X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=doc%2Feasymini-device.inc;h=fb2b6098879f9b95f66f14ca94dbcae4e32bd827;hb=debian;hp=82ea959c3be825282aa17cdc1f01ef8850853155;hpb=b340cbf1403a5f5b181a215935f713a50da8e5e4;p=fw%2Faltos diff --git a/doc/easymini-device.inc b/doc/easymini-device.inc index 82ea959c..841f7a3e 100644 --- a/doc/easymini-device.inc +++ b/doc/easymini-device.inc @@ -31,11 +31,11 @@ |Main pyro channel connection to pyro circuit |Top 2 - |Main + - |Main pyro channel common connection to battery + + |Main +++ + |Main pyro channel common connection to battery +++ |Top 3 - |Battery + + |Battery +++ |Positive external battery terminal |Top 4 @@ -47,8 +47,8 @@ |Apogee pyro channel connection to pyro circuit |Bottom 2 - |Apogee + - |Apogee pyro channel common connection to battery + + |Apogee +++ + |Apogee pyro channel common connection to battery +++ |Bottom 3 |Switch Output @@ -94,9 +94,11 @@ ground, connect it to the negative external battery connection, top terminal 4. - Connecting the positive battery terminal to the pyro + Connecting the switched positive battery terminal to the pyro charges must be done separate from EasyMini, by soldering - them together or using some other connector. + them together or using some other connector. Note that for + safety, you must put a switch between the pyro battery and + the rest of the circuit! The other lead from each pyro charge is then inserted into the appropriate per-pyro channel screw terminal (top