[fw/sdcc] / ChangeLog

2002-03-02    <johan@FRIJA>

        * src/SDCCast.c (decorateType): fixed bug #524708

        * src/SDCCval.c (floatFromVal): fixed the literal void (whatever that may be)

        * src/SDCCicode.c (geniCodePtrPtrSubtract): fixed bug #524691

2002-03-01  Michael Hope  <michaelh@vroom>

        * src/SDCCsymt.c (initCSupport): Removed managling of support function names.

        * src/z80/ralloc.c (packRegsForIYUse): Fixed fp bug where four byte operands were packed into IY.

2002-03-01    <johan@FRIJA>

        * src/SDCCglue.c (printIvalPtr): fixed bug #524211

        * src/SDCCast.c (decorateType): fixed bug #524209

        * src/SDCCval.c (valNot): fixed bug #524195

2002-02-26    <johan@balder>

        * src/xa51/gen.c: fixed a warning

        * src/SDCCglue.c (printIvalFuncPtr): fixed bug #522534

        * src/SDCCast.c (decorateType): fixed bug #522534

2002-02-23    <johan@balder>

        * src/SDCCdflow.c (computeDataFlow): fixed bug #460088

2002-02-22    <johan@balder>

        * src/SDCCast.c: fixed bug #514865

        * src/SDCCy.c ("SDCC.y"): fixed bug #516625

2002-02-21  Sandeep Dutta  <sandeep@ddi.com>

        * sdcc/src/SDCCloop.c:
        Previous fix was not good. basic blocks that have "break" or "return" are
        not really partof a loop , but live ranges used in these blocks should
        be live thru the entire loop, so set partOfLoop but don't add them to
        loop region

2002-02-21    <johan@FRIJA>

        * src/SDCCcse.c: fixed bug #514308

2002-02-20  Sandeep Dutta  <sandeep@ddi.com>

        * src/SDCCloop.c:
        Fixed BUG #519583. If a conditional block ended in a return/break
        statement inside a loop, it was not being considered part of the loop.

        * src/SDCCcflow.c: Removed fix (Fixed in SDCCloop.c)

2002-02-10  Karl Bongers <karl@turbobit.com>

        * debugger/*:
        Fixed up SDCDB debugger somewhat.  Updated debugger/README
        with lots of comments and notes.

        * device/examples/test2.c:
        Fix bug, "red" variable not being initialized(compiler complained).

        * device/examples/Makefile, examples/test3.c:
        Add Makefile in device/examples folder, compiles test3.c
        for use as a multiple module SDCDB test case.

        * sim/ucsim/cmd.src/cmdset.cc:
        Took out debug printfs in ucsim "next" command.

        * sim/ucsim/xa.src:
        Karl and Johan start ucsim XA support.  Most dissassembly working,
        about 75% emulation done(plenty of work remaining).

        * sim/ucsim/z80.src:
        Add Z80 support to ucsim, add test-ucz80 regression test,
        notice ucsim/z80 emulation fails on examples/test3.c/itoa code.
        Notice z80 compiler fails on examples/test3.c/crc code.

2002-01-30  Sandeep Dutta  <sandeep@ddi.com>

        * src/mcs51/gen.c, src/mcs51/main.c, src/mcs51/ralloc.c:
        Added support for --parms-in-bank1

        * src/ds390/peeph.def:
        added a few more peephole optimzations

        * src/ds390/main.c:
        1) added __builtin_inp & __builtin_outp used to read in data of given length
           from a memory mapped port
        2) added __builtin_memcmp
        3) added __builtin_swapw swap bytes of a short

        * src/ds390/gen.c, src/ds390/gen.h, src/ds390/ralloc.c:
        1) handle multiple send & receives from register bank1
        2) ralloc can now allocate DPTR1 to some liveRanges

        * src/SDCCsymt.c, src/SDCCsymt.h:
        changes to handle multiple sends & receives

        * src/SDCCptropt.h:
        added some pointer arithmetic optimization

        * src/SDCCptropt.c:
        added some pointer arithmetic optimizations but not stable yet so not
        called from anywhere (will get this working shortly)

        * src/SDCCopt.c: fixed for multiple sends & receives

        * src/SDCCmain.c:
        1) added options --parms-in-bank1 (ds390/mcs51) & --protect-sp-update
        2) preprocessing done AFTER port->finalizeoptions . This allows ports to
           set preprocessor defines (depending on options)

        * src/SDCCicode.c, src/SDCCicode.h:
        changes made to handle multiple sends & receives

        * src/SDCCglobl.h:
        Added options --protect-sp-update (ds390) and --parms-in-bank1 (ds390/mcs51)

        * src/SDCCcse.c, src/SDCCcse.h:
        added function findbackward def (to be used in upcoming optimization)

        * src/SDCCcflow.c, src/SDCCcflow.h:
        added function returnAtEnd - to determine if a basic block terminates with
        a RETURN iCode

        * src/SDCCast.c, src/SDCCast.h:
        added option parms-in-bank1

        * device/lib/_divsint.c, device/lib/_divslong.c, device/lib/_divuint.c 
        * device/lib/_divulong.c, device/lib/_modsint.c, device/lib/_modslong.c 
        * device/lib/_modulong.c, device/lib/_mulint.c, device/lib/_mullong.c:
        adjusted for --parms-in-bank1 option

        * device/include/string.h:
        donot redefine "reentrant" keyword

        * device/include/ds80c390.h: Added some more SFRs

2002-01-28  Bernhard Held  <bernhard@bernhardheld.de>

        * sim/ucsim: Merged branch ucsim-034-pre3 to main trunk; new version 0.4 

2002-01-26  Bernhard Held  <bernhard@bernhardheld.de>

        * src/SDCCast.c (funcOfType): fix usage of double --float-reent

2002-01-22  Bernhard Held  <bernhard@bernhardheld.de>

        * support/regression/fwk/lib/testfwk.c (main): Removed workaround for bug #505387

2002-01-18  Paul Stoffregen  <paul@pjrc.com>

        * Added --xram-movc option

2002-01-13  Bernhard Held  <bernhard@bernhardheld.de>

        * support/regression/Makefile: don't include test-mcs51-stack-auto in target all

2002-01-11  Johan Knol

        * Added math lib of Jesus Calvino-Fraga

2002-01-08  Bernhard Held  <bernhard@bernhardheld.de>

        * src/SDCCmain.c (processFile): fix processing of ../../src.c
        * support/regression/Makefile: new target test-mcs51-stack-auto
        * support/regression/ports/mcs51-stack-auto/spec.mk: added

2002-01-04  Bernhard Held  <bernhard@bernhardheld.de>

        * src/SDCCglue.h: printIvalCharPtr(), not printIvalChar()

2002-01-04  Bernhard Held  <bernhard@bernhardheld.de>

        * support/regression/ports/mcs51/support.c: correct setup of timer / UART

2002-01-03  Bernhard Held  <bernhard@bernhardheld.de>

        * src/SDCCsymt.c (processFuncArgs): fix #498307 by Johan

        * src/SDCCglue.h: add definition for printIvalChar()

2002-01-02  Bernhard Held  <bernhard@bernhardheld.de>

        * src/SDCCast.c: fix #498138 by Johan

        * src/SDCCglue.c: fix #498138 by Johan

2002-01-02  Bernhard Held  <bernhard@bernhardheld.de>

        * support/regression/Makefile: fix clean

        * support/regression/ports/ds390/support.c: fix transmission of last character

2001-12-29  Sandeep Dutta  <sandeep@ddi.com>

        * /sdcc/src/ds390/gen.c:
        a) improved computing address of stack variable
        b) took out some #if 0 code
        c) improved parmBytes adjustment
        d) improved genPlusIncr & genMinusIncr
        e) genCmp could generate bad code (when left assigned to DPTR)
        f) Fixed bug in hasInc

        * /sdcc/src/ds390/ralloc.c:
        a) packRegsForSupport could mess up live information (Fixed)
        b) packRegsDPTRuse could be incorrect for left & right shift

        * /sdcc/src/mcs51/ralloc.c:
        packRegsForSupport could mess up the live information (Fixed)

        * /sdcc/src/mcs51/gen.c: Fixed a bug in hasInc

        * /sdcc/src/SDCCast.c:
        can reverse a loop even if function call is present as long
        as the loop control variable is local & is not passed as parameter

2001-12-24  Sandeep Dutta  <sandeep@ddi.com>

        * /sdcc/ChangeLog: *** empty log message ***

        * /sdcc/src/ds390/gen.c, /sdcc/src/ds390/main.c:
        More builtin function additions for TININative

        * /sdcc/src/ds390/ralloc.c:
        Had broken the regression testsuite

        * /sdcc/src/SDCCast.c: Fixed a bug in dumptree

        * /sdcc/src/SDCCsymt.c, /sdcc/src/SDCCsymt.h:
        Added funcattr hasStackParms will be set for reentrant functions when there
        are paramteres on the stack, this helps in minimizing frame pointer generation
        typeFromStr can handle function pointers now

        * /sdcc/doc/builtins.txt, /sdcc/doc/TININative.txt:
        *** empty log message ***

2001-12-24  Sandeep Dutta  <sandeep@ddi.com>

        * /src/ds390/gen.c, /src/ds390/main.c:
        More builtin function additions for TININative

        * /src/ds390/ralloc.c:
        Had broken the regression testsuite

        * /src/SDCCast.c: Fixed a bug in dumptree

        * /src/SDCCsymt.c, /src/SDCCsymt.h:
        Added funcattr hasStackParms will be set for reentrant functions when there
        are paramteres on the stack, this helps in minimizing frame pointer generation
        typeFromStr can handle function pointers now

        * /doc/builtins.txt, /doc/TININative.txt:
        *** empty log message ***


2001-12-24  Sandeep Dutta  <sandeep@ddi.com>

        * /src/ds390/gen.c, /src/ds390/main.c, /src/ds390/peeph.def, /src/ds390/ralloc.c:
        ALPHA version for -mTININative

        * /src/izt/i186.c, /src/izt/tlcs900h.c, /src/mcs51/main.c, /src/pic/main.c, /src/z80/main.c, /src/avr/main.c:
        updated to reflect changes in the port structure

        * /src/port.h:
        added function do_assemble (similar to do_link) if non-null this function
        will be called to do assembly (-mTININative) requires a multi command
        assembly
        added function genAssemblerEnd will be called to generate assembler Epilogue

        * /src/SDCCsymt.c:
        added _JavaNative to debug info printing

        * /src/SDCCmain.c: added option --tini-libid
        added port->do_assemble function (-mTININative) has a multi command assemble

        * /src/SDCCglue.c: Disabled "constExpr" check
        added port->genAssemblerEnd function

        * /src/SDCCglobl.h: Added option --tini-libid value

        * /src/SDCCast.h:
        tookout optimizeCompare from the header (has no external references)

        * /src/SDCCast.c: made one more function "static"

2001-12-23  Michael Hope  <michaelh@juju.net.nz>

        * src/z80/mappings.i: Added z80asm support.

        * src/z80/main.c: Added z80asm support on --asm=z80asm

        * src/z80/gen.c: Fixed asm portability issues.

        * src/asm.c (tvsprintf): Removed old code, added 'N' for function name.  For extern support.

        * src/SDCCglue.c (printExterns): Added global/extern split.

2001-12-17  Bernhard Held  <bernhard@bernhardheld.de>

        * support/regression/Makefile: added test for mcs51 model large

        * support/regression/ports/mcs51-large/spec.mk: added test for mcs51 model large

        * support/regression/ports/gbz80/spec.mk: added -mgbz80

2001-12-05  Michael Hope  <michaelh@juju.net.nz>

        * src/diff.1 (Index): Many, many optmisiations.  Dhrystone up to 201.

1904-01-06  Michael Hope  <michaelh@juju.net.nz>

        * src/z80/ralloc.c (packRegsForIYUse): Fixed the case where an operand is in direct space.

        * src/z80/gen.c (makeFreePairId): Optimised IY load by using a spare pair.

2001-12-02  Bernhard Held  <bernhard@bernhardheld.de>

        * src/mcs51/gen.c (genFunction): avoid excess "inc sp"

        * support/regression/tests/simplefloat.c: Port to mcs51.

2001-11-25  Michael Hope  <michaelh@juju.net.nz>
        * support/regression/tests/bug-485362.c: Added.

        * support/regression/tests/simplefloat.c (testDivNearOne): Added.

        * src/z80/gen.c (aopOp): Fixed case where left and result are in the same spill loc and they have different sizes.

        * src/z80/peeph.def: Added rules for optimising two byte compares on the same thing, and to optimise two ptr assign.

        * src/z80/gen.c (aopDump): Added a dump function.

2001-11-25  Bernhard Held  <bernhard@bernhardheld.de>
        * sim/ucsim/s51.src/glob.cc: DS390 SFRs and bits added.

        * sim/ucsim/s51.src/port.cc: Port 4 and 5 added.

        * sim/ucsim/s51.src/regs51.h: DS390 SFRs added.

        * sim/ucsim/s51.src/uc390.cc: Some details improved, CKRDY works for tinibios.

        * sim/ucsim/s51.src/uc390cl.h: Work in progress.

        * sim/ucsim/sim.src/uccl.h: 6 ports for DS390.

        * support/regression/fwk/lib/testfwk.c: Run with tinibios.

        * support/regression/ports/mcs51/spec.mk: Fine tuninig.

        * support/regression/ports/ds390/support.c: Use tinibios.

        * support/regression/ports/ds390/spec.mk: Fine tuning, use tinibios.

2001-11-23  Michael Hope  <michaelh@juju.net.nz>support/regression/tests/bug-460010.c

        * src/z80/ralloc.c (packRegsForHLUse3): Changed to not pack into HL if anything is in direct space.
        (packRegsForHLUse3): Added packing support for send, cast, and return value from a call.

        * src/z80/peeph.def: Added rules for optimising pushes of part of a pair.

        * src/z80/gen.c (emitCall): Changed the stack fixup to not use HL.

2001-11-18  Michael Hope  <michaelh@juju.net.nz>

        * src/z80/gen.c (genCmp): Fixed compare on unsigned.

        * src/z80/ralloc.c (packRegsForHLUse3): Created and optimised.
        (packRegsForIYUse): Created and optimised.

2001-11-07  Michael Hope  <michaelh@juju.net.nz>

        * support/regression/tests/float.c (testFloatAdd): Fixed up warning.
2001-11-18  Bernhard Held  <bernhard@bernhardheld.de>

        * sdcc/support/regression/tests/bug-460010.c: fix seg violation on host

        * sdcc/support/regression/tests/muldiv.c: fix output on mcs51

        * sdcc/support/regression/tests/stacks.c: fix DSEG overflow on mcs51

2001-11-07  Bernhard Held  <bernhard@bernhardheld.de>

        * sdcc/sim/device/lib/_gptrget.c: mem region 5 (idata) added

        * sdcc/sim/device/lib/_gptrput.c: mem region 5 (idata) added

2001-11-07  Bernhard Held  <bernhard@bernhardheld.de>

        * sdcc/sim/ucsim/globals.cc: New: IXRAM.

        * sdcc/sim/ucsim/stypes.h: New: IXRAM.

        * sdcc/sim/ucsim/s51.src/uc390.cc: New: IXRAM.

2001-11-07  Michael Hope  <michaelh@juju.net.nz>

        * src/z80/ralloc.c (packRegsForHLUse): Banned IFXs from being packed into HL.
        (packRegsForHLUse): Added rule to pack address of/pointer get for itemps into HL for the Z80.
        (packRegsForAccUse2): Added rule to pack hbit IFXs into A.

        * src/z80/main.c (_setDefaultOptions): Made float code re-entrant by default.

        * src/z80/gen.c (aopGetLitWordLong): Added word support for floats.
        (genNotFloat): Added.
        (genUminusFloat): Added.

        * device/lib/z80/Makefile: Added floating pt stubs.

        * device/lib/Makefile.in (Z80SOURCES): Added floating pt support.

        * src/z80/gen.c (genIpush): Fixed up a push of one byte when left is in a pair.

        * device/lib/_fsadd.c (__fsadd): Fixed up return where the numbers are hugely different.

2001-11-07  Bernhard Held  <bernhard@bernhardheld.de>

        * sdcc/sim/ucsim/s51.src/glob.cc: Minor fix.

        * sdcc/sim/ucsim/s51.src/regs51.h: Minor fix.

        * sdcc/support/regression/Makefile: Add port ds390.

        * sdcc/support/regression/ports/mcs51/spec.mk: Minor change.

        * sdcc/support/regression/ports/z80/spec.mk: Minor change.

        * sdcc/support/regression/ports/ds390/spec.mk: Added.

        * sdcc/support/regression/ports/ds390/support.c: Added.

        * sdcc/support/regression/ports/ds390/uCsim.cmd: Added.

        * sdcc/support/regression/ports/mcs51/timeout.c: Cut.

        * sdcc/support/regression/fwk/lib/timeout.c: Paste.

2001-11-04  Michael Hope  <michaelh@juju.net.nz>

        * device/include/malloc.h: Added z80 and gbz80 support.

        * device/lib/gbz80/heap.s: Added.

        * device/lib/z80/heap.s: Added.

        * device/lib/malloc.c: Added z80 and gbz80 support.

        * support/regression/tests/malloc.c (testMalloc): Added.

        * src/SDCCmain.c (parseCmdLine): Added support for -Wp.

        * support/regression/tests/bug-478094.c: Added.

        * src/z80/gen.c (commitPair): Fixed silly gbz80/z80 commit to static bug.

2001-11-04  Bernhard Held  <bernhard@bernhardheld.de>

        * sdcc/sim/ucsim/s51.src/uc390cl.h: Improvement for ds390 to run regression tests

        * sdcc/sim/ucsim/s51.src/uc390.h: Improvement for ds390 to run regression tests

        * sdcc/sim/ucsim/s51.src/regs51.h: Improvement for ds390 to run regression tests

        * sdcc/sim/ucsim/s51.src/glob.cc: Improvement for ds390 to run regression tests

        * sdcc/support/regression/tests/bug-460010.c: Small change for ds390

2001-11-04  Michael Hope  <michaelh@juju.net.nz>

        * src/z80/peeph-gbz80.def: Removed a bad sub optimisation.

2001-11-03  Michael Hope  <michaelh@juju.net.nz>

        * support/regression/tests/bug-477927.c: Added.

        * src/z80/peeph.def: Added minor rules.

        * src/z80/gen.c (genPlusIncr): Added an extra plusinc rule.

        * src/z80/peeph.def: Added jump optimisation modification.

2001-11-01  Michael Hope  <michaelh@juju.net.nz>

        * src/SDCCmain.c (linkEdit): Added runtime path detection to the mcs51 port.

2001-10-30  Michael Hope  <michaelh@juju.net.nz>

        * support/regression/tests/funptrs.c: Added.

2001-10-29  Michael Hope  <michaelh@juju.net.nz>

        * src/z80/ralloc.c (packRegsForHLUse): Fixed up bad spill due to pushing one byte via HL.

2001-10-28  Michael Hope  <michaelh@juju.net.nz>

        * src/z80/gen.c (genArrayInit): Made it work for on stack arrays.

        * src/z80/main.c (gbz80_port =): Added rle support to the gbz80 port.

        * src/z80/gen.c (genMinus): Fixed for where the result is one byte.
        (movLeft2ResultLong): Created.

        * src/z80/ralloc.c (packRegsForHLUse): Added a couple of simple cases for the GB.
        (joinPushes): Added.  Joins two char pushes into a word push.

2001-10-27  Michael Hope  <michaelh@juju.net.nz>

        * support/cpp2/Makefile.in (install): Added creation of dest dir.

        * support/makebin/Makefile (install): Added creation of dest dir.

2001-10-24 Karl Bongers <karl@turbobit.com>

        * configure.in, configure, Makefile, support/cpp: Removed cpp folder, since we have new cpp2 preprocessor code.

2001-10-21  Michael Hope  <michaelh@juju.net.nz>

        * src/z80/ralloc.c: Turned off faulty pack for one use.

        * src/z80/peeph-gbz80.def: Removed redundent restart options.

        * src/z80/gen.c (genMult): Added native mul for constants on the z80 and gbz80.

2001-10-21  Bernhard Held  <bernhard@bernhardheld.de>

        * support/regression/Makefile: Improved clean

        * support/regression/ports/gbz80/spec.mk: Added clean

        * support/regression/ports/host/spec.mk: Added clean

        * support/regression/ports/z80/spec.mk: Added clean

        * support/regression/ports/mcs51/spec.mk: Added clean, little improvements

        * support/regression/ports/mcs51/timeout.c: little improvements

2001-10-17  Michael Hope  <michaelh@juju.net.nz>

        * device/lib/malloc.c (MEMHEADER): Fixed against new pedantic pointers.

        * support/regression/fwk/include/testfwk.h: Fixed up to use function pts correctly.

        * support/regression/generate-cases.py: Fixed up to use function pts correctly.

2001-10-16  Bernhard Held  <bernhard@bernhardheld.de>

        * support/regression/port/mcs51/spec.mk: add timeout for uCsim

        * support/regression/port/mcs51/timeout.c: add timeout for uCsim

2001-10-13  Michael Hope  <michaelh@juju.net.nz>
        * src/z80/gen.c (emitCall): Fixed up missing spill of HL when used to assign the result value.

        * src/z80/ralloc.c: Turned off pack for one use as it's quite broken.

        * src/SDCCmain.c (linkEdit): Added support for passing a legacy command line through the processor.

        * src/mcs51/main.c (_linkCmd): Added bin path to command.

        * src/SDCCmain.c (initValues): Added support for when it it called just to link.

        * as/mcs51/lklibr.c (libfil;): Turned off 'library file' message.

        * src/SDCCval.c (constVal): Fixed usage of 'L' modifier problems on ppc.

        * support/regression/tests/longor.c: Added.

2001-10-11  Bernhard Held  <bernhard@bernhardheld.de>

        * as/mcs51/asdata.c: replaced FILENAME_MAX with PATH_MAX

        * as/mcs51/aslink.h: define PATH_MAX

        * as/mcs51/asm.h: define PATH_MAX

        * as/mcs51/asmain.c: replaced FILENAME_MAX with PATH_MAX

        * as/mcs51/asnoice.c: replaced FILENAME_MAX with PATH_MAX

        * as/mcs51/lklex.c: replaced FILENAME_MAX with PATH_MAX

        * as/mcs51/lkmain.c: replaced FILENAME_MAX with PATH_MAX

        * src/SDCCglobl.h: define PATH_MAX

        * src/SDCCmacro.c: replaced FILENAME_MAX with PATH_MAX

        * src/SDCCmain.c: replaced FILENAME_MAX with PATH_MAX

2001-10-11  Michael Hope  <michaelh@juju.net.nz>

        * src/z80/gen.c (gencjneshort): Fixed

        * src/z80/ralloc.c (packRegsForHLUse): Added pack into HL for cast then ipush.

2001-10-09  Michael Hope  <michaelh@juju.net.nz>

        * support/regression/tests/bug-469671.c: Added.

        * src/z80/gen.c (shiftIntoPair): Fixed up warning.

2001-10-08  Michael Hope  <michaelh@juju.net.nz>

        * src/SDCCmain.c: Added --fommit-frame-pointer option and implemented in the z80 port.

        * src/z80/gen.c (genPlus): Fixed to work with extended stack.  Also fixed genMinus, genCmp.  genUMinus is still left.

2001-10-08  Bernhar Held  <bernhard@bernhardheld.de>

        * src/SDCCmain.c (preProcess): added define SDCC_NOOVERLAY

        * src/device/lib/_mulint.c  : removed hint: nooverlay bug

        * src/device/lib/_mullong.c : removed hint: nooverlay bug

        * src/device/lib/_divuint.c : removed hint: nooverlay bug

        * src/device/lib/_divulong.c: removed hint: nooverlay bug

        * src/device/lib/_moduint.c : removed hint: nooverlay bug

        * src/device/lib/_modulong.c: removed hint: nooverlay bug

2001-10-07  Michael Hope  <michaelh@juju.net.nz>

        * src/z80/gen.c (setupPair): Added 'extended stack' support for the z80.  Can now have local variables or parameters of more than 127 bytes in size.  Increadibly slow, but it will work.  Currently anything involving the carry flag.

        * support/Util/NewAlloc.c (freeTrace): Changed free for the gc case to not free at all.  Fixes runtime segfault.

        * support/regression/tests/scott-compare3.c (c_abcd): Fixed up casts.

2001-10-07    <johan@FRIJA>

        * device/lib/gets.c (gets): fixed the return value.

2001-10-06  Michael Hope  <michaelh@juju.net.nz>
        * src/SDCCmain.c (WRITE_SEG_LOC): Fixed up to use Safe_strdup.

        * src/SDCCpeeph.c (peepHole): Fixed all leaks.  Added trace support for freeing lines.  Optimised restart logic to re-run instead of restart.  Now compiles dscan.c on ~60MB instead of ~200MB.

        * support/Util/NewAlloc.c: Added ability to use libgc instead of malloc.  Added Safe_free and Safe_strdup.  Added trace support where you can log allocations and free all at once.

        * src/z80/gen.c (genZ80Code): Added de-allocation via trace support.

        * src/pic/gen.c: Removed Safe_strdup.

        * configure.in: Added option to enable libgc support.

        * src/SDCCbitv.c (bitVectnBitsOn): Optimised.
        (bitVectUnion): Optimised.
        (bitVectIntersect): Optimised.
        (bitVectBitsInCommon): Optimised.
        (bitVectCplAnd): Optimised.

        * support/makebin/makebin.c (usage): Removed getopt as mingw32 doesn't have it.  Sigh.

2001-10-03 Bernhard Held <bernhard@bernhardheld.de>

        * src/SDCCmain.c: distinguish between assembler debug and plain options

        * src/avr/main.c:   remove standard assembler options

        * src/ds390/main.c: remove standard assembler options

        * src/mcs51/main.c: remove standard assembler options

        * src/port.h: removed "PENDING" comment

2001-10-03 Bernhard Held <bernhard@bernhardheld.de>

        * src/device/lib/_mulint.c  : new, with assember functions

        * src/device/lib/_mullong.c : new, with assember functions

        * src/device/lib/_divuint.c : with assember functions

        * src/device/lib/_divsint.c : with assember functions

        * src/device/lib/_divulong.c: with assember functions

        * src/device/lib/_divslong.c: with assember functions

        * src/device/lib/_moduint.c : with assember functions

        * src/device/lib/_modsint.c : with assember functions

        * src/device/lib/_modulong.c: with assember functions

        * src/device/lib/_modslong.c: with assember functions

        * src/device/lib/libint.lib:  replaced _muluint.c  and _mulsint.c  by _mulint.c

        * src/device/lib/liblong.lib: replaced _mululong.c and _mulslong.c by _mullong.c

        * src/device/lib/Makefile.in: replaced _muluint.c  and _mulsint.c  by _mulint.c
                                      replaced _mululong.c and _mulslong.c by _mullong.c

2001-10-03 Bernhard Held <bernhard@bernhardheld.de>

        * src/SDCCsymt.c: sequence of specifiers in pintTypeChain() corrected

2001-10-01 Bernhard Held <bernhard@bernhardheld.de>

        * src/SDCCglue.c: test, if win32api is available for MINGW

2001-10-01 Bernhard Held <bernhard@bernhardheld.de>

        * src/SDCCsymt.c: no more _modifier in printTypeChain()
        * support/regression/tests/driverstruct.c: REENTRANT for mcs51
        * support/regression/ports/gbz80/spec.mk: removed GENERIC
        * support/regression/ports/host/spec.mk: removed GENERIC
        * support/regression/ports/mcs51/spec.mk: removed GENERIC
        * support/regression/ports/z80/spec.mk: removed GENERIC

2001-10-01  Michael Hope  <michaelh@juju.net.nz>

        * support/regression/fwk/lib/testfwk.c (__printf): Removed GENERIC.

        * support/regression/tests/bug-467035.c: Created.

2001-10-01    <johan@FRIJA>

        * src/SDCC.y: fixed bug #466586 part 1

2001-10-01  Johan Knol <johan.knol@iduna.nl>

        * SDCCicode.c: z80 has no generic pointers
        * removed -s from strip in all Makefile(.in)'s. It is not needed, but Solaris chocks on it.
        
2001-09-30  Michael Hope  <michaelh@juju.net.nz>

        * sim/ucsim/cmd.src/Makefile.in ($(PRJDIR)/libcmd.a): Changed all ar references to $(AR) for Solaris.

2001-09-29  Michael Hope  <michaelh@juju.net.nz>

        * Makefile (sdcc-libs): Added makebin to the list of standard targets.

        * support/regression/ports/z80/spec.mk: Updated to use env for sdcc bin dir for automatic regression.

2001-09-25  Michael Hope  <michaelh@juju.net.nz>

        * configure.in: Fixed up so that ucsim is only configured once.

        * support/cpp2/configure.in: Fixed to use the program transform to append the .exe for the win32 build.

        * src/SDCCutil.c (getPrefixFromBinPath): Fixed up to work with win32 in all of its glory.
        (getPathDifference): As above.

        * src/SDCCmain.c (preProcess): Changed to use a temporary file in a proper temp directory.  Fixed case where pre-processing only.

        * src/SDCCglue.c (tempfilename): Added function for pre-processor.

2001-09-23  Michael Hope  <michaelh@juju.net.nz>
        * .version: Updated to 2.3.1

        * src/z80/main.c (z80_port =): Added macro based linker and assembler command line support.
        Added copyright header.

        * src/SDCCmain.c: Shifted various functions into SDCCutil.c
        (assemble): Added support for macro based assembler commands.
        (linkEdit): Added support for macro based linker commands.
        (preProcess): Changed the pre-processor to use macros.
        (_setPaths): Added functionality to autodetect the include, lib and bin dir paths.
        (_discoverPaths): Added support for overriding the install directory using the SDCCDIR env variable.

        * device/lib/z80/crt0.s: Added module name for debugging.

2001-09-20  Michael Hope  <michaelh@juju.net.nz>

        * src/SDCCmain.c (printVersionInfo): Added the build date to the version info.

        * src/SDCChasht.c (hTabDeleteByKey): Fixed delete as it would delete the last item from a bucket even if it wasn't the real one.

        * src/SDCCglue.c: Moved gc_strdup to SDCCutil.c

        * src/Makefile.in: Added SDCCmacro and SDCCutil

2001-09-19  Michael Hope  <michaelh@juju.net.nz>

        * src/SDCCmain.c (printVersionInfo): Added the build date to the version info.

2001-09-16    <johan@FRIJA>

        * support/Util/SDCCerr.c: fixed up the error/warning/info database. I only changed the E_ W_ I_ prefix to what SDCCerr.c says it is.

2001-09-15    <johan@FRIJA>

        * src/mcs51/ralloc.c: (findAssignToSym): fixed bug #460662 part 1
        * src/ds390/ralloc.c (findAssignToSym): fixed bug #460662 part 1

2001-09-11    <johan@FRIJA>

        * src/SDCCval.c (valDiv Mod Minus Plus Shift): keep litteral expressions as small as possible (bug #460010)

2001-09-10  Michael Hope  <michaelh@juju.net.nz>

        * support/regression/tests/bug-460444.c: Added test case.

        * src/z80/gen.c (genOr): bug 460444: if (a ^ lit) was broken for &, |, and ^.
        (genCast): Added justification for all of the asserts.

2001-09-10  Bernhard Held <bernhard@bernhardheld.de>

        * support/regression/support.c: _xdata replaced by xdata

        * support/regression/spec.mk: removed _generic

2001-09-09  Michael Hope  <michaelh@juju.net.nz>

        * src/pic/ralloc.c (debugLogRegType): Removed some old types to get it to compile.

        * src/z80/gen.c (shiftR2Left2Result): Improved the case when v = v >> n for small values of n to use less code space and time.
        (genrshTwo): Fixed v = v >> n where v is a negative int and n is > 8: bug 460010.

        * src/z80/peeph.def: Added a rule to optimise shift then compare.

        * support/regression/tests/bug-460000.c (testShiftByParam): Added test case.

        * support/regression/tests/bug-460010.c: Added test case.

        * support/regression/Makefile (test-host): Removed a silly 'clean' target when testing against gcc.

2001-09-09  Bernhard Held <bernhard@bernhardheld.de>

        * support/regression/Makefile: inter-port-clean adjusted for mcs51

        * support/regression/testfwk.c: removed workaround for bug #436344

        * support/regression/tests/bp.c: use less memory with mcs51

        * support/regression/tests/bug-441448.c: use less memory

        * support/regression/tests/ports/mcs51/spec.mk: cleanup, use --stack-after-data

        * support/regression/collate-results.py: typo

2001-09-08  Michael Hope  <michaelh@juju.net.nz>

        * support/regression/tests/fetchoverlap.c: Added new test case.

        * support/regression/tests/bp.c: Added new test case.

        * support/regression/tests/bug-448984.c: Added new test case.

        * support/regression/tests/pow2shifts.c: Added new test case.

        * src/z80/gen.c: Turned off the noise it normally generates for the release.
        (genlshTwo): Fixed right shift for count > 8.

        * src/z80/ralloc.c: Disabled most of the ACC packing rules as they weren't getting hit and weren't at all safe.

2001-09-08    <johan@FRIJA>

        * src/SDCCicode.c (geniCodeCall): a CPOINTER can be used as a function

2001-09-07    <johan@FRIJA>

        * src/SDCCicode.c (newiCodeCondition): fixed bug #456235 (1.77)

        * src/SDCCglue.c (emitRegularMap): only delete a symbol when it is a symbol

2001-09-06    <johan@FRIJA>

        * src/SDCC.y: this could be a fix for bug #458744 (1.37)
        * bernhard noted me at this: "() equals to (void)" (1.38)

2001-09-05    <johan@FRIJA>

        * src/SDCCglue.c (emitRegularMap): a fix for bug #458099/2

2001-09-04    <johan@FRIJA>

        * src/SDCCsymt.c (checkSClass): a fix for bug #458099/1


2001-09-04  Paul Stoffregen  <paul@pjrc.com>

        * pragma noinduction broke memcpy on mcs51 large model.  Moved it inside z80 optimization

2001-09-03  Michael Hope  <michaelh@juju.net.nz>

        * link/z80/aslink.h: Fixed path for PATH_MAX

2001-09-02  Michael Hope  <michaelh@juju.net.nz>

        * src/z80/gen.c (fetchLitPair): Changed so that it properly caches direct space references.

        * support/regression/tests/addsub.c: Added cases to cover all the +, - combinations.

        * support/regression/tests/uminus.c: Added a test for the unary minus operator.

        * src/z80/gen.c (genUminus): Fixed add, sub, and uminus on the gbz80 port for longs.  Had to shift some functions about to do it.

2001-09-01  Michael Hope  <michaelh@juju.net.nz>

        * src/z80/gen.c: Fixed up generator to pass the regresion tests, specifically fixing loads for longs, genCmp, and turned on the map file.
        (genCmp): Fixed up genCmp for the GB with longs.

        * device/lib/gbz80/Makefile: Fixed up all the libraries to pass the regression tests.

        * support/regression/ports/host/spec.mk: Updated to compile with the new type specifiers.

        * device/lib/Makefile.in (Z80SOURCES): Removed old _mululong, _mulslong, and unneeded _mulint.

        * device/lib/_mullong.c (_mulslong): Changed to actually return a value :)

2001-08-30  Paul Stoffregen  <paul@pjrc.com>

        * added peepholes 223 to 231 to mcs51 port.  These improve code when using large model.

2001-08-30  Michael Hope  <michaelh@juju.net.nz>

        * device/lib/gbz80/crt0.s (init): Fixed up support for the gbz80 such that it will at least run (and fail badly) the regression tests.

        * src/z80/gen.c (genPlus): Changed bad long add for gb to a fall through.

2001-08-29  Michael Hope  <michaelh@juju.net.nz>

        * link/z80/aslink.h: Fixed long file name support.  Is now based off PATH_MAX instead of a constant.

        * src/z80/gen.c: Fixed add and sub for the case where left or right are in static space.

2001-08-30 Bernhard Held   <bernhard@bernhardheld.de>

  * sim/ucsim/configure:    little improvement of Cygwin-detection      
  * sim/ucsim/configure.in: little improvement of Cygwin-detection      
  * sim/ucsim/cmd.src/newcmdcl.h: include <sys/types.h> to define fd_set automated build
  * support/regression/tests/bug-221100.c: small changes for mcs51
  * support/regression/tests/bug-221168.c: small changes for mcs51
  * support/regression/tests/bug-227710.c: small changes for mcs51
  * support/regression/tests/staticinit.c: small changes for mcs51
  * as/mcs51/aslink.h: accept everything as symbol name in rel-files, bug fix ID 452601
  * as/mcs51/lklex.c:  accept everything as symbol name in rel-files, bug fix ID 452601
  * as/mcs51/lksym.c:  accept everything as symbol name in rel-files, bug fix ID 452601