--- /dev/null
+gnuradio (3.1.0svn) UNRELEASED; urgency=low
+
+ * fix build failure with gcc-4.3 by adding a #include, closes: #420896
+ * update copyright assertion on the debian/ contents, since I have
+ assigned my copyright to the FSF and now have upstream commit rights
+ * merge debian/ into upstream SVN repository
+ * add --disable-gr-qtgui (at least until we figure out qwt build deps!)
+ * add build dep on python-numpy
+ * conditionalize configure and clean targets to handle build from SVN
+
+ -- Bdale Garbee <bdale@gag.com> Thu, 26 Jul 2007 18:07:52 -0600
+
+gnuradio (3.0.3-1) unstable; urgency=low
+
+ * new upstream version
+ * tweak gnuradio-doc package to eliminate spurious subdirectory level
+ * add a usrp-doc binary package, recommended by the usrp package, and
+ include xmlto in build dependencies so usrp_guide.html gets generated,
+ closes: #407368
+
+ -- Bdale Garbee <bdale@gag.com> Sun, 11 Mar 2007 23:55:32 -0600
+
+gnuradio (3.0.2-2) unstable; urgency=high
+
+ * add run-time dependency on python-wxgtk2.6. leaving urgency high since
+ this would be a silly bug to release etch with if we can avoid it.
+
+ -- Bdale Garbee <bdale@gag.com> Mon, 4 Dec 2006 15:35:53 -0700
+
+gnuradio (3.0.2-1) unstable; urgency=high
+
+ * new upstream version, fixes FTBFS issues
+
+ -- Bdale Garbee <bdale@gag.com> Sun, 12 Nov 2006 14:52:33 -0800
+
+gnuradio (3.0-3) unstable; urgency=high
+
+ * put python-all-dev back in the build-depends list, closes: #398246
+ * move gr-wxgui conflicts/depends to python-gnuradio, closes: #396302
+ * fix up sections in control to match overrides
+
+ -- Bdale Garbee <bdale@gag.com> Sun, 12 Nov 2006 10:59:58 -0800
+
+gnuradio (3.0-2) unstable; urgency=high
+
+ * reworked package dependencies so that the 'gnuradio' binary package no
+ longer depends on the pieces in contrib. instead, the 'usrp' binary
+ package in contrib now depends on all the USRP-related pieces. A user
+ who doesn't have a USRP board can just install 'gnuradio' and get all
+ the relevant pieces, a USRP user needs to install both 'gnuradio' and
+ 'usrp'. Closes: #394533
+ * improve consistency of references to 'GNU Radio' as upstream project name
+ * make the gnuradio package dependencies on python-gnuradio and python-usrp
+ be version specific on suggestion from Ramakrishnan Muthukrishnan
+
+ -- Bdale Garbee <bdale@gag.com> Fri, 10 Nov 2006 00:39:38 -0800
+
+gnuradio (3.0-1) unstable; urgency=low
+
+ * new maintainer, new upstream version
+ * Restructuring source and binary packages to follow upstream changes, more
+ or less repackaging from scratch taking ideas from the previous packaging
+ by Ramakrishnan Muthukrishnan and Steinar H. Gunderson. This single
+ source package replaces all of:
+ gnuradio-core
+ gnuradio-examples
+ gr-audio-alsa
+ gr-audio-jack
+ gr-audio-oss
+ gr-usrp
+ gr-wxgui
+ usrp
+ In addition, the 'gnuradio' binary package is a new meta-package that
+ conveniently depends on everything gnuradio related to ease installation.
+
+ -- Bdale Garbee <bdale@gag.com> Sun, 8 Oct 2006 13:28:21 -0600
+
--- /dev/null
+Source: gnuradio
+Section: comm
+Priority: optional
+Maintainer: Bdale Garbee <bdale@gag.com>
+Build-Conflicts: automake1.8, automake1.9
+Build-Depends: debhelper (>= 5.0.37.2), autotools-dev, doxygen, fftw3-dev, libasound2-dev, libboost-dev, libcppunit-dev, libjack0.100.0-dev, libsdl1.2-dev, portaudio19-dev, libtool, libusb-dev, pkg-config, python, python-all-dev, python-central (>= 0.5), python-numeric, python-numpy, python-wxgtk2.6, sdcc, swig, xmlto
+Build-Depends-Indep: python-all-dev
+Standards-Version: 3.7.2
+XS-Python-Version: >= 2.3
+
+Package: gnuradio
+Architecture: any
+Section: comm
+Depends: ${shlibs:Depends}, ${misc:Depends}, python, gnuradio-doc, libgnuradio-core0-dev, libgnuradio-core0c2a, libgnuradio-core0c2a-dbg, python-gnuradio (= ${Source-Version}), python-wxgtk2.6, gnuradio-examples
+Suggests: usrp
+Conflicts: gr-audio-alsa, gr-audio-oss, gr-audio-jack
+Replaces: gr-audio-alsa, gr-audio-oss, gr-audio-jack
+XB-Python-Version: ${python:Versions}
+Description: Software Defined Radio
+ This is a meta-package that depends on the various components of a complete
+ installation of the GNU Radio softare defined radio system.
+ .
+ If you have a USRP, you probably also want to install the usrp package as
+ suggested, which lives in contrib because the FPGA bitstrings require
+ non-free tools to build.
+
+Package: gnuradio-doc
+Section: doc
+Architecture: all
+Depends: ${shlibs:Depends}
+Description: Software Defined Radio
+ This package contains the documentation for the GNU Radio software
+ defined radio system.
+
+Package: libgnuradio-core0-dev
+Section: libdevel
+Architecture: any
+Depends: libgnuradio-core0c2a (= ${Source-Version})
+Description: Software Defined Radio
+ This library contains Signal Processing routines that implement
+ the functionality of traditional radio receivers and transmitters.
+ .
+ The GNU Radio homepage is http://www.gnu.org/software/gnuradio
+ .
+ This package contains header files needed by developers.
+
+Package: libgnuradio-core0c2a
+Section: libs
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Conflicts: libgnuradio-core0, libgnuradio-core0c2
+Replaces: libgnuradio-core0, libgnuradio-core0c2
+Recommends: python-gnuradio
+Suggests: gnuradio-doc, gnuradio-examples
+Description: Software Defined Radio
+ This package contains the core GNU Radio libraries.
+
+Package: libgnuradio-core0c2a-dbg
+Section: libdevel
+Architecture: any
+Depends: libgnuradio-core0c2a (= ${Source-Version}), ${shlibs:Depends}
+Description: Software Defined Radio
+ This package contains the debug symbols needed to debug programs that
+ use the GNU Radio core libraries.
+
+Package: usrp
+Section: contrib/comm
+Architecture: any
+Depends: ${shlibs:Depends}, python, libusrp0-dev, libusrp0c2a-dbg, python-usrp (= ${Source-Version})
+Recommends: gnuradio, hotplug, usrp-doc, usrp-firmware
+XB-Python-Version: ${python:Versions}
+Description: control applications and firmware for the USRP
+ The Universal Software Radio Peripheral (USRP) is an USB-connected,
+ low-cost and open board. It features four high-speed analog-to-digital
+ and digital-to-analog converters, an FPGA and a microcontroller. It's
+ ideal for capturing or transmitting various signals, usually in
+ combination with GNU Radio. The design schemas are available under a
+ free license. Visit ettus.com for more information on the USRP.
+ .
+ This package contains a tool for loading firmware and doing other
+ simple administrative tasks for the USRP (usrper), as well as the
+ actual firmware binaries for the microcontroller.
+ .
+ This package also depends on all of the other USRP-related packages
+ so that installing this package will pull in all the pieces you might
+ want or need to successfully use the USRP with GNU Radio.
+
+Package: usrp-doc
+Section: doc
+Architecture: all
+Depends: ${shlibs:Depends}
+Description: Software Defined Radio with USRP
+ This package contains the documentation for the USRP support that is
+ part of the GNU Radio software defined radio system.
+
+Package: usrp-firmware
+Section: contrib/comm
+Architecture: all
+Recommends: usrp
+Description: control applications and firmware for the USRP
+ The Universal Software Radio Peripheral (USRP) is an USB-connected,
+ low-cost and open board. It features four high-speed analog-to-digital
+ and digital-to-analog converters, an FPGA and a microcontroller. It's
+ ideal for capturing or transmitting various signals, usually in
+ combination with GNU Radio. The design schemas are available under a
+ free license.
+ .
+ This package contains the basic FPGA bitstrings for normal USRP operation,
+ which need non-free tools to build.
+
+Package: libusrp0-dev
+Provides: libusrp-dev
+Conflicts: libusrp-dev
+Section: contrib/libdevel
+Architecture: any
+Depends: libusrp0c2a (= ${Source-Version}), ${shlibs:Depends}
+Description: development library files for the USRP
+ The Universal Software Radio Peripheral (USRP) is an USB-connected,
+ low-cost and open board. It features four high-speed analog-to-digital
+ and digital-to-analog converters, an FPGA and a microcontroller. It's
+ ideal for capturing or transmitting various signals, usually in
+ combination with GNU Radio. The design schemas are available under a
+ free license.
+ .
+ This package contains development files for the client-side library.
+
+Package: libusrp0c2a
+Section: contrib/libs
+Architecture: any
+Depends: ${shlibs:Depends}
+Recommends: usrp
+Conflicts: libusrp0
+Replaces: libusrp0
+Description: client side library for the USRP
+ The Universal Software Radio Peripheral (USRP) is an USB-connected,
+ low-cost and open board. It features four high-speed analog-to-digital
+ and digital-to-analog converters, an FPGA and a microcontroller. It's
+ ideal for capturing or transmitting various signals, usually in
+ combination with GNU Radio. The design schemas are available under a
+ free license.
+ .
+ This package contains the client-side library, providing an easy interface
+ for communicating with the USRP.
+
+Package: libusrp0c2a-dbg
+Priority: extra
+Section: contrib/libdevel
+Architecture: any
+Depends: libusrp0c2a (= ${Source-Version}), ${shlibs:Depends}
+Description: client side library debugging symbols for the USRP
+ The Universal Software Radio Peripheral (USRP) is an USB-connected,
+ low-cost and open board. It features four high-speed analog-to-digital
+ and digital-to-analog converters, an FPGA and a microcontroller. It's
+ ideal for capturing or transmitting various signals, usually in
+ combination with GNU Radio. The design schemas are available under a
+ free license.
+ .
+ This package contains the debug symbols needed to debug programs that
+ use the USRP client-side library.
+
+Package: python-gnuradio
+Architecture: any
+Depends: ${python:Depends}, libgnuradio-core0c2a, python-numeric
+Conflicts: gr-wxgui
+Replaces: gr-wxgui
+Provides: ${python:Provides}
+Section: python
+XB-Python-Version: ${python:Versions}
+Description: Python bindings for GNU Radio
+ This provides the module that enable one to use gnuradio from Python
+ scripts. You will need Python and gnuradio-dev installed to use this.
+
+Package: python-usrp
+Section: contrib/libs
+Architecture: any
+Depends: ${shlibs:Depends}, ${python:Depends}
+Replaces: python2.3-usrp
+Conflicts: python2.3-usrp
+Provides: ${python:Provides}
+XB-Python-Version: ${python:Versions}
+Description: Python binding for the USRP client side library
+ The Universal Software Radio Peripheral (USRP) is an USB-connected,
+ low-cost and open board. It features four high-speed analog-to-digital
+ and digital-to-analog converters, an FPGA and a microcontroller. It's
+ ideal for capturing or transmitting various signals, usually in
+ combination with GNU Radio. The design schemas are available under a
+ free license.
+ .
+ This package contains the Python bindings for the client-side library.
+
+Package: gnuradio-examples
+Architecture: all
+Depends: ${python:Depends}, libgnuradio-core0c2a, python-gnuradio
+XB-Python-Version: ${python:Versions}
+Description: Example programs to test and use GNU Radio
+ This package contains Python programs which uses and tests
+ the GNU Radio libraries. The examples include dialtone generation,
+ complete FM receiver and many more exciting applications.
+
--- /dev/null
+GNU Radio was re-packaged by Bdale Garbee <bdale@gag.com> to reflect
+upstream restructuring on Wed, 6 Sep 2006 16:02:03 -0600. Much was
+learned and portions were taken from the previous Debian packages built
+by Ramakrishnan Muthukrishnan and Steinar H. Gunderson
+
+GNU Radio was downloaded from http://www.gnu.org/software/gnuradio/
+
+Upstream Authors:
+ Eric Blossom <eb@comsec.com>
+ Matt Ettus <matt@ettus.com>
+ Stephane Fillod <f8fce@free.fr>
+
+See the AUTHORS file for a more complete list of contributors.
+The current upstream maintainer is Johnathan Corgan <jcorgan@aeinet.com>
+
+Copyright:
+
+GNU Radio is copyrighted by the Free Software Foundation and is licensed
+under the GNU General Public License (GPL), a copy of which is available
+on a Debian system at:
+
+ /usr/share/common-licenses/GPL
+
+The Debian packaging was created by Bdale Garbee <bdale@gag.com>, is
+(c) Copyright 2006 Hewlett-Packard Development Company, L.P.,
+and is made available under the terms of the GPL.
+
--- /dev/null
+usr/share/doc/gnuradio*/html usr/share/doc/gnuradio-doc
+usr/share/doc/gnuradio*/README /usr/share/doc/gnuradio-doc
--- /dev/null
+usr/share/doc/gnuradio-examples
+usr/share/gnuradio
--- /dev/null
+AUTHORS
+NEWS
+README
--- /dev/null
+etc/gnuradio/conf.d
--- /dev/null
+usr/lib
+usr/include
--- /dev/null
+usr/include/gnuradio
+usr/lib/libgnuradio-core*.la
+usr/lib/libgnuradio-core*.so
+usr/lib/pkgconfig/gnuradio-core.pc
--- /dev/null
+usr/lib/libgnuradio-core*.so.*
--- /dev/null
+usr/lib
+usr/include
--- /dev/null
+usr/include/usrp*
+usr/lib/libusrp*.la
+usr/lib/libusrp*.so
+usr/lib/pkgconfig/usrp.pc
--- /dev/null
+usr/lib/libusrp*.so.*
--- /dev/null
+usr/lib/python2.4/site-packages/gnuradio
--- /dev/null
+usr/lib/python*/site-packages/gnuradio
--- /dev/null
+usr/lib/python*/site-packages
--- /dev/null
+usr/lib/python*/site-packages/*usrp*
--- /dev/null
+#!/usr/bin/make -f
+# -*- makefile -*-
+# Sample debian/rules that uses debhelper.
+#
+# This file was originally written by Joey Hess and Craig Small.
+# As a special exception, when this file is copied by dh-make into a
+# dh-make output file, you may use that output file without restriction.
+# This special exception was added by Craig Small in version 0.37 of dh-make.
+#
+# Modified to make a template file for a multi-binary package with separated
+# build-arch and build-indep targets by Bill Allombert 2001
+
+# Uncomment this to turn on verbose mode.
+export DH_VERBOSE=1
+
+# This has to be exported to make some magic below work.
+export DH_OPTIONS
+
+CFLAGS = -Wall -g
+
+ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
+ CFLAGS += -O0
+else
+ CFLAGS += -O2
+endif
+
+configure: configure-stamp
+configure-stamp:
+ dh_testdir
+ [ -f ./configure ] || ./bootstrap
+ CFLAGS="$(CFLAGS)" ./configure \
+ --prefix=/usr --mandir=\$${prefix}/share/man \
+ --infodir=\$${prefix}/share/info --enable-shared \
+ --enable-doxygen --enable-html-docs \
+ --sysconfdir=/etc --enable-all-components \
+ --disable-gr-audio-osx --disable-gr-audio-windows \
+ --disable-gr-qtgui
+ touch configure-stamp
+
+build: build-stamp
+build-stamp: configure-stamp
+
+ $(MAKE)
+ $(MAKE) check
+ touch $@
+
+update:
+ -test -r /usr/share/misc/config.sub && \
+ cp -f /usr/share/misc/config.sub config.sub
+ -test -r /usr/share/misc/config.guess && \
+ cp -f /usr/share/misc/config.guess config.guess
+
+clean:
+ dh_testdir
+ dh_testroot
+ rm -f build-stamp configure-stamp
+
+ if [ -f Makefile ]; \
+ then\
+ if [ -d .svn ]; \
+ then \
+ $(MAKE) maintainer-clean; \
+ else \
+ $(MAKE) distclean; \
+ fi; \
+ fi
+
+
+ dh_clean
+
+install:
+ dh_testdir
+ dh_testroot
+ dh_clean -k
+ dh_installdirs
+
+ $(MAKE) install DESTDIR=$(CURDIR)/debian/tmp
+ install -m 0755 debian/usrp.hotplug \
+ $(CURDIR)/debian/usrp/etc/hotplug.d/usb/
+
+ : # make python scripts starting with '#!' executable
+ for i in `find debian -mindepth 2 -type f ! -perm 755`; do \
+ if head -1 $$i | grep -q '^#!'; then \
+ chmod 755 $$i; \
+ echo "made executable: $$i"; \
+ fi; \
+ done
+
+ dh_install --sourcedir=debian/tmp --list-missing
+
+ cp -r gnuradio-examples/python/* \
+ debian/gnuradio-examples/usr/share/gnuradio/
+ find debian/gnuradio-examples -type f -name Makefile\* -exec rm {} \;
+ find debian/gnuradio-examples -type d -name CVS -exec rm {} \;
+ find debian/gnuradio-examples -name \*.py -exec chmod +x {} \;
+
+# mv debian/gnuradio/usr/bin/microtune.py \
+# debian/gnuradio/usr/bin/microtune
+
+ mv debian/usrp/usr/bin/usrp_ra_receiver.py \
+ debian/usrp/usr/bin/usrp_ra_receiver
+ mv debian/usrp/usr/bin/usrp_psr_receiver.py \
+ debian/usrp/usr/bin/usrp_psr_receiver
+
+# Must not depend on anything. This is to be called by
+# binary-arch/binary-indep
+# in another 'make' thread.
+binary-common:
+ dh_testdir
+ dh_testroot
+ dh_installchangelogs ChangeLog
+ dh_installdocs
+ dh_installexamples
+# dh_installmenu
+# dh_installdebconf
+# dh_installlogrotate
+# dh_installemacsen
+# dh_installpam
+# dh_installmime
+ dh_pycentral
+ dh_python
+# dh_installinit
+# dh_installcron
+# dh_installinfo
+ dh_installman
+ dh_link
+ifneq (,$(findstring -s,$(DH_OPTIONS)))
+ dh_strip --no-package=libgnuradio-core0c2a --no-package=libusrp0c2a
+ DH_OPTIONS= dh_strip --package=libgnuradio-core0c2a \
+ --dbg-package=libgnuradio-core0c2a-dbg
+ DH_OPTIONS= dh_strip --package=libusrp0c2a \
+ --dbg-package=libusrp0c2a-dbg
+else
+ dh_strip
+endif
+ dh_compress
+# dh_movefiles --sourcedir=debian/gnuradio
+ dh_fixperms
+# dh_perl
+ dh_makeshlibs
+ dh_installdeb
+ dh_shlibdeps
+ dh_gencontrol
+ dh_md5sums
+ dh_builddeb
+
+# Build architecture independant packages using the common target.
+binary-indep: build install
+ $(MAKE) -f debian/rules DH_OPTIONS=-i binary-common
+
+# Build architecture dependant packages using the common target.
+binary-arch: build install
+ $(MAKE) -f debian/rules DH_OPTIONS=-s binary-common
+
+binary: binary-arch binary-indep
+.PHONY: build clean binary-indep binary-arch binary install configure
--- /dev/null
+usr/share/doc/gnuradio*/usrp/html usr/share/doc/usrp-doc
+usr/share/doc/gnuradio*/usrp/README /usr/share/doc/usrp-doc
--- /dev/null
+/usr/share/usrp/rev2
+/usr/share/usrp/rev4
--- /dev/null
+usr/share/usrp/rev*/*.rbf
--- /dev/null
+#! /bin/sh
+
+set -e
+
+#DEBHELPER#
+
+if [ "$1" != "configure" ]; then
+ exit 0
+fi
+
+#
+# Activate any unactivated USRPs that are plugged in at install time.
+# This is basically a duplication of the loop in /etc/hotplug/usb.rc,
+# but Md claims it's the best solution for synthesizing hotplug events
+# for the USRPs plugged in at installation time.
+#
+
+#
+# Don't bother doing this unless we have all the firmware we need, and
+# /sbin/hotplug working. (Rationale: If we don't have hotplug working,
+# this will not work next boot/plugin anyhow, so it would be very confusing
+# for the user to have it all work up _until_ the next boot/plugin.)
+#
+[ -r /usr/share/usrp/rev2/std_4rx_0tx.rbf ] || exit 0
+[ -x /sbin/hotplug ] || [ -x /sbin/udevd ] || exit 0
+
+# We need sysfs to do this.
+[ -d /sys/bus/usb/devices/ ] || exit 0
+
+# Go through all USB devices and find unconfigured USRPs (ie. FX2 chips).
+for device in /sys/bus/usb/devices/[0-9]*:*; do
+ devlink=$(readlink -f $device)
+ DEVPATH=${devlink#/sys}
+
+ [ -f $devlink/../idVendor ] || continue
+ PRODUCT="$(cat $devlink/../idVendor)/$(cat $devlink/../idProduct)/$(cat $devlink/../bcdDevice)"
+
+ if [ "$PRODUCT" = "fffe/0002/0002" ] || [ "$PRODUCT" = "fffe/0002/0004" ]; then
+ /usr/bin/usrper load_standard_bits
+ fi
+done
+
+exit 0
--- /dev/null
+etc/hotplug.d/usb
+usr/sbin
--- /dev/null
+usrp/AUTHORS
+usrp/ChangeLog
+usrp/README
--- /dev/null
+#! /bin/sh
+
+GROUP=usrp
+
+# Set the permissions for the USRP devices right.
+set_permissions() {
+ if [ -f "$1" ]
+ then
+ if getent group $GROUP > /dev/null; then
+ chmod 660 "$DEVICE"
+ chown root.$GROUP "$1"
+ fi
+ fi
+}
+
+#
+# If we do not have /sbin/hotplug, we are being called by post-sarge udev
+# emulating hotplug. In that case, all of this is handled by our udev rules,
+# so we don't need to duplicate the work done here.
+#
+if ! [ -x /sbin/hotplug ]; then
+ exit
+fi
+
+if [ "$ACTION" != "add" ]; then
+ exit
+fi
+
+# FIXME: Map the USB device ID to usrper's idea of "which USRP".
+# For now, we just assume the user only has a single one.
+
+case $PRODUCT in
+ # USRP without loaded firmware
+ fffe/2/2 | fffe/2/4)
+ sleep 1 # required on some machines
+ /usr/bin/usrper load_standard_bits
+ set_permissions "$DEVICE"
+ ;;
+
+ # USRP with loaded firmware
+ fffe/2/102 | fffe/2/104)
+ set_permissions "$DEVICE"
+ ;;
+esac
+
+
+
--- /dev/null
+usr/bin/usrper
+usr/bin/usrp_cal_dc_offset
+usr/bin/usrp_ra_receiver.py
+usr/bin/usrp_psr_receiver.py
+usr/share/usrp/rev*/*.ihx
--- /dev/null
+#! /bin/sh
+
+set -e
+
+if [ "$1" != "configure" ]; then
+ exit 0
+fi
+
+#
+# The debhelper udev fragments are broken; they only check for -z "$2",
+# not for upgrades from versions without the udev script.
+#
+if [ -z "$2" ] || dpkg --compare-versions "$2" lt "0.10-3"; then
+ ln -sf ../usrp.rules /etc/udev/rules.d/z60_usrp.rules
+fi
+
+# Create usrp group.
+if ! getent group usrp >/dev/null; then
+ addgroup --system usrp
+fi
+
+#
+# Activate any unactivated USRPs that are plugged in at install time.
+# This is basically a duplication of the loop in /etc/hotplug/usb.rc,
+# but Md claims it's the best solution for synthesizing hotplug events
+# for the USRPs plugged in at installation time.
+#
+
+#
+# Don't bother doing this unless we have all the firmware we need, and
+# hotplugging working. (Rationale: If we don't have hotplug working,
+# this will not work next boot/plugin anyhow, so it would be very confusing
+# for the user to have it all work up _until_ the next boot/plugin.)
+#
+[ -r /usr/share/usrp/rev2/std_4rx_0tx.rbf ] || exit 0
+[ -x /sbin/hotplug ] || [ -x /sbin/udevd ] || exit 0
+
+# We need sysfs to do this.
+[ -d /sys/bus/usb/devices/ ] || exit 0
+
+# Go through all USB devices and find unconfigured USRPs (ie. FX2 chips).
+for device in /sys/bus/usb/devices/[0-9]*:*; do
+ devlink=$(readlink -f $device)
+ DEVPATH=${devlink#/sys}
+
+ [ -f $devlink/../idVendor ] || continue
+ PRODUCT="$(cat $devlink/../idVendor)/$(cat $devlink/../idProduct)/$(cat $devlink/../bcdDevice)"
+
+ if [ "$PRODUCT" = "fffe/0002/0002" ] || [ "$PRODUCT" = "fffe/0002/0004" ]; then
+ /usr/bin/usrper load_standard_bits
+ fi
+done
+
+#DEBHELPER#
+
+exit 0
--- /dev/null
+#! /bin/sh
+
+set -e
+
+if [ "$1" != "remove" ]; then
+ exit 0
+fi
+
+rm -f /etc/udev/rules.d/z60_usrp.rules
+
+#DEBHELPER#
+
+exit 0
--- /dev/null
+# USRP without loaded firmware (FX2)
+BUS=="usb", SYSFS{idVendor}=="fffe", SYSFS{idProduct}=="0002", SYSFS{bcdDevice}=="0002", GROUP="usrp", RUN+="/usr/bin/usrper load_standard_bits"
+BUS=="usb", SYSFS{idVendor}=="fffe", SYSFS{idProduct}=="0002", SYSFS{bcdDevice}=="0004", GROUP="usrp", RUN+="/usr/bin/usrper load_standard_bits"
+
+# USRP with loaded firmware
+BUS=="usb", SYSFS{idVendor}=="fffe", SYSFS{idProduct}=="0002", SYSFS{bcdDevice}=="0102", GROUP="usrp"
+BUS=="usb", SYSFS{idVendor}=="fffe", SYSFS{idProduct}=="0002", SYSFS{bcdDevice}=="0104", GROUP="usrp"
+
--- /dev/null
+
+GSM 06.10 13 kbit/s RPE/LTP speech compression available
+--------------------------------------------------------
+
+The Communications and Operating Systems Research Group (KBS) at the
+Technische Universitaet Berlin is currently working on a set of
+UNIX-based tools for computer-mediated telecooperation that will be
+made freely available.
+
+As part of this effort we are publishing an implementation of the
+European GSM 06.10 provisional standard for full-rate speech
+transcoding, prI-ETS 300 036, which uses RPE/LTP (residual pulse
+excitation/long term prediction) coding at 13 kbit/s.
+
+GSM 06.10 compresses frames of 160 13-bit samples (8 kHz sampling
+rate, i.e. a frame rate of 50 Hz) into 260 bits; for compatibility
+with typical UNIX applications, our implementation turns frames of 160
+16-bit linear samples into 33-byte frames (1650 Bytes/s).
+The quality of the algorithm is good enough for reliable speaker
+recognition; even music often survives transcoding in recognizable
+form (given the bandwidth limitations of 8 kHz sampling rate).
+
+The interfaces offered are a front end modelled after compress(1), and
+a library API. Compression and decompression run faster than realtime
+on most SPARCstations. The implementation has been verified against the
+ETSI standard test patterns.
+
+Jutta Degener (jutta@cs.tu-berlin.de)
+Carsten Bormann (cabo@cs.tu-berlin.de)
+
+Communications and Operating Systems Research Group, TU Berlin
+Fax: +49.30.31425156, Phone: +49.30.31424315
+
+--
+Copyright 1992 by Jutta Degener and Carsten Bormann, Technische
+Universitaet Berlin. See the accompanying file "COPYRIGHT" for
+details. THERE IS ABSOLUTELY NO WARRANTY FOR THIS SOFTWARE.
+++ /dev/null
-
-GSM 06.10 13 kbit/s RPE/LTP speech compression available
---------------------------------------------------------
-
-The Communications and Operating Systems Research Group (KBS) at the
-Technische Universitaet Berlin is currently working on a set of
-UNIX-based tools for computer-mediated telecooperation that will be
-made freely available.
-
-As part of this effort we are publishing an implementation of the
-European GSM 06.10 provisional standard for full-rate speech
-transcoding, prI-ETS 300 036, which uses RPE/LTP (residual pulse
-excitation/long term prediction) coding at 13 kbit/s.
-
-GSM 06.10 compresses frames of 160 13-bit samples (8 kHz sampling
-rate, i.e. a frame rate of 50 Hz) into 260 bits; for compatibility
-with typical UNIX applications, our implementation turns frames of 160
-16-bit linear samples into 33-byte frames (1650 Bytes/s).
-The quality of the algorithm is good enough for reliable speaker
-recognition; even music often survives transcoding in recognizable
-form (given the bandwidth limitations of 8 kHz sampling rate).
-
-The interfaces offered are a front end modelled after compress(1), and
-a library API. Compression and decompression run faster than realtime
-on most SPARCstations. The implementation has been verified against the
-ETSI standard test patterns.
-
-Jutta Degener (jutta@cs.tu-berlin.de)
-Carsten Bormann (cabo@cs.tu-berlin.de)
-
-Communications and Operating Systems Research Group, TU Berlin
-Fax: +49.30.31425156, Phone: +49.30.31424315
-
---
-Copyright 1992 by Jutta Degener and Carsten Bormann, Technische
-Universitaet Berlin. See the accompanying file "COPYRIGHT" for
-details. THERE IS ABSOLUTELY NO WARRANTY FOR THIS SOFTWARE.
projects / debian / gnuradio / commitdiff