi.com>

        * sdcc/src/SDCCloop.c:
        Previous fix was not good. basic blocks that have "break" or "return" are
        not really partof a loop , but live ranges used in these blocks should
        be live thru the entire loop, so set partOfLoop but don't add them to
        loop region

2002-02-21    <johan@FRIJA>

        * src/SDCCcse.c: fixed bug #514308

2002-02-20  Sandeep Dutta  <sandeep@ddi.com>

        * src/SDCCloop.c:
        Fixed BUG #519583. If a conditional block ended in a return/break
        statement inside a loop, it was not being considered part of the loop.

        * src/SDCCcflow.c: Removed fix (Fixed in SDCCloop.c)

2002-02-10  Karl Bongers <karl@turbobit.com>

        * debugger/*:
        Fixed up SDCDB debugger somewhat.  Updated debugger/README
        with lots of comments and notes.

        * device/examples/test2.c:
        Fix bug, "red" variable not being initialized(compiler complained).

        * device/examples/Makefile, examples/test3.c:
        Add Makefile in device/examples folder, compiles test3.c
        for use as a multiple module SDCDB test case.

        * sim/ucsim/cmd.src/cmdset.cc:
        Took out debug printfs in ucsim "next" command.

        * sim/ucsim/xa.src:
        Karl and Johan start ucsim XA support.  Most dissassembly working,
        about 75% emulation done(plenty of work remaining).

        * sim/ucsim/z80.src:
        Add Z80 support to ucsim, add test-ucz80 regression test,
        notice ucsim/z80 emulation fails on examples/test3.c/itoa code.
        Notice z80 compiler fails on examples/test3.c/crc code.

2002-01-30  Sandeep Dutta  <sandeep@ddi.com>

        * src/mcs51/gen.c, src/mcs51/main.c, src/mcs51/ralloc.c:
        Added support for --parms-in-bank1

        * src/ds390/peeph.def:
        added a few more peephole optimzations

        * src/ds390/main.c:
        1) added __builtin_inp & __builtin_outp used to read in data of given length
           from a memory mapped port
        2) added __builtin_memcmp
        3) added __builtin_swapw swap bytes of a short

        * src/ds390/gen.c, src/ds390/gen.h, src/ds390/ralloc.c:
        1) handle multiple send & receives from register bank1
        2) ralloc can now allocate DPTR1 to some liveRanges

        * src/SDCCsymt.c, src/SDCCsymt.h:
        changes to handle multiple sends & receives

        * src/SDCCptropt.h:
        added some pointer arithmetic optimization

        * src/SDCCptropt.c:
        added some pointer arithmetic optimizations but not stable yet so not
        called from anywhere (will get this working shortly)

        * src/SDCCopt.c: fixed for multiple sends & receives

        * src/SDCCmain.c:
        1) added options --parms-in-bank1 (ds390/mcs51) & --protect-sp-update
        2) preprocessing done AFTER port->finalizeoptions . This allows ports to
           set preprocessor defines (depending on options)

        * src/SDCCicode.c, src/SDCCicode.h:
        changes made to handle multiple sends & receives

        * src/SDCCglobl.h:
        Added options --protect-sp-update (ds390) and --parms-in-bank1 (ds390/mcs51)

        * src/SDCCcse.c, src/SDCCcse.h:
        added function findbackward def (to be used in upcoming optimization)

        * src/SDCCcflow.c, src/SDCCcflow.h:
        added function returnAtEnd - to determine if a basic block terminates with
        a RETURN iCode

        * src/SDCCast.c, src/SDCCast.h:
        added option parms-in-bank1

        * device/lib/_divsint.c, device/lib/_divslong.c, device/lib/_divuint.c 
        * device/lib/_divulong.c, device/lib/_modsint.c, device/lib/_modslong.c 
        * device/lib/_modulong.c, device/lib/_mulint.c, device/lib/_mullong.c:
        adjusted for --parms-in-bank1 option

        * device/include/string.h:
        donot redefine "reentrant" keyword

        * device/include/ds80c390.h: Added some more SFRs

2002-01-28  Bernhard Held  <bernhard@bernhardheld.de>

        * sim/ucsim: Merged branch ucsim-034-pre3 to main trunk; new version 0.4 

2002-01-26  Bernhard Held  <bernhard@bernhardheld.de>

        * src/SDCCast.c (funcOfType): fix usage of double --float-reent

2002-01-22  Bernhard Held  <bernhard@bernhardheld.de>

        * support/regression/fwk/lib/testfwk.c (main): Removed workaround for bug #505387

2002-01-18  Paul Stoffregen  <paul@pjrc.com>

        * Added --xram-movc option

2002-01-13  Bernhard Held  <bernhard@bernhardheld.de>

        * support/regression/Makefile: don't include test-mcs51-stack-auto in target all

2002-01-11  Johan Knol

        * Added math lib of Jesus Calvino-Fraga

2002-01-08  Bernhard Held  <bernhard@bernhardheld.de>

        * src/SDCCmain.c (processFile): fix processing of ../../src.c
        * support/regression/Makefile: new target test-mcs51-stack-auto
        * support/regression/ports/mcs51-stack-auto/spec.mk: added

2002-01-04  Bernhard Held  <bernhard@bernhardheld.de>

        * src/SDCCglue.h: printIvalCharPtr(), not printIvalChar()

2002-01-04  Bernhard Held  <bernhard@bernhardheld.de>

        * support/regression/ports/mcs51/support.c: correct setup of timer / UART

2002-01-03  Bernhard Held  <bernhard@bernhardheld.de>

        * src/SDCCsymt.c (processFuncArgs): fix #498307 by Johan

        * src/SDCCglue.h: add definition for printIvalChar()

2002-01-02  Bernhard Held  <bernhard@bernhardheld.de>

        * src/SDCCast.c: fix #498138 by Johan

        * src/SDCCglue.c: fix #498138 by Johan

2002-01-02  Bernhard Held  <bernhard@bernhardheld.de>

        * support/regression/Makefile: fix clean

        * support/regression/ports/ds390/support.c: fix transmission of last character

2001-12-29  Sandeep Dutta  <sandeep@ddi.com>

        * /sdcc/src/ds390/gen.c:
        a) improved computing address of stack variable
        b) took out some #if 0 code
        c) improved parmBytes adjustment
        d) improved genPlusIncr & genMinusIncr
        e) genCmp could generate bad code (when left assigned to DPTR)
        f) Fixed bug in hasInc

        * /sdcc/src/ds390/ralloc.c:
        a) packRegsForSupport could mess up live information (Fixed)
        b) packRegsDPTRuse could be incorrect for left & right shift

        * /sdcc/src/mcs51/ralloc.c:
        packRegsForSupport could mess up the live information (Fixed)

        * /sdcc/src/mcs51/gen.c: Fixed a bug in hasInc

        * /sdcc/src/SDCCast.c:
        can reverse a loop even if function call is present as long
        as the loop control variable is local & is not passed as parameter

2001-12-24  Sandeep Dutta  <sandeep@ddi.com>

        * /sdcc/ChangeLog: *** empty log message ***

        * /sdcc/src/ds390/gen.c, /sdcc/src/ds390/main.c:
        More builtin function additions for TININative

        * /sdcc/src/ds390/ralloc.c:
        Had broken the regression testsuite

        * /sdcc/src/SDCCast.c: Fixed a bug in dumptree

        * /sdcc/src/SDCCsymt.c, /sdcc/src/SDCCsymt.h:
        Added funcattr hasStackParms will be set for reentrant functions when there
        are paramteres on the stack, this helps in minimizing frame pointer generation
        typeFromStr can handle function pointers now

        * /sdcc/doc/builtins.txt, /sdcc/doc/TININative.txt:
        *** empty log message ***

2001-12-24  Sandeep Dutta  <sandeep@ddi.com>

        * /src/ds390/gen.c, /src/ds390/main.c:
        More builtin function additions for TININative

        * /src/ds390/ralloc.c:
        Had broken the regression testsuite

        * /src/SDCCast.c: Fixed a bug in dumptree

        * /src/SDCCsymt.c, /src/SDCCsymt.h:
        Added funcattr hasStackParms will be set for reentrant functions when there
        are paramteres on the stack, this helps in minimizing frame pointer generation
        typeFromStr can handle function pointers now

        * /doc/builtins.txt, /doc/TININative.txt:
        *** empty log message ***


2001-12-24  Sandeep Dutta  <sandeep@ddi.com>

        * /src/ds390/gen.c, /src/ds390/main.c, /src/ds390/peeph.def, /src/ds390/ralloc.c:
        ALPHA version for -mTININative

        * /src/izt/i186.c, /src/izt/tlcs900h.c, /src/mcs51/main.c, /src/pic/main.c, /src/z80/main.c, /src/avr/main.c:
        updated to reflect changes in the port structure

        * /src/port.h:
        added function do_assemble (similar to do_link) if non-null this function
        will be called to do assembly (-mTININative) requires a multi command
        assembly
        added function genAssemblerEnd will be called to generate assembler Epilogue

        * /src/SDCCsymt.c:
        added _JavaNative to debug info printing

        * /src/SDCCmain.c: added option --tini-libid
        added port->do_assemble function (-mTININative) has a multi command assemble

        * /src/SDCCglue.c: Disabled "constExpr" check
        added port->genAssemblerEnd function

        * /src/SDCCglobl.h: Added option --tini-libid value

        * /src/SDCCast.h:
        tookout optimizeCompare from the header (has no external references)

        * /src/SDCCast.c: made one more function "static"

2001-12-23  Michael Hope  <michaelh@juju.net.nz>

        * src/z80/mappings.i: Added z80asm support.

        * src/z80/main.c: Added z80asm support on --asm=z80asm

        * src/z80/gen.c: Fixed asm portability issues.

        * src/asm.c (tvsprintf): Removed old code, added 'N' for function name.  For extern support.

        * src/SDCCglue.c (printExterns): Added global/extern split.

2001-12-17  Bernhard Held  <bernhard@bernhardheld.de>

        * support/regression/Makefile: added test for mcs51 model large

        * support/regression/ports/mcs51-large/spec.mk: added test for mcs51 model large

        * support/regression/ports/gbz80/spec.mk: added -mgbz80

2001-12-05  Michael Hope  <michaelh@juju.net.nz>

        * src/diff.1 (Index): Many, many optmisiations.  Dhrystone up to 201.

1904-01-06  Michael Hope  <michaelh@juju.net.nz>

        * src/z80/ralloc.c (packRegsForIYUse): Fixed the case where an operand is in direct space.

        * src/z80/gen.c (makeFreePairId): Optimised IY load by using a spare pair.

2001-12-02  Bernhard Held  <bernhard@bernhardheld.de>

        * src/mcs51/gen.c (genFunction): avoid excess "inc sp"

        * support/regression/tests/simplefloat.c: Port to mcs51.

2001-11-25  Michael Hope  <michaelh@juju.net.nz>
        * support/regression/tests/bug-485362.c: Added.

        * support/regression/tests/simplefloat.c (testDivNearOne): Added.

        * src/z80/gen.c (aopOp): Fixed case where left and result are in the same spill loc and they have different sizes.

        * src/z80/peeph.def: Added rules for optimising two byte compares on the same thing, and to optimise two ptr assign.

        * src/z80/gen.c (aopDump): Added a dump function.

2001-11-25  Bernhard Held  <bernhard@bernhardheld.de>
        * sim/ucsim/s51.src/glob.cc: DS390 SFRs and bits added.

        * sim/ucsim/s51.src/port.cc: Port 4 and 5 added.

        * sim/ucsim/s51.src/regs51.h: DS390 SFRs added.

        * sim/ucsim/s51.src/uc390.cc: Some details improved, CKRDY works for tinibios.

        * sim/ucsim/s51.src/uc390cl.h: Work in progress.

        * sim/ucsim/sim.src/uccl.h: 6 ports for DS390.

        * support/regression/fwk/lib/testfwk.c: Run with tinibios.

        * support/regression/ports/mcs51/spec.mk: Fine tuninig.

        * support/regression/ports/ds390/support.c: Use tinibios.

        * support/regression/ports/ds390/spec.mk: Fine tuning, use tinibios.

2001-11-23  Michael Hope  <michaelh@juju.net.nz>support/regression/tests/bug-460010.c

        * src/z80/ralloc.c (packRegsForHLUse3): Changed to not pack into HL if anything is in direct space.
        (packRegsForHLUse3): Added packing support for send, cast, and return value from a call.

        * src/z80/peeph.def: Added rules for optimising pushes of part of a pair.

        * src/z80/gen.c (emitCall): Changed the stack fixup to not use HL.

2001-11-18  Michael Hope  <michaelh@juju.net.nz>

        * src/z80/gen.c (genCmp): Fixed compare on unsigned.

        * src/z80/ralloc.c (packRegsForHLUse3): Created and optimised.
        (packRegsForIYUse): Created and optimised.

2001-11-07  Michael Hope  <michaelh@juju.net.nz>

        * support/regression/tests/float.c (testFloatAdd): Fixed up warning.
2001-11-18  Bernhard Held  <bernhard@bernhardheld.de>

        * sdcc/support/regression/tests/bug-460010.c: fix seg violation on host

        * sdcc/support/regression/tests/muldiv.c: fix output on mcs51

        * sdcc/support/regression/tests/stacks.c: fix DSEG overflow on mcs51

2001-11-07  Bernhard Held  <bernhard@bernhardheld.de>

        * sdcc/sim/device/lib/_gptrget.c: mem region 5 (idata) added

        * sdcc/sim/device/lib/_gptrput.c: mem region 5 (idata) added

2001-11-07  Bernhard Held  <bernhard@bernhardheld.de>

        * sdcc/sim/ucsim/globals.cc: New: IXRAM.

        * sdcc/sim/ucsim/stypes.h: New: IXRAM.

        * sdcc/sim/ucsim/s51.src/uc390.cc: New: IXRAM.

2001-11-07  Michael Hope  <michaelh@juju.net.nz>

        * src/z80/ralloc.c (packRegsForHLUse): Banned IFXs from being packed into HL.
        (packRegsForHLUse): Added rule to pack address of/pointer get for itemps into HL for the Z80.
        (packRegsForAccUse2): Added rule to pack hbit IFXs into A.

        * src/z80/main.c (_setDefaultOptions): Made float code re-entrant by default.

        * src/z80/gen.c (aopGetLitWordLong): Added word support for floats.
        (genNotFloat): Added.
        (genUminusFloat): Added.

        * device/lib/z80/Makefile: Added floating pt stubs.

        * device/lib/Makefile.in (Z80SOURCES): Added floating pt support.

        * src/z80/gen.c (genIpush): Fixed up a push of one byte when left is in a pair.

        * device/lib/_fsadd.c (__fsadd): Fixed up return where the numbers are hugely different.

2001-11-07  Bernhard Held  <bernhard@bernhardheld.de>

        * sdcc/sim/ucsim/s51.src/glob.cc: Minor fix.

        * sdcc/sim/ucsim/s51.src/regs51.h: Minor fix.

        * sdcc/support/regression/Makefile: Add port ds390.

        * sdcc/support/regression/ports/mcs51/spec.mk: Minor change.

        * sdcc/support/regression/ports/z80/spec.mk: Minor change.

        * sdcc/support/regression/ports/ds390/spec.mk: Added.

        * sdcc/support/regression/ports/ds390/support.c: Added.

        * sdcc/support/regression/ports/ds390/uCsim.cmd: Added.

        * sdcc/support/regression/ports/mcs51/timeout.c: Cut.

        * sdcc/support/regression/fwk/lib/timeout.c: Paste.

2001-11-04  Michael Hope  <michaelh@juju.net.nz>

        * device/include/malloc.h: Added z80 and gbz80 support.

        * device/lib/gbz80/heap.s: Added.

        * device/lib/z80/heap.s: Added.

        * device/lib/malloc.c: Added z80 and gbz80 support.

        * support/regression/tests/malloc.c (testMalloc): Added.

        * src/SDCCmain.c (parseCmdLine): Added support for -Wp.

        * support/regression/tests/bug-478094.c: Added.

        * src/z80/gen.c (commitPair): Fixed silly gbz80/z80 commit to static bug.

2001-11-04  Bernhard Held  <bernhard@bernhardheld.de>

        * sdcc/sim/ucsim/s51.src/uc390cl.h: Improvement for ds390 to run regression tests

        * sdcc/sim/ucsim/s51.src/uc390.h: Improvement for ds390 to run regression tests

        * sdcc/sim/ucsim/s51.src/regs51.h: Improvement for ds390 to run regression tests

        * sdcc/sim/ucsim/s51.src/glob.cc: Improvement for ds390 to run regression tests

        * sdcc/support/regression/tests/bug-460010.c: Small change for ds390

2001-11-04  Michael Hope  <michaelh@juju.net.nz>

        * src/z80/peeph-gbz80.def: Removed a bad sub optimisation.

2001-11-03  Michael Hope  <michaelh@juju.net.nz>

        * support/regression/tests/bug-477927.c: Added.

        * src/z80/peeph.def: Added minor rules.

        * src/z80/gen.c (genPlusIncr): Added an extra plusinc rule.

        * src/z80/peeph.def: Added jump optimisation modification.

2001-11-01  Michael Hope  <michaelh@juju.net.nz>

        * src/SDCCmain.c (linkEdit): Added runtime path detection to the mcs51 port.

2001-10-30  Michael Hope  <michaelh@juju.net.nz>

        * support/regression/tests/funptrs.c: Added.

2001-10-29  Michael Hope  <michaelh@juju.net.nz>

        * src/z80/ralloc.c (packRegsForHLUse): Fixed up bad spill due to pushing one byte via HL.

2001-10-28  Michael Hope  <michaelh@juju.net.nz>

        * src/z80/gen.c (genArrayInit): Made it work for on stack arrays.

        * src/z80/main.c (gbz80_port =): Added rle support to the gbz80 port.

        * src/z80/gen.c (genMinus): Fixed for where the result is one byte.
        (movLeft2ResultLong): Created.

        * src/z80/ralloc.c (packRegsForHLUse): Added a couple of simple cases for the GB.
        (joinPushes): Added.  Joins two char pushes into a word push.

2001-10-27  Michael Hope  <michaelh@juju.net.nz>

        * support/cpp2/Makefile.in (install): Added creation of dest dir.

        * support/makebin/Makefile (install): Added creation of dest dir.

2001-10-24 Karl Bongers <karl@turbobit.com>

        * configure.in, configure, Makefile, support/cpp: Removed cpp folder, since we have new cpp2 preprocessor code.

2001-10-21  Michael Hope  <michaelh@juju.net.nz>

        * src/z80/ralloc.c: Turned off faulty pack for one use.

        * src/z80/peeph-gbz80.def: Removed redundent restart options.

        * src/z80/gen.c (genMult): Added native mul for constants on the z80 and gbz80.

2001-10-21  Bernhard Held  <bernhard@bernhardheld.de>

        * support/regression/Makefile: Improved clean

        * support/regression/ports/gbz80/spec.mk: Added clean

        * support/regression/ports/host/spec.mk: Added clean

        * support/regression/ports/z80/spec.mk: Added clean

        * support/regression/ports/mcs51/spec.mk: Added clean, little improvements

        * support/regression/ports/mcs51/timeout.c: little improvements

2001-10-17  Michael Hope  <michaelh@juju.net.nz>

        * device/lib/malloc.c (MEMHEADER): Fixed against new pedantic pointers.

        * support/regression/fwk/include/testfwk.h: Fixed up to use function pts correctly.

        * support/regression/generate-cases.py: Fixed up to use function pts correctly.

2001-10-16  Bernhard Held  <bernhard@bernhardheld.de>

        * support/regression/port/mcs51/spec.mk: add timeout for uCsim

        * support/regression/port/mcs51/timeout.c: add timeout for uCsim

2001-10-13  Michael Hope  <michaelh@juju.net.nz>
        * src/z80/gen.c (emitCall): Fixed up missing spill of HL when used to assign the result value.

        * src/z80/ralloc.c: Turned off pack for one use as it's quite broken.

        * src/SDCCmain.c (linkEdit): Added support for passing a legacy command line through the processor.

        * src/mcs51/main.c (_linkCmd): Added bin path to command.

        * src/SDCCmain.c (initValues): Added support for when it it called just to link.

        * as/mcs51/lklibr.c (libfil;): Turned off 'library file' message.

        * src/SDCCval.c (constVal): Fixed usage of 'L' modifier problems on ppc.

        * support/regression/tests/longor.c: Added.

2001-10-11  Bernhard Held  <bernhard@bernhardheld.de>

        * as/mcs51/asdata.c: replaced FILENAME_MAX with PATH_MAX

        * as/mcs51/aslink.h: define PATH_MAX

        * as/mcs51/asm.h: define PATH_MAX

        * as/mcs51/asmain.c: replaced FILENAME_MAX with PATH_MAX

        * as/mcs51/asnoice.c: replaced FILENAME_MAX with PATH_MAX

        * as/mcs51/lklex.c: replaced FILENAME_MAX with PATH_MAX

        * as/mcs51/lkmain.c: replaced FILENAME_MAX with PATH_MAX

        * src/SDCCglobl.h: define PATH_MAX

        * src/SDCCmacro.c: replaced FILENAME_MAX with PATH_MAX

        * src/SDCCmain.c: replaced FILENAME_MAX with PATH_MAX

2001-10-11  Michael Hope  <michaelh@juju.net.nz>

        * src/z80/gen.c (gencjneshort): Fixed

        * src/z80/ralloc.c (packRegsForHLUse): Added pack into HL for cast then ipush.

2001-10-09  Michael Hope  <michaelh@juju.net.nz>

        * support/regression/tests/bug-469671.c: Added.

        * src/z80/gen.c (shiftIntoPair): Fixed up warning.

2001-10-08  Michael Hope  <michaelh@juju.net.nz>

        * src/SDCCmain.c: Added --fommit-frame-pointer option and implemented in the z80 port.

        * src/z80/gen.c (genPlus): Fixed to work with extended stack.  Also fixed genMinus, genCmp.  genUMinus is still left.

2001-10-08  Bernhar Held  <bernhard@bernhardheld.de>

        * src/SDCCmain.c (preProcess): added define SDCC_NOOVERLAY

        * src/device/lib/_mulint.c  : removed hint: nooverlay bug

        * src/device/lib/_mullong.c : removed hint: nooverlay bug

        * src/device/lib/_divuint.c : removed hint: nooverlay bug

        * src/device/lib/_divulong.c: removed hint: nooverlay bug

        * src/device/lib/_moduint.c : removed hint: nooverlay bug

        * src/device/lib/_modulong.c: removed hint: nooverlay bug

2001-10-07  Michael Hope  <michaelh@juju.net.nz>

        * src/z80/gen.c (setupPair): Added 'extended stack' support for the z80.  Can now have local variables or parameters of more than 127 bytes in size.  Increadibly slow, but it will work.  Currently anything involving the carry flag.

        * support/Util/NewAlloc.c (freeTrace): Changed free for the gc case to not free at all.  Fixes runtime segfault.

        * support/regression/tests/scott-compare3.c (c_abcd): Fixed up casts.

2001-10-07    <johan@FRIJA>

        * device/lib/gets.c (gets): fixed the return value.

2001-10-06  Michael Hope  <michaelh@juju.net.nz>
        * src/SDCCmain.c (WRITE_SEG_LOC): Fixed up to use Safe_strdup.

        * src/SDCCpeeph.c (peepHole): Fixed all leaks.  Added trace support for freeing lines.  Optimised restart logic to re-run instead of restart.  Now compiles dscan.c on ~60MB instead of ~200MB.

        * support/Util/NewAlloc.c: Added ability to use libgc instead of malloc.  Added Safe_free and Safe_strdup.  Added trace support where you can log allocations and free all at once.

        * src/z80/gen.c (genZ80Code): Added de-allocation via trace support.

        * src/pic/gen.c: Removed Safe_strdup.

        * configure.in: Added option to enable libgc support.

        * src/SDCCbitv.c (bitVectnBitsOn): Optimised.
        (bitVectUnion): Optimised.
        (bitVectIntersect): Optimised.
        (bitVectBitsInCommon): Optimised.
        (bitVectCplAnd): Optimised.

        * support/makebin/makebin.c (usage): Removed getopt as mingw32 doesn't have it.  Sigh.

2001-10-03 Bernhard Held <bernhard@bernhardheld.de>

        * src/SDCCmain.c: distinguish between assembler debug and plain options

        * src/avr/main.c:   remove standard assembler options

        * src/ds390/main.c: remove standard assembler options

        * src/mcs51/main.c: remove standard assembler options

        * src/port.h: removed "PENDING" comment

2001-10-03 Bernhard Held <bernhard@bernhardheld.de>

        * src/device/lib/_mulint.c  : new, with assember functions

        * src/device/lib/_mullong.c : new, with assember functions

        * src/device/lib/_divuint.c : with assember functions

        * src/device/lib/_divsint.c : with assember functions

        * src/device/lib/_divulong.c: with assember functions

        * src/device/lib/_divslong.c: with assember functions

        * src/device/lib/_moduint.c : with assember functions

        * src/device/lib/_modsint.c : with assember functions

        * src/device/lib/_modulong.c: with assember functions

        * src/device/lib/_modslong.c: with assember functions

        * src/device/lib/libint.lib:  replaced _muluint.c  and _mulsint.c  by _mulint.c

        * src/device/lib/liblong.lib: replaced _mululong.c and _mulslong.c by _mullong.c

        * src/device/lib/Makefile.in: replaced _muluint.c  and _mulsint.c  by _mulint.c
                                      replaced _mululong.c and _mulslong.c by _mullong.c

2001-10-03 Bernhard Held <bernhard@bernhardheld.de>

        * src/SDCCsymt.c: sequence of specifiers in pintTypeChain() corrected

2001-10-01 Bernhard Held <bernhard@bernhardheld.de>

        * src/SDCCglue.c: test, if win32api is available for MINGW

2001-10-01 Bernhard Held <bernhard@bernhardheld.de>

        * src/SDCCsymt.c: no more _modifier in printTypeChain()
        * support/regression/tests/driverstruct.c: REENTRANT for mcs51
        * support/regression/ports/gbz80/spec.mk: removed GENERIC
        * support/regression/ports/host/spec.mk: removed GENERIC
        * support/regression/ports/mcs51/spec.mk: removed GENERIC
        * support/regression/ports/z80/spec.mk: removed GENERIC

2001-10-01  Michael Hope  <michaelh@juju.net.nz>

        * support/regression/fwk/lib/testfwk.c (__printf): Removed GENERIC.

        * support/regression/tests/bug-467035.c: Created.

2001-10-01    <johan@FRIJA>

        * src/SDCC.y: fixed bug #466586 part 1

2001-10-01  Johan Knol <johan.knol@iduna.nl>

        * SDCCicode.c: z80 has no generic pointers
        * removed -s from strip in all Makefile(.in)'s. It is not needed, but Solaris chocks on it.
        
2001-09-30  Michael Hope  <michaelh@juju.net.nz>

        * sim/ucsim/cmd.src/Makefile.in ($(PRJDIR)/libcmd.a): Changed all ar references to $(AR) for Solaris.

2001-09-29  Michael Hope  <michaelh@juju.net.nz>

        * Makefile (sdcc-libs): Added makebin to the list of standard targets.

        * support/regression/ports/z80/spec.mk: Updated to use env for sdcc bin dir for automatic regression.

2001-09-25  Michael Hope  <michaelh@juju.net.nz>

        * configure.in: Fixed up so that ucsim is only configured once.

        * support/cpp2/configure.in: Fixed to use the program transform to append the .exe for the win32 build.

        * src/SDCCutil.c (getPrefixFromBinPath): Fixed up to work with win32 in all of its glory.
        (getPathDifference): As above.

        * src/SDCCmain.c (preProcess): Changed to use a temporary file in a proper temp directory.  Fixed case where pre-processing only.

        * src/SDCCglue.c (tempfilename): Added function for pre-processor.

2001-09-23  Michael Hope  <michaelh@juju.net.nz>
        * .version: Updated to 2.3.1

        * src/z80/main.c (z80_port =): Added macro based linker and assembler command line support.
        Added copyright header.

        * src/SDCCmain.c: Shifted various functions into SDCCutil.c
        (assemble): Added support for macro based assembler commands.
        (linkEdit): Added support for macro based linker commands.
        (preProcess): Changed the pre-processor to use macros.
        (_setPaths): Added functionality to autodetect the include, lib and bin dir paths.
        (_discoverPaths): Added support for overriding the install directory using the SDCCDIR env variable.

        * device/lib/z80/crt0.s: Added module name for debugging.

2001-09-20  Michael Hope  <michaelh@juju.net.nz>

        * src/SDCCmain.c (printVersionInfo): Added the build date to the version info.

        * src/SDCChasht.c (hTabDeleteByKey): Fixed delete as it would delete the last item from a bucket even if it wasn't the real one.

        * src/SDCCglue.c: Moved gc_strdup to SDCCutil.c

        * src/Makefile.in: Added SDCCmacro and SDCCutil

2001-09-19  Michael Hope  <michaelh@juju.net.nz>

        * src/SDCCmain.c (printVersionInfo): Added the build date to the version info.

2001-09-16    <johan@FRIJA>

        * support/Util/SDCCerr.c: fixed up the error/warning/info database. I only changed the E_ W_ I_ prefix to what SDCCerr.c says it is.

2001-09-15    <johan@FRIJA>

        * src/mcs51/ralloc.c: (findAssignToSym): fixed bug #460662 part 1
        * src/ds390/ralloc.c (findAssignToSym): fixed bug #460662 part 1

2001-09-11    <johan@FRIJA>

        * src/SDCCval.c (valDiv Mod Minus Plus Shift): keep litteral expressions as small as possible (bug #460010)

2001-09-10  Michael Hope  <michaelh@juju.net.nz>

        * support/regression/tests/bug-460444.c: Added test case.

        * src/z80/gen.c (genOr): bug 460444: if (a ^ lit) was broken for &, |, and ^.
        (genCast): Added justification for all of the asserts.

2001-09-10  Bernhard Held <bernhard@bernhardheld.de>

        * support/regression/support.c: _xdata replaced by xdata

        * support/regression/spec.mk: removed _generic

2001-09-09  Michael Hope  <michaelh@juju.net.nz>

        * src/pic/ralloc.c (debugLogRegType): Removed some old types to get it to compile.

        * src/z80/gen.c (shiftR2Left2Result): Improved the case when v = v >> n for small values of n to use less code space and time.
        (genrshTwo): Fixed v = v >> n where v is a negative int and n is > 8: bug 460010.

        * src/z80/peeph.def: Added a rule to optimise shift then compare.

        * support/regression/tests/bug-460000.c (testShiftByParam): Added test case.

        * support/regression/tests/bug-460010.c: Added test case.

        * support/regression/Makefile (test-host): Removed a silly 'clean' target when testing against gcc.

2001-09-09  Bernhard Held <bernhard@bernhardheld.de>

        * support/regression/Makefile: inter-port-clean adjusted for mcs51

        * support/regression/testfwk.c: removed workaround for bug #436344

        * support/regression/tests/bp.c: use less memory with mcs51

        * support/regression/tests/bug-441448.c: use less memory

        * support/regression/tests/ports/mcs51/spec.mk: cleanup, use --stack-after-data

        * support/regression/collate-results.py: typo

2001-09-08  Michael Hope  <michaelh@juju.net.nz>

        * support/regression/tests/fetchoverlap.c: Added new test case.

        * support/regression/tests/bp.c: Added new test case.

        * support/regression/tests/bug-448984.c: Added new test case.

        * support/regression/tests/pow2shifts.c: Added new test case.

        * src/z80/gen.c: Turned off the noise it normally generates for the release.
        (genlshTwo): Fixed right shift for count > 8.

        * src/z80/ralloc.c: Disabled most of the ACC packing rules as they weren't getting hit and weren't at all safe.

2001-09-08    <johan@FRIJA>

        * src/SDCCicode.c (geniCodeCall): a CPOINTER can be used as a function

2001-09-07    <johan@FRIJA>

        * src/SDCCicode.c (newiCodeCondition): fixed bug #456235 (1.77)

        * src/SDCCglue.c (emitRegularMap): only delete a symbol when it is a symbol

2001-09-06    <johan@FRIJA>

        * src/SDCC.y: this could be a fix for bug #458744 (1.37)
        * bernhard noted me at this: "() equals to (void)" (1.38)

2001-09-05    <johan@FRIJA>

        * src/SDCCglue.c (emitRegularMap): a fix for bug #458099/2

2001-09-04    <johan@FRIJA>

        * src/SDCCsymt.c (checkSClass): a fix for bug #458099/1


2001-09-04  Paul Stoffregen  <paul@pjrc.com>

        * pragma noinduction broke memcpy on mcs51 large model.  Moved it inside z80 optimization

2001-09-03  Michael Hope  <michaelh@juju.net.nz>

        * link/z80/aslink.h: Fixed path for PATH_MAX

2001-09-02  Michael Hope  <michaelh@juju.net.nz>

        * src/z80/gen.c (fetchLitPair): Changed so that it properly caches direct space references.

        * support/regression/tests/addsub.c: Added cases to cover all the +, - combinations.

        * support/regression/tests/uminus.c: Added a test for the unary minus operator.

        * src/z80/gen.c (genUminus): Fixed add, sub, and uminus on the gbz80 port for longs.  Had to shift some functions about to do it.

2001-09-01  Michael Hope  <michaelh@juju.net.nz>

        * src/z80/gen.c: Fixed up generator to pass the regresion tests, specifically fixing loads for longs, genCmp, and turned on the map file.
        (genCmp): Fixed up genCmp for the GB with longs.

        * device/lib/gbz80/Makefile: Fixed up all the libraries to pass the regression tests.

        * support/regression/ports/host/spec.mk: Updated to compile with the new type specifiers.

        * device/lib/Makefile.in (Z80SOURCES): Removed old _mululong, _mulslong, and unneeded _mulint.

        * device/lib/_mullong.c (_mulslong): Changed to actually return a value :)

2001-08-30  Paul Stoffregen  <paul@pjrc.com>

        * added peepholes 223 to 231 to mcs51 port.  These improve code when using large model.

2001-08-30  Michael Hope  <michaelh@juju.net.nz>

        * device/lib/gbz80/crt0.s (init): Fixed up support for the gbz80 such that it will at least run (and fail badly) the regression tests.

        * src/z80/gen.c (genPlus): Changed bad long add for gb to a fall through.

2001-08-29  Michael Hope  <michaelh@juju.net.nz>

        * link/z80/aslink.h: Fixed long file name support.  Is now based off PATH_MAX instead of a constant.

        * src/z80/gen.c: Fixed add and sub for the case where left or right are in static space.

2001-08-30 Bernhard Held   <bernhard@bernhardheld.de>

  * sim/ucsim/configure:    little improvement of Cygwin-detection      
  * sim/ucsim/configure.in: little improvement of Cygwin-detection      
  * sim/ucsim/cmd.src/newcmdcl.h: include <sys/types.h> to define fd_set automated build
  * support/regression/tests/bug-221100.c: small changes for mcs51
  * support/regression/tests/bug-221168.c: small changes for mcs51
  * support/regression/tests/bug-227710.c: small changes for mcs51
  * support/regression/tests/staticinit.c: small changes for mcs51
  * as/mcs51/aslink.h: accept everything as symbol name in rel-files, bug fix ID 452601
  * as/mcs51/lklex.c:  accept everything as symbol name in rel-files, bug fix ID 452601
  * as/mcs51/lksym.c:  accept everything as symbol name in rel-files, bug fix ID 452601