freshen provided files and notes to reflect creation of working-v0.1 tag

diff --git a/TeleMetrum/index.mdwn b/TeleMetrum/index.mdwn
index ce5888073aa7521d1e101b70dfadf5e14360600f..e4f91808f176c6b141ba27b71bc52a8ef029aa53 100644 (file)
--- a/TeleMetrum/index.mdwn
+++ b/TeleMetrum/index.mdwn
@@ -104,18 +104,19 @@ simplify things by building a new altimeter with integrated RF link!
 
 The hardware design current gEDA files are available from 
 [git.gag.com](http://git.gag.com) in the project 
-[hw/telemetrum](http://git.gag.com/?p=hw/telemetrum;a=summary).  The 'fab' 
-tag on the master branch reflects
-the artwork as sent out for PCB fab.  The 'loaded' tag on the master branch
-indicates the parts Bdale loads for a functional board, but the schematic
-does not reflect the cuts and jumps or added resistors.  The 'nextcut' branch 
+[hw/telemetrum](http://git.gag.com/?p=hw/telemetrum;a=summary).  
+The 'working-v0.1' tag on the master branch indicates what we're actually
+flying right now.  The v0.1 PCB artwork, and schematic updated to include
+the parts Bdale loads for a functional board including the two cuts and jumps 
+and two added resistors plus ground leads required as rework.  
+The 'nextcut' branch 
 is work towards our next PCB revision.  The 'ground' branch has a cut-down
 schematic used to generate the BOM for partially loading boards to use in
 the matching [TeleTerra](../TeleTerra) ground station design.
 
 For those who don't have ready access to the gEDA suite, here are pdf snapshots
-of files in more easily readable form.  The schematic and BOM are from the 
-'nextcut' branch as of 20 April 2009, the artwork is of the v0.1 boards:
+of files in more easily readable form.  These are all as of the working-v0.1
+tag:  
 
 * [schematic](telemetrum.pdf)
 * [pcb artwork](telemetrum.pcb.pdf)
@@ -141,7 +142,7 @@ Work is underway on a second revision of TeleMetrum with the following changes:
 * stretch board length by 0.25 inches
 * adjust USB connector position to be flush with edge of board
 * eliminate beeper
-* eliminate temperature sensor, since baro sensor is already compensated
+* eliminate temperature sensor, since baro sensor is already compensated and there's a sensor on the cc1111
 * eliminate serial port connector
 * integrate MN5010HS GPS receiver and chip antenna on-board
 * change debug connector to 4 pin 1.25mm connector as was used for serial port

diff --git a/TeleMetrum/telemetrum.bom b/TeleMetrum/telemetrum.bom
index 020d401be731eb5435e0cdb41f649ec4788c9d23..f33f11086c62f8a59360c61d18d36ddd68668d23 100644 (file)
--- a/TeleMetrum/telemetrum.bom
+++ b/TeleMetrum/telemetrum.bom
@@ -38,7 +38,7 @@ J2    unknown unknown 530470210       WM1731-ND
 J3     unknown unknown 530470210       WM1731-ND       
 J4     unknown unknown 282834-6        A98337-ND       
 J5     unknown unknown 548190572       WM17116CT-ND    
-J6     unknown unknown 530470510       WM1734-ND       
+J6     unknown unknown 100mil4pin      ED7464-ND       
 J7     unknown unknown 530470410       WM1733-ND       
 J8     unknown SMA     sma-edge        CONSMA003.062-ND        
 L1     INDUCTOR        27nH    0402    490-2628-1-ND   
@@ -48,12 +48,12 @@ L4  INDUCTOR        27nH    0402    490-2628-1-ND
 Q1     FD335N  unknown SuperSOT3       FDN335NCT-ND    
 Q2     FD335N  unknown SuperSOT3       FDN335NCT-ND    
 R10    RESISTOR        5k      0402    311-5.10KLRCT-ND        
-R11    RESISTOR        10K     0402    RMCF1/16S10K1%RCT-ND    
+R11    RESISTOR        10k     0402    RMCF1/16S10K1%RCT-ND    
 R12    RESISTOR        270     0402    541-270LCT-ND   
 R13    RESISTOR        270     0402    541-270LCT-ND   
 R14    RESISTOR        100k    0402    311-100KLRCT-ND 
 R15    RESISTOR        100k    0402    311-100KLRCT-ND 
-R16    RESISTOR        56K     0402    RHM56.0KLCT-ND  
+R16    RESISTOR        56k     0402    RHM56.0KLCT-ND  
 R17    RESISTOR        2.7k    0402    RHM2.70KLCT-ND  
 R18    RESISTOR        10k     0402    RMCF1/16S10K1%RCT-ND    
 R19    RESISTOR        100     0402    P100JCT-ND      
@@ -63,9 +63,9 @@ R21   RESISTOR        27k     0402    311-27KJRCT-ND
 R22    RESISTOR        27k     0402    311-27KJRCT-ND  
 R2     RESISTOR        10k     0402    RMCF1/16S10K1%RCT-ND    
 R3     RESISTOR        10k     0402    RMCF1/16S10K1%RCT-ND    
-R4     RESISTOR        10K     0402    RMCF1/16S10K1%RCT-ND    
+R4     RESISTOR        10k     0402    RMCF1/16S10K1%RCT-ND    
 R5     RESISTOR        5k      0402    311-5.10KLRCT-ND        
-R6     RESISTOR        1.5K    0402    RMCF1/16S1.5K1%RCT-ND   
+R6     RESISTOR        1.5k    0402    RMCF1/16S1.5K1%RCT-ND   
 R7     RESISTOR        33      0402    RHM33.0LCT-ND   
 R8     RESISTOR        33      0402    RHM33.0LCT-ND   
 R9     RESISTOR        270     0402    541-270LCT-ND   

diff --git a/TeleMetrum/telemetrum.pdf b/TeleMetrum/telemetrum.pdf
index 617f43ac42a99170d6320c1db65422b0bad33c1d..5c1b2067ca873c3a2418b90cc101f3b2da7c317e 100644 (file)
Binary files a/TeleMetrum/telemetrum.pdf and b/TeleMetrum/telemetrum.pdf differ