X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=debian%2Fchangelog;h=e9949a51ee4855b9a6324c2076991c80f4d41b74;hb=debian;hp=c67a0a66f589f300f4bdffa0e879f259618341d3;hpb=464d43fc0a37dbf1f488bdacc97f5e8179d690a1;p=fw%2Faltos diff --git a/debian/changelog b/debian/changelog index c67a0a66..6f7a1bec 100644 --- a/debian/changelog +++ b/debian/changelog @@ -1,3 +1,158 @@ +altos (1.9.18-1) unstable; urgency=medium + + [ Bdale Garbee ] + * doc: fix a typo in the staging example + * update Releasing with learnings from 1.9.17 release + * set java-version=8 in rules to enable openjdk 21 support, closes: #1052587 + * add a paragraph about how to hook up a pressure sensor to an EasyMotor + * kernel: conditionalize config "report in feet" on presence of baro sensor + * fix product name + * update ChangeLog for 1.9.18 release + + [ Keith Packard ] + * doc: Use -optimize with asciidoctorpdf + * micropeak: Include firmware in install bits + * fixup seven segment debug code + * altos: Use BMI088 as z-axis accel as needed + * altos: Initial easytimer-v2 bits + * altos: Build easytimer-v2 bits + * altos/easytimer-v2: Add logging bits + * altos/easytimer-v2: Update comments in flash loader ao_pins.h + * altos/samd21: Enable stdio for USB by default + * altos: Updating pyro format tried to copy entries with no value + * altos/easytimer-v2: Initialize logging too + * Fix configure tests for multi-arch libaltos + * altos/lpc: Adjust ADC clock from 450kHz to 4.5MHz + * ao-tools: Add flash utility for stm32f1x chips + * altos: Start work on stm32f1 support + * altos/stm32f1: More stm32f103 work + * altos/stm32f103-nucleo: Use more bits + * altos/stm32f1: Start work on self-flash code + * stm32f1: Get boot loader working + * altos/stm32f103-nucleo: Add boot loader + * altos: Add ST7565 LCD driver + * src/draw: Provide some useful constants + * altos/draw: Build demos with -O3 to catch more bugs + * altos/draw: Skip line adjustment for vertical/horizontal + * altos/draw: Have each font declare ao_glyph_temp as .comm + * altos/driver: Document setting for AO_ST7565_BIAS + * altos/stm32f1: Add DMA and SPI drivers + * altos/stm32f103-nucleo: Drive a screen too + * altos/stm32f103-nucleo: Draw more of the LCO demo screen + * altos: Clean up st7565 LCD driver + * altos: Fix up stm32f103-nucleo 'lco' demo mode + * altos/stm32f1: Add more IP block drivers + * drivers: Add real i2c support to mmc5983 + * altos/easymega-v3.0: Switch to STM32F103 + * altos/telelco-v3: Create initial flash loader setup + * altos/telelco-v3: Move USB pullup from PA9 to PA10 + * altos/stm32f1: Add ao_fast_timer.c + * altos: Build in 'draw' directory first + * altos: Add initial TeleLCO-v3 bits + * altos/stm32f1: Add eeprom emulation using flash + * altos/telelco-v3.0: Use eeprom emulation for config storage + * altos/telelco-v3.0: Add some real drawing stuff + * altos: Move ao_adc_single.h API header to kernel/ + * altos/stm32f1: Add ao_adc_single support + * altos/telelco-v3.0: Add ao_adc_single usage to get battery voltage + * altos/telelco-v3.0: Fix up search UI + * altos/telelco*: Make LCO voltage display work on 2.0 and 3.0 + * altos/stm32f1: Support beeper on tim3 + * altos/stm32f1: Set PLLXTPRE value + * altos/stm32f1: Add STM_RCC_CFGR_PLLXTPRE_MASK value + * altos/telelco-v3.0: Add USB pull up + * altos/stm32f1: Turn on ADC during initialization sequence + * altos/stm32f1: Poke the ADC harder to get it to sample + * altos/stm32f1: Allow PA6 to be left alone in the SPI code + * altos/telelco-v3.0: Don't connect PA6 to SPI + * altos/telelco-v3.0: Battery voltage is on PA2 + * altos/stm32f1: Support timers 2,3,4 for fast timer + * altos/telelco-v3.0: Use timer 2 for fast timer + * src/stm32f1: Disable extra JTAG pins in ao_clock_init + * switch to mode 3 for LCD + * stm32f1: make spi speed per-bus + * altos: Add SPI bus parameter to ao_spi_speed + * altos: Add wiring docs to st-7565 header + * altos: Fix pretend pad range for TeleLCO + * telelco-v3.0: Minor setup fixes + * altos: Build TeleLCO v3.0 bits by default + * altos/telelco-v3.0: Add contrast setting + * altos: Bump ST7565 speed to 20MHz + * altos/telelco-v3.0: Configure SPI GPIO pins to 50MHz + * altos/stm32f1: For some reason the DBG registers aren't always available + * altos: Add support for backlight control in ao_lco_bits + * altos/telelco-v3.0: Control LCD backlight with PWM + * telelco-v3.0: Add info page + * altos/telelco-v3: Add logo to 'info' page + * altos/draw: Add ao_text_width + * altos/telelco: Update backlight/contrast display upon change + * altos/st7565: Diff image during update + * altos/telelco-v3.0: Show backlight/contrast value as percent + * altos/stm32f1: Set beeper pin to 0 while off + * altos/telelco: Add per-box RSSI display screen + * altos/telelco: Add RSSI display to older devices + * altos/st7565: Set default contrast to 13 + * altos/telelco-v3: Minor UI tweaks + * altos/easytimer-v2: Fix up ao_pins.h + * altoslib: Add EasyTimer-v2 support + * altos/easytimer-v2: Set default log size to 192kB + * altos/easytimer-v2: Fix product name + * altosui: Make accel cal dialog say 'beeper' instead of 'antenna' + * stm32f1: Clean up some ADC definitions + * src/easymini-2.0: Add combined .dfu file for Seeed testing + * altoslib: Add EasyMega v3.0 support + * altos/stm32f103: Fix continuous ADC code + * altos: Build EasyMega v3.0 by defaul + * altos/easymega-v3.0: Update i2c pin usage + * altos/stm32f1: Grab both TX/RX DMA mutexes while doing I2C + * altos/easytimer-v2: Generate combined .ihx file for seeed testing + * altos: ao_fec_prepare using wrong value for input len + * altos/test: Adjust CRC error rate after FEC fix + * altos/test: Add FEC test for simple 'hello' message + * altosui: Set the beeper to 0 to disable + * altosui: Support gps receiver setting + * Add EasyTimer v2 firmware + * doc: Add 1.9.18 release notes + * Version 1.9.18 + * Fix up fat build target + * altos/draw: Add 'install' target + * doc: Add 1.9.18 release notes + * Version 1.9.18 + + -- Bdale Garbee Sun, 28 Apr 2024 19:45:15 -0600 + +altos (1.9.17-1) unstable; urgency=medium + + [ Bdale Garbee ] + * have TeleGPS production script save RF cal value + * update Releasing based on 1.9.16 release experiences + * doc: fix a typo in the staging example + * ao-test-igniter: allow anything other than 'open' to be valid so LED tests work + * ao-bringup: be consistent with success text in TeleGPS test script + * update ChangeLog for 1.9.17 release + + [ Keith Packard ] + * altos-mapd: Install systemd dir in arch-independent location + * altoslib: Support Monitor Idle for EasyMini-3 + * altos/stm32f042: Increase interrupt stack to 256 bytes + * altos: Add AO_STACK_CANARY to detect stack overflows sometimes + * altos/stmf0: Disable ao_boot_check_pin if not in use + * altos: Compute igniter good/bad thresholds using 3.5V value + * altos: Add pyro voltage divider values to boards with them + * altos: Don't include ao_pyro.h into telelco code + * altos: Use pyro voltage to check igniters + * altos: Use ublox-10 mode for TM v4.0 + * doc: Release notes for 1.9.17 + * Version 1.9.17 + + -- Bdale Garbee Wed, 30 Aug 2023 10:50:23 -0600 + +altos (1.9.16-2) unstable; urgency=medium + + * fix path systemd service file for mapd is deliverd to, closes: #1036022 + + -- Bdale Garbee Sun, 14 May 2023 10:48:57 -0700 + altos (1.9.16-1) unstable; urgency=medium [ Keith Packard ]