From: Keith Packard <keithp@keithp.com>
Date: Tue, 10 May 2016 19:29:14 +0000 (-0700)
Subject: Add TeleMega to spec list. Add TeleGPS RF output.
X-Git-Tag: 1.6.4~1^2~56
X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=commitdiff_plain;h=6a6da23335e6e5864387c7a22946f80f51056a4f

Add TeleMega to spec list. Add TeleGPS RF output.

Signed-off-by: Keith Packard <keithp@keithp.com>
---

diff --git a/doc/specs.inc b/doc/specs.inc
index a6c7b69a..c335b081 100644
--- a/doc/specs.inc
+++ b/doc/specs.inc
@@ -79,6 +79,15 @@
 	|8MB
 	|40mW
 	|3.7V
+
+	|TeleMega v2.0
+	|MS5607 30km (100k')
+	|MMA6555 102g
+	|uBlox Max-7Q
+	|MPU6000 HMC5883
+	|8MB
+	|40mW
+	|3.7V
 	endif::telemega[]
 
 	ifdef::easymega[]
diff --git a/doc/telegps-specs.inc b/doc/telegps-specs.inc
index 6ff8c76f..417a9708 100644
--- a/doc/telegps-specs.inc
+++ b/doc/telegps-specs.inc
@@ -5,6 +5,11 @@
       
 		TeleGPS uses the u-Blox Max-7Q GPS receiver.
       
+	=== 70cm Transmitter
+
+		TeleGPS uses a TI CC115L transmitter. This radio
+		produces 10mW of RF output.
+
 	=== Micro-controller
       
 		TeleGPS uses an NXP LPC11U14 micro-controller. This