--- /dev/null
+#!/bin/sh
+
+if [ -x ../ao-tools/ao-load/ao-load ]; then
+ AOLOAD=../ao-tools/ao-load/ao-load
+elif [ -x /usr/bin/ao-load ]; then
+ AOLOAD=/usr/bin/ao-load
+else
+ echo "Can't find ao-load! Aborting."
+ exit 1
+fi
+
+if [ -x ../ao-tools/ao-rawload/ao-rawload ]; then
+ RAWLOAD=../ao-tools/ao-rawload/ao-rawload
+elif [ -x /usr/bin/ao-rawload ]; then
+ RAWLOAD=/usr/bin/ao-rawload
+else
+ echo "Can't find ao-rawload! Aborting."
+ exit 1
+fi
+
+echo "TeleBT v0.1 Turn-On and Calibration Program"
+echo "Copyright 2011 by Bdale Garbee. Released under GPL v2"
+echo
+echo "Expectations:"
+echo "\tTeleBT v0.1 powered from USB"
+echo "\t\twith TeleDonle (on /dev/ttyACM0) cabled to debug header"
+echo "\t\twith coax from SMA to frequency counter"
+echo
+echo -n "TeleBT serial number: "
+read SERIAL
+
+echo $RAWLOAD
+
+$RAWLOAD -D 100 -r ao_led_blink.ihx
+echo "LEDs should be blinking"
+sleep 5
+
+$RAWLOAD -D 100 -r ao_radio_xmit.ihx
+echo -n "Generating RF carrier. Please enter measured frequency: "
+read FREQ
+
+CAL_VALUE=`nickle -e "floor(434.55 / $FREQ * 1186611 + 0.5)"`
+
+echo "Programming flash with cal value " $CAL_VALUE
+$AOLOAD -D 100 --cal $CAL_VALUE /usr/share/altos/telebt-v0.1*.ihx $SERIAL
+
+echo "Serial number "$SERIAL" programmed with RF cal value "$CAL_VALUE
+echo "Unplug and replug USB, cu to the board, confirm freq and record power"
-altos (0.9.1) unstable; urgency=low
+altos (0.9.1.telemini.1) unstable; urgency=low
[ Keith Packard ]
* ao-load: fix usage message to note that '=' is required for options
[ Bdale Garbee ]
* tie bringup scripts to Bdale's bench TeleDongle
- -- Bdale Garbee <bdale@gag.com> Fri, 18 Feb 2011 23:55:58 -0700
+ -- Bdale Garbee <bdale@gag.com> Fri, 01 Apr 2011 20:02:12 -0600
altos (0.9) unstable; urgency=low