From: Keith Packard <keithp@keithp.com>
Date: Sat, 27 Jan 2024 23:31:04 +0000 (-0800)
Subject: altos/telelco-v3.0: Configure SPI GPIO pins to 50MHz
X-Git-Tag: 1.9.18~2^2~36
X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=commitdiff_plain;h=ff21e293ee8185b19a30df74ca7a1610625ef465

altos/telelco-v3.0: Configure SPI GPIO pins to 50MHz

Need enough bandwidth to run at 20MHz

Signed-off-by: Keith Packard <keithp@keithp.com>
---

diff --git a/src/telelco-v3.0/ao_pins.h b/src/telelco-v3.0/ao_pins.h
index 08135542..be253232 100644
--- a/src/telelco-v3.0/ao_pins.h
+++ b/src/telelco-v3.0/ao_pins.h
@@ -75,7 +75,7 @@
 #define HAS_SPI_1		1	/* NHD-C12864LZ LCD Module */
 #define SPI_1_PA5_PA6_PA7	1
 #define SPI_1_PA6_DISABLE	1
-#define SPI_1_MODE_OUTPUT	STM_GPIO_CR_MODE_OUTPUT_10MHZ
+#define SPI_1_MODE_OUTPUT	STM_GPIO_CR_MODE_OUTPUT_50MHZ
 #define SPI_1_PB3_PB4_PB5	0
 #define SPI_1_PE13_PE14_PE15	0