X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=blobdiff_plain;f=ao-tools%2Fao-chaosread%2Fao-chaosread.1;fp=ao-tools%2Fao-chaosread%2Fao-chaosread.1;h=0000000000000000000000000000000000000000;hp=94ca5ce9e0fc06d543415dc3b75aadb220325daf;hb=38630c65460b5e873a0df0fef937d498a37ea329;hpb=31f9ed231e63b214b405a141cabce3eb758e82e6

diff --git a/ao-tools/ao-chaosread/ao-chaosread.1 b/ao-tools/ao-chaosread/ao-chaosread.1
deleted file mode 100644
index 94ca5ce9..00000000
--- a/ao-tools/ao-chaosread/ao-chaosread.1
+++ /dev/null
@@ -1,60 +0,0 @@
-.\"
-.\" Copyright © 2016 Keith Packard <keithp@keithp.com>
-.\"
-.\" This program is free software; you can redistribute it and/or modify
-.\" it under the terms of the GNU General Public License as published by
-.\" the Free Software Foundation; either version 2 of the License, or
-.\" (at your option) any later version.
-.\"
-.\" This program is distributed in the hope that it will be useful, but
-.\" WITHOUT ANY WARRANTY; without even the implied warranty of
-.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-.\" General Public License for more details.
-.\"
-.\" You should have received a copy of the GNU General Public License along
-.\" with this program; if not, write to the Free Software Foundation, Inc.,
-.\" 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-.\"
-.\"
-.TH AO-LOAD 1 "ao-chaosread" ""
-.SH NAME
-ao-chaosread \- read raw noise source from chaoskey
-.SH SYNOPSIS
-.B "ao-chaosread"
-.SH DESCRIPTION
-.I ao-chaosread
-reads ADC values from the noise source on the attached ChaosKey device.
-.SH OPTIONS
-.TP
-\-s serial | --serial serial
-This selects a ChaosKey by serial number instead of using the first
-one found.
-.TP
-\-l length | --length length
-Set the amount of data to read. Suffixes 'k', 'M' and 'G' are
-supported. The default is 1k.
-.TP
-\-i | --infinite
-Read an unlimited amount of data.
-.TP
-\-b | --bytes
-For each 16-bit value read, output bits 1-8 as a byte, don't output
-bit 0 or bits 9-15 at all.
-.TP
-\-c | --cooked
-Read whitened data from the device. The default is to read raw data
-from the noise source.
-.TP
-\-r | --raw
-Read raw data from the noise source. This is the default.
-.TP
-\-f | --flash
-Read the contents of flash memory on the device. This loops through
-flash memory, so you can read the contents more than once, but there's
-no way to reset the pointer back to the start other than making sure
-you read the whole contents.
-.SH USAGE
-.I ao-chaosread
-reads noise data.
-.SH AUTHOR
-Keith Packard