fw/altos
8 weeks agoaltos: Add EasyMega v2.0 to default build
Keith Packard [Fri, 19 Oct 2018 15:41:51 +0000 (08:41 -0700)]
altos: Add EasyMega v2.0 to default build

Signed-off-by: Keith Packard <keithp@keithp.com>
8 weeks agoaltos/easymega-v2.0: Add adxl375, replace mpu6000 with 9250 [v2]
Keith Packard [Sat, 13 Oct 2018 16:43:25 +0000 (09:43 -0700)]
altos/easymega-v2.0: Add adxl375, replace mpu6000 with 9250 [v2]

Should reflect current hardware design now.

v2:
Use SPI mode 3 for ADXL375
Invert ADXL375 values

Signed-off-by: Keith Packard <keithp@keithp.com>
8 weeks agoaltos/easymega-v2.0: Change binary to easymega-v2.0 instead of easymega-v1.0
Keith Packard [Sat, 13 Oct 2018 16:46:01 +0000 (09:46 -0700)]
altos/easymega-v2.0: Change binary to easymega-v2.0 instead of easymega-v1.0

Signed-off-by: Keith Packard <keithp@keithp.com>
8 weeks agoaltos: Add ADXL375 driver [v2]
Keith Packard [Sat, 13 Oct 2018 16:41:31 +0000 (09:41 -0700)]
altos: Add ADXL375 driver [v2]

Includes self-test code and multi-byte mode operation for reading
sample registers.

Signed-off-by: Keith Packard <keithp@keithp.com>
8 weeks agoaltos/stm: Support SPI modes other than 0
Keith Packard [Mon, 15 Oct 2018 18:15:31 +0000 (11:15 -0700)]
altos/stm: Support SPI modes other than 0

ADXL375 requires SPI mode 3.

Signed-off-by: Keith Packard <keithp@keithp.com>
8 weeks agoaltos/stm: Make beeper driver support all possible tim234 configs
Keith Packard [Sat, 13 Oct 2018 20:42:34 +0000 (13:42 -0700)]
altos/stm: Make beeper driver support all possible tim234 configs

And update all users to be explicit about the desired config.

Signed-off-by: Keith Packard <keithp@keithp.com>
8 weeks agoaltos: Create ao_data_fill shared function
Keith Packard [Fri, 19 Oct 2018 15:12:22 +0000 (08:12 -0700)]
altos: Create ao_data_fill shared function

This fills a data ring entry with all of the current sensor values
other than the ADC. It is used in all of the adc completion functions.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos: remove usbtrng support (chaoskey prototypes)
Bdale Garbee [Sat, 13 Oct 2018 16:17:47 +0000 (10:17 -0600)]
altos: remove usbtrng support (chaoskey prototypes)

2 months agoaltos: remove telescience support
Bdale Garbee [Sat, 13 Oct 2018 16:12:39 +0000 (10:12 -0600)]
altos: remove telescience support

2 months agoaltos: remove teledongle-v1.8 support (what was that, anyway?!?)
Bdale Garbee [Sat, 13 Oct 2018 16:02:13 +0000 (10:02 -0600)]
altos: remove teledongle-v1.8 support (what was that, anyway?!?)

2 months agoaltos: remove megadongle-v0.1 support, never went beyond prototype
Bdale Garbee [Sat, 13 Oct 2018 15:59:22 +0000 (09:59 -0600)]
altos: remove megadongle-v0.1 support, never went beyond prototype

2 months agoaltos: remove telepyro-v0.1 support, which was never completed anyway
Bdale Garbee [Sat, 13 Oct 2018 15:57:44 +0000 (09:57 -0600)]
altos: remove telepyro-v0.1 support, which was never completed anyway

2 months agoaltos: remove teleterra-v0.1, also an ancient cc1111 project
Bdale Garbee [Sat, 13 Oct 2018 15:55:03 +0000 (09:55 -0600)]
altos: remove teleterra-v0.1, also an ancient cc1111 project

2 months agoaltos/drivers: Use stdbool in ao_ms5607.c
Keith Packard [Sat, 13 Oct 2018 15:33:49 +0000 (08:33 -0700)]
altos/drivers: Use stdbool in ao_ms5607.c

We don't have TRUE and FALSE anymore (they were pdclib specific).

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos: Remove pdclib bits from Makefile
Keith Packard [Sat, 13 Oct 2018 15:27:41 +0000 (08:27 -0700)]
altos: Remove pdclib bits from Makefile

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoRemove .gitmodules
Keith Packard [Sat, 13 Oct 2018 15:27:17 +0000 (08:27 -0700)]
Remove .gitmodules

We no longer use submodules (yay!)

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoBump version to 1.8.7.1
Keith Packard [Sat, 13 Oct 2018 15:26:02 +0000 (08:26 -0700)]
Bump version to 1.8.7.1

Tag development versions

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos/stm32f4-disco: Start hooking up stm32f413 USB for the disco board
Keith Packard [Tue, 2 Oct 2018 19:48:25 +0000 (12:48 -0700)]
altos/stm32f4-disco: Start hooking up stm32f413 USB for the disco board

Non-working as yet.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos/stm32f4: Add start of stm32f413 USB support
Keith Packard [Tue, 2 Oct 2018 19:46:19 +0000 (12:46 -0700)]
altos/stm32f4: Add start of stm32f413 USB support

This code doesn't work yet.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos/stm32f4: Add stm32f413 USART support
Keith Packard [Tue, 2 Oct 2018 19:46:01 +0000 (12:46 -0700)]
altos/stm32f4: Add stm32f413 USART support

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos/stm32f4: Add external interrupt bits
Keith Packard [Tue, 2 Oct 2018 19:45:39 +0000 (12:45 -0700)]
altos/stm32f4: Add external interrupt bits

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos/stm32f4: Add more stm32f413 definitions and support code
Keith Packard [Tue, 2 Oct 2018 19:44:58 +0000 (12:44 -0700)]
altos/stm32f4: Add more stm32f413 definitions and support code

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos: Clean up AO_ROMCONFIG bits
Keith Packard [Wed, 12 Sep 2018 01:53:15 +0000 (18:53 -0700)]
altos: Clean up AO_ROMCONFIG bits

Remove address parameter (doesn't work with gcc), create shared
ao_romconfig in kernel.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos/stm32f4-disco: Hook up serial console. Add scheme
Keith Packard [Wed, 12 Sep 2018 01:51:59 +0000 (18:51 -0700)]
altos/stm32f4-disco: Hook up serial console. Add scheme

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos/stm32f4: Place ARM.exidx sections after .text
Keith Packard [Wed, 12 Sep 2018 01:50:45 +0000 (18:50 -0700)]
altos/stm32f4: Place ARM.exidx sections after .text

This makes the linker happy about not attempting to merge unordered
and ordered stuff (whatever that means...)

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos/stm32f4: Use full printf/scanf (including floats)
Keith Packard [Wed, 12 Sep 2018 01:50:15 +0000 (18:50 -0700)]
altos/stm32f4: Use full printf/scanf (including floats)

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos/stm32f4: Add usart driver for usart6
Keith Packard [Wed, 12 Sep 2018 01:49:22 +0000 (18:49 -0700)]
altos/stm32f4: Add usart driver for usart6

This is what the disco board hooks up.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos/stm32f4: Align stack to 8 bytes
Keith Packard [Wed, 12 Sep 2018 01:46:52 +0000 (18:46 -0700)]
altos/stm32f4: Align stack to 8 bytes

This makes sure that doubles are aligned properly when passed on the stack.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos/stm32f4-disco: Add .gitignore
Keith Packard [Tue, 11 Sep 2018 19:03:27 +0000 (12:03 -0700)]
altos/stm32f4-disco: Add .gitignore

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos: Add generic LED driver.
Keith Packard [Tue, 11 Sep 2018 18:57:50 +0000 (11:57 -0700)]
altos: Add generic LED driver.

This driver uses the generic GPIO functions and allows per-LED port
and pin configuration. It supports up to 32 LEDs.

Rename SoC-specific LED drivers.

Remove enabled parameter to ao_led_init

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos: Eliminate 'pin' field from GPIO functions
Keith Packard [Tue, 11 Sep 2018 17:40:24 +0000 (10:40 -0700)]
altos: Eliminate 'pin' field from GPIO functions

This was used with the 8051 bit-addressing mode to provide
single-instruction access to GPIO pins.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos/stm32f4: Fix clock configuration
Keith Packard [Tue, 11 Sep 2018 08:28:03 +0000 (01:28 -0700)]
altos/stm32f4: Fix clock configuration

Was running the PLL input too slow (it wants 2MHz).
Was configuring the PLL_P factor wrong (needs magic values, not P
value)

Set up clock debugging for PA8 and PC9 output. Enable on disco board
for debugging.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos/stm32f4: Add STM32F413 disco board support
Keith Packard [Tue, 11 Sep 2018 07:08:17 +0000 (00:08 -0700)]
altos/stm32f4: Add STM32F413 disco board support

Discovery development board

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos/stm32f4: Start adding support for STM32F413
Keith Packard [Tue, 11 Sep 2018 07:07:38 +0000 (00:07 -0700)]
altos/stm32f4: Start adding support for STM32F413

Enough to get clocks lit up at least.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos: Remove 8051-ism from ao_usb.h
Keith Packard [Tue, 2 Oct 2018 19:47:00 +0000 (12:47 -0700)]
altos: Remove 8051-ism from ao_usb.h

__at doesn't exist for non-8051

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos: Delete random 8051 ISR declarations
Keith Packard [Tue, 11 Sep 2018 07:05:38 +0000 (00:05 -0700)]
altos: Delete random 8051 ISR declarations

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos: Allow application-specific prompts for ao_cmd_readline
Keith Packard [Thu, 16 Aug 2018 05:44:17 +0000 (22:44 -0700)]
altos: Allow application-specific prompts for ao_cmd_readline

Lets other readline users specify alternate prompts.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos: Use stdbool true/false instead of TRUE/FALSE
Keith Packard [Thu, 16 Aug 2018 02:17:19 +0000 (19:17 -0700)]
altos: Use stdbool true/false instead of TRUE/FALSE

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos: Make cmd number parsing functions return value
Keith Packard [Thu, 16 Aug 2018 02:13:45 +0000 (19:13 -0700)]
altos: Make cmd number parsing functions return value

Don't use a global variable to hold the result.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos: Remove 8051 address space specifiers
Keith Packard [Thu, 16 Aug 2018 00:47:37 +0000 (17:47 -0700)]
altos: Remove 8051 address space specifiers

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos: Remove *_TO_DATA macros
Keith Packard [Thu, 16 Aug 2018 00:34:20 +0000 (17:34 -0700)]
altos: Remove *_TO_DATA macros

Now that we don't support 8051, we don't need these

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoRemove pdclib
Keith Packard [Wed, 15 Aug 2018 22:39:34 +0000 (15:39 -0700)]
Remove pdclib

2 months agoaltos: Switch to newlib-nano for libc on arm
Keith Packard [Sun, 5 Aug 2018 04:23:22 +0000 (12:23 +0800)]
altos: Switch to newlib-nano for libc on arm

Stop using pdclib

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos: Remove cc1111 products
Keith Packard [Sun, 5 Aug 2018 04:17:19 +0000 (12:17 +0800)]
altos: Remove cc1111 products

We're not testing these anyways; building new firmware for them is not helpful.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos: use %lu for APRS altitude in sprintf
Keith Packard [Tue, 11 Sep 2018 07:06:44 +0000 (00:06 -0700)]
altos: use %lu for APRS altitude in sprintf

It's a long.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos/stm: Make flash loader work with either 8MHz or 16MHz xtal
Keith Packard [Sat, 13 Oct 2018 14:50:59 +0000 (07:50 -0700)]
altos/stm: Make flash loader work with either 8MHz or 16MHz xtal

Provide PLL definitions for both values.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltosdroid: Bump version to 18 for 1.8.7
Keith Packard [Sat, 13 Oct 2018 14:44:10 +0000 (07:44 -0700)]
altosdroid: Bump version to 18 for 1.8.7

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos: first cut at easymega v2.0 support .. nothing working yet
Bdale Garbee [Sat, 13 Oct 2018 05:32:57 +0000 (23:32 -0600)]
altos: first cut at easymega v2.0 support .. nothing working yet

2 months agodoc: add bootloader force instructions for TeleBT v4.0
Bdale Garbee [Thu, 11 Oct 2018 02:41:40 +0000 (20:41 -0600)]
doc: add bootloader force instructions for TeleBT v4.0

2 months agoupdate turnon_telebt to use new approach for saving cal value on TeleBT
Bdale Garbee [Tue, 9 Oct 2018 17:46:09 +0000 (11:46 -0600)]
update turnon_telebt to use new approach for saving cal value on TeleBT

2 months agocapture changes to Releasing discovered during 1.8.7 release
Bdale Garbee [Tue, 9 Oct 2018 03:41:30 +0000 (21:41 -0600)]
capture changes to Releasing discovered during 1.8.7 release

2 months agoaltos/lpc: Make sure USB pull-up is held low at boot for 'a while'
Keith Packard [Tue, 9 Oct 2018 02:42:09 +0000 (19:42 -0700)]
altos/lpc: Make sure USB pull-up is held low at boot for 'a while'

Add a delay loop to make sure the host sees the pull-up low for long
enough.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoao-bringup: Use new ao-cal-freq options when flashing teledongle v3.0
Keith Packard [Tue, 9 Oct 2018 02:40:32 +0000 (19:40 -0700)]
ao-bringup: Use new ao-cal-freq options when flashing teledongle v3.0

Use --nosave and --output to get the value needed to reflash the device.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agodoc: correct specs for TeleMega v3.0, which still uses the MMA6555
Bdale Garbee [Mon, 8 Oct 2018 22:27:33 +0000 (16:27 -0600)]
doc: correct specs for TeleMega v3.0, which still uses the MMA6555

2 months agoMerge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Bdale Garbee [Mon, 8 Oct 2018 22:07:32 +0000 (16:07 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos

2 months agoadd new script that uses openocd to reset an LPC target
Bdale Garbee [Mon, 8 Oct 2018 22:06:29 +0000 (16:06 -0600)]
add new script that uses openocd to reset an LPC target

2 months agoSet version to 1.8.7
Keith Packard [Mon, 8 Oct 2018 06:31:53 +0000 (23:31 -0700)]
Set version to 1.8.7

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agodoc: Note fixes for Mac OS X
Keith Packard [Mon, 8 Oct 2018 06:31:04 +0000 (23:31 -0700)]
doc: Note fixes for Mac OS X

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoSwitch to universal JavaApplicationStub for Mac OS X
Keith Packard [Mon, 8 Oct 2018 06:25:25 +0000 (23:25 -0700)]
Switch to universal JavaApplicationStub for Mac OS X

The binary JavaApplicationStub only supports Mac JRE 6, even if you
install a later JRE from Oracle it will still run our apps with the
Mac version.

This replacement JavaApplicationStub is a shell script which comes
from here:

https://github.com/tofi86/universalJavaApplicationStub

I've tested it with Oracle JRE 10 installed and AltosUI came up fine,
and has access to our devices and networking.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos-mapd: Add --max-zoom to limit tile loading. Set default to 15.
Keith Packard [Sun, 7 Oct 2018 22:28:32 +0000 (16:28 -0600)]
altos-mapd: Add --max-zoom to limit tile loading. Set default to 15.

This ensures that we won't end up serving huge numbers of high
resolution images.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agodoc: Note that 1.8.7 fixes map images
Keith Packard [Sun, 7 Oct 2018 21:26:27 +0000 (14:26 -0700)]
doc: Note that 1.8.7 fixes map images

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltosuilib: Leave some map debug code around for the future
Keith Packard [Sun, 7 Oct 2018 21:11:03 +0000 (14:11 -0700)]
altosuilib: Leave some map debug code around for the future

Displays lat/lon on each map tile. Commented out for production use.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltoslib: Be less chatty about map loading
Keith Packard [Sun, 7 Oct 2018 21:06:51 +0000 (14:06 -0700)]
altoslib: Be less chatty about map loading

Only mention when a new tile is being fetched from the server.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltoslib: NumberFormat can't be shared between parsers
Keith Packard [Sun, 7 Oct 2018 20:49:48 +0000 (14:49 -0600)]
altoslib: NumberFormat can't be shared between parsers

AltosJson uses NumberFormat to ensure locale-independent parsing of
values. However, NumberFormat appears to have some internal state
which means that each thread needs to have an independent NumberFormat
object. Create one for each parser as needed.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltosui/altosdroid: Change message in forbidden map tiles
Keith Packard [Sun, 7 Oct 2018 20:12:56 +0000 (13:12 -0700)]
altosui/altosdroid: Change message in forbidden map tiles

These are outside of *known* launch areas.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos-mapd: Check nearest portion of tile to launch site
Keith Packard [Sun, 7 Oct 2018 20:08:30 +0000 (14:08 -0600)]
altos-mapd: Check nearest portion of tile to launch site

We limit tile queries to those within 17km of a known launch
site. Change the check to look at the portion of the tile nearest each
launch site, instead of only checking the center location of the tile.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos-map: Switch from json FD ops to json FILE ops
Keith Packard [Sun, 7 Oct 2018 17:32:48 +0000 (10:32 -0700)]
altos-map: Switch from json FD ops to json FILE ops

Older versions (in Debian stable) do not have the fd-based operations.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos-mapd: Handle clients failing to send valid JSON
Keith Packard [Sun, 7 Oct 2018 17:03:31 +0000 (10:03 -0700)]
altos-mapd: Handle clients failing to send valid JSON

Just bail if the data we receive doesn't generate a json value.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltosuilib: InputEvent.getModifiers is deprecated, use getModifiersEx
Keith Packard [Sun, 7 Oct 2018 17:02:26 +0000 (10:02 -0700)]
altosuilib: InputEvent.getModifiers is deprecated, use getModifiersEx

Some java change; seems like it's a no-op for us.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltosui/altosdroid: Disable offline map type selections
Keith Packard [Sun, 7 Oct 2018 17:01:30 +0000 (10:01 -0700)]
altosui/altosdroid: Disable offline map type selections

Our server only supports hybrid maps for now. If that changes, we can
re-add this support easily enough.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltosuilib: Remove GrabNDrag.java
Keith Packard [Sun, 7 Oct 2018 16:39:27 +0000 (09:39 -0700)]
altosuilib: Remove GrabNDrag.java

This isn't used anymore.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agomap-server: Implement altos-map in C
Keith Packard [Sun, 7 Oct 2018 16:22:44 +0000 (09:22 -0700)]
map-server: Implement altos-map in C

This app is all about startup time, and java starts
slowly. Re-implement in C to improve server performance.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltosdroid: Restore google maps key setting
Keith Packard [Sun, 7 Oct 2018 06:32:24 +0000 (23:32 -0700)]
altosdroid: Restore google maps key setting

Only for altosdroid, and use a key restricted to our app

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltosdroid: Set offline map scale to 1
Keith Packard [Sun, 7 Oct 2018 06:25:50 +0000 (23:25 -0700)]
altosdroid: Set offline map scale to 1

Offline maps only supports scale 1 now.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos-mapd: Install systemd service file and defaults file
Keith Packard [Sun, 7 Oct 2018 05:22:26 +0000 (23:22 -0600)]
altos-mapd: Install systemd service file and defaults file

This lets the map service 'just work' if enabled.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos-map: Support version query from application
Keith Packard [Sun, 7 Oct 2018 04:32:12 +0000 (21:32 -0700)]
altos-map: Support version query from application

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltosuilib: Fix offline map messages to match new meanings
Keith Packard [Sun, 7 Oct 2018 04:30:03 +0000 (21:30 -0700)]
altosuilib: Fix offline map messages to match new meanings

forbidden means outside of launch area.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltoslib: Retry map connections 10 times on network failure
Keith Packard [Sun, 7 Oct 2018 04:30:58 +0000 (21:30 -0700)]
altoslib: Retry map connections 10 times on network failure

This covers a host of problems between the application and google maps.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltosdroid: Fix offline map messages to match new meanings
Keith Packard [Sun, 7 Oct 2018 04:30:03 +0000 (21:30 -0700)]
altosdroid: Fix offline map messages to match new meanings

forbidden means outside of launch area.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltoslib: Change map loading to lat=&lon= from center=
Keith Packard [Sun, 7 Oct 2018 03:21:07 +0000 (20:21 -0700)]
altoslib: Change map loading to lat=&lon= from center=

This is easier to parse.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltoslib: Use https for launch-sites.txt
Keith Packard [Sun, 7 Oct 2018 03:20:33 +0000 (20:20 -0700)]
altoslib: Use https for launch-sites.txt

http causes a redirect, which Java doesn't handle

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos-mapd: Install altosmapd.jar file
Keith Packard [Sun, 7 Oct 2018 04:28:36 +0000 (22:28 -0600)]
altos-mapd: Install altosmapd.jar file

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos-mapd: Make cache service listen queue longer
Keith Packard [Sun, 7 Oct 2018 04:27:58 +0000 (22:27 -0600)]
altos-mapd: Make cache service listen queue longer

Just in case the service gets busy, make the listen queue longer.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos-mapd: Clean up log messages
Keith Packard [Sun, 7 Oct 2018 04:27:20 +0000 (22:27 -0600)]
altos-mapd: Clean up log messages

Generate a single log message per request with remote address,
parameters and result code.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos-mapd: remove debug printf
Keith Packard [Sun, 7 Oct 2018 04:26:46 +0000 (22:26 -0600)]
altos-mapd: remove debug printf

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos-map: Retry connection to cache service
Keith Packard [Sun, 7 Oct 2018 04:25:48 +0000 (22:25 -0600)]
altos-map: Retry connection to cache service

Just in case the cache service gets busy, retry the connection instead
of immediately failing.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos-mapd: Add geo-fencing for map requests. Add port and key arguments
Keith Packard [Sun, 7 Oct 2018 02:33:51 +0000 (19:33 -0700)]
altos-mapd: Add geo-fencing for map requests. Add port and key arguments

Map requests are now limited to a region within 17km of any registered
launch site.

The --port argument allows the listen port to be changed.

The --key argument provides the name of a file containing the Google
maps API key.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltoslib: Switch to maps.altusmetrum.org when no google map key is available
Keith Packard [Sun, 7 Oct 2018 02:29:01 +0000 (19:29 -0700)]
altoslib: Switch to maps.altusmetrum.org when no google map key is available

The map key is only usable from maps.altusmetrum.org at this point,
and that service will be proxying for everyone in the near future.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltoslib: Allow launch site URL to be overridden at runtime
Keith Packard [Sun, 7 Oct 2018 02:27:43 +0000 (19:27 -0700)]
altoslib: Allow launch site URL to be overridden at runtime

Expose a public variable, AltosLaunchSites.launch_sites_url, that will
be used in place of the environment variable or pre-defined value.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoMerge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Bdale Garbee [Sun, 7 Oct 2018 00:55:05 +0000 (18:55 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos

2 months agoaltoslib: update launch-sites.txt location to new home at maps.altusmetrum.org
Bdale Garbee [Sun, 7 Oct 2018 00:54:35 +0000 (18:54 -0600)]
altoslib: update launch-sites.txt location to new home at maps.altusmetrum.org

2 months agodoc: Make use of 'faketime' configurable with configure.ac. Default to 'no'
Keith Packard [Sun, 7 Oct 2018 00:17:20 +0000 (17:17 -0700)]
doc: Make use of 'faketime' configurable with configure.ac. Default to 'no'

This ensures that older a2x versions don't simply wedge while building
the docs.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos-mapd: Use command line to pass map directory in
Keith Packard [Sun, 7 Oct 2018 00:11:48 +0000 (18:11 -0600)]
altos-mapd: Use command line to pass map directory in

Don't bother with a default value, just require a command line param.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos-map: Install .jar file for altos-map
Keith Packard [Sun, 7 Oct 2018 00:11:13 +0000 (18:11 -0600)]
altos-map: Install .jar file for altos-map

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoaltos-map: Fix altos-map HTTP syntax
Keith Packard [Sun, 7 Oct 2018 00:10:57 +0000 (18:10 -0600)]
altos-map: Fix altos-map HTTP syntax

Add blank line between header and content.
Make error pages have actual HTML content.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agomap-server: Add maps proxy server
Keith Packard [Sat, 6 Oct 2018 23:04:39 +0000 (16:04 -0700)]
map-server: Add maps proxy server

This creates a map proxy server to handle the new Google Maps API requirements

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agoAdd map-loading documentation
Keith Packard [Sat, 6 Oct 2018 19:00:45 +0000 (12:00 -0700)]
Add map-loading documentation

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agodoc: Use RELEASE_DATE to set PDF timestamps using faketime
Keith Packard [Sat, 6 Oct 2018 04:40:13 +0000 (21:40 -0700)]
doc: Use RELEASE_DATE to set PDF timestamps using faketime

This ensures that the generated PDF files do not depend on the time of
the build and only on the date of the release.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agomacosx: Ship install-macosx script with all apps.
Keith Packard [Sat, 6 Oct 2018 02:36:20 +0000 (19:36 -0700)]
macosx: Ship install-macosx script with all apps.

This script copies all files to ~/Applications/AltOS, then it deletes
all xattrs on all files so that OS X will run the java programs.

Signed-off-by: Keith Packard <keithp@keithp.com>
2 months agodoc: Add check for new hardware in specs.inc
Keith Packard [Sat, 6 Oct 2018 01:22:59 +0000 (18:22 -0700)]
doc: Add check for new hardware in specs.inc

Signed-off-by: Keith Packard <keithp@keithp.com>