X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=blobdiff_plain;f=doc%2Ftelegps-quick-start.inc;fp=doc%2Ftelegps-quick-start.inc;h=6492743d68a173c97c12108bda55d7492f043d2d;hp=e8db8ac358197c866da520de41bafb31044b0cec;hb=4c1206a47431c7d873228fdd7328e1b9ac93a390;hpb=ef2ba847ca53a8ddfcddd4e51a0dd43c45161c85

diff --git a/doc/telegps-quick-start.inc b/doc/telegps-quick-start.inc
index e8db8ac3..6492743d 100644
--- a/doc/telegps-quick-start.inc
+++ b/doc/telegps-quick-start.inc
@@ -3,22 +3,21 @@
 	TeleGPS is designed to be easy to use. Requiring no external
 	components, flying takes just a few steps.
 
-	First, download and install the software from
+	1. First, download and install the software from
 	http://altusmetrum.org/AltOS. This will make sure that
 	you have the right device drivers installed.
 
-	Next, plug in the battery and USB cable and connect TeleGPS to
+	2. Next, plug in the battery and USB cable and connect TeleGPS to
 	your computer. This will charge the battery and allow you to
 	configure the device.
 
-	Start the TeleGPS application and set the callsign and frequency
-	on your TeleGPS device; refer to the Configure TeleGPS section
-	in the TeleGPS Application chapter for instructions.
+	3. Start the TeleGPS application and set the callsign and frequency
+	on your TeleGPS device; refer to <<_configure_device>> for instructions.
 
-	Unplug TeleGPS when the battery charger light goes green. This
+	4. Unplug TeleGPS when the battery charger light goes green. This
 	will enable the radio and logging portions of the TeleGPS
 	firmware.
 
-	Connect TeleDongle to your computer and start TeleGPS or start
+	5. Connect TeleDongle to your computer and start TeleGPS or start
 	AltosDroid on your android device and connect to TeleBT. Set the
 	frequency to match the TeleGPS and you should be receiving telemetry.