From c57a5c018e4bd0a0033c8759132a648977bf45f7 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Mon, 24 Apr 2017 15:59:23 -0700 Subject: [PATCH] doc: Errors in the TeleMini v3.0 updates found by Bdale Signed-off-by: Keith Packard --- doc/altusmetrum-docinfo.xml | 2 +- doc/system-operation.inc | 10 +++++----- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/doc/altusmetrum-docinfo.xml b/doc/altusmetrum-docinfo.xml index 6214cfd8..65519bb2 100644 --- a/doc/altusmetrum-docinfo.xml +++ b/doc/altusmetrum-docinfo.xml @@ -50,7 +50,7 @@ 1.7 21 Apr 2017 - Add support for TeleMini in firmware, AltosUI and AltosDroid + Add support for TeleMini v3.0 in firmware, AltosUI and AltosDroid diff --git a/doc/system-operation.inc b/doc/system-operation.inc index 67b7e693..17dfdf89 100644 --- a/doc/system-operation.inc +++ b/doc/system-operation.inc @@ -26,8 +26,8 @@ otherwise the board enters “flight” mode. ifdef::telemini[] TeleMini - selects “idle” mode if receives a command packet is - received within the + selects “idle” mode if it receives a command packet + within the first five seconds of operation. endif::telemini[] @@ -61,7 +61,7 @@ mode for requests sent via TeleDongle. Commands can be issued in idle mode over either USB or the radio link equivalently. - ifdef::telemini[TeleMini only have the radio link.] + ifdef::telemini[TeleMini only has the radio link.] endif::radio[] Idle mode is useful for configuring the altimeter, for extracting data from the on-board storage chip after @@ -98,7 +98,7 @@ endif::telemetrum,telemega,easymega[] ifdef::telemini[] - TeleMini are configured solely via the radio link. Of course, that + TeleMini is configured solely via the radio link. Of course, that means you need to know the TeleMini radio configuration values or you won't be able to communicate with it. For situations when you don't have the radio configuration values, @@ -157,7 +157,7 @@ Any operation which can be performed with a flight computer can either be done with the device directly connected to the computer via the USB cable, or through the radio - link. TeleMini don't provide a USB connector and so it is + link. TeleMini doesn't provide a USB connector and so it is always communicated with over radio. Select the appropriate TeleDongle device when the list of devices is presented and AltosUI will interact with an altimeter over the radio link. -- 2.30.2