altos: Add telerepeat-v1.0

[fw/altos] / src / telerepeat-v1.0 / ao_pins.h

diff --git a/src/telerepeat-v1.0/ao_pins.h b/src/telerepeat-v1.0/ao_pins.h
new file mode 100644 (file)
index 0000000..2a7dbd3
--- /dev/null
+++ b/src/telerepeat-v1.0/ao_pins.h
@@ -0,0 +1,111 @@
+/*
+ * Copyright © 2010 Keith Packard <keithp@keithp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+#ifndef _AO_PINS_H_
+#define _AO_PINS_H_
+
+#define HAS_RADIO              1
+#define HAS_RADIO_FORWARD      1
+#define HAS_FLIGHT             0
+#define HAS_USB                        1
+#define HAS_BEEP               0
+#define HAS_SERIAL_1           1
+#define HAS_SERIAL_1_ALT_1     1
+#define HAS_SERIAL_1_ALT_2     0
+#define HAS_SERIAL_1_HW_FLOW   1
+#define USE_SERIAL_1_STDIN     1
+#define DELAY_SERIAL_1_STDIN   1
+#define HAS_DBG                        1
+#define HAS_EEPROM             1
+#define HAS_LOG                        0
+#define USE_INTERNAL_FLASH     1
+#define HAS_BTM                        1
+#define DBG_ON_P1              1
+#define DBG_ON_P0              0
+#define PACKET_HAS_MASTER      1
+#define PACKET_HAS_SLAVE       0
+#define AO_LED_RED             1
+#define AO_LED_BLUE            2
+#define LEDS_AVAILABLE         (AO_LED_RED|AO_LED_BLUE)
+#define AO_MONITOR_LED         AO_LED_RED
+#define AO_BT_LED              AO_LED_BLUE
+#define BT_LINK_ON_P2          0
+#define BT_LINK_ON_P1          1
+#define BT_LINK_PIN_INDEX      7
+#define BT_LINK_PIN            P1_7
+#define HAS_MONITOR            1
+#define HAS_MONITOR_PUT                1
+#define LEGACY_MONITOR         0
+#define HAS_TELEMETRY          0
+#define AO_RADIO_REG_TEST      1
+
+#define HAS_ADC                        1
+#define AO_PAD_ADC_BATT                0
+#define AO_ADC_PINS            (1 << AO_PAD_ADC_BATT)
+
+struct ao_adc {
+       int16_t         batt;
+};
+
+#define AO_ADC_DUMP(p)                                                 \
+       printf ("tick: %5u batt %5d\n",                                 \
+               (p)->tick,                                              \
+               (p)->adc.batt)
+
+#define FETCH_ADC() do {                                               \
+               a = (uint8_t __xdata *) (&ao_data_ring[ao_data_head].adc.batt); \
+               a[0] = ADCL;                                            \
+               a[1] = ADCH;                                            \
+       } while (0)
+
+#if DBG_ON_P1
+
+       #define DBG_CLOCK       (1 << 4)        /* mi0 */
+       #define DBG_DATA        (1 << 5)        /* mo0 */
+       #define DBG_RESET_N     (1 << 3)        /* c0 */
+
+       #define DBG_CLOCK_PIN   (P1_4)
+       #define DBG_DATA_PIN    (P1_5)
+       #define DBG_RESET_N_PIN (P1_3)
+
+       #define DBG_PORT_NUM    1
+       #define DBG_PORT        P1
+       #define DBG_PORT_SEL    P1SEL
+       #define DBG_PORT_INP    P1INP
+       #define DBG_PORT_DIR    P1DIR
+
+#endif /* DBG_ON_P1 */
+
+#if DBG_ON_P0
+
+       #define DBG_CLOCK       (1 << 3)
+       #define DBG_DATA        (1 << 4)
+       #define DBG_RESET_N     (1 << 5)
+
+       #define DBG_CLOCK_PIN   (P0_3)
+       #define DBG_DATA_PIN    (P0_4)
+       #define DBG_RESET_N_PIN (P0_5)
+
+       #define DBG_PORT_NUM    0
+       #define DBG_PORT        P0
+       #define DBG_PORT_SEL    P0SEL
+       #define DBG_PORT_INP    P0INP
+       #define DBG_PORT_DIR    P0DIR
+
+#endif /* DBG_ON_P0 */
+
+#endif /* _AO_PINS_H_ */