+++ /dev/null
-/*-------------------------------------------------------------------------
- Register Declarations for the ChipCon CC1111 Processor Range
-
- Copyright © 2008 Keith Packard <keithp@keithp.com>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License along
- with this program; if not, write to the Free Software Foundation, Inc.,
- 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
- Adapted from the Cygnal C8051F12x config file which is:
-
- Copyright (C) 2003 - Maarten Brock, sourceforge.brock@dse.nl
-
- This library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Lesser General Public
- License as published by the Free Software Foundation; either
- version 2.1 of the License, or (at your option) any later version.
-
- This library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Lesser General Public License for more details.
-
- You should have received a copy of the GNU Lesser General Public
- License along with this library; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
--------------------------------------------------------------------------*/
-
-#ifndef _CC1111_H_
-#define _CC1111_H_
-#include <cc1110.h>
-#include <stdint.h>
-
-__sfr __at 0xA8 IEN0; /* Interrupt Enable 0 Register */
-
-__sbit __at 0xA8 RFTXRXIE; /* RF TX/RX done interrupt enable */
-__sbit __at 0xA9 ADCIE; /* ADC interrupt enable */
-__sbit __at 0xAA URX0IE; /* USART0 RX interrupt enable */
-__sbit __at 0xAB URX1IE; /* USART1 RX interrupt enable (shared with I2S RX) */
-__sbit __at 0xAB I2SRXIE; /* I2S RX interrupt enable (shared with USART1 RX) */
-__sbit __at 0xAC ENCIE; /* AES encryption/decryption interrupt enable */
-__sbit __at 0xAD STIE; /* Sleep Timer interrupt enable */
-__sbit __at 0xAF EA; /* Enable All */
-
-#define IEN0_EA (1 << 7)
-#define IEN0_STIE (1 << 5)
-#define IEN0_ENCIE (1 << 4)
-#define IEN0_URX1IE (1 << 3)
-#define IEN0_I2SRXIE (1 << 3)
-#define IEN0_URX0IE (1 << 2)
-#define IEN0_ADCIE (1 << 1)
-#define IEN0_RFTXRXIE (1 << 0)
-
-__sfr __at 0xB8 IEN1; /* Interrupt Enable 1 Register */
-
-#define IEN1_P0IE (1 << 5) /* Port 0 interrupt enable */
-#define IEN1_T4IE (1 << 4) /* Timer 4 interrupt enable */
-#define IEN1_T3IE (1 << 3) /* Timer 3 interrupt enable */
-#define IEN1_T2IE (1 << 2) /* Timer 2 interrupt enable */
-#define IEN1_T1IE (1 << 1) /* Timer 1 interrupt enable */
-#define IEN1_DMAIE (1 << 0) /* DMA transfer interrupt enable */
-
-/* IEN2 */
-__sfr __at 0x9A IEN2; /* Interrupt Enable 2 Register */
-
-#define IEN2_WDTIE (1 << 5) /* Watchdog timer interrupt enable */
-#define IEN2_P1IE (1 << 4) /* Port 1 interrupt enable */
-#define IEN2_UTX1IE (1 << 3) /* USART1 TX interrupt enable */
-#define IEN2_I2STXIE (1 << 3) /* I2S TX interrupt enable */
-#define IEN2_UTX0IE (1 << 2) /* USART0 TX interrupt enable */
-#define IEN2_P2IE (1 << 1) /* Port 2 interrupt enable */
-#define IEN2_USBIE (1 << 1) /* USB interrupt enable */
-#define IEN2_RFIE (1 << 0) /* RF general interrupt enable */
-
-/* CLKCON 0xC6 */
-__sfr __at 0xC6 CLKCON; /* Clock Control */
-
-#define CLKCON_OSC32K_RC (1 << 7)
-#define CLKCON_OSC32K_XTAL (0 << 7)
-#define CLKCON_OSC32K_MASK (1 << 7)
-#define CLKCON_OSC_RC (1 << 6)
-#define CLKCON_OSC_XTAL (0 << 6)
-#define CLKCON_OSC_MASK (1 << 6)
-#define CLKCON_TICKSPD_MASK (7 << 3)
-# define CLKCON_TICKSPD_1 (0 << 3)
-# define CLKCON_TICKSPD_1_2 (1 << 3)
-# define CLKCON_TICKSPD_1_4 (2 << 3)
-# define CLKCON_TICKSPD_1_8 (3 << 3)
-# define CLKCON_TICKSPD_1_16 (4 << 3)
-# define CLKCON_TICKSPD_1_32 (5 << 3)
-# define CLKCON_TICKSPD_1_64 (6 << 3)
-# define CLKCON_TICKSPD_1_128 (7 << 3)
-
-#define CLKCON_CLKSPD_MASK (7 << 0)
-# define CLKCON_CLKSPD_1 (0 << 0)
-# define CLKCON_CLKSPD_1_2 (1 << 0)
-# define CLKCON_CLKSPD_1_4 (2 << 0)
-# define CLKCON_CLKSPD_1_8 (3 << 0)
-# define CLKCON_CLKSPD_1_16 (4 << 0)
-# define CLKCON_CLKSPD_1_32 (5 << 0)
-# define CLKCON_CLKSPD_1_64 (6 << 0)
-# define CLKCON_CLKSPD_1_128 (7 << 0)
-
-/* SLEEP 0xBE */
-#define SLEEP_USB_EN (1 << 7)
-#define SLEEP_XOSC_STB (1 << 6)
-#define SLEEP_HFRC_STB (1 << 5)
-#define SLEEP_RST_POWER (0 << 3)
-#define SLEEP_RST_EXTERNAL (1 << 3)
-#define SLEEP_RST_WATCHDOG (2 << 3)
-#define SLEEP_RST_MASK (3 << 3)
-#define SLEEP_OSC_PD (1 << 2)
-#define SLEEP_MODE_PM0 (0 << 0)
-#define SLEEP_MODE_PM1 (1 << 0)
-#define SLEEP_MODE_PM2 (2 << 0)
-#define SLEEP_MODE_PM3 (3 << 0)
-#define SLEEP_MODE_MASK (3 << 0)
-
-/* PCON 0x87 */
-__sfr __at 0x87 PCON; /* Power Mode Control Register */
-
-#define PCON_IDLE (1 << 0)
-
-/*
- * TCON
- */
-__sfr __at 0x88 TCON; /* CPU Interrupt Flag 1 */
-
-__sbit __at 0x8F URX1IF; /* USART1 RX interrupt flag. Automatically cleared */
-__sbit __at 0x8F I2SRXIF; /* I2S RX interrupt flag. Automatically cleared */
-__sbit __at 0x8D ADCIF; /* ADC interrupt flag. Automatically cleared */
-__sbit __at 0x8B URX0IF; /* USART0 RX interrupt flag. Automatically cleared */
-__sbit __at 0x89 RFTXRXIF; /* RF TX/RX complete interrupt flag. Automatically cleared */
-
-#define TCON_URX1IF (1 << 7)
-#define TCON_I2SRXIF (1 << 7)
-#define TCON_ADCIF (1 << 5)
-#define TCON_URX0IF (1 << 3)
-#define TCON_RFTXRXIF (1 << 1)
-
-/*
- * S0CON
- */
-__sfr __at 0x98 S0CON; /* CPU Interrupt Flag 2 */
-
-__sbit __at 0x98 ENCIF_0; /* AES interrupt 0. */
-__sbit __at 0x99 ENCIF_1; /* AES interrupt 1. */
-
-#define S0CON_ENCIF_1 (1 << 1)
-#define S0CON_ENCIF_0 (1 << 0)
-
-/*
- * S1CON
- */
-__sfr __at 0x9B S1CON; /* CPU Interrupt Flag 3 */
-
-#define S1CON_RFIF_1 (1 << 1)
-#define S1CON_RFIF_0 (1 << 0)
-
-/*
- * IRCON
- */
-__sfr __at 0xC0 IRCON; /* CPU Interrupt Flag 4 */
-
-__sbit __at 0xC0 DMAIF; /* DMA complete interrupt flag */
-__sbit __at 0xC1 T1IF; /* Timer 1 interrupt flag. Automatically cleared */
-__sbit __at 0xC2 T2IF; /* Timer 2 interrupt flag. Automatically cleared */
-__sbit __at 0xC3 T3IF; /* Timer 3 interrupt flag. Automatically cleared */
-__sbit __at 0xC4 T4IF; /* Timer 4 interrupt flag. Automatically cleared */
-__sbit __at 0xC5 P0IF; /* Port0 interrupt flag */
-__sbit __at 0xC7 STIF; /* Sleep Timer interrupt flag */
-
-#define IRCON_DMAIF (1 << 0) /* DMA complete interrupt flag */
-#define IRCON_T1IF (1 << 1) /* Timer 1 interrupt flag. Automatically cleared */
-#define IRCON_T2IF (1 << 2) /* Timer 2 interrupt flag. Automatically cleared */
-#define IRCON_T3IF (1 << 3) /* Timer 3 interrupt flag. Automatically cleared */
-#define IRCON_T4IF (1 << 4) /* Timer 4 interrupt flag. Automatically cleared */
-#define IRCON_P0IF (1 << 5) /* Port0 interrupt flag */
-#define IRCON_STIF (1 << 7) /* Sleep Timer interrupt flag */
-
-/*
- * IRCON2
- */
-__sfr __at 0xE8 IRCON2; /* CPU Interrupt Flag 5 */
-
-__sbit __at 0xE8 USBIF; /* USB interrupt flag (shared with Port2) */
-__sbit __at 0xE8 P2IF; /* Port2 interrupt flag (shared with USB) */
-__sbit __at 0xE9 UTX0IF; /* USART0 TX interrupt flag */
-__sbit __at 0xEA UTX1IF; /* USART1 TX interrupt flag (shared with I2S TX) */
-__sbit __at 0xEA I2STXIF; /* I2S TX interrupt flag (shared with USART1 TX) */
-__sbit __at 0xEB P1IF; /* Port1 interrupt flag */
-__sbit __at 0xEC WDTIF; /* Watchdog timer interrupt flag */
-
-#define IRCON2_USBIF (1 << 0) /* USB interrupt flag (shared with Port2) */
-#define IRCON2_P2IF (1 << 0) /* Port2 interrupt flag (shared with USB) */
-#define IRCON2_UTX0IF (1 << 1) /* USART0 TX interrupt flag */
-#define IRCON2_UTX1IF (1 << 2) /* USART1 TX interrupt flag (shared with I2S TX) */
-#define IRCON2_I2STXIF (1 << 2) /* I2S TX interrupt flag (shared with USART1 TX) */
-#define IRCON2_P1IF (1 << 3) /* Port1 interrupt flag */
-#define IRCON2_WDTIF (1 << 4) /* Watchdog timer interrupt flag */
-
-/*
- * IP1 - Interrupt Priority 1
- */
-
-/*
- * Interrupt priority groups:
- *
- * IPG0 RFTXRX RF DMA
- * IPG1 ADC T1 P2INT/USB
- * IPG2 URX0 T2 UTX0
- * IPG3 URX1/I2SRX T3 UTX1 / I2STX
- * IPG4 ENC T4 P1INT
- * IPG5 ST P0INT WDT
- *
- * Priority = (IP1 << 1) | IP0. Higher priority interrupts served first
- */
-
-__sfr __at 0xB9 IP1; /* Interrupt Priority 1 */
-__sfr __at 0xA9 IP0; /* Interrupt Priority 0 */
-
-#define IP1_IPG5 (1 << 5)
-#define IP1_IPG4 (1 << 4)
-#define IP1_IPG3 (1 << 3)
-#define IP1_IPG2 (1 << 2)
-#define IP1_IPG1 (1 << 1)
-#define IP1_IPG0 (1 << 0)
-
-#define IP0_IPG5 (1 << 5)
-#define IP0_IPG4 (1 << 4)
-#define IP0_IPG3 (1 << 3)
-#define IP0_IPG2 (1 << 2)
-#define IP0_IPG1 (1 << 1)
-#define IP0_IPG0 (1 << 0)
-
-/*
- * Timer 1
- */
-#define T1CTL_MODE_SUSPENDED (0 << 0)
-#define T1CTL_MODE_FREE (1 << 0)
-#define T1CTL_MODE_MODULO (2 << 0)
-#define T1CTL_MODE_UP_DOWN (3 << 0)
-#define T1CTL_MODE_MASK (3 << 0)
-#define T1CTL_DIV_1 (0 << 2)
-#define T1CTL_DIV_8 (1 << 2)
-#define T1CTL_DIV_32 (2 << 2)
-#define T1CTL_DIV_128 (3 << 2)
-#define T1CTL_DIV_MASK (3 << 2)
-#define T1CTL_OVFIF (1 << 4)
-#define T1CTL_CH0IF (1 << 5)
-#define T1CTL_CH1IF (1 << 6)
-#define T1CTL_CH2IF (1 << 7)
-
-#define T1CCTL_NO_CAPTURE (0 << 0)
-#define T1CCTL_CAPTURE_RISING (1 << 0)
-#define T1CCTL_CAPTURE_FALLING (2 << 0)
-#define T1CCTL_CAPTURE_BOTH (3 << 0)
-#define T1CCTL_CAPTURE_MASK (3 << 0)
-
-#define T1CCTL_MODE_CAPTURE (0 << 2)
-#define T1CCTL_MODE_COMPARE (1 << 2)
-
-#define T1CTL_CMP_SET (0 << 3)
-#define T1CTL_CMP_CLEAR (1 << 3)
-#define T1CTL_CMP_TOGGLE (2 << 3)
-#define T1CTL_CMP_SET_CLEAR (3 << 3)
-#define T1CTL_CMP_CLEAR_SET (4 << 3)
-
-#define T1CTL_IM_DISABLED (0 << 6)
-#define T1CTL_IM_ENABLED (1 << 6)
-
-#define T1CTL_CPSEL_NORMAL (0 << 7)
-#define T1CTL_CPSEL_RF (1 << 7)
-
-/*
- * Timer 3 and Timer 4
- */
-
-/* Timer count */
-__sfr __at 0xCA T3CNT;
-__sfr __at 0xEA T4CNT;
-
-/* Timer control */
-
-__sfr __at 0xCB T3CTL;
-__sfr __at 0xEB T4CTL;
-
-#define TxCTL_DIV_1 (0 << 5)
-#define TxCTL_DIV_2 (1 << 5)
-#define TxCTL_DIV_4 (2 << 5)
-#define TxCTL_DIV_8 (3 << 5)
-#define TxCTL_DIV_16 (4 << 5)
-#define TxCTL_DIV_32 (5 << 5)
-#define TxCTL_DIV_64 (6 << 5)
-#define TxCTL_DIV_128 (7 << 5)
-#define TxCTL_START (1 << 4)
-#define TxCTL_OVFIM (1 << 3)
-#define TxCTL_CLR (1 << 2)
-#define TxCTL_MODE_FREE (0 << 0)
-#define TxCTL_MODE_DOWN (1 << 0)
-#define TxCTL_MODE_MODULO (2 << 0)
-#define TxCTL_MODE_UP_DOWN (3 << 0)
-
-/* Timer 4 channel 0 compare control */
-
-__sfr __at 0xCC T3CCTL0;
-__sfr __at 0xCE T3CCTL1;
-__sfr __at 0xEC T4CCTL0;
-__sfr __at 0xEE T4CCTL1;
-
-#define TxCCTLy_IM (1 << 6)
-#define TxCCTLy_CMP_SET (0 << 3)
-#define TxCCTLy_CMP_CLEAR (1 << 3)
-#define TxCCTLy_CMP_TOGGLE (2 << 3)
-#define TxCCTLy_CMP_SET_UP_CLEAR_DOWN (3 << 3)
-#define TxCCTLy_CMP_CLEAR_UP_SET_DOWN (4 << 3)
-#define TxCCTLy_CMP_SET_CLEAR_FF (5 << 3)
-#define TxCCTLy_CMP_CLEAR_SET_00 (6 << 3)
-#define TxCCTLy_CMP_MODE_ENABLE (1 << 2)
-
-/* Timer compare value */
-__sfr __at 0xCD T3CC0;
-__sfr __at 0xCF T3CC1;
-__sfr __at 0xED T4CC0;
-__sfr __at 0xEF T4CC1;
-
-/*
- * Peripheral control
- */
-
-__sfr __at 0xf1 PERCFG;
-#define PERCFG_T1CFG_ALT_1 (0 << 6)
-#define PERCFG_T1CFG_ALT_2 (1 << 6)
-#define PERCFG_T1CFG_ALT_MASK (1 << 6)
-
-#define PERCFG_T3CFG_ALT_1 (0 << 5)
-#define PERCFG_T3CFG_ALT_2 (1 << 5)
-#define PERCFG_T3CFG_ALT_MASK (1 << 5)
-
-#define PERCFG_T4CFG_ALT_1 (0 << 4)
-#define PERCFG_T4CFG_ALT_2 (1 << 4)
-#define PERCFG_T4CFG_ALT_MASK (1 << 4)
-
-#define PERCFG_U1CFG_ALT_1 (0 << 1)
-#define PERCFG_U1CFG_ALT_2 (1 << 1)
-#define PERCFG_U1CFG_ALT_MASK (1 << 1)
-
-#define PERCFG_U0CFG_ALT_1 (0 << 0)
-#define PERCFG_U0CFG_ALT_2 (1 << 0)
-#define PERCFG_U0CFG_ALT_MASK (1 << 0)
-
-/* directly addressed USB registers */
-__xdata __at (0xde00) volatile uint8_t USBADDR;
-__xdata __at (0xde01) volatile uint8_t USBPOW;
-__xdata __at (0xde02) volatile uint8_t USBIIF;
-
-__xdata __at (0xde04) volatile uint8_t USBOIF;
-
-__xdata __at (0xde06) volatile uint8_t USBCIF;
-
-# define USBCIF_SOFIF (1 << 3)
-# define USBCIF_RSTIF (1 << 2)
-# define USBCIF_RESUMEIF (1 << 1)
-# define USBCIF_SUSPENDIF (1 << 0)
-
-__xdata __at (0xde07) volatile uint8_t USBIIE;
-
-__xdata __at (0xde09) volatile uint8_t USBOIE;
-
-__xdata __at (0xde0b) volatile uint8_t USBCIE;
-
-# define USBCIE_SOFIE (1 << 3)
-# define USBCIE_RSTIE (1 << 2)
-# define USBCIE_RESUMEIE (1 << 1)
-# define USBCIE_SUSPENDIE (1 << 0)
-
-__xdata __at (0xde0c) volatile uint8_t USBFRML;
-__xdata __at (0xde0d) volatile uint8_t USBFRMH;
-__xdata __at (0xde0e) volatile uint8_t USBINDEX;
-
-/* indexed USB registers, must set USBINDEX to 0-5 */
-__xdata __at (0xde10) volatile uint8_t USBMAXI;
-__xdata __at (0xde11) volatile uint8_t USBCS0;
-
-# define USBCS0_CLR_SETUP_END (1 << 7)
-# define USBCS0_CLR_OUTPKT_RDY (1 << 6)
-# define USBCS0_SEND_STALL (1 << 5)
-# define USBCS0_SETUP_END (1 << 4)
-# define USBCS0_DATA_END (1 << 3)
-# define USBCS0_SENT_STALL (1 << 2)
-# define USBCS0_INPKT_RDY (1 << 1)
-# define USBCS0_OUTPKT_RDY (1 << 0)
-
-__xdata __at (0xde11) volatile uint8_t USBCSIL;
-
-# define USBCSIL_CLR_DATA_TOG (1 << 6)
-# define USBCSIL_SENT_STALL (1 << 5)
-# define USBCSIL_SEND_STALL (1 << 4)
-# define USBCSIL_FLUSH_PACKET (1 << 3)
-# define USBCSIL_UNDERRUN (1 << 2)
-# define USBCSIL_PKT_PRESENT (1 << 1)
-# define USBCSIL_INPKT_RDY (1 << 0)
-
-__xdata __at (0xde12) volatile uint8_t USBCSIH;
-
-# define USBCSIH_AUTOSET (1 << 7)
-# define USBCSIH_ISO (1 << 6)
-# define USBCSIH_FORCE_DATA_TOG (1 << 3)
-# define USBCSIH_IN_DBL_BUF (1 << 0)
-
-__xdata __at (0xde13) volatile uint8_t USBMAXO;
-__xdata __at (0xde14) volatile uint8_t USBCSOL;
-
-# define USBCSOL_CLR_DATA_TOG (1 << 7)
-# define USBCSOL_SENT_STALL (1 << 6)
-# define USBCSOL_SEND_STALL (1 << 5)
-# define USBCSOL_FLUSH_PACKET (1 << 4)
-# define USBCSOL_DATA_ERROR (1 << 3)
-# define USBCSOL_OVERRUN (1 << 2)
-# define USBCSOL_FIFO_FULL (1 << 1)
-# define USBCSOL_OUTPKT_RDY (1 << 0)
-
-__xdata __at (0xde15) volatile uint8_t USBCSOH;
-
-# define USBCSOH_AUTOCLEAR (1 << 7)
-# define USBCSOH_ISO (1 << 6)
-# define USBCSOH_OUT_DBL_BUF (1 << 0)
-
-__xdata __at (0xde16) volatile uint8_t USBCNT0;
-__xdata __at (0xde16) volatile uint8_t USBCNTL;
-__xdata __at (0xde17) volatile uint8_t USBCNTH;
-
-__xdata __at (0xde20) volatile uint8_t USBFIFO[12];
-
-/* ADC Data register, low and high */
-__sfr __at 0xBA ADCL;
-__sfr __at 0xBB ADCH;
-__xdata __at (0xDFBA) volatile uint16_t ADCXDATA;
-
-/* ADC Control Register 1 */
-__sfr __at 0xB4 ADCCON1;
-
-# define ADCCON1_EOC (1 << 7) /* conversion complete */
-# define ADCCON1_ST (1 << 6) /* start conversion */
-
-# define ADCCON1_STSEL_MASK (3 << 4) /* start select */
-# define ADCCON1_STSEL_EXTERNAL (0 << 4) /* P2_0 pin triggers */
-# define ADCCON1_STSEL_FULLSPEED (1 << 4) /* full speed, no waiting */
-# define ADCCON1_STSEL_TIMER1 (2 << 4) /* timer 1 channel 0 */
-# define ADCCON1_STSEL_START (3 << 4) /* set start bit */
-
-# define ADCCON1_RCTRL_MASK (3 << 2) /* random number control */
-# define ADCCON1_RCTRL_COMPLETE (0 << 2) /* operation completed */
-# define ADCCON1_RCTRL_CLOCK_LFSR (1 << 2) /* Clock the LFSR once */
-
-/* ADC Control Register 2 */
-__sfr __at 0xB5 ADCCON2;
-
-# define ADCCON2_SREF_MASK (3 << 6) /* reference voltage */
-# define ADCCON2_SREF_1_25V (0 << 6) /* internal 1.25V */
-# define ADCCON2_SREF_EXTERNAL (1 << 6) /* external on AIN7 cc1110 */
-# define ADCCON2_SREF_VDD (2 << 6) /* VDD on the AVDD pin */
-# define ADCCON2_SREF_EXTERNAL_DIFF (3 << 6) /* external on AIN6-7 cc1110 */
-
-# define ADCCON2_SDIV_MASK (3 << 4) /* decimation rate */
-# define ADCCON2_SDIV_64 (0 << 4) /* 7 bits */
-# define ADCCON2_SDIV_128 (1 << 4) /* 9 bits */
-# define ADCCON2_SDIV_256 (2 << 4) /* 10 bits */
-# define ADCCON2_SDIV_512 (3 << 4) /* 12 bits */
-
-# define ADCCON2_SCH_MASK (0xf << 0) /* Sequence channel select */
-# define ADCCON2_SCH_SHIFT 0
-# define ADCCON2_SCH_AIN0 (0 << 0)
-# define ADCCON2_SCH_AIN1 (1 << 0)
-# define ADCCON2_SCH_AIN2 (2 << 0)
-# define ADCCON2_SCH_AIN3 (3 << 0)
-# define ADCCON2_SCH_AIN4 (4 << 0)
-# define ADCCON2_SCH_AIN5 (5 << 0)
-# define ADCCON2_SCH_AIN6 (6 << 0)
-# define ADCCON2_SCH_AIN7 (7 << 0)
-# define ADCCON2_SCH_AIN0_AIN1 (8 << 0)
-# define ADCCON2_SCH_AIN2_AIN3 (9 << 0)
-# define ADCCON2_SCH_AIN4_AIN5 (0xa << 0)
-# define ADCCON2_SCH_AIN6_AIN7 (0xb << 0)
-# define ADCCON2_SCH_GND (0xc << 0)
-# define ADCCON2_SCH_VREF (0xd << 0)
-# define ADCCON2_SCH_TEMP (0xe << 0)
-# define ADCCON2_SCH_VDD_3 (0xf << 0)
-
-
-/* ADC Control Register 3 */
-__sfr __at 0xB6 ADCCON3;
-
-# define ADCCON3_EREF_MASK (3 << 6) /* extra conversion reference */
-# define ADCCON3_EREF_1_25 (0 << 6) /* internal 1.25V */
-# define ADCCON3_EREF_EXTERNAL (1 << 6) /* external AIN7 cc1110 */
-# define ADCCON3_EREF_VDD (2 << 6) /* VDD on the AVDD pin */
-# define ADCCON3_EREF_EXTERNAL_DIFF (3 << 6) /* external AIN6-7 cc1110 */
-# define ADCCON3_EDIV_MASK (3 << 4) /* extral decimation */
-# define ADCCON3_EDIV_64 (0 << 4) /* 7 bits */
-# define ADCCON3_EDIV_128 (1 << 4) /* 9 bits */
-# define ADCCON3_EDIV_256 (2 << 4) /* 10 bits */
-# define ADCCON3_EDIV_512 (3 << 4) /* 12 bits */
-# define ADCCON3_ECH_MASK (0xf << 0) /* Sequence channel select */
-# define ADCCON3_ECH_SHIFT 0
-# define ADCCON3_ECH_AIN0 (0 << 0)
-# define ADCCON3_ECH_AIN1 (1 << 0)
-# define ADCCON3_ECH_AIN2 (2 << 0)
-# define ADCCON3_ECH_AIN3 (3 << 0)
-# define ADCCON3_ECH_AIN4 (4 << 0)
-# define ADCCON3_ECH_AIN5 (5 << 0)
-# define ADCCON3_ECH_AIN6 (6 << 0)
-# define ADCCON3_ECH_AIN7 (7 << 0)
-# define ADCCON3_ECH_AIN0_AIN1 (8 << 0)
-# define ADCCON3_ECH_AIN2_AIN3 (9 << 0)
-# define ADCCON3_ECH_AIN4_AIN5 (0xa << 0)
-# define ADCCON3_ECH_AIN6_AIN7 (0xb << 0)
-# define ADCCON3_ECH_GND (0xc << 0)
-# define ADCCON3_ECH_VREF (0xd << 0)
-# define ADCCON3_ECH_TEMP (0xe << 0)
-# define ADCCON3_ECH_VDD_3 (0xf << 0)
-
-/*
- * ADC configuration register, this selects which
- * GPIO pins are to be used as ADC inputs
- */
-__sfr __at 0xF2 ADCCFG;
-
-/*
- * Watchdog timer
- */
-
-__sfr __at 0xc9 WDCTL;
-
-#define WDCTL_CLEAR_FIRST (0xa << 4)
-#define WDCTL_CLEAR_SECOND (0x5 << 4)
-#define WDCTL_EN (1 << 3)
-#define WDCTL_MODE_WATCHDOG (0 << 2)
-#define WDCTL_MODE_TIMER (1 << 2)
-#define WDCTL_MODE_MASK (1 << 2)
-#define WDCTL_INT_32768 (0 << 0)
-#define WDCTL_INT_8192 (1 << 0)
-#define WDCTL_INT_512 (2 << 0)
-#define WDCTL_INT_64 (3 << 0)
-
-/*
- * Pin selectors, these set which pins are
- * using their peripheral function
- */
-__sfr __at 0xF3 P0SEL;
-__sfr __at 0xF4 P1SEL;
-__sfr __at 0xF5 P2SEL;
-
-#define P2SEL_PRI3P1_USART0 (0 << 6)
-#define P2SEL_PRI3P1_USART1 (1 << 6)
-#define P2SEL_PRI3P1_MASK (1 << 6)
-#define P2SEL_PRI2P1_USART1 (0 << 5)
-#define P2SEL_PRI2P1_TIMER3 (1 << 5)
-#define P2SEL_PRI2P1_MASK (1 << 5)
-#define P2SEL_PRI1P1_TIMER1 (0 << 4)
-#define P2SEL_PRI1P1_TIMER4 (1 << 4)
-#define P2SEL_PRI1P1_MASK (1 << 4)
-#define P2SEL_PRI0P1_USART0 (0 << 3)
-#define P2SEL_PRI0P1_TIMER1 (1 << 3)
-#define P2SEL_PRI0P1_MASK (1 << 3)
-#define P2SEL_SELP2_4_GPIO (0 << 2)
-#define P2SEL_SELP2_4_PERIPHERAL (1 << 2)
-#define P2SEL_SELP2_4_MASK (1 << 2)
-#define P2SEL_SELP2_3_GPIO (0 << 1)
-#define P2SEL_SELP2_3_PERIPHERAL (1 << 1)
-#define P2SEL_SELP2_3_MASK (1 << 1)
-#define P2SEL_SELP2_0_GPIO (0 << 0)
-#define P2SEL_SELP2_0_PERIPHERAL (1 << 0)
-#define P2SEL_SELP2_0_MASK (1 << 0)
-
-/*
- * For pins used as GPIOs, these set which are used as outputs
- */
-__sfr __at 0xFD P0DIR;
-__sfr __at 0xFE P1DIR;
-__sfr __at 0xFF P2DIR;
-
-#define P2DIR_PRIP0_USART0_USART1 (0 << 6)
-#define P2DIR_PRIP0_USART1_USART0 (1 << 6)
-#define P2DIR_PRIP0_TIMER1_01_USART1 (2 << 6)
-#define P2DIR_PRIP0_TIMER1_2_USART0 (3 << 6)
-#define P2DIR_PRIP0_MASK (3 << 6)
-
-__sfr __at 0x8F P0INP;
-
-/* Select between tri-state and pull up/down
- * for pins P0_0 - P0_7.
- */
-#define P0INP_MDP0_7_PULL (0 << 7)
-#define P0INP_MDP0_7_TRISTATE (1 << 7)
-#define P0INP_MDP0_6_PULL (0 << 6)
-#define P0INP_MDP0_6_TRISTATE (1 << 6)
-#define P0INP_MDP0_5_PULL (0 << 5)
-#define P0INP_MDP0_5_TRISTATE (1 << 5)
-#define P0INP_MDP0_4_PULL (0 << 4)
-#define P0INP_MDP0_4_TRISTATE (1 << 4)
-#define P0INP_MDP0_3_PULL (0 << 3)
-#define P0INP_MDP0_3_TRISTATE (1 << 3)
-#define P0INP_MDP0_2_PULL (0 << 2)
-#define P0INP_MDP0_2_TRISTATE (1 << 2)
-#define P0INP_MDP0_1_PULL (0 << 1)
-#define P0INP_MDP0_1_TRISTATE (1 << 1)
-#define P0INP_MDP0_0_PULL (0 << 0)
-#define P0INP_MDP0_0_TRISTATE (1 << 0)
-
-__sfr __at 0xF6 P1INP;
-
-/* Select between tri-state and pull up/down
- * for pins P1_2 - P1_7. Pins P1_0 and P1_1 are
- * always tri-stated
- */
-#define P1INP_MDP1_7_PULL (0 << 7)
-#define P1INP_MDP1_7_TRISTATE (1 << 7)
-#define P1INP_MDP1_6_PULL (0 << 6)
-#define P1INP_MDP1_6_TRISTATE (1 << 6)
-#define P1INP_MDP1_5_PULL (0 << 5)
-#define P1INP_MDP1_5_TRISTATE (1 << 5)
-#define P1INP_MDP1_4_PULL (0 << 4)
-#define P1INP_MDP1_4_TRISTATE (1 << 4)
-#define P1INP_MDP1_3_PULL (0 << 3)
-#define P1INP_MDP1_3_TRISTATE (1 << 3)
-#define P1INP_MDP1_2_PULL (0 << 2)
-#define P1INP_MDP1_2_TRISTATE (1 << 2)
-
-__sfr __at 0xF7 P2INP;
-/* P2INP has three extra bits which are used to choose
- * between pull-up and pull-down when they are not tri-stated
- */
-#define P2INP_PDUP2_PULL_UP (0 << 7)
-#define P2INP_PDUP2_PULL_DOWN (1 << 7)
-#define P2INP_PDUP1_PULL_UP (0 << 6)
-#define P2INP_PDUP1_PULL_DOWN (1 << 6)
-#define P2INP_PDUP0_PULL_UP (0 << 5)
-#define P2INP_PDUP0_PULL_DOWN (1 << 5)
-
-/* For the P2 pins, choose between tri-state and pull up/down
- * mode
- */
-#define P2INP_MDP2_4_PULL (0 << 4)
-#define P2INP_MDP2_4_TRISTATE (1 << 4)
-#define P2INP_MDP2_3_PULL (0 << 3)
-#define P2INP_MDP2_3_TRISTATE (1 << 3)
-#define P2INP_MDP2_2_PULL (0 << 2)
-#define P2INP_MDP2_2_TRISTATE (1 << 2)
-#define P2INP_MDP2_1_PULL (0 << 1)
-#define P2INP_MDP2_1_TRISTATE (1 << 1)
-#define P2INP_MDP2_0_PULL (0 << 0)
-#define P2INP_MDP2_0_TRISTATE (1 << 0)
-
-/* GPIO interrupt status flags */
-__sfr __at 0x89 P0IFG;
-__sfr __at 0x8A P1IFG;
-__sfr __at 0x8B P2IFG;
-
-#define P0IFG_USB_RESUME (1 << 7)
-
-__sfr __at 0x8C PICTL;
-#define PICTL_P2IEN (1 << 5)
-#define PICTL_P0IENH (1 << 4)
-#define PICTL_P0IENL (1 << 3)
-#define PICTL_P2ICON (1 << 2)
-#define PICTL_P1ICON (1 << 1)
-#define PICTL_P0ICON (1 << 0)
-
-/* GPIO pins */
-__sfr __at 0x80 P0;
-
-__sbit __at 0x80 P0_0;
-__sbit __at 0x81 P0_1;
-__sbit __at 0x82 P0_2;
-__sbit __at 0x83 P0_3;
-__sbit __at 0x84 P0_4;
-__sbit __at 0x85 P0_5;
-__sbit __at 0x86 P0_6;
-__sbit __at 0x87 P0_7;
-
-__sfr __at 0x90 P1;
-
-__sbit __at 0x90 P1_0;
-__sbit __at 0x91 P1_1;
-__sbit __at 0x92 P1_2;
-__sbit __at 0x93 P1_3;
-__sbit __at 0x94 P1_4;
-__sbit __at 0x95 P1_5;
-__sbit __at 0x96 P1_6;
-__sbit __at 0x97 P1_7;
-
-__sfr __at 0xa0 P2;
-
-__sbit __at 0xa0 P2_0;
-__sbit __at 0xa1 P2_1;
-__sbit __at 0xa2 P2_2;
-__sbit __at 0xa3 P2_3;
-__sbit __at 0xa4 P2_4;
-
-/* DMA controller */
-struct cc_dma_channel {
- uint8_t src_high;
- uint8_t src_low;
- uint8_t dst_high;
- uint8_t dst_low;
- uint8_t len_high;
- uint8_t len_low;
- uint8_t cfg0;
- uint8_t cfg1;
-};
-
-# define DMA_LEN_HIGH_VLEN_MASK (7 << 5)
-# define DMA_LEN_HIGH_VLEN_LEN (0 << 5)
-# define DMA_LEN_HIGH_VLEN_PLUS_1 (1 << 5)
-# define DMA_LEN_HIGH_VLEN (2 << 5)
-# define DMA_LEN_HIGH_VLEN_PLUS_2 (3 << 5)
-# define DMA_LEN_HIGH_VLEN_PLUS_3 (4 << 5)
-# define DMA_LEN_HIGH_MASK (0x1f)
-
-# define DMA_CFG0_WORDSIZE_8 (0 << 7)
-# define DMA_CFG0_WORDSIZE_16 (1 << 7)
-# define DMA_CFG0_TMODE_MASK (3 << 5)
-# define DMA_CFG0_TMODE_SINGLE (0 << 5)
-# define DMA_CFG0_TMODE_BLOCK (1 << 5)
-# define DMA_CFG0_TMODE_REPEATED_SINGLE (2 << 5)
-# define DMA_CFG0_TMODE_REPEATED_BLOCK (3 << 5)
-
-/*
- * DMA triggers
- */
-# define DMA_CFG0_TRIGGER_NONE 0
-# define DMA_CFG0_TRIGGER_PREV 1
-# define DMA_CFG0_TRIGGER_T1_CH0 2
-# define DMA_CFG0_TRIGGER_T1_CH1 3
-# define DMA_CFG0_TRIGGER_T1_CH2 4
-# define DMA_CFG0_TRIGGER_T2_OVFL 6
-# define DMA_CFG0_TRIGGER_T3_CH0 7
-# define DMA_CFG0_TRIGGER_T3_CH1 8
-# define DMA_CFG0_TRIGGER_T4_CH0 9
-# define DMA_CFG0_TRIGGER_T4_CH1 10
-# define DMA_CFG0_TRIGGER_IOC_0 12
-# define DMA_CFG0_TRIGGER_IOC_1 13
-# define DMA_CFG0_TRIGGER_URX0 14
-# define DMA_CFG0_TRIGGER_UTX0 15
-# define DMA_CFG0_TRIGGER_URX1 16
-# define DMA_CFG0_TRIGGER_UTX1 17
-# define DMA_CFG0_TRIGGER_FLASH 18
-# define DMA_CFG0_TRIGGER_RADIO 19
-# define DMA_CFG0_TRIGGER_ADC_CHALL 20
-# define DMA_CFG0_TRIGGER_ADC_CH0 21
-# define DMA_CFG0_TRIGGER_ADC_CH1 22
-# define DMA_CFG0_TRIGGER_ADC_CH2 23
-# define DMA_CFG0_TRIGGER_ADC_CH3 24
-# define DMA_CFG0_TRIGGER_ADC_CH4 25
-# define DMA_CFG0_TRIGGER_ADC_CH5 26
-# define DMA_CFG0_TRIGGER_ADC_CH6 27
-# define DMA_CFG0_TRIGGER_I2SRX 27
-# define DMA_CFG0_TRIGGER_ADC_CH7 28
-# define DMA_CFG0_TRIGGER_I2STX 28
-# define DMA_CFG0_TRIGGER_ENC_DW 29
-# define DMA_CFG0_TRIGGER_ENC_UP 30
-
-# define DMA_CFG1_SRCINC_MASK (3 << 6)
-# define DMA_CFG1_SRCINC_0 (0 << 6)
-# define DMA_CFG1_SRCINC_1 (1 << 6)
-# define DMA_CFG1_SRCINC_2 (2 << 6)
-# define DMA_CFG1_SRCINC_MINUS_1 (3 << 6)
-
-# define DMA_CFG1_DESTINC_MASK (3 << 4)
-# define DMA_CFG1_DESTINC_0 (0 << 4)
-# define DMA_CFG1_DESTINC_1 (1 << 4)
-# define DMA_CFG1_DESTINC_2 (2 << 4)
-# define DMA_CFG1_DESTINC_MINUS_1 (3 << 4)
-
-# define DMA_CFG1_IRQMASK (1 << 3)
-# define DMA_CFG1_M8 (1 << 2)
-
-# define DMA_CFG1_PRIORITY_MASK (3 << 0)
-# define DMA_CFG1_PRIORITY_LOW (0 << 0)
-# define DMA_CFG1_PRIORITY_NORMAL (1 << 0)
-# define DMA_CFG1_PRIORITY_HIGH (2 << 0)
-
-/*
- * DMAARM - DMA Channel Arm
- */
-
-__sfr __at 0xD6 DMAARM;
-
-# define DMAARM_ABORT (1 << 7)
-# define DMAARM_DMAARM4 (1 << 4)
-# define DMAARM_DMAARM3 (1 << 3)
-# define DMAARM_DMAARM2 (1 << 2)
-# define DMAARM_DMAARM1 (1 << 1)
-# define DMAARM_DMAARM0 (1 << 0)
-
-/*
- * DMAREQ - DMA Channel Start Request and Status
- */
-
-__sfr __at 0xD7 DMAREQ;
-
-# define DMAREQ_DMAREQ4 (1 << 4)
-# define DMAREQ_DMAREQ3 (1 << 3)
-# define DMAREQ_DMAREQ2 (1 << 2)
-# define DMAREQ_DMAREQ1 (1 << 1)
-# define DMAREQ_DMAREQ0 (1 << 0)
-
-/*
- * DMA configuration 0 address
- */
-
-__sfr __at 0xD5 DMA0CFGH;
-__sfr __at 0xD4 DMA0CFGL;
-
-/*
- * DMA configuration 1-4 address
- */
-
-__sfr __at 0xD3 DMA1CFGH;
-__sfr __at 0xD2 DMA1CFGL;
-
-/*
- * DMAIRQ - DMA Interrupt Flag
- */
-
-__sfr __at 0xD1 DMAIRQ;
-
-# define DMAIRQ_DMAIF4 (1 << 4)
-# define DMAIRQ_DMAIF3 (1 << 3)
-# define DMAIRQ_DMAIF2 (1 << 2)
-# define DMAIRQ_DMAIF1 (1 << 1)
-# define DMAIRQ_DMAIF0 (1 << 0)
-
-/*
- * UART registers
- */
-
-/* USART config/status registers */
-__sfr __at 0x86 U0CSR;
-__sfr __at 0xF8 U1CSR;
-
-# define UxCSR_MODE_UART (1 << 7)
-# define UxCSR_MODE_SPI (0 << 7)
-# define UxCSR_RE (1 << 6)
-# define UxCSR_SLAVE (1 << 5)
-# define UxCSR_MASTER (0 << 5)
-# define UxCSR_FE (1 << 4)
-# define UxCSR_ERR (1 << 3)
-# define UxCSR_RX_BYTE (1 << 2)
-# define UxCSR_TX_BYTE (1 << 1)
-# define UxCSR_ACTIVE (1 << 0)
-
-/* UART configuration registers */
-__sfr __at 0xc4 U0UCR;
-__sfr __at 0xfb U1UCR;
-
-# define UxUCR_FLUSH (1 << 7)
-# define UxUCR_FLOW_DISABLE (0 << 6)
-# define UxUCR_FLOW_ENABLE (1 << 6)
-# define UxUCR_D9_EVEN_PARITY (0 << 5)
-# define UxUCR_D9_ODD_PARITY (1 << 5)
-# define UxUCR_BIT9_8_BITS (0 << 4)
-# define UxUCR_BIT9_9_BITS (1 << 4)
-# define UxUCR_PARITY_DISABLE (0 << 3)
-# define UxUCR_PARITY_ENABLE (1 << 3)
-# define UxUCR_SPB_1_STOP_BIT (0 << 2)
-# define UxUCR_SPB_2_STOP_BITS (1 << 2)
-# define UxUCR_STOP_LOW (0 << 1)
-# define UxUCR_STOP_HIGH (1 << 1)
-# define UxUCR_START_LOW (0 << 0)
-# define UxUCR_START_HIGH (1 << 0)
-
-/* USART General configuration registers (mostly SPI) */
-__sfr __at 0xc5 U0GCR;
-__sfr __at 0xfc U1GCR;
-
-# define UxGCR_CPOL_NEGATIVE (0 << 7)
-# define UxGCR_CPOL_POSITIVE (1 << 7)
-# define UxGCR_CPHA_FIRST_EDGE (0 << 6)
-# define UxGCR_CPHA_SECOND_EDGE (1 << 6)
-# define UxGCR_ORDER_LSB (0 << 5)
-# define UxGCR_ORDER_MSB (1 << 5)
-# define UxGCR_BAUD_E_MASK (0x1f)
-# define UxGCR_BAUD_E_SHIFT 0
-
-/* USART data registers */
-__sfr __at 0xc1 U0DBUF;
-__xdata __at (0xDFC1) volatile uint8_t U0DBUFXADDR;
-__sfr __at 0xf9 U1DBUF;
-__xdata __at (0xDFF9) volatile uint8_t U1DBUFXADDR;
-
-/* USART baud rate registers, M value */
-__sfr __at 0xc2 U0BAUD;
-__sfr __at 0xfa U1BAUD;
-
-/* Flash controller */
-
-__sfr __at 0xAE FCTL;
-#define FCTL_BUSY (1 << 7)
-#define FCTL_SWBSY (1 << 6)
-#define FCTL_CONTRD_ENABLE (1 << 4)
-#define FCTL_WRITE (1 << 1)
-#define FCTL_ERASE (1 << 0)
-
-/* Flash write data. Write two bytes here */
-__sfr __at 0xAF FWDATA;
-__xdata __at (0xDFAF) volatile uint8_t FWDATAXADDR;
-
-/* Flash write/erase address */
-__sfr __at 0xAD FADDRH;
-__sfr __at 0xAC FADDRL;
-
-/* Flash timing */
-__sfr __at 0xAB FWT;
-
-/* Radio */
-
-__sfr __at 0xD9 RFD;
-__xdata __at (0xDFD9) volatile uint8_t RFDXADDR;
-
-__sfr __at 0xE9 RFIF;
-#define RFIF_IM_TXUNF (1 << 7)
-#define RFIF_IM_RXOVF (1 << 6)
-#define RFIF_IM_TIMEOUT (1 << 5)
-#define RFIF_IM_DONE (1 << 4)
-#define RFIF_IM_CS (1 << 3)
-#define RFIF_IM_PQT (1 << 2)
-#define RFIF_IM_CCA (1 << 1)
-#define RFIF_IM_SFD (1 << 0)
-
-__sfr __at 0x91 RFIM;
-#define RFIM_IM_TXUNF (1 << 7)
-#define RFIM_IM_RXOVF (1 << 6)
-#define RFIM_IM_TIMEOUT (1 << 5)
-#define RFIM_IM_DONE (1 << 4)
-#define RFIM_IM_CS (1 << 3)
-#define RFIM_IM_PQT (1 << 2)
-#define RFIM_IM_CCA (1 << 1)
-#define RFIM_IM_SFD (1 << 0)
-
-__sfr __at 0xE1 RFST;
-
-#define RFST_SFSTXON 0x00
-#define RFST_SCAL 0x01
-#define RFST_SRX 0x02
-#define RFST_STX 0x03
-#define RFST_SIDLE 0x04
-
-__xdata __at (0xdf00) uint8_t RF[0x3c];
-
-__xdata __at (0xdf2f) uint8_t RF_IOCFG2;
-#define RF_IOCFG2_OFF 0x2f
-
-__xdata __at (0xdf30) uint8_t RF_IOCFG1;
-#define RF_IOCFG1_OFF 0x30
-
-__xdata __at (0xdf31) uint8_t RF_IOCFG0;
-#define RF_IOCFG0_OFF 0x31
-
-__xdata __at (0xdf00) uint8_t RF_SYNC1;
-#define RF_SYNC1_OFF 0x00
-
-__xdata __at (0xdf01) uint8_t RF_SYNC0;
-#define RF_SYNC0_OFF 0x01
-
-__xdata __at (0xdf02) uint8_t RF_PKTLEN;
-#define RF_PKTLEN_OFF 0x02
-
-__xdata __at (0xdf03) uint8_t RF_PKTCTRL1;
-#define RF_PKTCTRL1_OFF 0x03
-#define PKTCTRL1_PQT_MASK (0x7 << 5)
-#define PKTCTRL1_PQT_SHIFT 5
-#define PKTCTRL1_APPEND_STATUS (1 << 2)
-#define PKTCTRL1_ADR_CHK_NONE (0 << 0)
-#define PKTCTRL1_ADR_CHK_NO_BROADCAST (1 << 0)
-#define PKTCTRL1_ADR_CHK_00_BROADCAST (2 << 0)
-#define PKTCTRL1_ADR_CHK_00_FF_BROADCAST (3 << 0)
-
-/* If APPEND_STATUS is used, two bytes will be added to the packet data */
-#define PKT_APPEND_STATUS_0_RSSI_MASK (0xff)
-#define PKT_APPEND_STATUS_0_RSSI_SHIFT 0
-#define PKT_APPEND_STATUS_1_CRC_OK (1 << 7)
-#define PKT_APPEND_STATUS_1_LQI_MASK (0x7f)
-#define PKT_APPEND_STATUS_1_LQI_SHIFT 0
-
-__xdata __at (0xdf04) uint8_t RF_PKTCTRL0;
-#define RF_PKTCTRL0_OFF 0x04
-#define RF_PKTCTRL0_WHITE_DATA (1 << 6)
-#define RF_PKTCTRL0_PKT_FORMAT_NORMAL (0 << 4)
-#define RF_PKTCTRL0_PKT_FORMAT_RANDOM (2 << 4)
-#define RF_PKTCTRL0_CRC_EN (1 << 2)
-#define RF_PKTCTRL0_LENGTH_CONFIG_FIXED (0 << 0)
-#define RF_PKTCTRL0_LENGTH_CONFIG_VARIABLE (1 << 0)
-
-__xdata __at (0xdf05) uint8_t RF_ADDR;
-#define RF_ADDR_OFF 0x05
-
-__xdata __at (0xdf06) uint8_t RF_CHANNR;
-#define RF_CHANNR_OFF 0x06
-
-__xdata __at (0xdf07) uint8_t RF_FSCTRL1;
-#define RF_FSCTRL1_OFF 0x07
-
-#define RF_FSCTRL1_FREQ_IF_SHIFT (0)
-
-__xdata __at (0xdf08) uint8_t RF_FSCTRL0;
-#define RF_FSCTRL0_OFF 0x08
-
-#define RF_FSCTRL0_FREQOFF_SHIFT (0)
-
-__xdata __at (0xdf09) uint8_t RF_FREQ2;
-#define RF_FREQ2_OFF 0x09
-
-__xdata __at (0xdf0a) uint8_t RF_FREQ1;
-#define RF_FREQ1_OFF 0x0a
-
-__xdata __at (0xdf0b) uint8_t RF_FREQ0;
-#define RF_FREQ0_OFF 0x0b
-
-__xdata __at (0xdf0c) uint8_t RF_MDMCFG4;
-#define RF_MDMCFG4_OFF 0x0c
-
-#define RF_MDMCFG4_CHANBW_E_SHIFT 6
-#define RF_MDMCFG4_CHANBW_M_SHIFT 4
-#define RF_MDMCFG4_DRATE_E_SHIFT 0
-
-__xdata __at (0xdf0d) uint8_t RF_MDMCFG3;
-#define RF_MDMCFG3_OFF 0x0d
-
-#define RF_MDMCFG3_DRATE_M_SHIFT 0
-
-__xdata __at (0xdf0e) uint8_t RF_MDMCFG2;
-#define RF_MDMCFG2_OFF 0x0e
-
-#define RF_MDMCFG2_DEM_DCFILT_OFF (1 << 7)
-#define RF_MDMCFG2_DEM_DCFILT_ON (0 << 7)
-
-#define RF_MDMCFG2_MOD_FORMAT_MASK (7 << 4)
-#define RF_MDMCFG2_MOD_FORMAT_2_FSK (0 << 4)
-#define RF_MDMCFG2_MOD_FORMAT_GFSK (1 << 4)
-#define RF_MDMCFG2_MOD_FORMAT_ASK_OOK (3 << 4)
-#define RF_MDMCFG2_MOD_FORMAT_MSK (7 << 4)
-
-#define RF_MDMCFG2_MANCHESTER_EN (1 << 3)
-
-#define RF_MDMCFG2_SYNC_MODE_MASK (0x7 << 0)
-#define RF_MDMCFG2_SYNC_MODE_NONE (0x0 << 0)
-#define RF_MDMCFG2_SYNC_MODE_15_16 (0x1 << 0)
-#define RF_MDMCFG2_SYNC_MODE_16_16 (0x2 << 0)
-#define RF_MDMCFG2_SYNC_MODE_30_32 (0x3 << 0)
-#define RF_MDMCFG2_SYNC_MODE_NONE_THRES (0x4 << 0)
-#define RF_MDMCFG2_SYNC_MODE_15_16_THRES (0x5 << 0)
-#define RF_MDMCFG2_SYNC_MODE_16_16_THRES (0x6 << 0)
-#define RF_MDMCFG2_SYNC_MODE_30_32_THRES (0x7 << 0)
-
-__xdata __at (0xdf0f) uint8_t RF_MDMCFG1;
-#define RF_MDMCFG1_OFF 0x0f
-
-#define RF_MDMCFG1_FEC_EN (1 << 7)
-#define RF_MDMCFG1_FEC_DIS (0 << 7)
-
-#define RF_MDMCFG1_NUM_PREAMBLE_MASK (7 << 4)
-#define RF_MDMCFG1_NUM_PREAMBLE_2 (0 << 4)
-#define RF_MDMCFG1_NUM_PREAMBLE_3 (1 << 4)
-#define RF_MDMCFG1_NUM_PREAMBLE_4 (2 << 4)
-#define RF_MDMCFG1_NUM_PREAMBLE_6 (3 << 4)
-#define RF_MDMCFG1_NUM_PREAMBLE_8 (4 << 4)
-#define RF_MDMCFG1_NUM_PREAMBLE_12 (5 << 4)
-#define RF_MDMCFG1_NUM_PREAMBLE_16 (6 << 4)
-#define RF_MDMCFG1_NUM_PREAMBLE_24 (7 << 4)
-
-#define RF_MDMCFG1_CHANSPC_E_MASK (3 << 0)
-#define RF_MDMCFG1_CHANSPC_E_SHIFT (0)
-
-__xdata __at (0xdf10) uint8_t RF_MDMCFG0;
-#define RF_MDMCFG0_OFF 0x10
-
-#define RF_MDMCFG0_CHANSPC_M_SHIFT (0)
-
-__xdata __at (0xdf11) uint8_t RF_DEVIATN;
-#define RF_DEVIATN_OFF 0x11
-
-#define RF_DEVIATN_DEVIATION_E_SHIFT 4
-#define RF_DEVIATN_DEVIATION_M_SHIFT 0
-
-__xdata __at (0xdf12) uint8_t RF_MCSM2;
-#define RF_MCSM2_OFF 0x12
-#define RF_MCSM2_RX_TIME_RSSI (1 << 4)
-#define RF_MCSM2_RX_TIME_QUAL (1 << 3)
-#define RF_MCSM2_RX_TIME_MASK (0x7)
-#define RF_MCSM2_RX_TIME_SHIFT 0
-#define RF_MCSM2_RX_TIME_END_OF_PACKET (7)
-
-__xdata __at (0xdf13) uint8_t RF_MCSM1;
-#define RF_MCSM1_OFF 0x13
-#define RF_MCSM1_CCA_MODE_ALWAYS (0 << 4)
-#define RF_MCSM1_CCA_MODE_RSSI_BELOW (1 << 4)
-#define RF_MCSM1_CCA_MODE_UNLESS_RECEIVING (2 << 4)
-#define RF_MCSM1_CCA_MODE_RSSI_BELOW_UNLESS_RECEIVING (3 << 4)
-#define RF_MCSM1_RXOFF_MODE_IDLE (0 << 2)
-#define RF_MCSM1_RXOFF_MODE_FSTXON (1 << 2)
-#define RF_MCSM1_RXOFF_MODE_TX (2 << 2)
-#define RF_MCSM1_RXOFF_MODE_RX (3 << 2)
-#define RF_MCSM1_TXOFF_MODE_IDLE (0 << 0)
-#define RF_MCSM1_TXOFF_MODE_FSTXON (1 << 0)
-#define RF_MCSM1_TXOFF_MODE_TX (2 << 0)
-#define RF_MCSM1_TXOFF_MODE_RX (3 << 0)
-
-__xdata __at (0xdf14) uint8_t RF_MCSM0;
-#define RF_MCSM0_OFF 0x14
-#define RF_MCSM0_FS_AUTOCAL_NEVER (0 << 4)
-#define RF_MCSM0_FS_AUTOCAL_FROM_IDLE (1 << 4)
-#define RF_MCSM0_FS_AUTOCAL_TO_IDLE (2 << 4)
-#define RF_MCSM0_FS_AUTOCAL_TO_IDLE_EVERY_4 (3 << 4)
-#define RF_MCSM0_MAGIC_3 (1 << 3)
-#define RF_MCSM0_MAGIC_2 (1 << 2)
-#define RF_MCSM0_CLOSE_IN_RX_0DB (0 << 0)
-#define RF_MCSM0_CLOSE_IN_RX_6DB (1 << 0)
-#define RF_MCSM0_CLOSE_IN_RX_12DB (2 << 0)
-#define RF_MCSM0_CLOSE_IN_RX_18DB (3 << 0)
-
-__xdata __at (0xdf15) uint8_t RF_FOCCFG;
-#define RF_FOCCFG_OFF 0x15
-#define RF_FOCCFG_FOC_BS_CS_GATE (1 << 5)
-#define RF_FOCCFG_FOC_PRE_K_1K (0 << 3)
-#define RF_FOCCFG_FOC_PRE_K_2K (1 << 3)
-#define RF_FOCCFG_FOC_PRE_K_3K (2 << 3)
-#define RF_FOCCFG_FOC_PRE_K_4K (3 << 3)
-#define RF_FOCCFG_FOC_POST_K_PRE_K (0 << 2)
-#define RF_FOCCFG_FOC_POST_K_PRE_K_OVER_2 (1 << 2)
-#define RF_FOCCFG_FOC_LIMIT_0 (0 << 0)
-#define RF_FOCCFG_FOC_LIMIT_BW_OVER_8 (1 << 0)
-#define RF_FOCCFG_FOC_LIMIT_BW_OVER_4 (2 << 0)
-#define RF_FOCCFG_FOC_LIMIT_BW_OVER_2 (3 << 0)
-
-__xdata __at (0xdf16) uint8_t RF_BSCFG;
-#define RF_BSCFG_OFF 0x16
-#define RF_BSCFG_BS_PRE_K_1K (0 << 6)
-#define RF_BSCFG_BS_PRE_K_2K (1 << 6)
-#define RF_BSCFG_BS_PRE_K_3K (2 << 6)
-#define RF_BSCFG_BS_PRE_K_4K (3 << 6)
-#define RF_BSCFG_BS_PRE_KP_1KP (0 << 4)
-#define RF_BSCFG_BS_PRE_KP_2KP (1 << 4)
-#define RF_BSCFG_BS_PRE_KP_3KP (2 << 4)
-#define RF_BSCFG_BS_PRE_KP_4KP (3 << 4)
-#define RF_BSCFG_BS_POST_KI_PRE_KI (0 << 3)
-#define RF_BSCFG_BS_POST_KI_PRE_KI_OVER_2 (1 << 3)
-#define RF_BSCFG_BS_POST_KP_PRE_KP (0 << 2)
-#define RF_BSCFG_BS_POST_KP_PRE_KP_OVER_2 (1 << 2)
-#define RF_BSCFG_BS_LIMIT_0 (0 << 0)
-#define RF_BSCFG_BS_LIMIT_3_125 (1 << 0)
-#define RF_BSCFG_BS_LIMIT_6_25 (2 << 0)
-#define RF_BSCFG_BS_LIMIT_12_5 (3 << 0)
-
-__xdata __at (0xdf17) uint8_t RF_AGCCTRL2;
-#define RF_AGCCTRL2_OFF 0x17
-
-#define RF_AGCCTRL2_MAX_DVGA_GAIN_ALL (0 << 6)
-#define RF_AGCCTRL2_MAX_DVGA_GAIN_BUT_1 (1 << 6)
-#define RF_AGCCTRL2_MAX_DVGA_GAIN_BUT_2 (2 << 6)
-#define RF_AGCCTRL2_MAX_DVGA_GAIN_BUT_3 (3 << 6)
-#define RF_AGCCTRL2_MAX_LNA_GAIN_0 (0 << 3)
-#define RF_AGCCTRL2_MAX_LNA_GAIN_2_6 (1 << 3)
-#define RF_AGCCTRL2_MAX_LNA_GAIN_6_1 (2 << 3)
-#define RF_AGCCTRL2_MAX_LNA_GAIN_7_4 (3 << 3)
-#define RF_AGCCTRL2_MAX_LNA_GAIN_9_2 (4 << 3)
-#define RF_AGCCTRL2_MAX_LNA_GAIN_11_5 (5 << 3)
-#define RF_AGCCTRL2_MAX_LNA_GAIN_14_6 (6 << 3)
-#define RF_AGCCTRL2_MAX_LNA_GAIN_17_1 (7 << 3)
-#define RF_AGCCTRL2_MAGN_TARGET_24dB (0 << 0)
-#define RF_AGCCTRL2_MAGN_TARGET_27dB (1 << 0)
-#define RF_AGCCTRL2_MAGN_TARGET_30dB (2 << 0)
-#define RF_AGCCTRL2_MAGN_TARGET_33dB (3 << 0)
-#define RF_AGCCTRL2_MAGN_TARGET_36dB (4 << 0)
-#define RF_AGCCTRL2_MAGN_TARGET_38dB (5 << 0)
-#define RF_AGCCTRL2_MAGN_TARGET_40dB (6 << 0)
-#define RF_AGCCTRL2_MAGN_TARGET_42dB (7 << 0)
-
-__xdata __at (0xdf18) uint8_t RF_AGCCTRL1;
-#define RF_AGCCTRL1_OFF 0x18
-
-#define RF_AGCCTRL1_AGC_LNA_PRIORITY_0 (0 << 6)
-#define RF_AGCCTRL1_AGC_LNA_PRIORITY_1 (1 << 6)
-#define RF_AGCCTRL1_CARRIER_SENSE_REL_THR_DISABLE (0 << 4)
-#define RF_AGCCTRL1_CARRIER_SENSE_REL_THR_6DB (1 << 4)
-#define RF_AGCCTRL1_CARRIER_SENSE_REL_THR_10DB (2 << 4)
-#define RF_AGCCTRL1_CARRIER_SENSE_REL_THR_14DB (3 << 4)
-#define RF_AGCCTRL1_CARRIER_SENSE_ABS_THR_DISABLE (0x8 << 0)
-#define RF_AGCCTRL1_CARRIER_SENSE_ABS_THR_7DB_BELOW (0x9 << 0)
-#define RF_AGCCTRL1_CARRIER_SENSE_ABS_THR_6DB_BELOW (0xa << 0)
-#define RF_AGCCTRL1_CARRIER_SENSE_ABS_THR_5DB_BELOW (0xb << 0)
-#define RF_AGCCTRL1_CARRIER_SENSE_ABS_THR_4DB_BELOW (0xc << 0)
-#define RF_AGCCTRL1_CARRIER_SENSE_ABS_THR_3DB_BELOW (0xd << 0)
-#define RF_AGCCTRL1_CARRIER_SENSE_ABS_THR_2DB_BELOW (0xe << 0)
-#define RF_AGCCTRL1_CARRIER_SENSE_ABS_THR_1DB_BELOW (0xf << 0)
-#define RF_AGCCTRL1_CARRIER_SENSE_ABS_THR_0DB (0x0 << 0)
-#define RF_AGCCTRL1_CARRIER_SENSE_ABS_THR_1DB_ABOVE (0x1 << 0)
-#define RF_AGCCTRL1_CARRIER_SENSE_ABS_THR_2DB_ABOVE (0x2 << 0)
-#define RF_AGCCTRL1_CARRIER_SENSE_ABS_THR_3DB_ABOVE (0x3 << 0)
-#define RF_AGCCTRL1_CARRIER_SENSE_ABS_THR_4DB_ABOVE (0x4 << 0)
-#define RF_AGCCTRL1_CARRIER_SENSE_ABS_THR_5DB_ABOVE (0x5 << 0)
-#define RF_AGCCTRL1_CARRIER_SENSE_ABS_THR_6DB_ABOVE (0x6 << 0)
-#define RF_AGCCTRL1_CARRIER_SENSE_ABS_THR_7DB_ABOVE (0x7 << 0)
-
-__xdata __at (0xdf19) uint8_t RF_AGCCTRL0;
-#define RF_AGCCTRL0_OFF 0x19
-
-#define RF_AGCCTRL0_HYST_LEVEL_NONE (0 << 6)
-#define RF_AGCCTRL0_HYST_LEVEL_LOW (1 << 6)
-#define RF_AGCCTRL0_HYST_LEVEL_MEDIUM (2 << 6)
-#define RF_AGCCTRL0_HYST_LEVEL_HIGH (3 << 6)
-#define RF_AGCCTRL0_WAIT_TIME_8 (0 << 4)
-#define RF_AGCCTRL0_WAIT_TIME_16 (1 << 4)
-#define RF_AGCCTRL0_WAIT_TIME_24 (2 << 4)
-#define RF_AGCCTRL0_WAIT_TIME_32 (3 << 4)
-#define RF_AGCCTRL0_AGC_FREEZE_NORMAL (0 << 2)
-#define RF_AGCCTRL0_AGC_FREEZE_SYNC (1 << 2)
-#define RF_AGCCTRL0_AGC_FREEZE_MANUAL_ANALOG (2 << 2)
-#define RF_AGCCTRL0_AGC_FREEZE_MANUAL_BOTH (3 << 2)
-#define RF_AGCCTRL0_FILTER_LENGTH_8 (0 << 0)
-#define RF_AGCCTRL0_FILTER_LENGTH_16 (1 << 0)
-#define RF_AGCCTRL0_FILTER_LENGTH_32 (2 << 0)
-#define RF_AGCCTRL0_FILTER_LENGTH_64 (3 << 0)
-
-__xdata __at (0xdf1a) uint8_t RF_FREND1;
-#define RF_FREND1_OFF 0x1a
-
-#define RF_FREND1_LNA_CURRENT_SHIFT 6
-#define RF_FREND1_LNA2MIX_CURRENT_SHIFT 4
-#define RF_FREND1_LODIV_BUF_CURRENT_RX_SHIFT 2
-#define RF_FREND1_MIX_CURRENT_SHIFT 0
-
-__xdata __at (0xdf1b) uint8_t RF_FREND0;
-#define RF_FREND0_OFF 0x1b
-
-#define RF_FREND0_LODIV_BUF_CURRENT_TX_MASK (0x3 << 4)
-#define RF_FREND0_LODIV_BUF_CURRENT_TX_SHIFT 4
-#define RF_FREND0_PA_POWER_MASK (0x7)
-#define RF_FREND0_PA_POWER_SHIFT 0
-
-__xdata __at (0xdf1c) uint8_t RF_FSCAL3;
-#define RF_FSCAL3_OFF 0x1c
-
-__xdata __at (0xdf1d) uint8_t RF_FSCAL2;
-#define RF_FSCAL2_OFF 0x1d
-
-__xdata __at (0xdf1e) uint8_t RF_FSCAL1;
-#define RF_FSCAL1_OFF 0x1e
-
-__xdata __at (0xdf1f) uint8_t RF_FSCAL0;
-#define RF_FSCAL0_OFF 0x1f
-
-__xdata __at (0xdf23) uint8_t RF_TEST2;
-#define RF_TEST2_OFF 0x23
-
-#define RF_TEST2_NORMAL_MAGIC 0x88
-#define RF_TEST2_RX_LOW_DATA_RATE_MAGIC 0x81
-
-__xdata __at (0xdf24) uint8_t RF_TEST1;
-#define RF_TEST1_OFF 0x24
-
-#define RF_TEST1_TX_MAGIC 0x31
-#define RF_TEST1_RX_LOW_DATA_RATE_MAGIC 0x35
-
-__xdata __at (0xdf25) uint8_t RF_TEST0;
-#define RF_TEST0_OFF 0x25
-
-#define RF_TEST0_7_2_MASK (0xfc)
-#define RF_TEST0_VCO_SEL_CAL_EN (1 << 1)
-#define RF_TEST0_0_MASK (1)
-
-/* These are undocumented, and must be computed
- * using the provided tool.
- */
-__xdata __at (0xdf27) uint8_t RF_PA_TABLE7;
-#define RF_PA_TABLE7_OFF 0x27
-
-__xdata __at (0xdf28) uint8_t RF_PA_TABLE6;
-#define RF_PA_TABLE6_OFF 0x28
-
-__xdata __at (0xdf29) uint8_t RF_PA_TABLE5;
-#define RF_PA_TABLE5_OFF 0x29
-
-__xdata __at (0xdf2a) uint8_t RF_PA_TABLE4;
-#define RF_PA_TABLE4_OFF 0x2a
-
-__xdata __at (0xdf2b) uint8_t RF_PA_TABLE3;
-#define RF_PA_TABLE3_OFF 0x2b
-
-__xdata __at (0xdf2c) uint8_t RF_PA_TABLE2;
-#define RF_PA_TABLE2_OFF 0x2c
-
-__xdata __at (0xdf2d) uint8_t RF_PA_TABLE1;
-#define RF_PA_TABLE1_OFF 0x2d
-
-__xdata __at (0xdf2e) uint8_t RF_PA_TABLE0;
-#define RF_PA_TABLE0_OFF 0x2e
-
-__xdata __at (0xdf36) uint8_t RF_PARTNUM;
-#define RF_PARTNUM_OFF 0x36
-
-__xdata __at (0xdf37) uint8_t RF_VERSION;
-#define RF_VERSION_OFF 0x37
-
-__xdata __at (0xdf38) uint8_t RF_FREQEST;
-#define RF_FREQEST_OFF 0x38
-
-__xdata __at (0xdf39) uint8_t RF_LQI;
-#define RF_LQI_OFF 0x39
-
-#define RF_LQI_CRC_OK (1 << 7)
-#define RF_LQI_LQI_EST_MASK (0x7f)
-
-__xdata __at (0xdf3a) uint8_t RF_RSSI;
-#define RF_RSSI_OFF 0x3a
-
-__xdata __at (0xdf3b) uint8_t RF_MARCSTATE;
-#define RF_MARCSTATE_OFF 0x3b
-
-#define RF_MARCSTATE_MASK 0x1f
-#define RF_MARCSTATE_SLEEP 0x00
-#define RF_MARCSTATE_IDLE 0x01
-#define RF_MARCSTATE_VCOON_MC 0x03
-#define RF_MARCSTATE_REGON_MC 0x04
-#define RF_MARCSTATE_MANCAL 0x05
-#define RF_MARCSTATE_VCOON 0x06
-#define RF_MARCSTATE_REGON 0x07
-#define RF_MARCSTATE_STARTCAL 0x08
-#define RF_MARCSTATE_BWBOOST 0x09
-#define RF_MARCSTATE_FS_LOCK 0x0a
-#define RF_MARCSTATE_IFADCON 0x0b
-#define RF_MARCSTATE_ENDCAL 0x0c
-#define RF_MARCSTATE_RX 0x0d
-#define RF_MARCSTATE_RX_END 0x0e
-#define RF_MARCSTATE_RX_RST 0x0f
-#define RF_MARCSTATE_TXRX_SWITCH 0x10
-#define RF_MARCSTATE_RX_OVERFLOW 0x11
-#define RF_MARCSTATE_FSTXON 0x12
-#define RF_MARCSTATE_TX 0x13
-#define RF_MARCSTATE_TX_END 0x14
-#define RF_MARCSTATE_RXTX_SWITCH 0x15
-#define RF_MARCSTATE_TX_UNDERFLOW 0x16
-
-
-__xdata __at (0xdf3c) uint8_t RF_PKTSTATUS;
-#define RF_PKTSTATUS_OFF 0x3c
-
-#define RF_PKTSTATUS_CRC_OK (1 << 7)
-#define RF_PKTSTATUS_CS (1 << 6)
-#define RF_PKTSTATUS_PQT_REACHED (1 << 5)
-#define RF_PKTSTATUS_CCA (1 << 4)
-#define RF_PKTSTATUS_SFD (1 << 3)
-
-__xdata __at (0xdf3d) uint8_t RF_VCO_VC_DAC;
-#define RF_VCO_VC_DAC_OFF 0x3d
-
-/* AES engine */
-
-__sfr __at 0xB1 ENCDI;
-__sfr __at 0xB2 ENCDO;
-__xdata __at (0xDFB1) volatile uint8_t ENCDIXADDR;
-__xdata __at (0xDFB2) volatile uint8_t ENCDOXADDR;
-
-__sfr __at 0xB3 ENCCCS;
-
-#define ENCCCS_MODE_CBC (0 << 4)
-#define ENCCCS_MODE_CFB (1 << 4)
-#define ENCCCS_MODE_OFB (2 << 4)
-#define ENCCCS_MODE_CTR (3 << 4)
-#define ENCCCS_MODE_ECB (4 << 4)
-#define ENCCCS_MODE_CBC_MAC (5 << 4)
-#define ENCCCS_RDY (1 << 3)
-#define ENCCCS_CMD_ENCRYPT (0 << 1)
-#define ENCCCS_CMD_DECRYPT (1 << 1)
-#define ENCCCS_CMD_LOAD_KEY (2 << 1)
-#define ENCCCS_CMD_LOAD_IV (3 << 1)
-#define ENCCCS_START (1 << 0)
-
-#endif
projects / fw / altos / blobdiff