hw/telegps
2016-05-16 Keith PackardSwitch to STM processor highpower
2016-05-16 Keith PackardSwitch to shared makefile
2015-12-15 Keith PackardUpdate product name on PCB
2015-12-15 Keith PackardHigh power variant
2014-04-11 Bdale Garbeemark through-hole parts as no-load .. connector out... fab-v1.0
2014-04-11 Bdale Garbeeupdate attributes to reflect current part availability
2014-04-11 Bdale Garbeedon't include top silk, it's just a mess
2014-04-11 Bdale Garbeelots of copper tweaking for manufacturability
2014-03-18 Bdale Garbeefixed all issues raised by freedfm that we don't expect...
2014-03-18 Bdale Garbeeupdate attributes, clean up some copper nasties
2014-03-14 Bdale Garbeefix layer grouping to match our normal stack
2014-03-14 Bdale Garbeemove divider far away from mounting screws
2014-03-14 Bdale Garbeeroll versions to 1.0, copyrights to 2014
2014-03-14 Bdale Garbeeadd ability to measure LiPo voltage
2014-03-01 Bdale Garbeemove to standardized makefile
2013-11-25 Keith PackardMove refdes around on the silk
2013-11-24 Keith PackardLoad and save with newer version of pcb
2013-11-24 Bdale Garbeeadd more silk
2013-11-24 Bdale Garbeemove to smaller debug connector, add company name to...
2013-11-24 Keith PackardShrink debug connector holes
2013-11-24 Bdale Garbeeremove out-of-date bom notes from original design
2013-11-24 Bdale Garbeelose local symbols directory cruft
2013-11-24 Bdale Garbeeupdate layout to use SOIJ8 memory footprint, lots of...
2013-11-24 Bdale Garbeechange flash part out for our standard SOIJ8 footprint...
2013-11-23 Bdale Garbeeroute complete and DRC clean
2013-11-23 Bdale Garbeeworking on plane back from PVR
2013-11-16 Bdale Garbeechange to right angle, through-hole, LiPo connector
2013-08-09 Bdale Garbeeadd stencil target to the Makefile
2013-08-09 Bdale Garbeehack passive patch footprint to solve DRC issues with... minimal fab-phoenix
2013-08-04 Keith PackardSwitch to title-D. Use Panasonic resistors.
2013-07-08 Keith PackardClean up GPS RF input routing
2013-07-07 Keith PackardAdd SAW filter to GPS input
2013-07-03 Keith PackardTie USB pull-up to pin 16 (pio0_7)
2013-07-02 Keith PackardFix flash USON footprint (was mirrored)
2013-06-18 Keith PackardAdjust GPS antenna trace to avoid width changes
2013-06-13 Keith PackardSwitch GPS patch to Taoglas GP.1575.18.4.A.02
2013-06-07 Keith PackardLayout PCB for minimal TeleGPS version
2013-06-06 Keith PackardA completely minimal design
2013-06-05 Keith PackardEliminate PA
2013-05-01 Keith PackardUpdate DK numbers to use currently available parts
2013-04-24 Keith PackardFix CC115L DCOUPL cap value - should be 0.1uF, not...
2013-04-11 Keith PackardOpen up clearance around STM ground VIAs to 6mils re-plan fab-v0.2
2013-04-02 Keith PackardFix for 6/6 trace/space rules
2013-04-02 Keith PackardLayout new power filtering bits
2013-04-02 Keith PackardCreate a wedge for the GPS RF connection
2013-04-02 Keith PackardAdd RF filter before LDO. Add 470pF for GPS battery...
2013-04-02 Keith PackardAdd bypass and RFI cap to SD. Move SD E.
2013-04-01 Keith PackardRe-work the floor plan.
2013-03-31 Keith PackardFix solder mask around GPS antenna pads
2013-03-31 Keith PackardMove GPS chip to align RF input with antenna. Change...
2013-03-31 Keith PackardAdd 0-ohm resistor in the reset_n line to the GPS chip
2013-03-31 Keith PackardRemove the 'fullpoly' flag. Add some ground floods.
2013-03-30 Keith PackardClean up a few routes
2013-03-30 Keith PackardClean up generation of gerb files
2013-03-30 Keith PackardReplace Skytraq GPS with U-Blox
2013-03-26 Bdale GarbeeMerge branch 'master' of ssh://git.gag.com/scm/git...
2013-03-26 Bdale Garbeemove all datasheets to the altusmetrum shared repo
2013-03-21 Keith PackardShrink silk text for element labels. Shuffle around.
2013-03-21 Keith PackardShuffle text around a bit
2013-03-21 Keith PackardAdd status LED to PCB. Shrink VIA clearance to 6.00mil
2013-03-21 Keith PackardAdd status LED
2013-03-21 Keith PackardMove packages to altusmetrum shared repo
2013-03-21 Keith PackardSwitch to altusmetrum component directory
2013-03-21 Keith PackardMove components away from cc115 corners
2013-03-21 Keith PackardEliminate top ground flood under GPS chip
2013-01-27 Keith PackardClean up ground flood on top
2013-01-15 Keith PackardFix clean target to remove more stuff
2013-01-15 Keith PackardUse shared altusmetrum scheme files
2013-01-08 Keith PackardAdd DK numbers for SMA and a couple of caps
2013-01-08 Bdale Garbeeadd pn for power switch screw terminals
2013-01-08 Bdale Garbeeselect inductors
2013-01-06 Bdale Garbeeadd stencil target
2013-01-01 Bdale Garbeeadd DK part number for GPS antenna
2012-12-31 Keith PackardUn-short gnd and gps_gnd fab-v0.1
2012-12-31 Keith PackardNice big serial number patch
2012-12-31 Keith PackardMove top ground plane away from USB cut-out
2012-12-31 Keith PackardIck. Little top ground plane glitch
2012-12-31 Keith PackardMore top ground plane changes
2012-12-31 Keith PackardShove swdio trace right
2012-12-31 Keith PackardRe-flood the top
2012-12-31 Bdale Garbeedrc clean
2012-12-31 Bdale Garbeeswitch to screw terminal power connector, place it...
2012-12-31 Keith PackardMove U7 label to someplace visible
2012-12-31 Keith PackardMove power switch between SD and debug connectors
2012-12-30 Keith PackardFlip debug connector around
2012-12-30 Keith PackardAdd serial port for optional telemetry input
2012-12-29 Bdale Garbeefix stm footprint via to plane clearance issue
2012-12-28 Keith PackardFix filenames to make oshpark happy
2012-12-28 Keith PackardMove U7 label into a reasonable place
2012-12-28 Keith PackardExport gerber files with 'eagle' names. Add copyright...
2012-12-28 Keith PackardAdd a couple of missing packages to git
2012-12-28 Keith PackardUpdate schematic and PCB to include STM-48 QFP pad
2012-12-28 Keith PackardFix STM footprint to include TI-style pad with vias
2012-12-27 Keith PackardFix QFN-16 footprint to meet DRC rules (13mil drill...
2012-12-27 Keith PackardMake freedfm happy about debug alignment hole annular...
2012-12-27 Bdale Garbeepush copper around in the UHF section
2012-12-23 Keith PackardMove another capacitor further from the battery connector
2012-12-23 Keith PackardSwitch to the new SMA footprint
2012-12-22 Keith PackardFinish re-routing after moving TH components to front
2012-12-22 Keith PackardMove TH components to front side
next