From: Keith Packard Date: Sun, 23 Aug 2020 17:55:30 +0000 (-0700) Subject: doc: Fix spelling error in updating-firmware section. X-Git-Tag: 1.9.5~1^2~16 X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=commitdiff_plain;h=335e40873c238a67cea2c63d62b73fd9d29e94d2 doc: Fix spelling error in updating-firmware section. Thanks to Timothy Dixon for catching this (copy-and-pasted many times) typo -- could sequentially -> count sequentially. Signed-off-by: Keith Packard --- diff --git a/doc/updating-firmware.inc b/doc/updating-firmware.inc index 1999a9c7..b9216a22 100644 --- a/doc/updating-firmware.inc +++ b/doc/updating-firmware.inc @@ -84,7 +84,7 @@ Connect pin 6 and pin 1 of the companion connector. Pin 1 can be identified by the square pad - around it, and then the pins could sequentially across + around it, and then the pins count sequentially across the board. Be very careful to *not* short pin 8 to anything as that is connected directly to the battery. Pin 7 carries 3.3V and the board will crash @@ -97,7 +97,7 @@ Connect pin 6 and pin 1 of the companion connector. Pin 1 can be identified by the square pad - around it, and then the pins could sequentially across + around it, and then the pins count sequentially across the board. Be very careful to *not* short pin 8 to anything as that is connected directly to the battery. Pin 7 carries 3.3V and the board will crash @@ -111,7 +111,7 @@ Connect pin 5 and pin 1 of the debug connector, which is the six holes next to the beeper. Pin 1 can be identified by the square pad around it, and then the - pins could sequentially across the board, making Pin 5 + pins count sequentially across the board, making Pin 5 the one on the other end of the row. endif::easytimer[] @@ -120,7 +120,7 @@ Connect pin 6 and pin 1 of the companion connector. Pin 1 can be identified by the square pad - around it, and then the pins could sequentially across + around it, and then the pins count sequentially across the board. Be very careful to *not* short pin 8 to anything as that is connected directly to the battery. Pin 7 carries 3.3V and the board will crash @@ -134,7 +134,7 @@ Connect pin 6 and pin 1 of the debug connector, which is the six holes next to the beeper. Pin 1 can be identified by the square pad around it, and then the - pins could sequentially across the board, making Pin 6 + pins count sequentially across the board, making Pin 6 the one on the other end of the row. endif::easymini[]