X-Git-Url: https://git.gag.com/?p=fw%2Faltos;a=blobdiff_plain;f=ao-bringup%2Fturnon_teledongle_v0.2;fp=ao-bringup%2Fturnon_teledongle_v0.2;h=058e72cec590936c7073bae6755cf17c5fb27e5f;hp=0000000000000000000000000000000000000000;hb=91b1a80650a7dcd7c5bf819618a8cea0fceb37d9;hpb=26f61380ce6b4df80fa0b5a8a242cef79d5ae339 diff --git a/ao-bringup/turnon_teledongle_v0.2 b/ao-bringup/turnon_teledongle_v0.2 new file mode 100755 index 00000000..058e72ce --- /dev/null +++ b/ao-bringup/turnon_teledongle_v0.2 @@ -0,0 +1,58 @@ +#!/bin/sh + +if [ -x ../ao-tools/ao-load/ao-load ]; then + AOLOAD=../ao-tools/ao-load/ao-load +elif [ -x /usr/bin/ao-load ]; then + AOLOAD=/usr/bin/ao-load +else + echo "Can't find ao-load! Aborting." + exit 1 +fi + +if [ -x ../ao-tools/ao-rawload/ao-rawload ]; then + RAWLOAD=../ao-tools/ao-rawload/ao-rawload +elif [ -x /usr/bin/ao-rawload ]; then + RAWLOAD=/usr/bin/ao-rawload +else + echo "Can't find ao-rawload! Aborting." + exit 1 +fi + +echo "TeleDongle v0.2 Turn-On and Calibration Program" +echo "Copyright 2010 by Bdale Garbee. Released under GPL v2" +echo +echo "Expectations:" +echo "\tTeleDongle v0.2 powered from USB" +echo "\t\twith TIdongle (on /dev/ttyACM0) cabled to debug header" +echo "\t\twith coax from SMA to frequency counter" +echo +echo -n "TeleDongle serial number: " +read SERIAL + +echo $RAWLOAD + +case $USER in + bdale) + programmer=100 + ;; + keithp) + programmer=186 + ;; +esac + +$RAWLOAD -D $programmer -r ao_led_blink.ihx +echo "LEDs should be blinking" +sleep 5 + +$RAWLOAD -D $programmer -r ao_radio_xmit.ihx +echo -n "Generating RF carrier. Please enter measured frequency: " +read FREQ + +CAL_VALUE=`nickle -e "floor(434.55 / $FREQ * 1186611 + 0.5)"` + +echo "Programming flash with cal value " $CAL_VALUE +$AOLOAD -D $programmer --cal $CAL_VALUE /usr/share/altos/teledongle-v0.2*.ihx $SERIAL + +echo "Serial number "$SERIAL" programmed with RF cal value "$CAL_VALUE +echo $SERIAL","$CAL_VALUE >> cal_values +echo "Unplug and replug USB, cu to the board, confirm freq and record power"