1 Turn-On Log for TeleMetrum boards
4 - First production run received from Advanced Circuits, 54 units of v1.0.
6 To be complete, each board needs:
8 - add GPS patch antenna
9 - add customer choice of pyro connector
10 - remove C38 (wrong value, optional)
11 - replace C36 with 1uF (better value)
14 persistent crc error problems communicating over UHF link
17 solder bridge across C3, caused USB enumeration failure. removed the
18 short and it works ok.
21 GPS sensitivity seems very low .. ok with off-board amplified patch
25 missing J9, installed from my parts stock.
28 kapton tape left over baro sensor port, removed with tweezers.
34 U4 installed 180 degrees rotated, thus 5V supply not working, accel
35 gave weird values. Removed and replaced with fresh part.
91 I really don't understand the missing J9 connectors. The empty
92 parts baggie that was in the package of stuff sent to me says 56
93 were purchased, and we only have 54 boards. Where'd they go? And
94 can someone explain how a big red connector that's so visually
95 obvious could be missed in QA?
97 The one solder bridge and one damaged 0402 resistor found so far
98 may just be par for the course at this price/service level?