guitar build project beginnings
[web/gag.com] / music / guitars / bdale-1 / index.mdwn
1 # Bdale's Custom Build of a Fender Stratocaster Clone #
2
3 For Christmas 2014, Robert and Elizabeth bought Bdale a beginner's guitar
4 book, and Robert offered to help with a guitar build project based on the
5 success of his Telecaster build.  This is the resulting project, Bdale's 
6 first guitar, started in February of 2015!
7
8 After a lot of reading and listening, a few core decisions got things rolling:
9
10 * build a "clone" of a hard-tail Fender Stratocaster (no tremolo)
11 * body and neck to be near-natural wood color with satin finish
12 * no pickguard (maximum exposed wood grain, rear control cavities
13 * pickups and all hardware in black
14 * standard strat-like 3-pickup, 1 volume, 2 tone design with 5-way selector
15 * noise-reduced pickups
16
17 We had a "spare" blank in alder big enough to machine the body, left over
18 from Robert's Telecaster project.  So the plan was to machine a custom body
19 and buy the rest of the parts from various sources.
20
21 Another intense period of study led to the decision to use 
22 [DiMarzio](http://dimarzio.com) Area pickups.  These are stacked-coil hum
23 reducing pickups in the standard strat single-coil pickup form factor.  The 
24 chosen "standard" set consists of:
25
26 * [Area 58](http://dimarzio.com/pickups/strat/hum-canceling-strat/area-58)
27   for the neck position
28 * [Area 67](http://dimarzio.com/pickups/strat/hum-canceling-strat/area-67)
29   for the middle position
30 * [Area 61](http://dimarzio.com/pickups/strat/hum-canceling-strat/area-61)
31   for the bridge position
32
33 The rest of the parts were mostly obtained from 
34 [Guitar Fetish](http://www.guitarfetish.com/), with the exception of a nicer
35 [hard-tail bridge](http://guitarheads.net/products/bridges/hardtailrear.html)
36 sourced from [GuitarHeads.Net](http://guitarheads.net), and a 22-fret natural
37 Canadian maple neck purchased from eBay seller "bluelink88".
38
39 More to come!