X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=src%2Fstm%2Fao_serial_stm.c;h=00409f4a85957e16e53825f4e8420e85a168c535;hb=f221c78e6237e0a118ebe85c25e433fe16a7735d;hp=95189f0c6704d1080b5dcbc947e82b55293810f1;hpb=c9e61a4f1f0ce5e5177a2252e8b7a02a578e77f1;p=fw%2Faltos

diff --git a/src/stm/ao_serial_stm.c b/src/stm/ao_serial_stm.c
index 95189f0c..00409f4a 100644
--- a/src/stm/ao_serial_stm.c
+++ b/src/stm/ao_serial_stm.c
@@ -34,7 +34,7 @@ ao_debug_out(char c)
 }
 
 static void
-ao_usart_tx_start(struct ao_stm_usart *usart)
+_ao_usart_tx_start(struct ao_stm_usart *usart)
 {
 	if (!ao_fifo_empty(usart->tx_fifo) && !usart->tx_started)
 	{
@@ -61,7 +61,7 @@ ao_usart_isr(struct ao_stm_usart *usart, int stdin)
 	}
 	if (sr & (1 << STM_USART_SR_TC)) {
 		usart->tx_started = 0;
-		ao_usart_tx_start(usart);
+		_ao_usart_tx_start(usart);
 		ao_wakeup(&usart->tx_fifo);
 	}
 }
@@ -70,11 +70,11 @@ char
 ao_usart_getchar(struct ao_stm_usart *usart)
 {
 	char c;
-	cli();
+	ao_arch_block_interrupts();
 	while (ao_fifo_empty(usart->rx_fifo))
 		ao_sleep(&usart->rx_fifo);
 	ao_fifo_remove(usart->rx_fifo, c);
-	sei();
+	ao_arch_release_interrupts();
 	return c;
 }
 
@@ -82,50 +82,50 @@ char
 ao_usart_pollchar(struct ao_stm_usart *usart)
 {
 	char	c;
-	cli();
-	if (ao_fifo_empty(usart->rx_fifo)) {
-		sei();
-		return AO_READ_AGAIN;
-	}
-	ao_fifo_remove(usart->rx_fifo,c);
-	sei();
+	
+	ao_arch_block_interrupts();
+	if (ao_fifo_empty(usart->rx_fifo))
+		c = AO_READ_AGAIN;
+	else
+		ao_fifo_remove(usart->rx_fifo,c);
+	ao_arch_release_interrupts();
 	return c;
 }
 
 void
 ao_usart_putchar(struct ao_stm_usart *usart, char c)
 {
-	cli();
+	ao_arch_block_interrupts();
 	while (ao_fifo_full(usart->tx_fifo))
 		ao_sleep(&usart->tx_fifo);
 	ao_fifo_insert(usart->tx_fifo, c);
-	ao_usart_tx_start(usart);
-	sei();
+	_ao_usart_tx_start(usart);
+	ao_arch_release_interrupts();
 }
 
 void
 ao_usart_drain(struct ao_stm_usart *usart)
 {
-	cli();
+	ao_arch_block_interrupts();
 	while (!ao_fifo_empty(usart->tx_fifo))
 		ao_sleep(&usart->tx_fifo);
-	sei();
+	ao_arch_release_interrupts();
 }
 
 static const struct {
 	uint32_t brr;
 } ao_usart_speeds[] = {
 	[AO_SERIAL_SPEED_4800] = {
-		STM_APB1 / 4800
+		AO_PCLK1 / 4800
 	},
 	[AO_SERIAL_SPEED_9600] = {
-		STM_APB1 / 9600
+		AO_PCLK1 / 9600
 	},
 	[AO_SERIAL_SPEED_19200] = {
-		STM_APB1 / 19200
+		AO_PCLK1 / 19200
 	},
 	[AO_SERIAL_SPEED_57600] = {
-		STM_APB1 / 57600
+		AO_PCLK1 / 57600
 	},
 };
 
@@ -134,7 +134,7 @@ ao_usart_set_speed(struct ao_stm_usart *usart, uint8_t speed)
 {
 	if (speed > AO_SERIAL_SPEED_57600)
 		return;
-	stm_usart1.brr = ao_usart_speeds[speed].brr;
+	usart->reg->brr = ao_usart_speeds[speed].brr;
 }
 
 void
@@ -189,7 +189,6 @@ struct ao_stm_usart ao_stm_usart1;
 
 void stm_usart1_isr(void) { ao_usart_isr(&ao_stm_usart1, USE_SERIAL_1_STDIN); }
 
-#if USE_SERIAL_1_STDIN
 char
 ao_serial1_getchar(void)
 {
@@ -207,7 +206,12 @@ ao_serial1_pollchar(void)
 {
 	return ao_usart_pollchar(&ao_stm_usart1);
 }
-#endif	/* USE_SERIAL_1_STDIN */
+
+void
+ao_serial1_set_speed(uint8_t speed)
+{
+	ao_usart_set_speed(&ao_stm_usart1, speed);
+}
 #endif	/* HAS_SERIAL_1 */
 
 #if HAS_SERIAL_2
@@ -216,7 +220,6 @@ struct ao_stm_usart ao_stm_usart2;
 
 void stm_usart2_isr(void) { ao_usart_isr(&ao_stm_usart2, USE_SERIAL_2_STDIN); }
 
-#if USE_SERIAL_2_STDIN
 char
 ao_serial2_getchar(void)
 {
@@ -234,16 +237,20 @@ ao_serial2_pollchar(void)
 {
 	return ao_usart_pollchar(&ao_stm_usart2);
 }
-#endif	/* USE_SERIAL_2_STDIN */
+
+void
+ao_serial2_set_speed(uint8_t speed)
+{
+	ao_usart_set_speed(&ao_stm_usart2, speed);
+}
 #endif	/* HAS_SERIAL_2 */
 
 #if HAS_SERIAL_3
 
 struct ao_stm_usart ao_stm_usart3;
 
-void stm_usart3_isr(void) { ao_usart_isr(&ao_stm_usart3, USE_SERIAL_3_STDIN); }
+void stm_usart3_isr(void) { ao_usart_isr(&ao_stm_usart3, USE_SERIAL_2_STDIN); }
 
-#if USE_SERIAL_3_STDIN
 char
 ao_serial3_getchar(void)
 {
@@ -259,9 +266,14 @@ ao_serial3_putchar(char c)
 char
 ao_serial3_pollchar(void)
 {
-	return ao_usart_pollchar(&ao_stm_usart2);
+	return ao_usart_pollchar(&ao_stm_usart3);
+}
+
+void
+ao_serial3_set_speed(uint8_t speed)
+{
+	ao_usart_set_speed(&ao_stm_usart3, speed);
 }
-#endif	/* USE_SERIAL_3_STDIN */
 #endif	/* HAS_SERIAL_3 */
 
 void
@@ -291,8 +303,8 @@ ao_serial_init(void)
 #endif
 	/* Enable USART */
 	stm_rcc.apb2enr |= (1 << STM_RCC_APB2ENR_USART1EN);
-	ao_stm_usart1.reg = &stm_usart1;
 
+	ao_stm_usart1.reg = &stm_usart1;
 	ao_usart_init(&ao_stm_usart1);
 
 	stm_nvic_set_enable(STM_ISR_USART1_POS);
@@ -370,7 +382,6 @@ ao_serial_init(void)
 #endif
 #endif
 #endif
-	
 	/* Enable USART */
 	stm_rcc.apb1enr |= (1 << STM_RCC_APB1ENR_USART3EN);