Break out common pieces from TeleGPS and AltusMetrum

[fw/altos] / doc / installation.inc

diff --git a/doc/installation.inc b/doc/installation.inc
index 444332981d1001b0e61c54e7e5e987adfbf0552a..32d819845319c8351d65543537ec55a748feef6d 100644 (file)
--- a/doc/installation.inc
+++ b/doc/installation.inc
@@ -22,13 +22,14 @@
        Check polarity and voltage before connecting any battery not
        purchased from Altus Metrum or Spark Fun.
 
-       By default, we use the unregulated output of the battery directly
-       to fire ejection charges.  This works marvelously with standard
-       low-current e-matches like the J-Tek from MJG Technologies, and with
-       Quest Q2G2 igniters.  However, if you want or need to use a separate
-       pyro battery, check out the “External Pyro Battery” section in this
-       manual for instructions on how to wire that up. The altimeters are
-       designed to work with an external pyro battery of no more than 15 volts.
+       By default, we use the unregulated output of the battery
+       directly to fire ejection charges.  This works marvelously
+       with standard low-current e-matches like the J-Tek from MJG
+       Technologies, and with Quest Q2G2 igniters.  However, if you
+       want or need to use a separate pyro battery, check out
+       <<_using_a_separate_pyro_battery>> for instructions on how to wire
+       that up. The altimeters are designed to work with an external
+       pyro battery of no more than 15 volts.
 
        Ejection charges are wired directly to the screw terminal block
        at the aft end of the altimeter.  You'll need a very small straight