fw/altos
23 months agoaltos: Wait for companion to see CS before attempting communcation companion-delay
Keith Packard [Mon, 15 Oct 2012 01:50:45 +0000 (18:50 -0700)]
altos: Wait for companion to see CS before attempting communcation

The AVR just can't go fast enough to see the CS in time, so pause for
a while.

(rewritten from f9607fb76c22187396cceb46b745fa1485d4f155)

Signed-off-by: Keith Packard <keithp@keithp.com>

23 months agoaltos/test: Display MPU6000 values in ao_flight_test_mm output
Keith Packard [Sat, 13 Oct 2012 22:04:46 +0000 (15:04 -0700)]
altos/test: Display MPU6000 values in ao_flight_test_mm output

No computation yet, just making the values visible in the output

Signed-off-by: Keith Packard <keithp@keithp.com>

23 months agoaltos: Define full-scale gyro and accel values for MPU6000
Keith Packard [Sat, 13 Oct 2012 22:04:00 +0000 (15:04 -0700)]
altos: Define full-scale gyro and accel values for MPU6000

This lets other code convert MPU6000 readings into canonical units

Signed-off-by: Keith Packard <keithp@keithp.com>

23 months agoaltos: When missing MMA655x, create fake Z accel value
Keith Packard [Sat, 13 Oct 2012 22:02:42 +0000 (15:02 -0700)]
altos: When missing MMA655x, create fake Z accel value

This avoids overwriting the MPU6000 y acceleration value so that other
computations using that value can work unmodified.

Signed-off-by: Keith Packard <keithp@keithp.com>

23 months agoaltos/test: Add ao_flight_test_mm
Keith Packard [Sat, 13 Oct 2012 20:39:03 +0000 (13:39 -0700)]
altos/test: Add ao_flight_test_mm

This reads mega metrum eeprom files and runs the flight code over it

Signed-off-by: Keith Packard <keithp@keithp.com>

23 months agoaltos: Eliminate implicit 1 byte offset in uint16/int16 functions
Keith Packard [Sat, 13 Oct 2012 20:37:29 +0000 (13:37 -0700)]
altos: Eliminate implicit 1 byte offset in uint16/int16 functions

Make callers explicitly compute the full offset

Signed-off-by: Keith Packard <keithp@keithp.com>

23 months agoaltos: Split out ms5607 conversion code for use in ao_flight_test
Keith Packard [Sat, 13 Oct 2012 20:35:42 +0000 (13:35 -0700)]
altos: Split out ms5607 conversion code for use in ao_flight_test

Makes the conversion code available even where the driver isn't needed

Signed-off-by: Keith Packard <keithp@keithp.com>

23 months agoaltos: struct ao_log_mega doesn't have a ground temp value
Keith Packard [Sat, 13 Oct 2012 20:34:28 +0000 (13:34 -0700)]
altos: struct ao_log_mega doesn't have a ground temp value

There's no averaged ground temperature recorded in the flight system
to save there, so just remove the field

Signed-off-by: Keith Packard <keithp@keithp.com>

23 months agoaltos: Document a few member offsets in struct ao_log_record
Keith Packard [Sat, 13 Oct 2012 20:33:45 +0000 (13:33 -0700)]
altos: Document a few member offsets in struct ao_log_record

Incomplete, but useful even so

Signed-off-by: Keith Packard <keithp@keithp.com>

23 months agoaltosui: Parse .mega files from command line
Keith Packard [Sat, 13 Oct 2012 20:32:56 +0000 (13:32 -0700)]
altosui: Parse .mega files from command line

Signed-off-by: Keith Packard <keithp@keithp.com>

23 months agoaltos: Add .gitignore for micropeak
Keith Packard [Fri, 12 Oct 2012 21:27:14 +0000 (14:27 -0700)]
altos: Add .gitignore for micropeak

Signed-off-by: Keith Packard <keithp@keithp.com>

23 months agoaltos: Add (untested) driver for AT24C i2c flash parts
Keith Packard [Fri, 12 Oct 2012 21:26:08 +0000 (14:26 -0700)]
altos: Add (untested) driver for AT24C i2c flash parts

Signed-off-by: Keith Packard <keithp@keithp.com>

23 months agoaltos: Add initial micropeak implementation
Keith Packard [Fri, 12 Oct 2012 21:22:41 +0000 (14:22 -0700)]
altos: Add initial micropeak implementation

Blinks out max height in decimeters, stores previous flight data to
internal eeprom.

Signed-off-by: Keith Packard <keithp@keithp.com>

23 months agoaltos: Allow products to define which LED to panic with
Keith Packard [Fri, 12 Oct 2012 21:18:37 +0000 (14:18 -0700)]
altos: Allow products to define which LED to panic with

Continue to use AO_LED_RED by default.

Signed-off-by: Keith Packard <keithp@keithp.com>

23 months agoaltos: Megametrum uses altitude-pa.h, not altitude.h
Keith Packard [Fri, 12 Oct 2012 21:08:19 +0000 (14:08 -0700)]
altos: Megametrum uses altitude-pa.h, not altitude.h

Make sure megametrum gets rebuilt as needed when the various
altitude-pa related files change

Signed-off-by: Keith Packard <keithp@keithp.com>

23 months agoaltos: Add attiny architecture files
Keith Packard [Fri, 12 Oct 2012 21:04:57 +0000 (14:04 -0700)]
altos: Add attiny architecture files

These are designed to work with the ATtiny85 processor, but can
presuambly be easily adapted to others in that series

Signed-off-by: Keith Packard <keithp@keithp.com>

23 months agoaltos: Include struct ao_data declaration only when used
Keith Packard [Fri, 12 Oct 2012 21:03:28 +0000 (14:03 -0700)]
altos: Include struct ao_data declaration only when used

Leave it out for products that don't have a ring of sensor data

Signed-off-by: Keith Packard <keithp@keithp.com>

23 months agoaltos: Clean up types in Pa conversion testing code. Only test to 40km
Keith Packard [Fri, 12 Oct 2012 21:02:29 +0000 (14:02 -0700)]
altos: Clean up types in Pa conversion testing code. Only test to 40km

A couple of missing 'int' declarations.
Only test to 40km as above that there aren't enough data points to do
anything reasonable

Signed-off-by: Keith Packard <keithp@keithp.com>

23 months agoaltos: Elide ao_altitude_to_pa in flight firmware
Keith Packard [Fri, 12 Oct 2012 21:01:16 +0000 (14:01 -0700)]
altos: Elide ao_altitude_to_pa in flight firmware

Only the conversion testing code needs to get back from altitude to
pressure, so don't include that code in other environments.

Signed-off-by: Keith Packard <keithp@keithp.com>

23 months agoaltos: Parameterize altitude table access and initialization
Keith Packard [Fri, 12 Oct 2012 20:59:50 +0000 (13:59 -0700)]
altos: Parameterize altitude table access and initialization

This allows projects to store the altitude data in different
representations or with different access modes.

By default, altitude data is stored in meters, but the initializers
include decimeter values so those can be used instead if desired.

Signed-off-by: Keith Packard <keithp@keithp.com>

23 months agoaltos: Use alt_t for all Pascal-based altitude data
Keith Packard [Fri, 12 Oct 2012 20:57:49 +0000 (13:57 -0700)]
altos: Use alt_t for all Pascal-based altitude data

This allows alt_t to be overridden for systems using the MS5607/MS5611
sensors

Signed-off-by: Keith Packard <keithp@keithp.com>

23 months agoaltos: Allow for other mutex implementations
Keith Packard [Fri, 12 Oct 2012 20:55:33 +0000 (13:55 -0700)]
altos: Allow for other mutex implementations

Allow projects to replace ao_mutex_get and ao_mutex_put with macros

Signed-off-by: Keith Packard <keithp@keithp.com>

23 months agoaltos: Allow projects to specify clock at other than 100Hz
Keith Packard [Fri, 12 Oct 2012 20:54:37 +0000 (13:54 -0700)]
altos: Allow projects to specify clock at other than 100Hz

Leave the default at 100Hz, but allow it to be overridden

Signed-off-by: Keith Packard <keithp@keithp.com>

23 months agoaltos: Prepare ms5607 driver for use in non-tasking products
Keith Packard [Fri, 12 Oct 2012 20:37:07 +0000 (13:37 -0700)]
altos: Prepare ms5607 driver for use in non-tasking products

Micropeak doesn't have tasking, prepare the ms5607 driver for that

Signed-off-by: Keith Packard <keithp@keithp.com>

23 months agoaltos: Split task definitions out to ao_task.h
Keith Packard [Fri, 12 Oct 2012 20:31:17 +0000 (13:31 -0700)]
altos: Split task definitions out to ao_task.h

And only include them if using tasks

Signed-off-by: Keith Packard <keithp@keithp.com>

23 months agoaltos/telefire: Add siren/strobe support
Keith Packard [Wed, 10 Oct 2012 21:28:07 +0000 (14:28 -0700)]
altos/telefire: Add siren/strobe support

This also involved hacking up the code to allow for non-zero offsets
for the pad firing and continuity pins.

Signed-off-by: Keith Packard <keithp@keithp.com>

23 months agoaltos: Compute desired frequency when upgrading from pre-1.1
Keith Packard [Tue, 9 Oct 2012 04:59:55 +0000 (21:59 -0700)]
altos: Compute desired frequency when upgrading from pre-1.1

Instead of just smashing the frequency to 434.550, compute the
frequency from the old radio channel value

Signed-off-by: Keith Packard <keithp@keithp.com>

23 months agoaltos/telefire: Make sure armed alarm goes off on time
Keith Packard [Sun, 7 Oct 2012 01:25:15 +0000 (18:25 -0700)]
altos/telefire: Make sure armed alarm goes off on time

Instead of turning the alarm off when a packet is received after the
deadline, just do it in the thread which is awake all of the time.

This prevents the alarm from sticking on when the LCO box is turned
off while the arming key is on.

Signed-off-by: Keith Packard <keithp@keithp.com>

23 months agoaltos: Re-enable the ms5607 and mma655x acquisition threads
Keith Packard [Wed, 3 Oct 2012 17:43:28 +0000 (10:43 -0700)]
altos: Re-enable the ms5607 and mma655x acquisition threads

These were disabled to help with testing in Argonia

Signed-off-by: Keith Packard <keithp@keithp.com>

23 months agoaltos: Provide MS5611 configuration option, HAS_MS5611
Keith Packard [Sat, 29 Sep 2012 05:39:55 +0000 (22:39 -0700)]
altos: Provide MS5611 configuration option, HAS_MS5611

MS5611 and MS5607 use slightly different conversion functions. Alas,
there doesn't appear to be a way to tell them apart in software. This
patch adds the necessary conversion changes and makes them depend on a
compile-time configuration option.

Signed-off-by: Keith Packard <keithp@keithp.com>

23 months agoaltos: Shrink Pa to altitude table
Keith Packard [Fri, 21 Sep 2012 11:29:17 +0000 (13:29 +0200)]
altos: Shrink Pa to altitude table

This improves the computation of the table enough that errors from a
470 entry table are almost all < 0.5m.

Signed-off-by: Keith Packard <keithp@keithp.com>

23 months agoBump revision to 1.2 development branch
Keith Packard [Thu, 20 Sep 2012 09:33:24 +0000 (11:33 +0200)]
Bump revision to 1.2 development branch

With 1.1 out the door, this now starts the 1.2 development series

Signed-off-by: Keith Packard <keithp@keithp.com>

23 months agoMerge remote-tracking branch 'mjb/altosdroid'
Keith Packard [Thu, 20 Sep 2012 09:30:19 +0000 (11:30 +0200)]
Merge remote-tracking branch 'mjb/altosdroid'

23 months agoMerge remote-tracking branch 'mjb/prefs_interface'
Keith Packard [Thu, 20 Sep 2012 09:30:11 +0000 (11:30 +0200)]
Merge remote-tracking branch 'mjb/prefs_interface'

23 months agoMerge remote-tracking branch 'mjb/altosui_mjb'
Keith Packard [Thu, 20 Sep 2012 09:29:55 +0000 (11:29 +0200)]
Merge remote-tracking branch 'mjb/altosui_mjb'

2 years agoaltosdroid: initial implementation of telemetry logging.
Mike Beattie [Tue, 18 Sep 2012 11:47:50 +0000 (23:47 +1200)]
altosdroid: initial implementation of telemetry logging.

Signed-off-by: Mike Beattie <mike@ethernal.org>

2 years agoaltoslib: make parts of AltosLog public for usage outside altoslib.
Mike Beattie [Tue, 18 Sep 2012 11:47:06 +0000 (23:47 +1200)]
altoslib: make parts of AltosLog public for usage outside altoslib.

Signed-off-by: Mike Beattie <mike@ethernal.org>

2 years agoaltos{lib,ui,droid}: move OS specific code out of altoslib
Mike Beattie [Tue, 18 Sep 2012 11:46:17 +0000 (23:46 +1200)]
altos{lib,ui,droid}: move OS specific code out of altoslib

This is to allow the usage of AltosLog on Android - no swing, so
we need to push the "home directory" code used to pick a default
telemetry logging path - using the PreferencesBackend interface
for now.

Signed-off-by: Mike Beattie <mike@ethernal.org>

2 years agoaltosdroid: cosmetic re-order of methods
Mike Beattie [Tue, 18 Sep 2012 11:43:18 +0000 (23:43 +1200)]
altosdroid: cosmetic re-order of methods

Signed-off-by: Mike Beattie <mike@ethernal.org>

2 years agoaltosdroid: simplify keys() method
Mike Beattie [Tue, 18 Sep 2012 11:42:11 +0000 (23:42 +1200)]
altosdroid: simplify keys() method

Signed-off-by: Mike Beattie <mike@ethernal.org>

2 years agoaltosdroid: Update Makefile.am
Mike Beattie [Tue, 18 Sep 2012 11:38:12 +0000 (23:38 +1200)]
altosdroid: Update Makefile.am

Signed-off-by: Mike Beattie <mike@ethernal.org>

2 years agofurther refinment of Releasing document
Bdale Garbee [Sun, 16 Sep 2012 21:12:26 +0000 (15:12 -0600)]
further refinment of Releasing document

2 years agoreleasing 1.1.1 1.1.1
Bdale Garbee [Sun, 16 Sep 2012 19:59:21 +0000 (13:59 -0600)]
releasing 1.1.1

2 years agoAdd release notes for version 1.1.1
Keith Packard [Sun, 16 Sep 2012 19:38:33 +0000 (12:38 -0700)]
Add release notes for version 1.1.1

Signed-off-by: Keith Packard <keithp@keithp.com>

2 years agoaltosdroid: implement AltosPreferencesBackend, and initialize.
Mike Beattie [Sun, 16 Sep 2012 13:29:33 +0000 (01:29 +1200)]
altosdroid: implement AltosPreferencesBackend, and initialize.

Signed-off-by: Mike Beattie <mike@ethernal.org>

2 years agoMerge branch 'prefs_interface' into altosdroid
Mike Beattie [Sun, 16 Sep 2012 10:27:04 +0000 (22:27 +1200)]
Merge branch 'prefs_interface' into altosdroid

2 years agoaltos: Fix telemini sdcdb init file
Keith Packard [Sun, 16 Sep 2012 09:39:25 +0000 (02:39 -0700)]
altos: Fix telemini sdcdb init file

Set the driver source path for the debugger

Signed-off-by: Keith Packard <keithp@keithp.com>

2 years agoaltosui: Gather Tm sensor data in Monitor Idle mode
Keith Packard [Sun, 16 Sep 2012 07:58:20 +0000 (00:58 -0700)]
altosui: Gather Tm sensor data in Monitor Idle mode

Tm is pretty much the same as TM for the analog sensors, it's just
missing the accelerometr. Use the same code for constructing an
AltosRecord for it

Signed-off-by: Keith Packard <keithp@keithp.com>

2 years agoaltos: Need to use 16-bit counts for ao_xmem functions
Keith Packard [Fri, 14 Sep 2012 23:56:04 +0000 (16:56 -0700)]
altos: Need to use 16-bit counts for ao_xmem functions

Trying to use 8-bit counts is a nice optimization which fails when the
count is larger than 255, as is the case with clearing the flash block
in the AT45 driver. This bug resulted in the inability to erase
flights on TeleMetrum v1.0 boards.

Signed-off-by: Keith Packard <keithp@keithp.com>

2 years agoaltosui: Show over-ground-distance in Descent tab
Keith Packard [Fri, 14 Sep 2012 19:59:31 +0000 (12:59 -0700)]
altosui: Show over-ground-distance in Descent tab

Helps to know where the rocket might land.

Signed-off-by: Keith Packard <keithp@keithp.com>

2 years agoaltosui: Remove debugging from KML export
Keith Packard [Fri, 14 Sep 2012 19:58:54 +0000 (12:58 -0700)]
altosui: Remove debugging from KML export

Left in from testing the Eeprom export bug

Signed-off-by: Keith Packard <keithp@keithp.com>

2 years agoaltosui: Fix Landed tab units
Keith Packard [Fri, 14 Sep 2012 18:13:02 +0000 (11:13 -0700)]
altosui: Fix Landed tab units

And clean up the whole flight value reporting code base. It would be
nice to create a separate class to make this easier; at present
there's a bunch of customization embedded in how values are presented
in each tab.

Reported by: Bdale Garbee <bdale@gag.com>
Signed-off-by: Keith Packard <keithp@keithp.com>

2 years agoaltoslib: Update GPS seen_values in AltosEepromIterable
Keith Packard [Fri, 14 Sep 2012 18:08:57 +0000 (11:08 -0700)]
altoslib: Update GPS seen_values in AltosEepromIterable

Otherwise, KML export won't ever get GPS data to write.

Reported by: Bob Brown <prefect@kloudbusters.org>
Signed-off-by: Keith Packard <keithp@keithp.com>

2 years agoaltoslib: Remove duplicate seen_ values in AltosEepromIterable
Keith Packard [Fri, 14 Sep 2012 18:08:19 +0000 (11:08 -0700)]
altoslib: Remove duplicate seen_ values in AltosEepromIterable

These are defined in AltosRecord; duplicating them is not a good plan

Signed-off-by: Keith Packard <keithp@keithp.com>

2 years agoaltosui: remove un-used import
Mike Beattie [Fri, 14 Sep 2012 00:43:21 +0000 (12:43 +1200)]
altosui: remove un-used import

Signed-off-by: Mike Beattie <mike@ethernal.org>

2 years agoaltosui: revert AltosUIPreferences init() method
Mike Beattie [Thu, 13 Sep 2012 13:27:22 +0000 (01:27 +1200)]
altosui: revert AltosUIPreferences init() method

Signed-off-by: Mike Beattie <mike@ethernal.org>

2 years agoaltosui: Add return to try/catch.. duh
Mike Beattie [Thu, 13 Sep 2012 13:08:53 +0000 (01:08 +1200)]
altosui: Add return to try/catch.. duh

Signed-off-by: Mike Beattie <mike@ethernal.org>

2 years agoaltosui: add missing try/catch
Mike Beattie [Thu, 13 Sep 2012 13:06:59 +0000 (01:06 +1200)]
altosui: add missing try/catch

Signed-off-by: Mike Beattie <mike@ethernal.org>

2 years agoaltosui/altoslib: bug fixes, update Makefile.am
Mike Beattie [Thu, 13 Sep 2012 13:03:53 +0000 (01:03 +1200)]
altosui/altoslib: bug fixes, update Makefile.am

Signed-off-by: Mike Beattie <mike@ethernal.org>

2 years agoaltosui/altoslib: Add call to …Preferences.init() with backend object, remove static...
Mike Beattie [Thu, 13 Sep 2012 12:53:56 +0000 (00:53 +1200)]
altosui/altoslib: Add call to …Preferences.init() with backend object, remove static init()

Signed-off-by: Mike Beattie <mike@ethernal.org>

2 years agoaltoslib: Add AltosPreferencesBackend.java to Makefile.am
Mike Beattie [Thu, 13 Sep 2012 12:46:34 +0000 (00:46 +1200)]
altoslib: Add AltosPreferencesBackend.java to Makefile.am

Signed-off-by: Mike Beattie <mike@ethernal.org>

2 years agoaltosui/altoslib: add methods to interface, fix imports/exceptions in BT code
Mike Beattie [Thu, 13 Sep 2012 12:44:59 +0000 (00:44 +1200)]
altosui/altoslib: add methods to interface, fix imports/exceptions in BT code

Signed-off-by: Mike Beattie <mike@ethernal.org>

2 years agoaltosui: add missing methods for Backend, fix BT code.
Mike Beattie [Thu, 13 Sep 2012 12:40:16 +0000 (00:40 +1200)]
altosui: add missing methods for Backend, fix BT code.

Signed-off-by: Mike Beattie <mike@ethernal.org>

2 years agoaltoslib/altosui: begin moving preferences "backend" into interface
Mike Beattie [Thu, 13 Sep 2012 12:25:49 +0000 (00:25 +1200)]
altoslib/altosui: begin moving preferences "backend" into interface

Signed-off-by: Mike Beattie <mike@ethernal.org>

2 years agoaltosui: comment out obsolete code - could probably remove the file.
Mike Beattie [Fri, 14 Sep 2012 01:17:24 +0000 (13:17 +1200)]
altosui: comment out obsolete code - could probably remove the file.

Signed-off-by: Mike Beattie <mike@ethernal.org>

2 years agoaltosui: add type to … implements Comparable.
Mike Beattie [Fri, 14 Sep 2012 01:16:48 +0000 (13:16 +1200)]
altosui: add type to … implements Comparable.

Signed-off-by: Mike Beattie <mike@ethernal.org>

2 years agoaltosui: comment out/remove dead code
Mike Beattie [Fri, 14 Sep 2012 01:16:16 +0000 (13:16 +1200)]
altosui: comment out/remove dead code

Signed-off-by: Mike Beattie <mike@ethernal.org>

2 years agoaltosui: access class variables by class, not instance
Mike Beattie [Fri, 14 Sep 2012 01:15:36 +0000 (13:15 +1200)]
altosui: access class variables by class, not instance

Signed-off-by: Mike Beattie <mike@ethernal.org>

2 years agoaltosui: remove redundant catches
Mike Beattie [Fri, 14 Sep 2012 01:15:07 +0000 (13:15 +1200)]
altosui: remove redundant catches

Signed-off-by: Mike Beattie <mike@ethernal.org>

2 years agoaltosui: comment out un-used classes and associated imports
Mike Beattie [Fri, 14 Sep 2012 01:14:31 +0000 (13:14 +1200)]
altosui: comment out un-used classes and associated imports

Signed-off-by: Mike Beattie <mike@ethernal.org>

2 years agoaltosui: comment out un-used fields and methods
Mike Beattie [Fri, 14 Sep 2012 01:13:35 +0000 (13:13 +1200)]
altosui: comment out un-used fields and methods

Signed-off-by: Mike Beattie <mike@ethernal.org>

2 years agoaltosui: remove un-used imports
Mike Beattie [Fri, 14 Sep 2012 01:09:58 +0000 (13:09 +1200)]
altosui: remove un-used imports

Signed-off-by: Mike Beattie <mike@ethernal.org>

2 years agoadd note about checking doc copyright date and revision history to Releasing
Bdale Garbee [Thu, 13 Sep 2012 22:13:42 +0000 (16:13 -0600)]
add note about checking doc copyright date and revision history to Releasing

2 years agodoc: Add revision history for 1.1. Update copyright date
Keith Packard [Thu, 13 Sep 2012 22:12:33 +0000 (15:12 -0700)]
doc: Add revision history for 1.1. Update copyright date

Signed-off-by: Keith Packard <keithp@keithp.com>

2 years agoMerge branch 'master' of ssh://git.gag.com/scm/git/fw/altos 1.1
Bdale Garbee [Thu, 13 Sep 2012 21:36:37 +0000 (15:36 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos

2 years agodoc: Document imperial units and groundstation configuration
Keith Packard [Thu, 13 Sep 2012 07:35:27 +0000 (00:35 -0700)]
doc: Document imperial units and groundstation configuration

What it says on the tin.

Signed-off-by: Keith Packard <keithp@keithp.com>

2 years agoMerge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Bdale Garbee [Thu, 13 Sep 2012 06:58:30 +0000 (00:58 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos

2 years agoaltosui: Exit with an error status when file processing fails
Keith Packard [Thu, 13 Sep 2012 06:56:18 +0000 (23:56 -0700)]
altosui: Exit with an error status when file processing fails

If the user provides any files on the command line, and if processing
them fails in some way, exit immediately with an error indication.

Signed-off-by: Keith Packard <keithp@keithp.com>

2 years agoaltosui: Leave new_gps indication until gps value is used
Keith Packard [Thu, 13 Sep 2012 05:40:57 +0000 (22:40 -0700)]
altosui: Leave new_gps indication until gps value is used

During replay, AltosState may not see a new GPS value as soon as it
lands in the state field as additional records with the same timestamp
may come in after the GPS record.

Instead of resetting the new_gps indication when the new record is
created, wait until the new_gps indication is seen by the AltosState
update code and have that clear the new_gps indication.

Signed-off-by: Keith Packard <keithp@keithp.com>

2 years agoaltosui: Stop downloading eeprom data on a block full of invalid data
Keith Packard [Thu, 13 Sep 2012 04:32:25 +0000 (21:32 -0700)]
altosui: Stop downloading eeprom data on a block full of invalid data

When no valid records are found within an eeprom block, we assume that
no more data will be found within the entire storage area.

Signed-off-by: Keith Packard <keithp@keithp.com>

2 years agodocument workaround for 'make fat' not building altoslib
Bdale Garbee [Thu, 13 Sep 2012 03:50:25 +0000 (21:50 -0600)]
document workaround for 'make fat' not building altoslib

2 years agoupdate Releasing for non-native versioning and builds on debian branch
Bdale Garbee [Thu, 13 Sep 2012 01:50:07 +0000 (19:50 -0600)]
update Releasing for non-native versioning and builds on debian branch

2 years agoMerge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Bdale Garbee [Thu, 13 Sep 2012 01:49:51 +0000 (19:49 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos

2 years agoaltosui: Serialize data access in TD config code
Keith Packard [Wed, 12 Sep 2012 23:07:41 +0000 (16:07 -0700)]
altosui: Serialize data access in TD config code

Setting the values was being done in the UI thread instead of the
Serial thread, which left the serial thread with uninitialized values
when it went to update the displayed value for the current
frequency. All fixed now.

Signed-off-by: Keith Packard <keithp@keithp.com>

2 years agoaltosui: Lock access to preferences data
Keith Packard [Wed, 12 Sep 2012 23:06:59 +0000 (16:06 -0700)]
altosui: Lock access to preferences data

These are accessed by several different threads, so keep things sane
by just holding locks across all access.

Signed-off-by: Keith Packard <keithp@keithp.com>

2 years agoaltosui: Add multi-sized icons to all windows
Keith Packard [Wed, 12 Sep 2012 20:07:01 +0000 (13:07 -0700)]
altosui: Add multi-sized icons to all windows

This lets the window system pick a better size for presentation

Signed-off-by: Keith Packard <keithp@keithp.com>

2 years agoReference specific dependent jars in the AltosUI launchers
Tom Marble [Wed, 12 Sep 2012 15:05:42 +0000 (10:05 -0500)]
Reference specific dependent jars in the AltosUI launchers

2 years agodoc: Mention changes to flight data download UI
Keith Packard [Wed, 12 Sep 2012 09:30:59 +0000 (02:30 -0700)]
doc: Mention changes to flight data download UI

Signed-off-by: Keith Packard <keithp@keithp.com>

2 years agoaltosui: Initialize flight velocity to zero when reading eeprom files
Keith Packard [Wed, 12 Sep 2012 09:26:32 +0000 (02:26 -0700)]
altosui: Initialize flight velocity to zero when reading eeprom files

Otherwise, the integration of velocity will start at MISSING and get
stranger. Fortunately, we know the initial velocity of the rocket when
sitting on the pad.

Signed-off-by: Keith Packard <keithp@keithp.com>

2 years agoaltosui: Don't say a decimal point for distances in meters
Keith Packard [Wed, 12 Sep 2012 06:37:20 +0000 (23:37 -0700)]
altosui: Don't say a decimal point for distances in meters

Useful for distances in miles, but not meters.

Signed-off-by: Keith Packard <keithp@keithp.com>

2 years agoaltosui: Initialize imperial units checkbox with correct value
Keith Packard [Wed, 12 Sep 2012 06:36:26 +0000 (23:36 -0700)]
altosui: Initialize imperial units checkbox with correct value

Use imperial units preference instead of serial debug preference. Cut
& paste programming failure...

Signed-off-by: Keith Packard <keithp@keithp.com>

2 years agoMerge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Bdale Garbee [Wed, 12 Sep 2012 06:26:21 +0000 (00:26 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos

2 years agoClean up Windows event handles on com port close
Keith Packard [Wed, 12 Sep 2012 06:04:19 +0000 (23:04 -0700)]
Clean up Windows event handles on com port close

This avoids having to wait for the receiver to timeout before we can
open the same com port again.

This patch also adds a bit more debugging -- it prints Windows error
messages to stdout along with the file/line where the error was generated.

Signed-off-by: Keith Packard <keithp@keithp.com>

2 years agoInclude AltosLib.jar in windows install
Keith Packard [Wed, 12 Sep 2012 05:03:17 +0000 (22:03 -0700)]
Include AltosLib.jar in windows install

Otherwise, altosui doesn't do much.

Signed-off-by: Keith Packard <keithp@keithp.com>

2 years agoreleasing 1.1
Bdale Garbee [Wed, 12 Sep 2012 04:17:22 +0000 (22:17 -0600)]
releasing 1.1

2 years agoMerge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Tom Marble [Wed, 12 Sep 2012 03:50:18 +0000 (22:50 -0500)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos

2 years agoAdded the feature to AC to default --with-android to $ANDROID_SDK (if set)
Tom Marble [Wed, 12 Sep 2012 03:48:04 +0000 (22:48 -0500)]
Added the feature to AC to default --with-android to $ANDROID_SDK (if set)
Fixed typos in altosui/Makefile.am (had removed JCOMMON, but it's from AC)
Jenkins changes:
- added android sdk
- will now record artifacts: altoslib/AltosLib.jar,altosui/altosui.jar,**/*.apk

2 years agoUse ft/s for imperial speeds
Keith Packard [Tue, 11 Sep 2012 22:53:36 +0000 (15:53 -0700)]
Use ft/s for imperial speeds

Bob Brown thinks this unit will be more useful than mph

Signed-off-by: Keith Packard <keithp@keithp.com>

2 years agoAdd Version 1.1 release notes.
Keith Packard [Tue, 11 Sep 2012 22:30:45 +0000 (15:30 -0700)]
Add Version 1.1 release notes.

Signed-off-by: Keith Packard <keithp@keithp.com>

2 years agoaltosui: Imperial units for graphs too
Keith Packard [Tue, 11 Sep 2012 08:00:05 +0000 (01:00 -0700)]
altosui: Imperial units for graphs too

Just to be consistent

Signed-off-by: Keith Packard <keithp@keithp.com>