+++ /dev/null
-/*
- * Copyright © 2012 Keith Packard <keithp@keithp.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- */
-
-#ifndef _AO_PINS_H_
-#define _AO_PINS_H_
-
-/* 8MHz High speed external crystal */
-#define AO_HSE 8000000
-
-/* PLLVCO = 96MHz (so that USB will work) */
-#define AO_PLLMUL 12
-#define AO_RCC_CFGR_PLLMUL (STM_RCC_CFGR_PLLMUL_12)
-
-/* SYSCLK = 32MHz (no need to go faster than CPU) */
-#define AO_PLLDIV 3
-#define AO_RCC_CFGR_PLLDIV (STM_RCC_CFGR_PLLDIV_3)
-
-/* HCLK = 32MHz (CPU clock) */
-#define AO_AHB_PRESCALER 1
-#define AO_RCC_CFGR_HPRE_DIV STM_RCC_CFGR_HPRE_DIV_1
-
-/* Run APB1 at 16MHz (HCLK/2) */
-#define AO_APB1_PRESCALER 2
-#define AO_RCC_CFGR_PPRE1_DIV STM_RCC_CFGR_PPRE2_DIV_2
-
-/* Run APB2 at 16MHz (HCLK/2) */
-#define AO_APB2_PRESCALER 2
-#define AO_RCC_CFGR_PPRE2_DIV STM_RCC_CFGR_PPRE2_DIV_2
-
-#define HAS_EEPROM 1
-#define USE_INTERNAL_FLASH 1
-#define HAS_USB 1
-#define HAS_BEEP 1
-#define HAS_RADIO 1
-#define HAS_TELEMETRY 0
-#define HAS_AES 1
-
-#define HAS_SPI_1 0
-#define SPI_1_PA5_PA6_PA7 0
-#define SPI_1_PB3_PB4_PB5 0
-#define SPI_1_PE13_PE14_PE15 0
-
-#define HAS_SPI_2 1 /* CC1111 */
-#define SPI_2_PB13_PB14_PB15 1
-#define SPI_2_PD1_PD3_PD4 0
-#define SPI_2_GPIO (&stm_gpiob)
-#define SPI_2_SCK 13
-#define SPI_2_MISO 14
-#define SPI_2_MOSI 15
-#define SPI_2_OSPEEDR STM_OSPEEDR_10MHz
-
-#define HAS_I2C_1 0
-
-#define HAS_I2C_2 0
-
-#define PACKET_HAS_SLAVE 0
-#define PACKET_HAS_MASTER 0
-
-/*
- * Radio is a cc1111 connected via SPI
- */
-#define AO_RADIO_CAL_DEFAULT 1186611
-
-#define AO_RADIO_SPI_BUS AO_SPI_2_PB13_PB14_PB15
-#define AO_RADIO_CS_PORT (&stm_gpiob)
-#define AO_RADIO_CS_PIN 12
-
-#define AO_RADIO_INT_PORT (&stm_gpioc)
-#define AO_RADIO_INT_PIN 14
-
-#define LOW_LEVEL_DEBUG 0
-
-#define LED_PORT_ENABLE STM_RCC_AHBENR_GPIOCEN
-#define LED_PORT (&stm_gpioc)
-#define LED_PIN_RED 7
-#define LED_PIN_GREEN 8
-#define LED_PIN_CONTINUITY_3 9
-#define LED_PIN_CONTINUITY_2 10
-#define LED_PIN_CONTINUITY_1 11
-#define LED_PIN_CONTINUITY_0 12
-#define LED_PIN_REMOTE_ARM 13
-#define AO_LED_RED (1 << LED_PIN_RED)
-#define AO_LED_GREEN (1 << LED_PIN_GREEN)
-#define AO_LED_CONTINUITY_3 (1 << LED_PIN_CONTINUITY_3)
-#define AO_LED_CONTINUITY_2 (1 << LED_PIN_CONTINUITY_2)
-#define AO_LED_CONTINUITY_1 (1 << LED_PIN_CONTINUITY_1)
-#define AO_LED_CONTINUITY_0 (1 << LED_PIN_CONTINUITY_0)
-
-#define AO_LED_CONTINUITY_NUM 4
-
-#define AO_LED_REMOTE_ARM (1 << LED_PIN_REMOTE_ARM)
-
-#define LEDS_AVAILABLE (AO_LED_RED | \
- AO_LED_GREEN | \
- AO_LED_CONTINUITY_3 | \
- AO_LED_CONTINUITY_2 | \
- AO_LED_CONTINUITY_1 | \
- AO_LED_CONTINUITY_0 | \
- AO_LED_REMOTE_ARM)
-
-/* LCD displays */
-
-#define AO_LCD_STM_SEG_ENABLED_0 ( \
- (1 << 0) | /* PA1 */ \
- (1 << 1) | /* PA2 */ \
- (1 << 2) | /* PA3 */ \
- (1 << 3) | /* PA6 */ \
- (1 << 4) | /* PA7 */ \
- (1 << 5) | /* PB0 */ \
- (1 << 6) | /* PB1 */ \
- (1 << 7) | /* PB3 */ \
- (0 << 8) | /* PB4 */ \
- (0 << 9) | /* PB5 */ \
- (0 << 10) | /* PB10 */ \
- (0 << 11) | /* PB11 */ \
- (0 << 12) | /* PB12 */ \
- (0 << 13) | /* PB13 */ \
- (0 << 14) | /* PB14 */ \
- (0 << 15) | /* PB15 */ \
- (0 << 16) | /* PB8 */ \
- (0 << 17) | /* PA15 */ \
- (0 << 18) | /* PC0 */ \
- (0 << 19) | /* PC1 */ \
- (0 << 20) | /* PC2 */ \
- (0 << 21) | /* PC3 */ \
- (0 << 22) | /* PC4 */ \
- (0 << 23) | /* PC5 */ \
- (0 << 24) | /* PC6 */ \
- (0 << 25) | /* PC7 */ \
- (0 << 26) | /* PC8 */ \
- (0 << 27) | /* PC9 */ \
- (0 << 28) | /* PC10 or PD8 */ \
- (0 << 29) | /* PC11 or PD9 */ \
- (0 << 30) | /* PC12 or PD10 */ \
- (0 << 31)) /* PD2 or PD11 */
-
-#define AO_LCD_STM_SEG_ENABLED_1 ( \
- (0 << 0) | /* PD12 */ \
- (0 << 1) | /* PD13 */ \
- (0 << 2) | /* PD14 */ \
- (0 << 3) | /* PD15 */ \
- (0 << 4) | /* PE0 */ \
- (0 << 5) | /* PE1 */ \
- (0 << 6) | /* PE2 */ \
- (0 << 7)) /* PE3 */
-
-#define AO_LCD_STM_COM_ENABLED ( \
- (1 << 0) | /* PA8 */ \
- (1 << 1) | /* PA9 */ \
- (1 << 2) | /* PA10 */ \
- (0 << 3) | /* PB9 */ \
- (0 << 4) | /* PC10 */ \
- (0 << 5) | /* PC11 */ \
- (0 << 6)) /* PC12 */
-
-#define AO_LCD_28_ON_C 0
-
-#define AO_LCD_DUTY STM_LCD_CR_DUTY_1_4
-
-#define AO_SEGMENT_0 0
-#define AO_SEGMENT_1 5
-#define AO_SEGMENT_2 1
-#define AO_SEGMENT_3 6
-#define AO_SEGMENT_4 4
-#define AO_SEGMENT_5 2
-#define AO_SEGMENT_6 3
-#define AO_SEGMENT_7 7
-
-/*
- * Use event queue for input devices
- */
-
-#define AO_EVENT 1
-
-/*
- * Knobs
- */
-
-#define AO_QUADRATURE_COUNT 2
-#define AO_QUADRATURE_MODE 0
-
-#define AO_QUADRATURE_0_PORT &stm_gpioc
-#define AO_QUADRATURE_0_A 3
-#define AO_QUADRATURE_0_B 2
-
-#define AO_QUADRATURE_PAD 0
-
-#define AO_QUADRATURE_1_PORT &stm_gpioc
-#define AO_QUADRATURE_1_A 1
-#define AO_QUADRATURE_1_B 0
-
-#define AO_QUADRATURE_BOX 1
-
-/*
- * Buttons
- */
-
-#define AO_BUTTON_COUNT 2
-#define AO_BUTTON_MODE AO_EXTI_MODE_PULL_UP
-
-#define AO_BUTTON_0_PORT &stm_gpioc
-#define AO_BUTTON_0 4
-
-#define AO_BUTTON_ARM 0
-
-#define AO_BUTTON_1_PORT &stm_gpioc
-#define AO_BUTTON_1 5
-
-#define AO_BUTTON_FIRE 1
-
-#endif /* _AO_PINS_H_ */
projects / fw / altos / blobdiff