altos: Missing ao_pins files for usbtrng

Signed-off-by: Keith Packard <keithp@keithp.com>

diff --git a/src/usbtrng/ao_pins.h b/src/usbtrng/ao_pins.h
new file mode 100644 (file)
index 0000000..9c8fa83
--- /dev/null
+++ b/src/usbtrng/ao_pins.h
@@ -0,0 +1,74 @@
+/*
+ * Copyright © 2013 Keith Packard <keithp@keithp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+#define HAS_BEEP       0
+#define        HAS_LED         1
+
+#define AO_STACK_SIZE  384
+
+#define IS_FLASH_LOADER        0
+
+/* Crystal on the board */
+#define AO_LPC_CLKIN   12000000
+
+/* Main clock frequency. 48MHz for USB so we don't use the USB PLL */
+#define AO_LPC_CLKOUT  48000000
+
+/* System clock frequency */
+#define AO_LPC_SYSCLK  24000000
+
+#define HAS_USB                1
+
+#define HAS_USB_CONNECT        0
+#define HAS_USB_VBUS   0
+#define HAS_USB_PULLUP 1
+#define AO_USB_PULLUP_PORT     0
+#define AO_USB_PULLUP_PIN      6
+
+/* USART */
+
+#define HAS_SERIAL             1
+#define USE_SERIAL_0_STDIN     0
+#define SERIAL_0_18_19         1
+#define SERIAL_0_14_15         0
+#define SERIAL_0_17_18         0
+#define SERIAL_0_26_27         0
+
+/* SPI */
+
+#define HAS_SPI_0              0
+#define SPI_SCK0_P0_6          0
+#define HAS_SPI_1              1
+#define SPI_SCK1_P1_15         0
+#define SPI_MISO1_P0_22                1
+#define SPI_MOSI1_P0_21                0
+
+/* LED */
+
+#define LED_PORT               0
+#define LED_PIN_RED            3
+#define LED_PIN_GREEN          21
+#define AO_LED_RED             (1 << LED_PIN_RED)
+#define AO_LED_GREEN           (1 << LED_PIN_GREEN)
+
+#define LEDS_AVAILABLE         (AO_LED_RED|AO_LED_GREEN)
+
+/* Kludge the SPI driver to not configure any
+ * pin for SCK or MOSI
+ */
+#define HAS_SCK1               0
+#define HAS_MOSI1              0

diff --git a/src/usbtrng/flash-loader/ao_pins.h b/src/usbtrng/flash-loader/ao_pins.h
new file mode 100644 (file)
index 0000000..a804600
--- /dev/null
+++ b/src/usbtrng/flash-loader/ao_pins.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright © 2013 Keith Packard <keithp@keithp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+#ifndef _AO_PINS_H_
+#define _AO_PINS_H_
+
+#include <ao_flash_lpc_pins.h>
+
+#define AO_BOOT_PIN            1
+#define AO_BOOT_APPLICATION_GPIO       0
+#define AO_BOOT_APPLICATION_PIN                19
+#define AO_BOOT_APPLICATION_VALUE      1
+#define AO_BOOT_APPLICATION_MODE       AO_EXTI_MODE_PULL_UP
+
+#define HAS_USB_PULLUP         1
+#define AO_USB_PULLUP_PORT     0
+#define AO_USB_PULLUP_PIN      6
+
+#endif /* _AO_PINS_H_ */