From 84d5e00d417af4924594908d19346bb965089cdd Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Mon, 16 Jul 2012 14:44:40 -0700 Subject: [PATCH] src: Add driver for AVR internal eeprom. Use for telepyro config. Signed-off-by: Keith Packard --- src/avr/ao_eeprom_avr.c | 133 +++++++++++++++++++++++++++++++++++++ src/avr/ao_pins.h | 6 ++ src/telepyro-v0.1/Makefile | 16 +++-- 3 files changed, 148 insertions(+), 7 deletions(-) create mode 100644 src/avr/ao_eeprom_avr.c diff --git a/src/avr/ao_eeprom_avr.c b/src/avr/ao_eeprom_avr.c new file mode 100644 index 00000000..2451fa8a --- /dev/null +++ b/src/avr/ao_eeprom_avr.c @@ -0,0 +1,133 @@ +/* + * Copyright © 2012 Keith Packard + * Copyright © 2011 Anthony Towns + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + */ + +#include +#include + +/* Total bytes of available storage */ +__pdata ao_pos_t ao_storage_total = 1024; + +/* Block size - device is erased in these units. */ +__pdata ao_pos_t ao_storage_block = 1024; + +/* Byte offset of config block. Will be ao_storage_block bytes long */ +__pdata ao_pos_t ao_storage_config = 0; + +/* Storage unit size - device reads and writes must be within blocks of this size. */ +__pdata uint16_t ao_storage_unit = 1024; + +/* + * The internal flash chip is arranged in 8 byte sectors; the + * chip cannot erase in units smaller than that. + * + * Writing happens in units of 2 bytes and + * can only change bits from 1 to 0. So, you can rewrite + * the same contents, or append to an existing page easily enough + */ + +/* + * Erase the specified sector + */ +uint8_t +ao_storage_erase(ao_pos_t pos) __reentrant +{ + /* Not necessary */ + return 1; +} + +#define ao_intflash_wait_idle() do { \ + /* Wait for any outstanding writes to complete */ \ + while (EECR & (1 << EEPE)) \ + ; \ + } while (0) \ + +static void +ao_intflash_write(uint16_t pos, uint8_t d) +{ + ao_intflash_wait_idle(); + EEAR = pos; + EEDR = d; + ao_arch_critical( + EECR |= (1 << EEMPE); + EECR |= (1 << EEPE); + ); +} + +static uint8_t +ao_intflash_read(uint16_t pos) +{ + ao_intflash_wait_idle(); + EEAR = pos; + + EECR |= (1 << EERE); + return EEDR; +} +/* + * Write to flash + */ + +uint8_t +ao_storage_device_write(ao_pos_t pos32, __xdata void *v, uint16_t len) __reentrant +{ + uint16_t pos = pos32; + __xdata uint8_t *d = v; + + if (pos >= ao_storage_total || pos + len > ao_storage_total) + return 0; + + while (len--) + ao_intflash_write(pos++, *d++); + + return 1; +} + +/* + * Read from flash + */ +uint8_t +ao_storage_device_read(ao_pos_t pos, __xdata void *v, uint16_t len) __reentrant +{ + uint8_t *d = v; + + if (pos >= ao_storage_total || pos + len > ao_storage_total) + return 0; + while (len--) + *d++ = ao_intflash_read(pos++); + return 1; +} + +void +ao_storage_flush(void) __reentrant +{ +} + +void +ao_storage_setup(void) +{ +} + +void +ao_storage_device_info(void) __reentrant +{ + printf ("Using internal flash\n"); +} + +void +ao_storage_device_init(void) +{ +} diff --git a/src/avr/ao_pins.h b/src/avr/ao_pins.h index 850a08ec..3c9010a8 100644 --- a/src/avr/ao_pins.h +++ b/src/avr/ao_pins.h @@ -72,6 +72,12 @@ #define HAS_ADC 1 #define PACKET_HAS_SLAVE 0 #define HAS_BEEP 0 + #define HAS_EEPROM 1 + #define USE_INTERNAL_FLASH 1 + #define DISABLE_HELP 1 + #define HAS_STORAGE_DEBUG 0 + #define IS_COMPANION 1 + #define ao_storage_pos_t uint16_t #define AVR_VCC_5V 0 #define AVR_VCC_3V3 1 diff --git a/src/telepyro-v0.1/Makefile b/src/telepyro-v0.1/Makefile index 2ac7e747..bc57b9d7 100644 --- a/src/telepyro-v0.1/Makefile +++ b/src/telepyro-v0.1/Makefile @@ -22,7 +22,8 @@ INC = \ ao.h \ ao_usb.h \ ao_pins.h \ - altitude.h + ao_arch.h \ + ao_arch_funcs.h ALTOS_SRC = \ ao_clock.c \ @@ -39,14 +40,18 @@ ALTOS_SRC = \ ao_usb_avr.c \ ao_adc_avr.c \ ao_pyro_slave.c \ - ao_spi_slave.c + ao_spi_slave.c \ + ao_eeprom_avr.c \ + ao_storage.c \ + ao_config.c \ + ao_pyro.c PRODUCT=TelePyro-v0.1 MCU=atmega32u4 PRODUCT_DEF=-DTELEPYRO IDPRODUCT=0x0011 CFLAGS = $(PRODUCT_DEF) -I. -I../avr -I../core -I.. -CFLAGS += -g -mmcu=$(MCU) -Wall -Wstrict-prototypes -O3 -mcall-prologues -DAVR +CFLAGS += -mmcu=$(MCU) -Wall -Wstrict-prototypes -O3 -mcall-prologues -DAVR NICKLE=nickle @@ -79,9 +84,6 @@ $(PROG).hex: $(PROG) load: $(PROG).hex $(LOADCMD) $(LOADARG)$(PROG).hex -../altitude.h: make-altitude - nickle $< > $@ - ao_product.h: ao-make-product.5c ../Version $(call quiet,NICKLE,$<) $< -m altusmetrum.org -i $(IDPRODUCT) -p $(PRODUCT) -v $(VERSION) > $@ @@ -100,4 +102,4 @@ install: uninstall: -$(OBJ): ao.h ao_product.h ao_usb.h +$(OBJ): $(INC) -- 2.30.2