# Maverick

A 1/3 scale Maverick AGM-65 missile.

## Motivation

At Airfest 16, Bdale spotted an odd-ball nearly hemispherical 98mm nose cone 
in one of the Giant Leap bins, and bought it for cheap.  His original thought
was that it might be fun to do an upscale of the Estes Big Bertha.  However,
the moment Robert spotted it after Bdale returned home, he exclaimed that it
looked like a Maverick nose cone... and wouldn't it be cool to build one!

The initial design Robert put together was frustrating, because it would not
fly safely on any motor less than an H... and Robert was too young to hold a
high power certification.  However, with the introduction of the new 
[Tripoli Mentoring Program](http://www.tripoli.org/Certifications/TripoliMentoringProgram/tabid/322/Default.aspx),
Robert decided to celebrate by actually building it!

So, this is Robert's custom design Maverick AGM-65 missile.  In 98mm, it works
out to be almost exactly 1/3 scale since the real missile is 12 inches in
diameter.  Safe flights require at least an H motor, which caused him to choose
a 38mm motor mount.

## Design Details

* 98mm [Giant Leap](http://giantleaprocketry.com/) DynaWind airframe
* 38mm phenolic motor mount
* Odd-ball nose cone from a junk box
* 1/8 inch birch plywood fins, vacuum-bagged with 6oz fiberglass using
  West Systems epoxy.  The aft fins are through the wall to the motor mount,
  the long strakes are surface mounted to minimize mass forward.
* 1/4 inch birch plywood centering rings and bulkheads, CNC milled.
* avionics bay with a [TeleMini](http://altusmetrum.org/TeleMini) for 
  apogee-only electronics with motor backup in a bay just behind the nose,
  that Robert likes to call "the warhead"

[OpenRocket](http://openrocket.sourceforge.net/) 
[Maverick Design File](./Maverick.ork)

## Build

## Flights

## Conclusions