working beep at around 4khz

diff --git a/COPYING b/COPYING
index 10828e06eca80e104cf90bc3fb8f6a4f3c6b2ae8..d60c31a97a544b53039088d14fe9114583c0efc3 100644 (file)
--- a/COPYING
+++ b/COPYING
@@ -1,9 +1,8 @@
-
                    GNU GENERAL PUBLIC LICENSE
                       Version 2, June 1991
 
  Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-                       51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+     59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  Everyone is permitted to copy and distribute verbatim copies
  of this license document, but changing it is not allowed.
 
@@ -306,7 +305,7 @@ the "copyright" line and a pointer to where the full notice is found.
 
     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
-    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 
 
 Also add information on how to contact you by electronic and paper mail.
@@ -314,7 +313,7 @@ Also add information on how to contact you by electronic and paper mail.
 If the program is interactive, make it output a short notice like this
 when it starts in an interactive mode:
 
-    Gnomovision version 69, Copyright (C) year name of author
+    Gnomovision version 69, Copyright (C) year  name of author
     Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
     This is free software, and you are welcome to redistribute it
     under certain conditions; type `show c' for details.

diff --git a/INSTALL b/INSTALL
index 23e5f25d0e5f85798dcfb368ecb2f04f59777f61..54caf7c190f28df0279ade5fee3d43b108480a14 100644 (file)
--- a/INSTALL
+++ b/INSTALL
@@ -1,16 +1,13 @@
-Installation Instructions
-*************************
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
+Foundation, Inc.
 
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free
-Software Foundation, Inc.
-
-This file is free documentation; the Free Software Foundation gives
+   This file is free documentation; the Free Software Foundation gives
 unlimited permission to copy, distribute and modify it.
 
 Basic Installation
 ==================
 
-These are generic installation instructions.
+   These are generic installation instructions.
 
    The `configure' shell script attempts to guess correct values for
 various system-dependent variables used during compilation.  It uses
@@ -70,9 +67,9 @@ The simplest way to compile this package is:
 Compilers and Options
 =====================
 
-Some systems require unusual options for compilation or linking that the
-`configure' script does not know about.  Run `./configure --help' for
-details on some of the pertinent environment variables.
+   Some systems require unusual options for compilation or linking that
+the `configure' script does not know about.  Run `./configure --help'
+for details on some of the pertinent environment variables.
 
    You can give `configure' initial values for configuration parameters
 by setting variables in the command line or in the environment.  Here
@@ -85,7 +82,7 @@ is an example:
 Compiling For Multiple Architectures
 ====================================
 
-You can compile the package for more than one kind of computer at the
+   You can compile the package for more than one kind of computer at the
 same time, by placing the object files for each architecture in their
 own directory.  To do this, you must use a version of `make' that
 supports the `VPATH' variable, such as GNU `make'.  `cd' to the
@@ -102,19 +99,19 @@ for another architecture.
 Installation Names
 ==================
 
-By default, `make install' installs the package's commands under
-`/usr/local/bin', include files under `/usr/local/include', etc.  You
-can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX'.
+   By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc.  You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PATH'.
 
    You can specify separate installation prefixes for
 architecture-specific files and architecture-independent files.  If you
-pass the option `--exec-prefix=PREFIX' to `configure', the package uses
-PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files still use the regular prefix.
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
 
    In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
+options like `--bindir=PATH' to specify different values for particular
 kinds of files.  Run `configure --help' for a list of the directories
 you can set and what kinds of files go in them.
 
@@ -125,7 +122,7 @@ option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
 Optional Features
 =================
 
-Some packages pay attention to `--enable-FEATURE' options to
+   Some packages pay attention to `--enable-FEATURE' options to
 `configure', where FEATURE indicates an optional part of the package.
 They may also pay attention to `--with-PACKAGE' options, where PACKAGE
 is something like `gnu-as' or `x' (for the X Window System).  The
@@ -140,11 +137,11 @@ you can use the `configure' options `--x-includes=DIR' and
 Specifying the System Type
 ==========================
 
-There may be some features `configure' cannot figure out automatically,
-but needs to determine by the type of machine the package will run on.
-Usually, assuming the package is built to be run on the _same_
-architectures, `configure' can figure that out, but if it prints a
-message saying it cannot guess the machine type, give it the
+   There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on.  Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
 `--build=TYPE' option.  TYPE can either be a short name for the system
 type, such as `sun4', or a canonical name which has the form:
 
@@ -159,7 +156,7 @@ where SYSTEM can have one of these forms:
 need to know the machine type.
 
    If you are _building_ compiler tools for cross-compiling, you should
-use the option `--target=TYPE' to select the type of system they will
+use the `--target=TYPE' option to select the type of system they will
 produce code for.
 
    If you want to _use_ a cross compiler, that generates code for a
@@ -170,9 +167,9 @@ eventually be run) with `--host=TYPE'.
 Sharing Defaults
 ================
 
-If you want to set default values for `configure' scripts to share, you
-can create a site shell script called `config.site' that gives default
-values for variables like `CC', `cache_file', and `prefix'.
+   If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
 `configure' looks for `PREFIX/share/config.site' if it exists, then
 `PREFIX/etc/config.site' if it exists.  Or, you can set the
 `CONFIG_SITE' environment variable to the location of the site script.
@@ -181,7 +178,7 @@ A warning: not all `configure' scripts look for a site script.
 Defining Variables
 ==================
 
-Variables not defined in a site shell script can be set in the
+   Variables not defined in a site shell script can be set in the
 environment passed to `configure'.  However, some packages may run
 configure again during the build, and the customized values of these
 variables may be lost.  In order to avoid this problem, you should set
@@ -189,18 +186,14 @@ them in the `configure' command line, using `VAR=value'.  For example:
 
      ./configure CC=/usr/local2/bin/gcc
 
-causes the specified `gcc' to be used as the C compiler (unless it is
-overridden in the site shell script).  Here is a another example:
-
-     /bin/bash ./configure CONFIG_SHELL=/bin/bash
-
-Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent
-configuration-related scripts to be executed by `/bin/bash'.
+will cause the specified gcc to be used as the C compiler (unless it is
+overridden in the site shell script).
 
 `configure' Invocation
 ======================
 
-`configure' recognizes the following options to control how it operates.
+   `configure' recognizes the following options to control how it
+operates.
 
 `--help'
 `-h'

diff --git a/Makefile.am b/Makefile.am
index 8a061ab74dadf02c172ec9b21bf938e2a45cb9d2..5341ab33bdce86bafc31b178fd3d1420bd8cedc1 100644 (file)
--- a/Makefile.am
+++ b/Makefile.am
@@ -1 +1 @@
-SUBDIRS=lib ccload s51 ccmanual target/blink
+SUBDIRS=lib ccload s51 ccmanual

diff --git a/target/beep/beep.c b/target/beep/beep.c
index 3dd31d540be120ffa724af301de28238544a17c6..09c915b7a0b0b069855fa42d4c8e926332527dcf 100644 (file)
--- a/target/beep/beep.c
+++ b/target/beep/beep.c
@@ -46,9 +46,11 @@ delay (unsigned char n)
        unsigned char i = 0;
 
        n <<= 1;
-       while (--n != 0)
+       while (--n != 0) {
+               i = 211;
                while (--i != 0)
                        nop();
+       }
 }
 
 void
@@ -84,6 +86,6 @@ main ()
        P2INP = 0x00;
        for (;;) {
                high();
-               low();
+/*             low();          */
        }
 }