hw/telemetrum
2008-12-20 Bdale Garbeeadd pin one spots in silkscreen for ICs that didn't...
2008-12-20 Bdale Garbeeupdate reference designators in pcb, and clean up resul...
2008-12-20 Bdale Garbeeupdated reference designators on schematic
2008-12-20 Bdale Garbeeadd project name, copyright, and license assertion...
2008-12-19 Bdale Garbeeno showstoppers in freedfm.com output any more
2008-12-19 Bdale Garbeefix up a couple pad and mask dimension issues
2008-12-19 Bdale Garbeeadd solder mask clearance holes for all vias, fix sma...
2008-12-18 Bdale Garbeerestore footprint attributes for the FETs
2008-12-18 Bdale Garbeemove temp sensor to avoid cp2103 debug interface when...
2008-12-17 Bdale Garbeeadd TAPR OHL license file
2008-12-15 Bdale Garbeepasses DRC in pcb, sent out to freedfm.com for analysis
2008-12-13 Bdale Garbeedual ejection connector footprints, picoblade or screw...
2008-12-11 Bdale Garbeemove to four mounting holes, vertical battery connector
2008-12-11 Bdale Garbeereplaced serial connector with vertical through-hole...
2008-12-11 Bdale Garbeepreparing to play some layout mind-games
2008-12-08 Bdale Garbeeadd test points to two unconnected pins, fix pin number...
2008-12-08 Bdale Garbeeworking on pcb layout, initial parts placement done
2008-12-07 Bdale Garbeerename project to 'telemetrum'
2008-12-05 Bdale Garbeetweaking footprints, etc, as we get close to starting...
2008-12-05 Bdale Garbeeadd attributes to the new charge pump chip
2008-12-05 Bdale Garbeesort reference designators in bill of materials
2008-12-05 Bdale Garbeeswitch 5V regulator to LTC part, use 33mA of its capaci...
2008-12-04 Bdale Garbeeresequence ADC inputs to put highest rep rates on lowes...
2008-12-04 Bdale Garbeere-arrange pins to route both e-match sense lines to...
2008-12-04 Bdale Garbeechanges in schematic inspired by PSAS design review...
2008-11-30 Bdale Garbeethe MN5010HS needs more current than we can provide...
2008-11-29 Bdale Garbeechange serial port to a 4-pin connector with 3.3VDC...
2008-11-18 Bdale Garbeesnapshot before removing 18g accelerometer
2008-11-18 Bdale Garbeeadding 50g accelerometer circuit back in
2008-11-18 Bdale Garbeesnapshot before insertion
2008-11-10 Bdale GarbeeDigiKey part numbers for everything, some footprints...
2008-11-09 Bdale Garbeefunctionally complete, perhaps? messy designators...
2008-11-08 Bdale Garbeecpu section more or less complete
2008-11-08 Bdale Garbeeinitial snapshot after moving out of openalt directory