From e4c3e37a6687e4b112c758b64ec94e41317493e6 Mon Sep 17 00:00:00 2001 From: Bdale Garbee Date: Sat, 7 Feb 2015 22:41:19 -0700 Subject: [PATCH] update changelog for Debian build --- debian/changelog | 162 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 162 insertions(+) diff --git a/debian/changelog b/debian/changelog index 99b0d8a6..22efe261 100644 --- a/debian/changelog +++ b/debian/changelog @@ -1,3 +1,165 @@ +altos (1.6-1) unstable; urgency=medium + + [ Keith Packard ] + * altoslib: Stop re-loading previous flight when starting telemetry monitoring + * telegps: Was mis-configuring the 'Configure Device' dialog + * altos: Fix ability to disable telemetry by setting interval to 0 + * altos/test: Add TMv2 test program to .gitignore + * altos: Add smaller altitude table file to .gitignore + * altos: Make sure we don't beep out continuity twice in idle mode + * altosui: Ignore built .desktop file + * ao-bringup: Use C version of test-flash for telegps + * ao-tools: Add ao-test-gps program + * ao-bringup: Use C version of ao-test-gps in test-telegps + * ao-tools/ao-test-gps: Improve output formatting + * ao-tools/ao-test-igniter: Remove bogus printf + * ao-bringup: Improve igniter testing. Add TeleMega and TeleMetrum testing. + * Mark master branch as past the 1.5 point + * altosdroid: Update version code and name for 1.5 + * altosdroid: Automatically sign the released version if the key is available + * altosui: Fix --replay to run in realtime after boost + * altosui: Bring up main window when doing --replay or --graph + * altosdroid: Update notebook to reflect current status + * altos: Make sure we drop the SPI mutex when aborting cc1120 recv + * ao-bringup: Auto-select programmer for teledongle turnon + * altos: Handle antenna down in ao_flight_test + * altosui: Check for map and stats table when changing units/fonts in graph + * altos: Record 32-bits for gyro calibration values + * altoslib: Deal with new Mega log format that has 32-bit gyro cal + * altosui: Update 'Imperial Units' checkbox when units change + * altoslib: Compute tilt angle from eeprom data + * altos: Fix syntax error with ao_log_mega change. + * altos: Copy cc1120 driver to cc1200 driver and hack a bit + * altos: Add prototype TeleDongle v1.9 code + * altoslib: synchronize access to serial debug output list + * altosuilib: Try to detect the architecture when loading JNI lib + * ao-tools/ao-send-telem: Add verbose, fake and rate options + * altos: Mark STM ao_spi_send as taking const pointer + * altos: Expose telemetry altitude macros even without GPS + * altos: Complete cc1200 driver + * altos/teledongle-v1.9: Add remaining code to complete the project + * altos: Sort out ao_gps_print altitude fetching + * altos: Increase PQT value for cc1200 improving sensitivity + * altos: Build TeleDongle v1.9 by default + * altos: Remove old AO_SEND_ALL_BARO bits + * altos: Perform cc1200 calibration less often. Tweak radio params + * altos: Fix up telemetry delay computations + * altos: Increase CC1200 SPI data rate to 8MHz + * altosui: Pop up 'Connecting' dialog during Monitor Idle + * altos: Rename microwater to microsplash + * Move teledongle 1.9 to 1.8; there's a new 1.9 + * altos: Declare port register type only in arch header + * altos: Stop attempting to ramp power on CC115L + * altos: Use AO_SPO_SPEED_FAST for CC1200 + * altosuilib: GPS errors are recorded in floating point, not integers + * altos: Use other TeleDongle LED for CRC-invalid packet reporting + * altos/lpc: Declare SPI send parameters as const + * altos/lpc: Disable JTAG when using pins for GPIO + * altos/teledongle-v1.9: Switch to NXP processor as on prototype boards + * altos: Reset interrupt flags before TX in CC1200 driver + * altoslib: Missing headers for mag sensor in CSV output + * altoslib: Make AltosState serializable + * altosdroid: Don't display MISSING flight number + * altoslib: Add getBytes/putBytes interface to AltosPreferencesBackend + * altosdroid: TabMap needs to expose () constructor + * altoslib: add AltosPreferences state save/restore interfaces + * altosdroid: Save AltosState and restore at startup + * altosdroid: East and West were flipped in all GPS output + * Add AltosDroid release note for version 1.5 + * altos/microsplash: fix .gitignore to ignore resulting binary + * altosui: Remove duplicate AltosUIPreferencesBackend.java + * altos: Allow TeleMega to be built without MPU6000 + * altos/teledongle-v1.8: Make this the same as teledongle v1.9 + * altos/cc1200: Wait for packet to be placed in FIFO during receive + * altos/cc1200: Open up preamble detect to improve sensitivity + * altos/cc1200: With PQT wide open, we can't use PQT_REACHED for start + * altoslib: Add usbtrng, usbrelay and mpusb USB ids + * micropeak: Support µPUSB with our own USB ids + * ao-bringup: Clear pending output before setting frequency. + * altos: Document cc115l power measured at RF setting 0x03 as -31.75dBm + * altos: Adjust CC1200 RSSI reporting value + * altos/lpc: Switch LPC SPI driver to interrupt-driven + * Set version to 1.5.9.1 + * altos: Get rid of some accidental debug code + * altos/lpc: Fix double-buffered USB changes + * altos: Add support for TeleBT v3.0 + * altos: Initial STMF04x support + * altos: USBtrng v2.0 hardware bringup + * altos: Add self-flash support for STM32F042 processor + * altos: Add flash-loader to usbtrng-v2.0 + * ao-tools: Add --wait option to ao-usbload + * altos/stmf0: Fix linker scripts to make ao_boot work + * altos/stmf0: Add faster USB path + * altos/stmf0: Add ADC and DMA APIs + * altos/usbtrng-v2.0: Add random output command + * altos/stm: Fix typo in stm32l.h + * ao-tools: Add ao-usbtrng to dump RNG data for testing + * altos/stmf0: Remove remaining stm32l bits from stm32f0 code + * altos/stmf0: Add CRC driver + * altos/usbtrng-v2.0: Use stmf042 hardware CRC unit + * altos/stmf0: Re-implement fast ADC code for stmf0 + * Oops, forgot the TeleBT-v3.0 Makefile + * And, also add the TeleBT v3.0 flash loader Makefile + * altos/stm: Add ability to delay STDIO usage for serial ports + * altos/btm: Add fancier debug. Pull serial reset port low. + * altos: Always include a check for stdio overflow + * altos/telebt-v3.0: Fix stdio setup for BTM + * altos/telebt-v3.0: Turn red LED off after initialization + * altos/stmf0: Support PA11/PA12 remapping + * altos/usbtrng-v2.0: Select PA11/PA12 mapping config value + * altos/telebt-v3.0: Add monitor bits + * altos/telebt-v3.0: Set initial radio cal to a sensible value + * altos: Rename teledongle-v1.9 as teledongle-v3.0 + * ao-bringup: Add turnon_teledonglev3 + * Revert "altos/lpc: Fix double-buffered USB changes" + * Revert LPC usb performance improvements + * altos/teledongle-v3.0: Shrink stacks to 320 bytes to fit in ram + * altos/easymini-v1.0: Shrink stack to deal with USB changes + * altos/lpc: Clean up USB endpoint access functions + * altos/lpc: Double buffer USB data transfers + * Update docs for 1.6 + * libaltos: Use more SetupDi API to get Windows 7 listing devices + * Add 'keithp-fat' target for uploading temporary builds to keithp's machine + * windows: Look for current Java version in \SOFTWARE\Wow6432Node + * micropeak: Fix file association registry install on Windows + * micropeak: Support both FTDI and Altus Metrum USB IDs + * micropeak: Install Windows AltusMetrum driver bits + * altosuilib: New teledongle and telebt devices are not pair-programmed + * Package TeleDongle-v3.0 firmware with TeleGPS and AltosUI apps + * altoslib: Store MS5607 data in AltosConfigData for use by AltosMs5607 + * altosuilib: EEProm download from TeleGPS doesn't have states + * altosuilib: Don't show 'Sats in view' for TeleGPS eeprom graphing + * altoslib: Support TeleGPS for Monitor Idle + * altoslib: Use 'stateless' for Monitor Idle + * altoslib: Initialize GPS data to MISSING for Monitor Idle mode + * altos/drivers: Increase SPI speed of CC115L to 6MHz + * altos/lpc: Give up on interrupt-driven SPI driver + * altos: Separate out ao_tracker force from dbg + * Update version 1.6 release notes with more bug fixes + * altos: ao_packet_getchar needs to return 'int' so AO_READ_AGAIN works + * altosui: Remove the dregs of AltosDroid load-old-telem code + * altoslib: Mark listener as 'not running' on EOF. + * altosuilib: Wait for product data while scanning + * altoslib: Drop telemetry packets processed while monitoring is disabled + * altosuilib: Reset telemetry state after processing it + * altoslib: Clear saved TelemetryReader state instead of resetting in ScanUI + * altosuilib: Set the icon and title of the telemetry scanning dialog + * doc: update 1.6 release notes with recent bug fixes + * altosuilib: Get the Eeprom download progress bar working again + * altosuilib: Don't offer to graph some GPS details that TM doesn't log + * Bump java library versions + + [ Bdale Garbee ] + * updated to reflect changes from 1.5 release + * reflect filename changes in LLC repo + * store cal value correctly even when we didn't need to change it + * document pyro current limits in an appendix + * improve test procedures for TeleMega + * document addition of TeleDongle to the set of ARM targets to save binaries for + * update ChangeLog for release + + -- Bdale Garbee Sat, 07 Feb 2015 22:40:49 -0700 + altos (1.5-1) unstable; urgency=medium [ Bdale Garbee ] -- 2.30.2