X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=blobdiff_plain;f=src%2Fmegadongle-v0.1%2Fao_pins.h;h=4d3ad4ddc5e483bd5a86a3ab913c5f18002601cf;hp=d460a49095b9a38fdd3fd93cb05cdbf122f91f37;hb=2da09b9f5649786f202aa0f295ead728939eddae;hpb=84d35e4cbd7ea2f681c43496b9b9db84f9dd923f

diff --git a/src/megadongle-v0.1/ao_pins.h b/src/megadongle-v0.1/ao_pins.h
index d460a490..4d3ad4dd 100644
--- a/src/megadongle-v0.1/ao_pins.h
+++ b/src/megadongle-v0.1/ao_pins.h
@@ -3,7 +3,8 @@
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful, but
  * WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -15,6 +16,8 @@
  * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
  */
 
+/* Using TeleMetrum v1.9 board */
+
 #ifndef _AO_PINS_H_
 #define _AO_PINS_H_
 
@@ -46,7 +49,7 @@
 #define HAS_SERIAL_1		0
 #define USE_SERIAL_1_STDIN	0
 #define SERIAL_1_PB6_PB7	0
-#define SERIAL_1_PA9_PA10	1
+#define SERIAL_1_PA9_PA10	0
 
 #define HAS_SERIAL_2		0
 #define USE_SERIAL_2_STDIN	0
@@ -56,19 +59,18 @@
 #define HAS_SERIAL_3		0
 #define USE_SERIAL_3_STDIN	0
 #define SERIAL_3_PB10_PB11	0
-#define SERIAL_3_PC10_PC11	1
+#define SERIAL_3_PC10_PC11	0
 #define SERIAL_3_PD8_PD9	0
 
-#define ao_gps_getchar		ao_serial3_getchar
-#define ao_gps_putchar		ao_serial3_putchar
-#define ao_gps_set_speed	ao_serial3_set_speed
-
-#define HAS_EEPROM		0
-#define USE_INTERNAL_FLASH	0
+#define HAS_EEPROM		1
+#define USE_INTERNAL_FLASH	1
+#define USE_STORAGE_CONFIG	0
+#define USE_EEPROM_CONFIG	1
 #define HAS_USB			1
 #define HAS_BEEP		0
 #define HAS_RADIO		1
 #define HAS_TELEMETRY		0
+#define HAS_RSSI		1
 
 #define HAS_SPI_1		0
 #define SPI_1_PA5_PA6_PA7	0	/* Barometer */
@@ -76,7 +78,7 @@
 #define SPI_1_PE13_PE14_PE15	0	/* Accelerometer */
 
 #define HAS_SPI_2		1
-#define SPI_2_PB13_PB14_PB15	1	/* Flash, Companion */
+#define SPI_2_PB13_PB14_PB15	1	/* Radio */
 #define SPI_2_PD1_PD3_PD4	0
 #define SPI_2_OSPEEDR		STM_OSPEEDR_10MHz
 
@@ -85,27 +87,17 @@
 #define SPI_2_MISO_PIN		14
 #define SPI_2_MOSI_PIN		15
 
-#define HAS_I2C_1		0
-#define I2C_1_PB8_PB9		1
-
-#define HAS_I2C_2		0
-#define I2C_2_PB10_PB11		1
-
 #define PACKET_HAS_SLAVE	0
 #define PACKET_HAS_MASTER	1
 
 #define LOW_LEVEL_DEBUG		0
 
-#define LED_PORT_0_ENABLE	STM_RCC_AHBENR_GPIOAEN
-#define LED_PORT_1_ENABLE	STM_RCC_AHBENR_GPIOBEN
-#define LED_PORT_0		(&stm_gpioa)
-#define LED_PORT_0_MASK		(0xff)
+#define LED_PORT_0_ENABLE	STM_RCC_AHBENR_GPIOCEN
+#define LED_PORT_0		(&stm_gpioc)
+#define LED_PORT_0_MASK		(0xffff)
 #define LED_PORT_0_SHIFT	0
-#define LED_PORT_1_MASK		(0xff00)
-#define LED_PORT_1_SHIFT	0
-#define LED_PORT_1		(&stm_gpiob)
-#define LED_PIN_RED		1
-#define LED_PIN_GREEN		12
+#define LED_PIN_RED		14
+#define LED_PIN_GREEN		15
 #define AO_LED_RED		(1 << LED_PIN_RED)
 #define AO_LED_GREEN		(1 << LED_PIN_GREEN)
 
@@ -134,15 +126,15 @@
 
 #define AO_FEC_DEBUG		0
 #define AO_CC1120_SPI_CS_PORT	(&stm_gpioa)
-#define AO_CC1120_SPI_CS_PIN	0
+#define AO_CC1120_SPI_CS_PIN	2
 #define AO_CC1120_SPI_BUS	AO_SPI_2_PB13_PB14_PB15
 #define AO_CC1120_SPI		stm_spi2
 
-#define AO_CC1120_INT_PORT	(&stm_gpioc)
-#define AO_CC1120_INT_PIN	13
+#define AO_CC1120_INT_PORT	(&stm_gpioa)
+#define AO_CC1120_INT_PIN	3
 
-#define AO_CC1120_MCU_WAKEUP_PORT	(&stm_gpioc)
-#define AO_CC1120_MCU_WAKEUP_PIN	(0)
+#define AO_CC1120_MCU_WAKEUP_PORT	(&stm_gpioa)
+#define AO_CC1120_MCU_WAKEUP_PIN	(4)
 
 #define AO_CC1120_INT_GPIO	2
 #define AO_CC1120_INT_GPIO_IOCFG	CC1120_IOCFG2