altos/cc1200: Wait for packet to be placed in FIFO during receive
[fw/altos] / src / drivers / ao_cc1200.c
index 930680b286722ec7bf96c0eb6a0faa886d3b515f..93bb2c6c4f752b5794585ea663235d1202cb1bf7 100644 (file)
@@ -599,14 +599,20 @@ ao_radio_set_mode(uint16_t new_mode)
                }
        }
 
-       if (changes & AO_RADIO_MODE_BITS_TX_BUF)
+       if (changes & AO_RADIO_MODE_BITS_TX_BUF) {
                ao_radio_reg_write(AO_CC1200_INT_GPIO_IOCFG, CC1200_IOCFG_GPIO_CFG_TXFIFO_THR);
+               ao_exti_set_mode(AO_CC1200_INT_PORT, AO_CC1200_INT_PIN, AO_EXTI_MODE_FALLING|AO_EXTI_PRIORITY_HIGH);
+       }
 
-       if (changes & AO_RADIO_MODE_BITS_TX_FINISH)
+       if (changes & AO_RADIO_MODE_BITS_TX_FINISH) {
                ao_radio_reg_write(AO_CC1200_INT_GPIO_IOCFG, CC1200_IOCFG_GPIO_CFG_PKT_SYNC_RXTX);
+               ao_exti_set_mode(AO_CC1200_INT_PORT, AO_CC1200_INT_PIN, AO_EXTI_MODE_FALLING|AO_EXTI_PRIORITY_HIGH);
+       }
 
-       if (changes & AO_RADIO_MODE_BITS_RX)
-               ao_radio_reg_write(AO_CC1200_INT_GPIO_IOCFG, CC1200_IOCFG_GPIO_CFG_PKT_SYNC_RXTX);
+       if (changes & AO_RADIO_MODE_BITS_RX) {
+               ao_radio_reg_write(AO_CC1200_INT_GPIO_IOCFG, CC1200_IOCFG_GPIO_CFG_MARC_MCU_WAKEUP);
+               ao_exti_set_mode(AO_CC1200_INT_PORT, AO_CC1200_INT_PIN, AO_EXTI_MODE_RISING|AO_EXTI_PRIORITY_HIGH);
+       }
 
        if (changes & AO_RADIO_MODE_BITS_RDF)
                ao_radio_set_regs(rdf_setup);
@@ -709,20 +715,6 @@ ao_radio_show_state(char *where)
 static void
 ao_radio_wait_isr(uint16_t timeout)
 {
-       uint8_t state;
-
-       state = ao_radio_state();
-       switch (state) {
-       case CC1200_STATUS_STATE_IDLE:
-       case CC1200_STATUS_STATE_RX_FIFO_ERROR:
-       case CC1200_STATUS_STATE_TX_FIFO_ERROR:
-#if CC1200_LOW_LEVEL_DEBUG
-               printf("before wait, state %d\n", state); flush();
-#endif
-               ao_radio_abort = 1;
-               return;
-       }
-
        if (timeout)
                ao_alarm(timeout);
 
@@ -731,6 +723,7 @@ ao_radio_wait_isr(uint16_t timeout)
                if (ao_sleep(&ao_radio_wake))
                        ao_radio_abort = 1;
        ao_arch_release_interrupts();
+
        if (timeout)
                ao_clear_alarm();
 }
@@ -1005,14 +998,80 @@ ao_radio_dump_state(struct ao_radio_state *s)
 uint8_t
 ao_radio_recv(__xdata void *d, uint8_t size, uint8_t timeout)
 {
-       ao_radio_abort = 0;
+       uint8_t success = 0;
 
+       ao_radio_abort = 0;
        ao_radio_get(size - 2);
        ao_radio_set_mode(AO_RADIO_MODE_PACKET_RX);
        ao_radio_wake = 0;
        ao_radio_start_rx();
-       ao_radio_wait_isr(timeout);
-       if (ao_radio_wake) {
+
+       while (!ao_radio_abort) {
+               ao_radio_wait_isr(timeout);
+               if (ao_radio_wake) {
+                       uint8_t         marc_status1 = ao_radio_reg_read(CC1200_MARC_STATUS1);
+
+                       /* Check the receiver status to see what happened
+                        */
+                       switch (marc_status1) {
+                       case CC1200_MARC_STATUS1_RX_FINISHED:
+                       case CC1200_MARC_STATUS1_ADDRESS:
+                       case CC1200_MARC_STATUS1_CRC:
+                               /* Normal return, go fetch the bytes from the FIFO
+                                * and give them back to the caller
+                                */
+                               success = 1;
+                               break;
+                       case CC1200_MARC_STATUS1_RX_TIMEOUT:
+                       case CC1200_MARC_STATUS1_RX_TERMINATION:
+                       case CC1200_MARC_STATUS1_EWOR_SYNC_LOST:
+                       case CC1200_MARC_STATUS1_MAXIMUM_LENGTH:
+                       case CC1200_MARC_STATUS1_RX_FIFO_OVERFLOW:
+                       case CC1200_MARC_STATUS1_RX_FIFO_UNDERFLOW:
+                               /* Something weird happened; reset the radio and
+                                * return failure
+                                */
+                               success = 0;
+                               break;
+                       default:
+                               /* some other status; go wait for the radio to do something useful
+                                */
+                               continue;
+                       }
+                       break;
+               } else {
+                       uint8_t modem_status1 = ao_radio_reg_read(CC1200_MODEM_STATUS1);
+
+                       /* Check to see if the packet header has been seen, in which case we'll
+                        * want to keep waiting for the rest of the packet to appear
+                        */
+                       if (modem_status1 & ((1 << CC1200_MODEM_STATUS1_SYNC_FOUND) |
+                                            (1 << CC1200_MODEM_STATUS1_PQT_REACHED)))
+                       {
+                               ao_radio_abort = 0;
+
+                               /* Set a timeout based on the packet length so that we make sure to
+                                * wait long enough to receive the whole thing.
+                                *
+                                * timeout = bits * FEC expansion / rate
+                                */
+                               switch (ao_config.radio_rate) {
+                               default:
+                               case AO_RADIO_RATE_38400:
+                                       timeout = AO_MS_TO_TICKS(size * (8 * 2 * 10) / 384) + 1;
+                                       break;
+                               case AO_RADIO_RATE_9600:
+                                       timeout = AO_MS_TO_TICKS(size * (8 * 2 * 10) / 96) + 1;
+                                       break;
+                               case AO_RADIO_RATE_2400:
+                                       timeout = AO_MS_TO_TICKS(size * (8 * 2 * 10) / 24) + 1;
+                                       break;
+                               }
+                       }
+               }
+       }
+
+       if (success) {
                int8_t  rssi;
                uint8_t status;
 
@@ -1033,7 +1092,7 @@ ao_radio_recv(__xdata void *d, uint8_t size, uint8_t timeout)
        }
 
        ao_radio_put();
-       return ao_radio_wake;
+       return success;
 }