doc: add flash-force instructions for TeleBT v3.0

diff --git a/doc/updating-firmware.inc b/doc/updating-firmware.inc
index ee2f5e9a340b8fb83ed5876bd4141eb19470fdb3..98e04cea6a8220b450f01e8a9235edad654134f8 100644 (file)
--- a/doc/updating-firmware.inc
+++ b/doc/updating-firmware.inc
@@ -136,6 +136,13 @@
                        of the board. Ground is available on the capacitor
                        next to it, on the end towards the USB wires.
                        
                        of the board. Ground is available on the capacitor
                        next to it, on the end towards the USB wires.
                        

+                       TeleBT v3::
+
+                       Connect pin 4 on the CPU to 3.3V, which can be done by
+                       connecting pin 1 to pin 4.  Pin 1 is the left pin on
+                       the lower edge of the chip when the unit is oriented
+                       such taht the SMA is at the top.
+

                        TeleBT v4::
 
                        Connect pin 30 on the CPU to ground. Pin 30 is the 6th
                        TeleBT v4::
 
                        Connect pin 30 on the CPU to ground. Pin 30 is the 6th