# max pin width (perpendicular to axis of package) (1/100 mil)
	# max pin length (parallel to axis of package) (1/100 mil)
	# gap between the pads (1/100 mil)
	# package width (1/100 mil)
	# package height (1/100 mil)
	# component veritcal height off board (1/100 mil)
	# pad width and length
	# y values for drawing the pad.  The Y center of the pad is 0.5*(PINL + PINS)
	# we need a line segment of length PADL - PADW so we have end points:
	# 0.5*(PINL + PINS) +/- 0.5*(PADL - PADW)
	# width of soldermask relief (5 mil on each side)
	# silkscreen width (1/100 mils)
	# how much space to leave around the part before the
	# silk screen (1/100 mils)
	# lower left corner for silk screen (1/100 mil)
	# upper right corner for silk screen (1/100 mil)
	# how much to notch the corners by in silk to indicate polarity
# Element [SFlags "Desc" "Name" "Value" MX MY TX TY TDir TScale TSFlags]
Element[ "" "Description_nichicon_NICHICON_WT_CAP_10_10" "" "`NICHICON_WT_CAP_10_10'" 0 0 0 0 0 100 ""]
(
# Pad [rX1 rY1 rX2 rY2 Thickness Clearance Mask "Name" "Number" SFlags]                                                                                              
Pad[ 0 -20078 0 -11023 6330 1000 7330 "Plus"  "1" "square"]
Pad[ 0  20078 0  11023 6330 1000 7330 "Minus" "2" "square"]
# Silk screen around package
# ElementLine[ x1 y1 x2 y2 width]
ElementLine[ 21969    21969     4465    21969    1000]
ElementLine[ 21969    21969     21969    -18969 1000]
ElementLine[ 21969    -18969  18969 -21969    1000]
ElementLine[ 18969 -21969     4465    -21969    1000]
ElementLine[ -21969    21969    -4465    21969    1000]
ElementLine[ -21969    21969    -21969    -18969 1000]
ElementLine[ -21969    -18969 -18969 -21969    1000]
ElementLine[ -18969 -21969    -4465    -21969    1000]
)