summary |
shortlog | log |
commit |
commitdiff |
tree
first ⋅ prev ⋅ next
Bdale Garbee [Mon, 21 Jan 2013 03:02:00 +0000 (19:02 -0800)]
replace SMA with new footprint
Keith Packard [Mon, 21 Jan 2013 02:56:50 +0000 (18:56 -0800)]
Apply 3.3k FET pull-downs to PCB
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 20 Jan 2013 11:27:07 +0000 (03:27 -0800)]
Create power plane flood for v_lipo.
This routes v_lipo to the ejection charges via the power plane rather
than traces on the bottom of the board.
Also added a larger silk rectangle for the serial number and moved the
'pwr' label over by the power switch
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 21 Jan 2013 00:47:18 +0000 (16:47 -0800)]
Switch to MS5607 baro sensor. Add flash memory
Start on v2.0 design. This includes an MS5607 baro sensor for improved
range and accuracy along with a 2MB flash memory part for increased
flight log storage.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sun, 20 Jan 2013 20:43:30 +0000 (13:43 -0700)]
update copyright to 2013
Bdale Garbee [Sat, 24 Nov 2012 21:26:03 +0000 (14:26 -0700)]
switch to ../altusmetrumllc symbols
Bdale Garbee [Mon, 15 Oct 2012 14:52:21 +0000 (08:52 -0600)]
move to 3.3k pull-downs on igniter circuits
Bdale Garbee [Tue, 7 Jun 2011 15:53:26 +0000 (09:53 -0600)]
explicitly do not include frontsilk in the zip file .. the refdes info is not
particularly useful and is completely illegible on this board
Bdale Garbee [Mon, 6 Jun 2011 02:09:26 +0000 (20:09 -0600)]
update version to 1.0 in anticipation of sending out for production quotes
add 'pwr' to silkscreen adjacent to power switch wire holes
Bdale Garbee [Fri, 13 May 2011 21:11:37 +0000 (15:11 -0600)]
add apogee / main labels to silk screen
Bdale Garbee [Tue, 26 Apr 2011 03:16:08 +0000 (21:16 -0600)]
fix attributes on power switch footprint
Bdale Garbee [Tue, 26 Apr 2011 03:03:52 +0000 (21:03 -0600)]
mark mounting holes as noload
Bdale Garbee [Thu, 21 Apr 2011 22:47:29 +0000 (16:47 -0600)]
add silkscreen rectangle for serial number
Bdale Garbee [Thu, 21 Apr 2011 22:42:17 +0000 (16:42 -0600)]
add 100uF ballast cap on 3.3V rail, update silkscreen version and copyright
Bdale Garbee [Tue, 19 Apr 2011 07:47:33 +0000 (01:47 -0600)]
update digikey part number of debug footprint mating header
Bdale Garbee [Tue, 19 Apr 2011 07:45:14 +0000 (01:45 -0600)]
change debug connector to 50 mil pitch
Bdale Garbee [Tue, 15 Mar 2011 13:37:02 +0000 (14:37 +0100)]
more copper shoving to add a "guard trace" at ground between the oscillator
body and the RF filters
Bdale Garbee [Tue, 15 Mar 2011 13:13:21 +0000 (14:13 +0100)]
move oscillator as far west as possible to try and reduce crosstalk with TX
Bdale Garbee [Tue, 23 Nov 2010 06:28:28 +0000 (23:28 -0700)]
hide top silk again
Bdale Garbee [Tue, 23 Nov 2010 06:18:17 +0000 (23:18 -0700)]
make sure all silk elements are within board outline
Bdale Garbee [Tue, 23 Nov 2010 05:51:17 +0000 (22:51 -0700)]
add outline layer, center ground plane polygon
Bdale Garbee [Thu, 18 Nov 2010 23:19:31 +0000 (16:19 -0700)]
lose C9 as redundant on this tight layout
Bdale Garbee [Thu, 18 Nov 2010 23:00:18 +0000 (16:00 -0700)]
update to reflect footprint name change
Bdale Garbee [Thu, 11 Nov 2010 10:25:49 +0000 (03:25 -0700)]
add targets for automating outputs
Bdale Garbee [Thu, 11 Nov 2010 08:38:37 +0000 (01:38 -0700)]
add attributes
Bdale Garbee [Thu, 11 Nov 2010 08:27:12 +0000 (01:27 -0700)]
more copper shoving to reduce impedance in the pyro firing circuit
Bdale Garbee [Thu, 11 Nov 2010 07:59:17 +0000 (00:59 -0700)]
component move to improve bypass capacitor placement relative to regulator
Bdale Garbee [Thu, 11 Nov 2010 00:21:53 +0000 (17:21 -0700)]
fix reset circuit component values to match TeleMetrum v0.1, and shove a lot
of copper around making things a bit less chaotic and leaving the ground
plane more intact
Bdale Garbee [Wed, 10 Nov 2010 18:13:44 +0000 (11:13 -0700)]
no remaining DRC errors
Bdale Garbee [Tue, 9 Nov 2010 05:16:45 +0000 (22:16 -0700)]
route complete, 16 DRC errors
Bdale Garbee [Mon, 8 Nov 2010 20:11:37 +0000 (13:11 -0700)]
This is a TeleNano but with dual deployment .. calling it TeleMini since it
falls between TeleNano and TeleMetrum... ;-)
Bdale Garbee [Mon, 8 Nov 2010 19:46:09 +0000 (12:46 -0700)]
change project name to TeleMini
Bdale Garbee [Mon, 8 Nov 2010 04:57:11 +0000 (21:57 -0700)]
lose junk file accidentally included
Bdale Garbee [Mon, 8 Nov 2010 04:56:48 +0000 (21:56 -0700)]
initial design import