X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=blobdiff_plain;f=src%2Fteledongle-v1.8%2Fao_pins.h;fp=src%2Fteledongle-v1.8%2Fao_pins.h;h=0000000000000000000000000000000000000000;hp=72bea368efd7686f5a504f8d4d19ad7bf61f6fdb;hb=0686a7b8aec524d81bda4c572549a3a068ce0eed;hpb=6aa451ce81bfdfe679e3f9902043a5f0d235c745

diff --git a/src/teledongle-v1.8/ao_pins.h b/src/teledongle-v1.8/ao_pins.h
deleted file mode 100644
index 72bea368..00000000
--- a/src/teledongle-v1.8/ao_pins.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Copyright © 2012 Keith Packard <keithp@keithp.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- */
-
-/* Using TeleMetrum v1.9 board */
-
-#ifndef _AO_PINS_H_
-#define _AO_PINS_H_
-
-#define HAS_TASK_QUEUE		1
-
-/* 8MHz High speed external crystal */
-#define AO_HSE			8000000
-
-/* PLLVCO = 96MHz (so that USB will work) */
-#define AO_PLLMUL		12
-#define AO_RCC_CFGR_PLLMUL	(STM_RCC_CFGR_PLLMUL_12)
-
-/* SYSCLK = 32MHz (no need to go faster than CPU) */
-#define AO_PLLDIV		3
-#define AO_RCC_CFGR_PLLDIV	(STM_RCC_CFGR_PLLDIV_3)
-
-/* HCLK = 32MHz (CPU clock) */
-#define AO_AHB_PRESCALER	1
-#define AO_RCC_CFGR_HPRE_DIV	STM_RCC_CFGR_HPRE_DIV_1
-
-/* Run APB1 at 16MHz (HCLK/2) */
-#define AO_APB1_PRESCALER	2
-#define AO_RCC_CFGR_PPRE1_DIV	STM_RCC_CFGR_PPRE2_DIV_2
-
-/* Run APB2 at 16MHz (HCLK/2) */
-#define AO_APB2_PRESCALER	2
-#define AO_RCC_CFGR_PPRE2_DIV	STM_RCC_CFGR_PPRE2_DIV_2
-
-#define HAS_SERIAL_1		0
-#define USE_SERIAL_1_STDIN	0
-#define SERIAL_1_PB6_PB7	0
-#define SERIAL_1_PA9_PA10	0
-
-#define HAS_SERIAL_2		0
-#define USE_SERIAL_2_STDIN	0
-#define SERIAL_2_PA2_PA3	0
-#define SERIAL_2_PD5_PD6	0
-
-#define HAS_SERIAL_3		0
-#define USE_SERIAL_3_STDIN	0
-#define SERIAL_3_PB10_PB11	0
-#define SERIAL_3_PC10_PC11	0
-#define SERIAL_3_PD8_PD9	0
-
-#define HAS_EEPROM		1
-#define USE_INTERNAL_FLASH	1
-#define USE_STORAGE_CONFIG	0
-#define USE_EEPROM_CONFIG	1
-#define HAS_USB			1
-#define HAS_BEEP		0
-#define HAS_RADIO		1
-#define HAS_TELEMETRY		0
-#define HAS_RSSI		0
-
-#define HAS_SPI_1		0
-#define SPI_1_PA5_PA6_PA7	0	/* Barometer */
-#define SPI_1_PB3_PB4_PB5	0
-#define SPI_1_PE13_PE14_PE15	0	/* Accelerometer */
-
-#define HAS_SPI_2		1
-#define SPI_2_PB13_PB14_PB15	1	/* Radio */
-#define SPI_2_PD1_PD3_PD4	0
-#define SPI_2_OSPEEDR		STM_OSPEEDR_10MHz
-
-#define SPI_2_PORT		(&stm_gpiob)
-#define SPI_2_SCK_PIN		13
-#define SPI_2_MISO_PIN		14
-#define SPI_2_MOSI_PIN		15
-
-#define PACKET_HAS_SLAVE	0
-#define PACKET_HAS_MASTER	1
-
-#define LOW_LEVEL_DEBUG		0
-
-#define LED_PORT_0_ENABLE	STM_RCC_AHBENR_GPIOCEN
-#define LED_PORT_0		(&stm_gpioc)
-#define LED_PORT_0_MASK		(0xffff)
-#define LED_PORT_0_SHIFT	0
-#define LED_PIN_RED		8
-#define LED_PIN_GREEN		9
-#define AO_LED_RED		(1 << LED_PIN_RED)
-#define AO_LED_GREEN		(1 << LED_PIN_GREEN)
-
-#define LEDS_AVAILABLE		(AO_LED_RED | AO_LED_GREEN)
-
-#define HAS_GPS			0
-#define HAS_FLIGHT		0
-#define HAS_ADC			0
-#define HAS_LOG			0
-
-/*
- * Telemetry monitoring
- */
-#define HAS_MONITOR		1
-#define LEGACY_MONITOR		0
-#define HAS_MONITOR_PUT		1
-#define AO_MONITOR_LED		AO_LED_GREEN
-#define AO_MONITOR_BAD		AO_LED_RED
-
-/*
- * Radio (cc1200)
- */
-
-/* gets pretty close to 434.550 */
-
-#define AO_RADIO_CAL_DEFAULT 	5695733
-
-#define AO_FEC_DEBUG		0
-#define AO_CC1200_SPI_CS_PORT	(&stm_gpioc)
-#define AO_CC1200_SPI_CS_PIN	5
-#define AO_CC1200_SPI_BUS	AO_SPI_2_PB13_PB14_PB15
-#define AO_CC1200_SPI		stm_spi2
-
-#define AO_CC1200_INT_PORT	(&stm_gpioe)
-#define AO_CC1200_INT_PIN	1
-
-#define AO_CC1200_INT_GPIO	2
-#define AO_CC1200_INT_GPIO_IOCFG	CC1200_IOCFG2
-
-/*
- * Profiling Viterbi decoding
- */
-
-#ifndef AO_PROFILE
-#define AO_PROFILE	       	0
-#endif
-
-#endif /* _AO_PINS_H_ */