X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=debian%2Fchangelog;h=e9949a51ee4855b9a6324c2076991c80f4d41b74;hb=debian;hp=554501f1a26caac777cf4ed9021e009cf78fdc49;hpb=3ead5d54135003702f771191d2c53abb584d1695;p=fw%2Faltos

diff --git a/debian/changelog b/debian/changelog
index 554501f1..6f7a1bec 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,3 +1,1895 @@
+altos (1.9.18-1) unstable; urgency=medium
+
+  [ Bdale Garbee ]
+  * doc: fix a typo in the staging example
+  * update Releasing with learnings from 1.9.17 release
+  * set java-version=8 in rules to enable openjdk 21 support, closes: #1052587
+  * add a paragraph about how to hook up a pressure sensor to an EasyMotor
+  * kernel: conditionalize config "report in feet" on presence of baro sensor
+  * fix product name
+  * update ChangeLog for 1.9.18 release
+
+  [ Keith Packard ]
+  * doc: Use -optimize with asciidoctorpdf
+  * micropeak: Include firmware in install bits
+  * fixup seven segment debug code
+  * altos: Use BMI088 as z-axis accel as needed
+  * altos: Initial easytimer-v2 bits
+  * altos: Build easytimer-v2 bits
+  * altos/easytimer-v2: Add logging bits
+  * altos/easytimer-v2: Update comments in flash loader ao_pins.h
+  * altos/samd21: Enable stdio for USB by default
+  * altos: Updating pyro format tried to copy entries with no value
+  * altos/easytimer-v2: Initialize logging too
+  * Fix configure tests for multi-arch libaltos
+  * altos/lpc: Adjust ADC clock from 450kHz to 4.5MHz
+  * ao-tools: Add flash utility for stm32f1x chips
+  * altos: Start work on stm32f1 support
+  * altos/stm32f1: More stm32f103 work
+  * altos/stm32f103-nucleo: Use more bits
+  * altos/stm32f1: Start work on self-flash code
+  * stm32f1: Get boot loader working
+  * altos/stm32f103-nucleo: Add boot loader
+  * altos: Add ST7565 LCD driver
+  * src/draw: Provide some useful constants
+  * altos/draw: Build demos with -O3 to catch more bugs
+  * altos/draw: Skip line adjustment for vertical/horizontal
+  * altos/draw: Have each font declare ao_glyph_temp as .comm
+  * altos/driver: Document setting for AO_ST7565_BIAS
+  * altos/stm32f1: Add DMA and SPI drivers
+  * altos/stm32f103-nucleo: Drive a screen too
+  * altos/stm32f103-nucleo: Draw more of the LCO demo screen
+  * altos: Clean up st7565 LCD driver
+  * altos: Fix up stm32f103-nucleo 'lco' demo mode
+  * altos/stm32f1: Add more IP block drivers
+  * drivers: Add real i2c support to mmc5983
+  * altos/easymega-v3.0: Switch to STM32F103
+  * altos/telelco-v3: Create initial flash loader setup
+  * altos/telelco-v3: Move USB pullup from PA9 to PA10
+  * altos/stm32f1: Add ao_fast_timer.c
+  * altos: Build in 'draw' directory first
+  * altos: Add initial TeleLCO-v3 bits
+  * altos/stm32f1: Add eeprom emulation using flash
+  * altos/telelco-v3.0: Use eeprom emulation for config storage
+  * altos/telelco-v3.0: Add some real drawing stuff
+  * altos: Move ao_adc_single.h API header to kernel/
+  * altos/stm32f1: Add ao_adc_single support
+  * altos/telelco-v3.0: Add ao_adc_single usage to get battery voltage
+  * altos/telelco-v3.0: Fix up search UI
+  * altos/telelco*: Make LCO voltage display work on 2.0 and 3.0
+  * altos/stm32f1: Support beeper on tim3
+  * altos/stm32f1: Set PLLXTPRE value
+  * altos/stm32f1: Add STM_RCC_CFGR_PLLXTPRE_MASK value
+  * altos/telelco-v3.0: Add USB pull up
+  * altos/stm32f1: Turn on ADC during initialization sequence
+  * altos/stm32f1: Poke the ADC harder to get it to sample
+  * altos/stm32f1: Allow PA6 to be left alone in the SPI code
+  * altos/telelco-v3.0: Don't connect PA6 to SPI
+  * altos/telelco-v3.0: Battery voltage is on PA2
+  * altos/stm32f1: Support timers 2,3,4 for fast timer
+  * altos/telelco-v3.0: Use timer 2 for fast timer
+  * src/stm32f1: Disable extra JTAG pins in ao_clock_init
+  * switch to mode 3 for LCD
+  * stm32f1: make spi speed per-bus
+  * altos: Add SPI bus parameter to ao_spi_speed
+  * altos: Add wiring docs to st-7565 header
+  * altos: Fix pretend pad range for TeleLCO
+  * telelco-v3.0: Minor setup fixes
+  * altos: Build TeleLCO v3.0 bits by default
+  * altos/telelco-v3.0: Add contrast setting
+  * altos: Bump ST7565 speed to 20MHz
+  * altos/telelco-v3.0: Configure SPI GPIO pins to 50MHz
+  * altos/stm32f1: For some reason the DBG registers aren't always available
+  * altos: Add support for backlight control in ao_lco_bits
+  * altos/telelco-v3.0: Control LCD backlight with PWM
+  * telelco-v3.0: Add info page
+  * altos/telelco-v3: Add logo to 'info' page
+  * altos/draw: Add ao_text_width
+  * altos/telelco: Update backlight/contrast display upon change
+  * altos/st7565: Diff image during update
+  * altos/telelco-v3.0: Show backlight/contrast value as percent
+  * altos/stm32f1: Set beeper pin to 0 while off
+  * altos/telelco: Add per-box RSSI display screen
+  * altos/telelco: Add RSSI display to older devices
+  * altos/st7565: Set default contrast to 13
+  * altos/telelco-v3: Minor UI tweaks
+  * altos/easytimer-v2: Fix up ao_pins.h
+  * altoslib: Add EasyTimer-v2 support
+  * altos/easytimer-v2: Set default log size to 192kB
+  * altos/easytimer-v2: Fix product name
+  * altosui: Make accel cal dialog say 'beeper' instead of 'antenna'
+  * stm32f1: Clean up some ADC definitions
+  * src/easymini-2.0: Add combined .dfu file for Seeed testing
+  * altoslib: Add EasyMega v3.0 support
+  * altos/stm32f103: Fix continuous ADC code
+  * altos: Build EasyMega v3.0 by defaul
+  * altos/easymega-v3.0: Update i2c pin usage
+  * altos/stm32f1: Grab both TX/RX DMA mutexes while doing I2C
+  * altos/easytimer-v2: Generate combined .ihx file for seeed testing
+  * altos: ao_fec_prepare using wrong value for input len
+  * altos/test: Adjust CRC error rate after FEC fix
+  * altos/test: Add FEC test for simple 'hello' message
+  * altosui: Set the beeper to 0 to disable
+  * altosui: Support gps receiver setting
+  * Add EasyTimer v2 firmware
+  * doc: Add 1.9.18 release notes
+  * Version 1.9.18
+  * Fix up fat build target
+  * altos/draw: Add 'install' target
+  * doc: Add 1.9.18 release notes
+  * Version 1.9.18
+
+ -- Bdale Garbee <bdale@gag.com>  Sun, 28 Apr 2024 19:45:15 -0600
+
+altos (1.9.17-1) unstable; urgency=medium
+
+  [ Bdale Garbee ]
+  * have TeleGPS production script save RF cal value
+  * update Releasing based on 1.9.16 release experiences
+  * doc: fix a typo in the staging example
+  * ao-test-igniter: allow anything other than 'open' to be valid so LED tests work
+  * ao-bringup: be consistent with success text in TeleGPS test script
+  * update ChangeLog for 1.9.17 release
+
+  [ Keith Packard ]
+  * altos-mapd: Install systemd dir in arch-independent location
+  * altoslib: Support Monitor Idle for EasyMini-3
+  * altos/stm32f042: Increase interrupt stack to 256 bytes
+  * altos: Add AO_STACK_CANARY to detect stack overflows sometimes
+  * altos/stmf0: Disable ao_boot_check_pin if not in use
+  * altos: Compute igniter good/bad thresholds using 3.5V value
+  * altos: Add pyro voltage divider values to boards with them
+  * altos: Don't include ao_pyro.h into telelco code
+  * altos: Use pyro voltage to check igniters
+  * altos: Use ublox-10 mode for TM v4.0
+  * doc: Release notes for 1.9.17
+  * Version 1.9.17
+
+ -- Bdale Garbee <bdale@gag.com>  Wed, 30 Aug 2023 10:50:23 -0600
+
+altos (1.9.16-2) unstable; urgency=medium
+
+  * fix path systemd service file for mapd is deliverd to, closes: #1036022
+
+ -- Bdale Garbee <bdale@gag.com>  Sun, 14 May 2023 10:48:57 -0700
+
+altos (1.9.16-1) unstable; urgency=medium
+
+  [ Keith Packard ]
+  * altos: Fill in more of the draw code
+  * altos/draw: Add poly fill function
+  * altos/draw: Only cover ASCII
+  * altos/draw: Make test drawing app emulate TeleLCO
+  * altos/draw: Use float for polygon coords
+  * altos/draw: Add logo
+  * altos/draw: Add more fonts
+  * altos/draw: Move font files to subdirectory
+  * altos/draw: Add monospaced font
+  * altos/draw: Convert draw test framework to modern C
+  * altos/draw: Add transforms to polygon code
+  * altos/draw: Add NotoMono font
+  * altos/draw: Rearrange sample LCO screen in draw-test
+  * altos/draw: use --gc-sections in demo program
+  * altos/draw: Mock up TeleLCO boot sequence
+  * altos/draw: Rename test app to 'lco-test'
+  * altos/draw: Add validation for line drawing
+  * altos/draw: Check for horiz/vert line when clipping
+  * altos/draw: Fix clipping far line end
+  * altos/draw: Inline span fill for polygons
+  * altos/draw: Split out draw test scaffolding from lco-test.c
+  * altos/draw: Add line test app
+  * altos/draw: Use fewer fonts in lco sample
+  * altos/draw: hand-edit 64-pixel 3/5 to avoid jank
+  * altos/draw: Add damage tracking
+  * altos/draw: Add vera sans fonts
+  * altos/draw: Use <> for include files
+  * altos/draw: Use bitstream fonts for LCO demo
+  * altos/draw: Use damage for lco demo
+  * altos: Allow ports to use type other than 'void *' for gpio block
+  * altos/lpc: Support UART on pio1_13/pio1_14
+  * altos: Add TeleGPS v3.0 support
+  * altos: Build TeleGPS v3.0 by default
+  * altos/lpc: Add support for eeprom on 2x/3x chips
+  * altos/telegps-v3.0: Use eeprom for config
+  * altos/lpc: Validate UART pin config
+  * altos/lpcxpresso: Update for 11u24 board
+  * altos/telegps-v3.0: Fix SPI bus usage
+  * altoslib: Support TeleGPS v3 monitor idle
+  * altoslib: Parse more GPS monitor data
+  * altos/drivers: Support uBlox Max 10 chips
+  * altos: Dump GPS dop/course data from 'g' command
+  * altos/telegps-v3.0: Use new MAX 10 support in uBlox driver
+  * altos: Make sure storage is setup before starting log
+  * altos/lpc: Support 6k ram targets
+  * altos/telegps-v3.0: Use all 6kB of available ram
+  * altos/telegps-v3.0: Get LED blinking when GPS locks
+  * telegps: Add unit setting to device configuration dialog
+  * altos/stmf0: Remove some incorrect defines in stm32f0.h
+  * altos/stm32f04x: Smite the OPL_LAUNCH bit to reset boot config
+  * Version 1.9.15.1
+  * doc: Add 1.9.16 release notes
+  * Add TeleGPS v3.0 firmware
+  * altosdroid: Deal with Google requiring API version 31
+  * Version 1.9.16
+
+  [ Bdale Garbee ]
+  * add production scripts for TeleGPS v3.0
+  * update TeleGPS v3.0 production script to flash correct firmware versions
+  * updte ChangeLog for 1.9.16 release
+
+ -- Bdale Garbee <bdale@gag.com>  Thu, 27 Apr 2023 23:55:05 -0600
+
+altos (1.9.15-1) unstable; urgency=medium
+
+  [ Keith Packard ]
+  * altos: Add .gitignore for telemega v6.0
+  * altos/telemega-v6: Remove beep freq defs and use defaults
+  * altos/telemega-v6.0: bmi088 axes were wrong
+  * altoslib: Hide internals of AltosIMU
+  * altos: Fix TMega v6.0 and v5.0 IMU axes
+  * doc: Add initial 1.9.15 release notes
+  * doc: Add HW specs for TeleMega v6.0
+  * Add TeleMega v6.0 firmware to release
+  * Add TeleMetrum v4.0 firmware to releases
+  * altos/telemetrum-v4.0: Add .gitignore
+  * doc: Add TeleMetrum v4.0 to specs and 1.9.15 release notes
+  * ao-tools/ao-flash: Use 'program' instead of 'flash' for samd21
+  * Version 1.9.15
+
+  [ Bdale Garbee ]
+  * altos: add csm84clio-v0.1 firmware
+  * altos: re-number csm85clio outputs 0..49 to match schematic and silkscreen
+  * ao-bringup: turnon and test scripts for TeleMetrum v4.0 & TeleMega v6.0
+  * releasing 1.9.15
+
+ -- Bdale Garbee <bdale@gag.com>  Sun, 19 Feb 2023 18:29:00 -0700
+
+altos (1.9.14-1) unstable; urgency=medium
+
+  [ Keith Packard ]
+  * drivers/cc1200: Don't disable cc1200 interrupts ever
+  * altos/telefiretwo-v0.2: Get things building again
+  * altos/drivers: Use spi duplex to fetch register values
+  * altos/drivers: Increase LCO receive timeout to 20ms
+  * doc: Release notes for 1.9.14
+  * Version 1.9.14
+
+  [ Bdale Garbee ]
+  * ChangeLog for releas 1.9.14
+
+ -- Bdale Garbee <bdale@gag.com>  Thu, 02 Feb 2023 12:55:20 -0700
+
+altos (1.9.13-2) unstable; urgency=medium
+
+  * drop the suggests on slim | gdm, it's just no useful
+
+ -- Bdale Garbee <bdale@gag.com>  Sun, 29 Jan 2023 15:11:04 -0700
+
+altos (1.9.13-1) unstable; urgency=medium
+
+  [ Keith Packard ]
+  * altos: Switch LED pin number to 8 bits
+  * altos: Use -ffunction-sections -fdata-sections
+  * altos: Add SAMD21 bits
+  * altos: Add sample samd21 application for snekboard
+  * ao-tools: Add ao-flash-samd21 script
+  * altos/samd21: Add register definitions
+  * altos/samd21: Get USB driver working in AltOS
+  * altos/samd21: Automatically erase flash when writing
+  * altos/snekboard: Indicate that USB is used for stdio
+  * altos: Switch LED pin number to 8 bits
+  * altos: Use --gc-sections
+  * altos: Add SAMD21 bits
+  * altos: Add sample samd21 application for snekboard
+  * ao-tools: Add ao-flash-samd21 script
+  * altos/samd21: Add register definitions
+  * altos/samd21: Get USB driver working in AltOS
+  * altos/samd21: Automatically erase flash when writing
+  * altos/snekboard: Indicate that USB is used for stdio
+  * Add option to beep max height in feet rather than just meters
+  * altos: Get SAMD21 SPI driver working in non-DMA mode
+  * snekboard: Add samd21 SPI test function
+  * This is what I'm using locally for flashing samd21 parts
+  * samd21: Configure ROM/RAM values per device and provide linker scripts for each
+  * altos: Add metro-m0 port for SAMD21G18 testing
+  * samd21: Fix up DMA driver
+  * samd21: Avoid divides in boot loader
+  * samd21: Fix value defines to be unsigned long
+  * samd21: Use DMA for SPI send
+  * snekboard: Need DMA for SPI now.
+  * samd21: Macro-ize the DMA register settings a bit
+  * samd21: Add ability to use arbitrary pin configs with SPI
+  * metro-m0: Configure on-board SPI flash part
+  * altos/ms5607: Use ao_gpio_set instead of stm_gpio_set
+  * samd21: Get ADC code compiling
+  * samd21: Add SPI configurations used by TM v4.0
+  * samd21: Get serial driver building
+  * altos/telemetrum-v4.0: Almost building
+  * samd21: Shrink default stack to 512 bytes
+  * samd21: Stub out exti code
+  * samd21: Stub out beep code
+  * altos/telemetrum-v4.0: It links
+  * samd21: Wire up pin interrupts
+  * metro-m0: Demo pin interrupts
+  * samd21: Get beep code working
+  * samd21: Move DMA channel defs to ao_dma_samd21.h
+  * samd21: Hook up AltOS timer functionality
+  * samd21: Hook up AltOS style ADC
+  * metro-m0: Hook up ADC sample from A pins
+  * telemetrum-v4.0: Add beeper and fix ADC defs
+  * telemetrum-v4.0: Remove unused file
+  * drivers/ublox: Clean up some debug mode code
+  * samd21: Leave serial RX interrupts enabled
+  * metro-m0: Add GPS support
+  * telemetrum-v4.0: Set USE_SERIAL_1_STDIN to 0
+  * telegps: Copy altosui 'beep feet' bits to telegps
+  * altos/ms5607: Use duplex for fetching data
+  * samd21: PA20 maps to SERCOM3.2 not SERCOM3.3
+  * samd21: Limit SPI baud value to 1
+  * samd21: Restore pin cfg when exti is disabled
+  * samd21: AO_SPI_0_PA04_PA05_PA06 is FUNC_D
+  * fixup for exti restore
+  * telemetrum-v4.0: MS5607 doesn't share SPI controller
+  * telemetrum-v4.0: Correct beeper configuration
+  * altos/cc1200: Simplify interrupt handling
+  * altos: Avoid modulus in task queue on parts without idiv
+  * samd21: Save interrupt pin status before enabling interrupts
+  * attiny, stm32l0: Note that these chips don't support spi duplex
+  * altos: Add ao_gps_utc_tick
+  * altos/ms5607: Fixup ms5607 changes for other chips
+  * altos: Make sure APRS packets are reasonably separated
+  * altos: Enable telemetrum telemetry for telemetrum v4.0
+  * altoslib: Handle TeleMetrum v4.0 in idle mode
+  * Add TeleMetrum v4.0 to release files
+  * ao-tools/ao-eeprom: Add support for TeleMega v5.0
+  * altoslib: Add notes about updating ao-eeprom for new product
+  * altos: Add timeout for MS5607 ADC conversion
+  * easymotor-v3.0: Use motor pressure to trigger data logging
+  * easymotor-v3.0: Clean up build bits
+  * altos/stm: Add ao_spi_put_pins for MS5607 driver
+  * altos/stmf0: Add ao_spi_put_pins for MS5067 driver
+  * altos: Add timeout in MS5607 get_sample code
+  * drivers: Add BMI088 driver
+  * altos: Add BMI088 test framework using Nucleo32 board for stm32f042
+  * altos: Add TeleMega v6.0
+  * doc: Update docs for asciidoctor-pdf version 2.x
+  * src/drivers: Ignore printf warnings in ao_aprs.c
+  * drivers: Add AO_LOG_NORMALIZED support to BMI088 command
+  * altos: Split AO_LOG_NORMALIZED support out in telemetry code
+  * ao-tools: Fix buffer overflow in lib/ao-hex.c
+  * ao-tools: Update ao-eeprom for TeleMega v6
+  * altoslib: Add TeleMega v6 support
+  * altos/telelco: Add some debug aids for TeleLCO event stuff
+  * easymotor-v3: Fix pressure to adc conversion to use reference voltage
+  * altos/easymotor: Move pressure conversion code to ao_motor_flight.c
+  * altos: Add makefiles for telemega v6
+  * doc: Add release notes for 1.9.13
+  * doc: Update copyright year to 2023
+  * Version 1.9.13
+  * Disable TM v4.0 firmware for 1.9.13
+  * doc: Add release notes for 1.9.13
+  * doc: Update copyright year to 2023
+  * Version 1.9.13
+
+  [ Bdale Garbee ]
+  * first stab at support for TeleMetrum v4.0
+  * update Releasing with tweaks made during 1.9.12 release process
+  * easymini v3.0 production scripts working
+  * EasyMotor v3 production script working, sans pressure input test
+  * ao-tools: don't do 'm 0' after 'E 0' since EasyMotor doesn't support it
+  * update Releasing to include EasyMini v3.0 loader
+  * ao-tools: new ao-test-pressure utility for bench testing EasyMotor
+  * ao-bringup: final production test script for EasyMotor v3
+  * ao-tools: increase robustness of turnon_easymotor
+  * TeleMetrum v4.0 work in progress
+  * altosui: force Locale.ROOT during CSV export to avoid commas in decimals
+  * ao-tools: return ao-flash-lpc operaton to "full speed"
+  * doc: add a warning to TeleLaunch docs about siren volume levels
+  * doc: add a link to a reference on ARES/RACES use of PowerPole connectors
+  * doc: update EasyMotor behavior description for firmware 1.9.13 and later
+  * doc: update EasyMotor behavior description for firmware 1.9.13 and later
+  * releasing 1.9.13
+
+ -- Bdale Garbee <bdale@gag.com>  Thu, 19 Jan 2023 22:59:20 -0700
+
+altos (1.9.12-1) unstable; urgency=medium
+
+  [ Bdale Garbee ]
+  * need to save .bin for TeleGPS v2.0
+  * first cut at EasyMotor v3 support
+  * a few config tweaks
+  * get ram usage under control, etc
+  * Revert "adxl375: Disable spi duplex"
+  * fix SPI index definition
+  * recognize EasyMotor-v3 too
+  * fix mailing list reference to use mailman3 path
+  * doc: additional improvements to motortest manual
+  * doc: include reference to Loki Research closures in motortest document
+  * fat: sign Windows installers with our new code signing certificate
+  * update Releasing to include reference to jsign as a release dependency
+  * updating changelog for 1.9.12 release
+
+  [ Keith Packard ]
+  * lpc: Make beeper timer configurable
+  * easymotor-v3: Configure beeper
+  * lpc: Stick magic value at 0x2fc to let us use PIO0_1
+  * lpc: Fix name of timer ioconf for pio0_1
+  * lpc: Fix name of timer ioconf constants
+  * lpc: Fixes for timer configuration
+  * easymotor-v3: enable adxl debugging
+  * adxl375: Disable spi duplex
+  * lpc: Attempt to make beeper generate correct tone
+  * altos: Fix ADXL375 SPI mode definitions and usage
+  * Disable adxl debug, set long delay
+  * reduce adxl speed to 100kHz
+  * lpc: Add SPI mode support. Use for ADXL375 on easymotor
+  * easymotor-v3: Increase ADXL spi speed back to normal, remove delay
+  * lpc: Shuffle more bits around for flash loader
+  * altos: Add EasyMotor-v3.0 to regular builds
+  * ao-eeprom: Add EasyMotor decode
+  * altoslib: Replace EasyMotor v2 code with v3
+  * ao-eeprom: Add easy motor support
+  * altos: Document easymotor record length
+  * doc: Update call sign
+  * ao-elftohex: Allow multiple elf files to be merged together
+  * easymini-v3.0: Create combined .ihx file for testing
+  * ao-elftohex: Add '-n' option to elide symbol table from output
+  * easymini: Elide symbols from combined .ihx file
+  * altos: Increase AES IV buffer to hold maximum AES state
+  * altos: Allow setting telemetry interval to zero without crashing
+  * Add EasyMini v3.0 firmware to release
+  * ao-eeprom: Handle merge conflict from easymotor-v3 branch
+  * easymotor-v3: Fix beeper config
+  * altos: Allow 'c a 0' without Syntax Error
+  * altoslib: Map log format back to USB device id
+  * altosuilib: Limit EasyMotor graphs to motor pressure and accel by default
+  * doc: Add specs for EasyMini v3 and EasyMotor v3
+  * doc: Add preliminary 1.9.12 release notes
+  * Add EasyMotor v3 firmware to release
+  * altosui: Ship motortest.pdf with packaged builds
+  * altosuilib: Remove some debug printfs
+  * Auto-detect windows signing stuff
+  * Version 1.9.12
+
+ -- Bdale Garbee <bdale@gag.com>  Fri, 28 Oct 2022 23:12:21 -0600
+
+altos (1.9.11-2) unstable; urgency=medium
+
+  * cherry pick patch from master that increases AES IV buffer to hold 
+    maximum AES state, closes: #1022301
+
+ -- Bdale Garbee <bdale@gag.com>  Mon, 24 Oct 2022 10:02:35 -0600
+
+altos (1.9.11-1) unstable; urgency=medium
+
+  [ Bdale Garbee ]
+  * capture odd changes from production machine?
+  * fix version in 1.9.10 release notes
+  * fix version in 1.9.10 release notes
+  * need to capture .bin file for telebt loader, too
+  * doc: add an appendix on frequency calibration to the all-in-one manual
+  * need to capture .bin file for telebt loader, too
+  * need to save .bin for TeleGPS v2.0
+  * dial it down a bit more to not exceed +10 dBm, or 10 mW
+  * use correct test script for v1.0 easymega
+  * doc: add an appendix with examples for configurable pyro channels
+  * releasing 1.9.11
+
+  [ Keith Packard ]
+  * altosdroid: Skip map draw before transform is set
+  * altosdroid: Fix tab updates on Android 11 after rotate
+  * Version 1.9.10.1
+  * micropeak: detect empty log received from device
+  * ao-tools/ao-test-igniter: Deal with devices that use both 'apogee' for ADC
+  * altos/attiny: Switch to avrisp2 for development programmer
+  * altos: Switch all tick variables to AO_TICK_TYPE/AO_TICK_SIGNED
+  * altosdroid: Add BLUETOOTH_CONNECT permission, handle its lack
+  * Version 1.9.10.2
+  * data_interval == 0 means no data collection
+  * altos: AES code was storing bytes in an int array
+  * ao_pyro: Move delay_done out of pyro structure
+  * Switch from AdoptOpenJDK to Adoptium
+  * libaltos: Build Mac OSX libaltos.dylib for arm64 too
+  * Version 1.9.10.3
+  * altos: Re-enable apogee delay
+  * altos/attiny: Eliminate warnings from -Wconversion
+  * altos/drivers: Add explicit casts in ao_aprs, ao_bmx160 and ao_btm
+  * altos/drivers/ao_button: Save all 32-bits of irq status
+  * drivers: Fix type of radio timeout parameter
+  * ao_gps_skytrac, ao_gps_ublox: Add explicit casts to quiet -Wconversion
+  * ao_companion: Make time conversion to 16-bits in companion protocol explicit
+  * ao_hmc5883: Add explicit casts for -Wconversion
+  * drivers/ao_lco: Fix box types to be uint16_t. Also clean other -Wconversion messages
+  * drivers: Resolve -Wconversion in m25, mma655x, mmc5983, mpu and ms5607
+  * drivers/ao_packet: Switch time values to AO_TICK_TYPE
+  * drivers/ao_pad: Convert from/to 16-bit times over the air
+  * drivers/ao_quadrature: Fix -Wconversion warnings
+  * drivers/ao_rn4678: Fix timeouts to use AO_TICK_TYPE
+  * altos: Switch ao_radio_recv timeout to AO_TICK_TYPE
+  * altos/ao_stdio: use uint8_t for stdio index
+  * altos/ao_freq: Use uint32_t for radio freq setting value
+  * beep, cmd, config, convert_volt, data, distance, fec, kalman: -Wconversion warnings
+  * fifo: Add casts to fifo operation macros for -Wconversion
+  * ao_companion: Make motor_number uint16_t
+  * ao_convert_pa: Switch array index to unsigned type
+  * ao_flight: ao_interval_end type was too small, could cause premature landing state
+  * ao_gps, ao_log: Make conversions to 16-bit time log values explicit
+  * ao_log: Change flight type to uint16_t, widen APIs dealing with flight numbers to int32_t
+  * more 16-bit log tick values
+  * ao_log: Fix sensor time triggers to use AO_TICK_TYPE
+  * ao_log: Add casts to reduce -Wconversion warnings
+  * ao_micro: Add casts to micropeak code for -Wconversion warnings
+  * ao_radio_cmac: Make recv timeouts AO_TICK_TYPE
+  * ao_radio_cmac_cmd: Clean up types for -Wconversion
+  * ao_monitor: Clean up -Wconversion warnings
+  * kalman, report, romconfig, sample, send_packet: Clean up -Wconversion warnings
+  * ao_serial: Change serial_sleep_for APIs to use AO_TICK_TYPE
+  * ao_task: Task ids are 8-bits, fix type in struct ao_task
+  * ao_telemetry: Switch time variables to AO_TICK_TYPE
+  * ao_telemetry: Use int16_t types for telemetry packet intervals
+  * ao_telemetry: Add casts to reduce -Wconversion warnings
+  * ao_tracker: Fix tracker_interval type to match config type (plus -Wconversion)
+  * altos/lpc: Add casts to reduce -Wconversion warnings
+  * altos/micropeak-v2.0: Add casts to reduce -Wconversion warnings
+  * ao_flash_task: Add casts to reduce -Wconversion warnings
+  * ao_micropeak.c: Add casts to reduce -Wconversion warnings
+  * altos/stm: Add casts to reduce -Wconversion warnings
+  * altos/stm32l0: Add casts to reduce -Wconversion warnings
+  * altos/stmf0: Add casts to reduce -Wconversion warnings. Use AO_TICK_TYPE
+  * altos/telefire: Add cast to AO_LED_CONTINUITY to eliminate -Wconversion warning
+  * telefireone-v1.0: Use a boolean value for ao_log_running
+  * ao_lco_v2: Use int32_t for temporary box value in step_box
+  * ao_lco_v2: Add casts to reduce -Wconversion warnings
+  * altos/telemega-v5.0: Add casts to beep values
+  * altos: Add -Wconversion
+  * altos: Deal with 8-character version numbers
+  * altos: Document how delay_done is used in ao_pyro.c
+  * Version 1.9.10.4
+  * Allow TX power to be limited to 10mW
+  * ao-telem: Read from stdin if no filenames
+  * telegps-v0.3: Reduce stack size to fit in ram
+  * ao-tools/ao-eeprom: Dump converted info for F packets
+  * lpc: ADC 5 was busted
+  * lpc: Make beeper configurable
+  * src: Add easymini-v3.0
+  * doc: Document 10mw limit configuration
+  * doc: Add release notes for 1.9.11
+  * doc: Update copyrights to 2022
+  * Version 1.9.11
+
+ -- Bdale Garbee <bdale@gag.com>  Sun, 29 May 2022 21:09:27 -0600
+
+altos (1.9.10-1) unstable; urgency=medium
+
+  [ Keith Packard ]
+  * libaltos: Make windows dlls reproducible
+  * libaltos: Use original windows printf/scanf
+  * Version 1.9.9.1
+  * altosdroid: Switch storage to media dir
+  * altoslib: Add callback from AltosLog on file open failure
+  * altosdroid: Catch log file open failures and show an error dialog
+  * doc: Version 1.9.10 notes
+  * altos/telemega-v5.0: Add .gitignore
+  * Version 1.9.10
+
+  [ Bdale Garbee ]
+  * update to latest policy and debhelper versions
+  * releasing 1.9.10
+
+ -- Bdale Garbee <bdale@gag.com>  Sun, 10 Oct 2021 21:44:54 -0600
+
+altos (1.9.9-1) unstable; urgency=medium
+
+  [ Bdale Garbee ]
+  * capture updates to Releasing from 1.9.8 release
+  * update TeleMega bench scripts for v5.0 hardware
+  * snapshot TeleMega v4 turnon and test scripts before crafting v5 versions
+  * libaltos: don't carry pre-built .dll files in the repo any more
+  * releasing 1.9.9
+
+  [ Keith Packard ]
+  * altosdroid: Set android version to 30
+  * Remind us to update ANDROID_VERSION
+  * altos: Fix config upgrade from 1.24 to 1.25
+  * altoslib: Parse TeleMega v5.0 eeprom records
+  * altos: Measure mmc5983 offset
+  * 1.9.9 release notes
+  * Version 1.9.9
+
+ -- Bdale Garbee <bdale@gag.com>  Thu, 07 Oct 2021 00:01:59 -0600
+
+altos (1.9.8-1) unstable; urgency=medium
+
+  [ Keith Packard ]
+  * altosdroid: Work without GPS available
+  * altosuilib: Remove spurious message about libaltos
+  * kernel: Widen pyro time values to 32 bits
+  * doc: telemini force freq is pin 6, not 7
+  * altosdroid: Show altitude as well as height
+  * libaltos: Use cross compilers to build libaltos for i686, amd64, aarch64, armel and armhf
+  * ao-bringup: Revert EasyMini scripts to 1.0
+  * altos: Fixes for GCC 10 (-fno-common is default)
+  * ao-test-igniter: Also test ADC voltage for in-range of 1-4 volts
+  * ao-bringup: Use ao-test-igniter voltage check feature in pyro tests
+  * altos: Add preliminary TeleMega v5.0 bits
+  * altos: Add MMC5983 driver
+  * altos: Change MMC5893 driver to avoid interrupts
+  * libaltos: Add new microchip MAC address to bluetooth map
+  * micropeak: Show error message if USB adapter open fails
+  * altos: Prepare for picolibc stdio change
+  * telemega-v5.0: Add Makefiles
+  * Show mag sensor SPI ID
+  * altos: Fix telemega v5.0 CS_FLASH pin
+  * altos: Record MPU6000 failure but let device boot
+  * altos/stm: Use picolibc startup code
+  * altos: Add bit-bang i2c driver
+  * altos: Get MMC5983 driver working
+  * altos/stm: Minor cleanups in ao_arch_funcs.h
+  * altos/telemega-v5.0: Fix config for MMC5983
+  * altos: Detect CC120X device type
+  * altos: Support normalized axes in mpu6000 and mmc5983
+  * altos: Allow devices to override default beep
+  * altos: Support normalized log
+  * altos: Add normalized telemetry support
+  * altos: Update telemega-v5.0 config
+  * altoslib: Support TeleMega v5.0
+  * altosui: Add options for low frequency beeper
+  * altos: Fix up HAS_FLIGHT_DEBUG
+  * altos: Allow beep tone spacing to be changed
+  * altos/telemega-v5.0: Space tones closer together
+  * altos: Build TeleMega v5.0 bits
+  * Add TeleMega v5.0 firmware
+  * altosdroid: Add tilt angle to pad and flight tabs
+  * libaltos: Update windows DLLs
+  * Bump version to 1.9.7.1
+  * altos: Deal with cc1201 limitations
+  * altos: All beep-enabled boards have beep config
+  * Add test-easymini-v1.0 script
+  * altoslib: Document how to add a new product
+  * libaltos: Ignore cjnitest files for all targets
+  * doc: Note pyro channel time limits on <1.9.8 firmware
+  * doc: Add specs for TeleMega v5.0
+  * doc: Update for 1.9.8
+  * Version 1.9.8
+
+  [ Bdale Garbee ]
+  * doc: add mounting hole spacing information to product outlines
+  * debian: add --disable-multi-arch to configure
+  * update ChangeLog for 1.9.8 release
+
+ -- Keith Packard <keithp@keithp.com>  Mon, 20 Sep 2021 21:30:49 -0600
+
+altos (1.9.7-2) unstable; urgency=medium
+
+  * pull in fix from master branch for gcc-10 compilation, closes: #991800
+
+ -- Bdale Garbee <bdale@gag.com>  Tue, 03 Aug 2021 09:44:09 -0600
+
+altos (1.9.7-1) unstable; urgency=medium
+
+  [ Keith Packard ]
+  * Update 1.9.6 release date. Add note to Releasing about date
+  * libaltos: Add windows override for EasyTimer USB ID
+  * altos: Make accel cal take three axes when present
+  * altoslib: Set all 3 axes of accel cal data when present
+  * altoslib, altosuilib: Get Idle Monitor working with EasyTimer and EasyMotor
+  * altosui: Match against basestations when determining remote
+  * altos/easymotor-v2: Increase default flight log size
+  * altos/easytimer-v1: Switch from including adxl375 to bmx160
+  * altoslib, altosui: Don't show apogee/main for EasyTimer Fire Igniter
+  * altos: Don't wait after igniter in manual mode
+  * ao-bringup: Delay before testing easymini for 0.25 seconds
+  * altoslib: Avoid sending negative accel cal values to flight computer
+  * altoslib: Fix accel inversion for TeleMega v4.0
+  * altoslib: Delay accel cal value adjustment until data all read
+  * Version 1.9.6.1
+  * altos: Add 'microtest' -- micropeak load for testing µPusb
+  * ao-tools/ao-dump-up: Recognize MicroTest data
+  * altoslib: Add all known launch sites and names to map preload
+  * micropeak: Use a menu for 'Download' on Mac OS X
+  * altosui: Show dialog box if sudo fails on Mac OS X
+  * micropeak: Stick docs in Doc dir on Mac OS X
+  * altosui: open /Library/AltusMetrum on Mac OS X after install
+  * Version 1.9.6.2
+  * altosuilib: Show launch sites at all visible locations on map
+  * Add Mac OS X 11 support to JavaApplicationStub
+  * Update JavaApplicationStub to latest release
+  * Add local hacks to JavaApplicationStub
+  * JavaApplicationStub hacks for Big Sur tabbing mode
+  * Version 1.9.6.4
+  * altoslib: Write IMU headers to CSV file when present
+  * doc: Fix typography in motortest doc
+  * Version 1.9.7
+  * doc: Update for 1.9.7
+  * altos/telegps-*: Fix log end discovery at startup
+  * altos: Simplify discovery of log end position
+  * Update 1.9.6 release date. Add note to Releasing about date
+  * libaltos: Add windows override for EasyTimer USB ID
+  * altos: Make accel cal take three axes when present
+  * altoslib: Set all 3 axes of accel cal data when present
+  * altoslib, altosuilib: Get Idle Monitor working with EasyTimer and EasyMotor
+  * altosui: Match against basestations when determining remote
+  * altos/easymotor-v2: Increase default flight log size
+  * altos/easytimer-v1: Switch from including adxl375 to bmx160
+  * altoslib, altosui: Don't show apogee/main for EasyTimer Fire Igniter
+  * altos: Don't wait after igniter in manual mode
+  * ao-bringup: Delay before testing easymini for 0.25 seconds
+  * altoslib: Avoid sending negative accel cal values to flight computer
+  * altoslib: Fix accel inversion for TeleMega v4.0
+  * altoslib: Delay accel cal value adjustment until data all read
+  * Version 1.9.6.1
+  * altos: Add 'microtest' -- micropeak load for testing µPusb
+  * ao-tools/ao-dump-up: Recognize MicroTest data
+  * altoslib: Add all known launch sites and names to map preload
+  * micropeak: Use a menu for 'Download' on Mac OS X
+  * altosui: Show dialog box if sudo fails on Mac OS X
+  * micropeak: Stick docs in Doc dir on Mac OS X
+  * altosui: open /Library/AltusMetrum on Mac OS X after install
+  * Version 1.9.6.2
+  * altosuilib: Show launch sites at all visible locations on map
+  * Add Mac OS X 11 support to JavaApplicationStub
+  * Update JavaApplicationStub to latest release
+  * Add local hacks to JavaApplicationStub
+  * JavaApplicationStub hacks for Big Sur tabbing mode
+  * Version 1.9.6.4
+  * altoslib: Write IMU headers to CSV file when present
+  * doc: Fix typography in motortest doc
+  * Version 1.9.7
+  * doc: Update for 1.9.7
+  * altos/telegps-*: Fix log end discovery at startup
+  * altos: Simplify discovery of log end position
+  * altosuilib: Zap all flash when upgrading TeleGPS from pre-1.9.7
+  * altoslib: Fix accel value flipping for TM v3.0
+  * altosdroid: Skip clicks on BT device entries that are too short
+  * altosdroid: Safeguard preferences code in case it's called too early
+  * altosdroid: Synchronize access to the 'rockets' list for online maps
+  * altosdroid: protect USB read/write when connection is null
+  * altosdroid: Don't start bluetooth if address is null
+  * altoslib: Protect has_monitor_battery from unset product
+  * Version 1.9.6.5
+  * altosdroid: Revert getResource().getColor to old API
+  * altosdroid: Update target API to 29
+  * altosdroid: Bump to version 29
+  * doc: Update 1.9.7 release notes
+  * Version 1.9.7
+
+  [ Bdale Garbee ]
+  * TeleLaunch docs use telelaunch.txt, update copyright year, lose "draft"
+  * put notes in Releasing about keeping doc/header.inc up to date
+  * doc: add documentation on how to re-flash a TeleMini v3 over USB
+  * doc: first draft of manual for EasyMotor
+  * doc: add a brief note about TeleBT appearing inert until paired
+  * doc: make doc be about motor testing in general, not just EasyMotor
+  * doc: make doc be about motor testing in general, not just EasyMotor
+  * doc: have motortest documents actually get built by default
+  * doc: add motortest docs to publish targets
+  * docs: minor text tweak in motor testing docs
+  * altos: include EasyMotor v2 firmware in upcoming release
+  * ao-tools: update ao-flash-stm32f0x to work with openocd in Debian unstable
+  * ao-bringup: add tools for flash/cal/test of EasyMotor v2
+  * ao-bringup: fix easymotor script to use .bin for dfu-util
+  * TeleLaunch docs use telelaunch.txt, update copyright year, lose "draft"
+  * put notes in Releasing about keeping doc/header.inc up to date
+  * doc: add documentation on how to re-flash a TeleMini v3 over USB
+  * doc: first draft of manual for EasyMotor
+  * doc: add a brief note about TeleBT appearing inert until paired
+  * doc: make doc be about motor testing in general, not just EasyMotor
+  * doc: make doc be about motor testing in general, not just EasyMotor
+  * doc: have motortest documents actually get built by default
+  * doc: add motortest docs to publish targets
+  * docs: minor text tweak in motor testing docs
+  * altos: include EasyMotor v2 firmware in upcoming release
+  * ao-tools: update ao-flash-stm32f0x to work with openocd in Debian unstable
+  * ao-bringup: add tools for flash/cal/test of EasyMotor v2
+  * ao-bringup: fix easymotor script to use .bin for dfu-util
+  * doc: update copyright year assertions
+  * update ChangeLog for 1.9.7 release
+
+ -- Bdale Garbee <bdale@gag.com>  Tue, 08 Jun 2021 23:10:20 -0600
+
+altos (1.9.6-1) unstable; urgency=medium
+
+  [ Bdale Garbee ]
+  * Releasing: updated with changes from 1.9.5 release
+  * first cut at EasyMotor v2 .. not compiling yet
+  * easymotor: override .gitignore to store Makefiles
+  * recover easymotor-v2/flash-loader/ao_pins.h from backups
+  * update configure.ac for 1.9.6 release
+  * releaseing 1.9.6
+
+  [ Keith Packard ]
+  * altos: Remove linker map files during 'make clean'
+  * altos: Fix flash loader map file names
+  * altosui: Include telelco and telefireeight firmware in FAT builds
+  * libaltos: Avoid using strcmp and strchr on windows
+  * altos/drivers: Add ao_adxl375_accel_to_sample macro
+  * altos: Allow use of ADXL375 as IMU
+  * altos: Add EasyMotor logging support
+  * altos: Support accel-only IMU configurations
+  * altos/stmf0: Add spi format configuration options
+  * altos/easymotor-v2: Add .gitignore
+  * altos/easymotor-v2: Get easy motor building
+  * altos/easymotor-v2: Use same init order as easymini
+  * altos/easymotor-v2: Fix beeper config
+  * altos/stmf0: Fixup for SPI mode support
+  * altos/easymotor-v2: ADXL375 is upside-down compared with other boards
+  * altos/easymotor-v2: Beep out 'pad mode' repeatedly
+  * altos: Let ao_data.c be used by ao_flight_test
+  * altos/test: Build ao_flight_test_motor
+  * altos/easymotor-v2: Add 'through' axis definition
+  * altos: Change adxl375 self test parameters
+  * altos: De-bias height/speed data while on pad
+  * altos: Log motor pressure and battery voltage for EasyMotor
+  * altos/test: Clean up easy motor test jig
+  * altos: Support negative decimal values on command line
+  * altos: Add motor pressure calibration data to easy motor log
+  * altos: Reset 3d-accel and motor pressure sums each ground interval
+  * altoslib: Initialize gyro offset values to MISSING
+  * altoslib: Add conversion for motor pressure sensor
+  * altoslib: Add 'motor_pressure' data value
+  * altosuilib: Graph motor pressure
+  * altoslib: Add EasyMotor EEPROM support
+  * altoslib: Report metric pressure in kPa instead of Pa
+  * altoslib: use motor pressure calibration data for EasyMotor
+  * altoslib: Correct ADXL counts_per_g
+  * altoslib: Easy Motor v2 x axis is inverted
+  * altoslib: Limit .csv file output to valid fields for EasyMotor
+  * altoslib: Clip accelerometer-based speed to >= 0
+  * altoslib: Add defines for EasyMotor
+  * altoslib: Don't pass along GPS information when the GPS device is busted
+  * doc: 1.9.6 release notes
+  * libaltos: Add pre-built windows dll binaries
+  * doc: Mention BMX-160 self-test fix in 1.9.6 release notes
+
+ -- Bdale Garbee <bdale@gag.com>  Thu, 22 Oct 2020 16:20:59 -0600
+
+altos (1.9.5-1) unstable; urgency=medium
+
+  [ Keith Packard ]
+  * altosui: Spurious ; in altos-windows.nsi.in kept out TM v3.0 ihx
+  * Add support for TLS if needed
+  * Releasing: save .map files too
+  * altos: Use state transitions to directly drive igniters
+  * altos: Add 'booster' mode for dual-deploy igniters
+  * altos/stm: Increase MISO DMA priority to very high
+  * altos: Protect shared storage_data with mutex
+  * altos: Support flash parts > 8MB
+  * altos: Use new ao_spi_speed inline to set SPI speeds using spec'd frequencies
+  * altosui: Re-set pad orientation labels after product name is set
+  * altos/stmf0, stm32f0: Call ao_boot_chain to start application
+  * altos/stm: Fix stack validation code
+  * altos: Fix a bunch of time variables to be AO_TICK_TYPE
+  * altos: Add initial stm32l0 support
+  * altos: Switch micropeak v2.0 to stm32l0
+  * altos: Declare ao_delay_until API in ao.h
+  * altos: Move empty ao_mutex_get/put to ao_notask.h
+  * altos: Add ao_delay_until to ao_notask
+  * remove ao_delay_until from ao.h
+  * altos/ao_storage: allow erased byte value to be set by application
+  * altos/ao_storage: Allow apps to #define storage parameters
+  * altos: Micropeak v2.0 doesn't have a flash loader anymore
+  * altos/stm32l0: More DMA fixes
+  * altos/stm32l0: Some device addrs were wrong
+  * altos/stm32l0: Get SPI driver working
+  * altos/stm32l0: Get exti working
+  * altos/stm32l0: Remove some unused code in USART driver
+  * altos/stm32l0: Remove some unused code in ao_timer.c
+  * altos/stm32l0: Add adc and flash drivers
+  * altos/micropeak-v2.0: Finish hardware bring-up
+  * altos/stm32l0: Provide ao_spi_speed inline as per new clocking API
+  * altos/stm32l0: Add LPUART driver
+  * altos: add noreturn attribute to ao_panic
+  * ao-tools: Add TeleGPS log parsing to ao-eeprom
+  * altos: Remove ao_led_toggle API from general code
+  * altos: Remove support for !HAS_TASK_QUEUE
+  * altos/stm32l0: Big update in functionality
+  * altos: Add MicroPeak v2.0 support to ao_log_micro
+  * altos/micropeak-v2.0: Functionally complete.
+  * altos/mpusb-v3.0: Make this build again
+  * micropeak: Check for empty data when fetching log
+  * micropeak: Fix top-level window building
+  * micropeak: Add support for MicroPeak v2.0
+  * altos: Don't report inhibited pyro channels as fired
+  * altos: Allow multiple manual firing of main/drogue channels
+  * altoslib: Don't fetch config data for every idle status
+  * altoslib: Flush output when disabling remote
+  * altoslib: Improve configuration performance over remote link
+  * altosui: Improve configuration save feedback
+  * doc: Fix spelling error in updating-firmware section.
+  * altoslib: Deal with reflashing EasyMega boards with ancient firmware
+  * altosuilib: Allow config to be missing in rom config dialog
+  * libaltos: Map generic windows device names to actual names
+  * altoslib: Set default logging directory to $HOME/AltusMetrum
+  * macosx: Hack JavaApplicationStub to set freetype properties
+  * windows: Point windows users at adoptopenjdk.net by default
+  * altosuilib: Make dialogs mostly scrollable
+  * macosx: Update macosx install script
+  * libaltos: Update to support Mac OS X 10.15 (catalina)
+  * altoslib: Print more helpful debug messages when checking rom version
+  * doc: Add 1.9.5 release notes
+  * altosdroid: Copy generated .apks to bin directory
+  * altosui: Work around lack of actual USB product names on Windows
+  * Version 1.9.5
+
+  [ Bdale Garbee ]
+  * ao-bringup: ensure TeleMega turnon scripts are using the right test versions
+  * doc: EasyMotor and EasyTimer have the same mounting geometry as EasyMini
+  * fix broken TeleBT turnon script
+  * docs: fix horrible typo in TeleLaunch configuration section
+  * docs: add explicit admonition about avoiding 'c f' when configuring TeleLaunch
+  * debian: stop delivering gdm and slim theme materials, since we don't use them
+  * releasing 1.9.5
+
+ -- Bdale Garbee <bdale@gag.com>  Wed, 30 Sep 2020 00:19:56 -0600
+
+altos (1.9.4-2) unstable; urgency=medium
+
+  * eliminate old explicit run-time dep on libjson-c4, closes: #966562
+
+ -- Bdale Garbee <bdale@gag.com>  Wed, 05 Aug 2020 11:27:40 -0600
+
+altos (1.9.4-1) unstable; urgency=medium
+
+  [ Bdale Garbee ]
+  * ao-bringup: first cut at turn-on scripts for EasyTimer v1
+  * releasing 1.9.4
+
+  [ Keith Packard ]
+  * Add telemetrum v3.0 firmware to release
+  * altos: Reduce flash temp buffer to make space for Em v1.0 ISR stack
+  * altos: Make AO_STORAGE_TEST use a separate buffer
+  * doc: Doc updates for 1.9.4
+  * Version 1.9.4
+
+ -- Bdale Garbee <bdale@gag.com>  Thu, 02 Jul 2020 20:22:56 -0600
+
+altos (1.9.3-1) unstable; urgency=medium
+
+  [ Keith Packard ]
+  * altos: add APRS 'offset' value to set APRS transmision time
+  * altoslib, altosui, telegps: Add configuration support for APRS offset
+  * doc: Document APRS offset configuration value
+  * doc: start release notes for 1.9.3
+  * map-server: Create Manifest.txt at build time
+  * altosui: Report baro ground alt for 'Pad Altitude' when GPS missing
+  * Start release notes for 1.9.4
+  * ao-tools: Use array indexing instead of addition to make gcc-10 happy
+  * ao-tools: Declare ao_verbose as extern in shared header.
+  * debian: Switch debian dependency to picolibc
+  * altos/stm: Make ao_eeprom_total a #define instead of a const variable
+  * Create map file for all programs
+  * altos/lpc: Add explicit defines for all register groups
+  * ignore .map files
+  * altos: Move from newlib-nano to picolibc
+  * Mark stm_interrupt_vector as const so it is READONLY
+  * ao-tools/ao-usbload: stubs in man page for missing options
+  * altos: Allow MPU9250 SPI speed to be set by application
+  * altos: Allow accel-only flight code
+  * altos: Allow igniter status beeping with only 'extra' channels
+  * altos: Allow BMX160 to be used as primary accel
+  * altos: Allow flight support without logging
+  * altos: Build easytimer-v1 by default
+  * altos: Fix ao_ignite.c to work without HAS_IGNITE
+  * easytimer-v1: Enable pyro commands
+  * altos: Initialize pyro code for easytimer-v1
+  * altoslib: Remember flight list in AltosConfigData
+  * altosui: Adjust max log setting for storage block size
+  * altos: Move ao_storage_erase to shared code. Add len
+  * altos: Round selected log size down to ao_storage_block multiple
+  * altos: Handle flight_log_max not being multiple of ao_storage_block
+  * altos: Leave accel data in ring raw; swap for orientation on fetch
+  * Add EasyTimer configuration support
+  * altoslib: Add EasyTimer idle monitor support
+  * Add some release note notes
+  * altoslib: Fix easytimer voltage conversions
+  * altosui: Remove six-axis pad orientation for easy timer
+  * altos: Don't include baro-specific config values for easytimer
+  * altos: Fix HAS_FLIGHT_DEBUG for easytimer
+  * doc: Avoid mis-interpretation of '+' in device wiring tables
+  * doc: Update for EasyTimer
+  * Check for picolibc when testing arm compilers
+  * Add EasyTimer firmware to packages and Releasing
+  * map-server: Manifest files are generated now
+  * altos/test: Ignore ao_flight_test_mini binary
+  * altos: Remove newlib-nano defines from Makedefs.in
+  * altos: Fix printf format mis-matches
+  * altos: Leave floating printf enabled on m3 devices
+  * Update 1.9.3 release notes
+  * doc: Update doc for 1.9.3
+  * Version 1.9.3
+
+  [ Bdale Garbee ]
+  * point turnon_telemetrum_v2 to correct test script for v2.0
+  * altos: add easytimer-v1 source directory
+  * releasing 1.9.3
+
+ -- Bdale Garbee <bdale@gag.com>  Mon, 15 Jun 2020 20:36:15 -0600
+
+altos (1.9.2-1) unstable; urgency=medium
+
+  [ Bdale Garbee ]
+  * Releasing: capture notes from 1.9.1 release
+  * Releasing: add TeleMetrum v3.0 firmware to production list
+  * doc: update copyright year in footers, note need to check this doc/RELNOTEs
+  * update info on using separate pyro batteries to encourage including a switch
+  * update TeleMega production scripts for v4.0
+  * include TeleMega v4 in list of firmware included in fat build and LLC repo
+  * update copyright assertion in TeleLaunch manual
+  * update ChangeLog for release 1.9.2
+
+  [ Keith Packard ]
+  * altos: Initial bits for TeleMega v4.0
+  * altos: Build TeleMega v4.0 bits
+  * altos: Use AO_TICK_TYPE/AO_TICK_SIGNED for lco/pad code
+  * altos: Make debug telemini firmware a bit easier to build
+  * altos: TeleMini beeper is on Tim2 CH4, not Tim3 CH4
+  * altos: Disable ao_btm debug. Avoids breaking 's' command
+  * altos: Always start application if boot pin isn't in use
+  * Generate altosdroid/app/build.gradle at configure time
+  * Force using opensdk-8 to build altosdroid
+  * Bump altosdroid version to 20, always build release apk
+  * Use 'must' instead of 'should' in reference to switch for pyro battery
+  * altosdroid: Switch to NotificationCompat
+  * altosdroid: Request fine location permission if not already granted
+  * altosdroid: Check if the telem service is running when bluetooth gets enabled
+  * Bump version to build a new android app -- 1.9.1c
+  * altosdroid: Add text size selection
+  * Bump version to build a new android app (23)
+  * altosdroid: Use custom dialog themes for all dialogs
+  * altosdroid: Fix a pile of compile warnings
+  * altosdroid: Change tracker selection dialog
+  * altosdroid: Ignore 'build.gradle', which is built from a .in file
+  * altosdroid: Add helper 'makefile'
+  * altosui: Set idle mode frequency before starting link
+  * altosdroid: When the user switches frequency, look for something there
+  * Bump version to build a new android app (25)
+  * altosdroid: Use select tracker dialog when deleting a tracker
+  * altosdroid: Make frequency changes during idle mode work
+  * altosdroid: Change layout of idle mode dialog a bit
+  * altoslib: Reset consecutive GPS count when GPS bad
+  * altos: Fix wiring mistakes for TeleMega v4.0
+  * altos: Add new telemetry packet format for TeleMega v4
+  * altos: Create new log format for TeleMega v4
+  * altoslib: Add 'gauss' units for magnetic field strength
+  * altosuilib: Add fourth column to info table
+  * altoslib: Store IMU accel ground data in converted values
+  * altoslib: Add support for TeleMega v4
+  * altoslib: Move 'state_name' API to AltosCalData
+  * altoslib: Report whether GPS data contains new location/sat info
+  * altoslib: Re-initialize cal data for eeprom record set
+  * altoslib: Report raw baro height instead of kalman filtered value
+  * altosuilib: Put units on GPS altitude and height in info table
+  * altoslib: Pass all flight records while reading telem file
+  * doc: updates for 1.9.2
+  * altosui: Add TeleMega v4.0 firmware to altosui packaged bits
+  * altosuilib: Eliminate a couple java compiler warnings
+  * Bump version for new android upload
+  * altos: Log BMX160 data when present
+  * altos: Copy BMX160 data to data ring
+  * altos: Get BMX160 initialized correctly
+  * altoslib: Remove ADXL375 debug noise
+  * ao-tools: Add TeleMega v4.0 to ao-eeprom
+  * altos: Init BMX160 more carefully
+  * altoslib: Correct IMU axes for telemetry data
+  * ao-tools: Handle TeleMega v4.0 telemetry in ao-telem
+  * altos: Adjust comment about how the BMX160 is oriented
+  * altos/altoslib: BMX160 Y axis gyro direction is opposite from MPU
+  * altoslib: Fix Tmega v4 eeprom parsing
+  * libaltos: Delay freeing serial device until not busy
+  * altoslib: Correct sign of telemega v4 pitch
+  * altoslib: Remove hard-coded accel scale for mega eeprom
+  * altosuilib, altoslib: Add azimuth and compass to reports
+  * altos/telemega-4.0: Fix signs of IMU pitch and mag across
+  * altos/bmx160: Compute µT in bmx160 driver using trim data
+  * altoslib: BMX160 driver now returns µT values for mag sensor
+  * Bump java lib versions in preparation for 1.9.2
+  * Set doc version and date from package version and release date
+  * Bump version to 1.9.2, android 27
+  * Bump java lib versions in preparation for 1.9.2
+  * altoslib: Add TeleMega-v4 adxl375 config to AltosConfigData
+  * Bump version to 1.9.2, android 27
+  * Set doc version and date from package version and release date
+  * Bump java lib versions in preparation for 1.9.2
+  * Bump version to 1.9.2, android 27
+  * altoslib: Remove debug printf from AltosIMU.java
+  * libaltos: Create altos_pause_one_second API
+  * Bump java lib versions in preparation for 1.9.2
+  * Bump version to 1.9.2, android 27
+
+ -- Bdale Garbee <bdale@gag.com>  Tue, 25 Feb 2020 23:58:43 -0700
+
+altos (1.9.1-1) unstable; urgency=medium
+
+  [ Bdale Garbee ]
+  * updates to Releasing based on 1.9 release process learnings
+  * doc: add flash-force instructions for TeleBT v3.0
+  * doc: add force-bootloader instructions for TeleGPS v1 and v2
+  * altos: add support for telefireeight-v2.0
+  * altos: add telefireeight-v2.0 to src/Makefile and to Releasing
+  * Makefiles, too
+  * altos: add initial support for TeleFireOne v2.0
+  * altos: ADS124S0X driver compiles with initialization code maybe completed
+  * altos: first cut of code for telefireone-v2.0
+  * doc: new TeleLaunch system manual
+  * doc: actually add the telelaunch files
+  * altos: first cut at ADS124S0X driver interrupt handling
+  * altos: fix ads124s0x data structure
+  * altos: ADS124S0X driver compiles now
+  * altos: snapshot - working on ads124x0x driver
+  * altos: ads124s0x successfully reading data
+  * add an explicit reference to Poron open-cell foam in Appendix A
+  * ao-bringup: add a turnon_telefireeight script
+  * TeleFireEight has simple green LEDs for continuity
+  * doc: add more text to TeleLaunch manual, be less sloppy with dBm assertions
+  * doc: add some text to TeleLaunch troubleshooting about SAFE/ARM on TeleFire
+  * doc: add some text about cross-bank drag race safe/arm to TeleLaunch manual
+  * altosui: add monitor idle support for TeleMetrum v3
+  * altosui: add TeleMetrum v3 to delivered firmware list
+  * altosuilib: TeleMetrum v3, like v2, doesn't use flash for config
+  * ao-bringup: add production test support for TeleMetrum v3.0
+  * start the process of releasing 1.9.1
+  * update release date in all documents
+  * update ChangeLog for 1.9.1 release
+
+  [ Keith Packard ]
+  * doc: Update all docs to 1.9. Note this in doc/RELNOTES
+  * ao-tools: Add lots of compiler warning flags to ao-tools build
+  * ao-tools: Fix warnings in ao-tools
+  * ao-tools/ao-load: Return status from 'rewrite'
+  * ao-tools/ao-cal-accel: Initialize byte count var 'l'
+  * ao-tools/ao-telem: Print out 'log_max' value. Clean up compiler warnings.
+  * Remove ao-chaosread
+  * doc: Fix typo in TeleBT v3 flash-force instructions
+  * altos: Delete unused config bits for telefireeight-v2.0. Add Makefile
+  * altos/telefireeight-v2.0: Add flash loader Makefile
+  * Use strip-nondeterminism to fix JAR timestamps
+  * altos: Fix spelling of stm_dma_ch4_5_6_isr
+  * altos/stm: Note that ao_i2c_recv_dma_isr isn't actually used
+  * altos: Mark local functions 'static'
+  * altos: Declare all public functions in header files
+  * altos: Add 'void' to function declarations with no params.
+  * altos: Stop doing pointer arith on void *
+  * altos: Remove unused ao_adc_get from ao_adc_stm.c
+  * altos: Declare task stack as union of uint8_t and uint32_t
+  * altos: Add a pile more compiler warnings
+  * stm: Expose LCD font API in ao_lcd_font.h
+  * ao-bringup: chaosread is no longer part of altos
+  * ao-tools/ao-dump-up: Document --wait flag
+  * altos/stm-demo: Make this build again after various API and CFLAGS changes
+  * altos: Add -Wshadow to CFLAGS
+  * altos/attiny: Mark 'mode' param to ao_exti_setup_port as used
+  * altos: Move common build definitions to src/Makefile.defs
+  * altos: Remove AO_LOG_STATE from ao_log_telefiretwo
+  * altos/telefireone-v1.0: Doesn't have a beeper
+  * altos/telefireone-v1.0: Clean up Makefile
+  * altos/telefireone-v1.0: Turn off USE_INTERNAL_FLASH
+  * altos/telefireone-v1.0: Set AO_LOG_FORMAT
+  * altos/telefireone-v1.0: Set various ADC values
+  * altos/telefireone-v1.0: Track ao_led_init API change
+  * altos: Build telefireone-v1.0 by default
+  * altos/telefireone-v2.0: Remove build of ao_product.h from Makefile
+  * altos: Fix ISR declarations to make them non-weak
+  * altos: Allow applications to override newlib printf selection
+  * altos: Fix several mis-specified time types
+  * altos: Change default time type to 32-bits
+  * altos: add ao_time_ns API
+  * doc: A few minor edits to telelaunch docs
+  * altos/drivers/ao_led.c: Declare LED port as void * to allow any SoC to use this code
+  * altos: ARM ABI requires 8-byte aligned stack
+  * altos/stm32f4: Add -mfloat-abi=hard compile option
+  * altos/stm32f4: Need to read-back register after clock enable
+  * altos/stm32f4: Wrong value for CK48MSEL_PLL_Q
+  * altos/stm32f4: Working on USB
+  * altos/stm32f4-disco: Remove scheme
+  * doc: Document LEDs on TeleGPS devices
+  * doc: Make sure all 'code' examples are in DejaVu Sans Mono
+  * altos: Use ao_data_accel_invert when changing orientation value
+  * altoslib: Fetch correct mag along data for EasyMega v2
+  * altoslib: Correct monitor idle IMU data for EasyMega v2
+  * altos/lambdakey-v1.0: Fix obvious build errors
+  * altos: Work on MAX6691 driver
+  * altos: get ao_max6691 driver working
+  * altos/telefireone-v2.0: Definitions needed for MAX6691 driver
+  * altos: Add MAX6691 and ADS131A0X data to ring if present
+  * altos: Change MAX6691 driver to run its own thread
+  * altos/telefireone-v2.0: Include MAX6691 data in ring
+  * altos: Add preliminary TeleStatic v3.0 code
+  * Add TeleStatic-v3.0 makefiles
+  * altos: Directly compute radio tuning values from frequency
+  * doc: Describe what sunlight does to MicroPeak and how to protect it
+  * altosui: Ship EasyMini v2.0 firwmare
+  * doc: Say 'thousands of feet' instead of '3000-4000 feet'
+  * altos: Support ao_ms5607_dump when no ms5607 task
+  * altos/micropeak-v2.0: Don't run flight code when plugged in
+  * altos/micropeak-v2.0: Wait for the power supply to stabilize before measuring
+  * altos/micropeak-v2.0: Fix LED blinking sequence at power-on
+  * altos/micropeak-v2.0: Go into standby mode after landing
+  * altoslib: Always create an ordered record set for eeprom files
+  * altosui/telegps: Display error message when attempting to graph unknown files
+  * altos/micropeak-v2.0: expose log and config commands over USB
+  * altoslib: Add support for MicroPeak v2 eeprom format
+  * altos: Don't dump MS5607 eeprom in 'B' command
+  * altos/micropeak-v2: Erase log space at end of BOOST_DELAY
+  * altos/micropeak-v2: Correct AO_LOG_ID value
+  * altos/micropeak-v2: Update .gitignore
+  * ao-tools: Change ao-eeprom into eeprom analysis tool
+  * altos: Allow ms5607 driver to either set ao_sensor_errors or panic
+  * ao-tools/ao-telem: Fix man page and usage to match code
+  * ao-tools/lib: Add atmosphere model
+  * ao-tools/ao-eeprom: Add altitude data for baro values
+  * altosuilib: Don't crash when flashing an unknown device
+  * icon: Add altosdroid-specific icon
+  * altos/stmf0: Leave power interface disabled until needed
+  * altos/stmf0: Add 'ao_serial_shutdown'
+  * altos/stmf0: Allow SPI to be powered down when idle if desired
+  * altos/micropeak-v2.0: Reduce power usage
+  * altos: Record all failed sensors and report status at power up
+  * ao-tools/ao-eeprom: Add support for TeleFireTwo
+  * altoslib: Stop using deprecated Java functionality
+  * Use discovered java path for compiler and jni include files
+  * altosdroid: Hack up build to 'work' for now
+  * altosui: Fix path to easymini-v2.0 ihx file
+  * altosui: Make it possible to disable APRS
+  * altos: Use fast timer for buttons instead of edge-triggered ISR
+  * debian: Add libjson-c4 dependency
+  * Add new altosdroid icon
+  * icon: Ignore generated LED images
+  * Add .gitignore files for new projects
+  * libaltos: gitignore btletest
+  * altosui: Display data for point nearest cursor in map view
+  * altosui: Add speed and gps height to map display data
+  * drivers: Use 'main_value' instead of 'main'
+  * altos: Replace ao_xmem functions with direct mem calls
+  * altos: Add bmx160 driver
+  * altos: Integrate BMX160 into data code
+  * altos: Add EasyMega v3.0 bits (not setup correctly yet)
+  * altos: Add missing build files for avr/attiny devices
+  * altosdroid: Update Makefile.am to run gradle-based build
+  * altos: Switch all main() to return 'int'
+  * altos: Rename 'log' in ao_log_fireone to 'ao_fireone_data'
+  * doc: Describe new 'show nearest values' in map view
+  * doc: Update for 1.9.1
+  * altoslib: Don't crash when map flight data is missing
+  * telegps: Get --graph mode working after recent changes
+  * altos/telefire: Don't arm the box if the local arm switch is off
+  * altos/test: Get test code working again after restructuring
+  * altosdroid: Make altosdroid code more resilient to weird androidisms
+  * altoslib: Don't bother adding FREETTS to CLASSPATH
+  * altos: Relabel packet receive status line for TeleFire boxes
+  * altos: Improve labeling of telefire receive packet information
+  * altoslib: Fix setting of CLASSPATH
+  * altoslib: Fix original telemetry sensor packet parsing
+  * altos: TeleMetrum v3.0 has ADXL375 and Max-8Q
+  * altoslib: Set up adxl375 for TM v3.0 in idle mode
+  * altos: Send "metrum" telemetry packets for TeleMetrum v3.0 boards
+  * ao-telem: Show all 24 bits of GPS altitude data
+  * doc: Mention TeleMetrum v3.0 in release notes for 1.9.1
+  * doc: Update docs to reference TeleMetrum v3 where appropriate
+  * altoslib: Linker script changed -> the USB desc is two bytes off
+  * altosuilib: Show the recovered product name in the Configure Rom dialog
+  * altosuilib: Wait for Windows to get ready with new device
+  * Release note about self-flashing on windows waiting for devices
+
+  [ Mike Beattie ]
+  * Remove ant build files
+  * Move java source, and resources to new paths for gradle
+  * Update files that reference new paths
+  * Add gradle build files
+  * buildinfo data comes from Makedefs now, not Version
+  * Clean up duplication in AndroidManifest.xml.in
+  * Remove versioning data from AndroidManifest.xml.in
+  * Add FOREGROUND_SERVICE permission which is now required
+  * Indentation cleanup
+  * Commented out duplicate strings
+  * Import cleanup
+  * Convert to AndroidX from support_v4
+  * Update persistent notification in TelemetryService
+  * Update Google Maps API usage.
+  * Update app to use Material Design Light theme
+
+ -- Bdale Garbee <bdale@gag.com>  Thu, 05 Dec 2019 22:45:45 -0700
+
+altos (1.9-3) unstable; urgency=medium
+
+  * cherry-pick commit that makes builds reproducible
+
+ -- Bdale Garbee <bdale@gag.com>  Sun, 03 Feb 2019 23:02:33 -0700
+
+altos (1.9-2) unstable; urgency=medium
+
+  * Revert "elide pdf files from delivered docs until ruby-asciidoctor-pdf escapes NEW"
+  * add ruby-asciidoctor-pdf to build deps
+  * cherry-pick fix for ao-cal-accel, quilt-style
+  * cherry-pick patch that fixes doc versions, quilt-style
+
+ -- Bdale Garbee <bdale@gag.com>  Fri, 04 Jan 2019 14:59:55 -0700
+
+altos (1.9-1) unstable; urgency=medium
+
+  [ Bdale Garbee ]
+  * capture changes to Releasing discovered during 1.8.7 release
+  * update turnon_telebt to use new approach for saving cal value on TeleBT
+  * doc: add bootloader force instructions for TeleBT v4.0
+  * altos: first cut at easymega v2.0 support .. nothing working yet
+  * altos: remove teleterra-v0.1, also an ancient cc1111 project
+  * altos: remove telepyro-v0.1 support, which was never completed anyway
+  * altos: remove megadongle-v0.1 support, never went beyond prototype
+  * altos: remove teledongle-v1.8 support (what was that, anyway?!?)
+  * altos: remove telescience support
+  * altos: remove usbtrng support (chaoskey prototypes)
+  * altoslib: fix computation of TeleGPS battery voltage
+  * update build depends to reflect move to asciidoctor
+  * eliminate spurious build dependencies now that we're using asciidoctor
+  * update easymega turn-on script for v2.0
+  * ao-bringup: get turnon_easymega working for v2.0
+  * changelog for 1.9 release
+  * update changelog for Debian build
+  * use ChangeLog from branch-1.9 in unmolested form
+  * need to run autoreconf before calling dh_auto_configure
+  * elide pdf files from delivered docs until ruby-asciidoctor-pdf escapes NEW
+  * update changelog for Debian build
+  * update build dependencies to include newlib-nano, elide cc1111
+  * fix dep5 copyright syntax
+  * add lintian overrides
+
+  [ Keith Packard ]
+  * altosdroid: Bump version to 18 for 1.8.7
+  * altos/stm: Make flash loader work with either 8MHz or 16MHz xtal
+  * altos: use %lu for APRS altitude in sprintf
+  * altos: Remove cc1111 products
+  * altos: Switch to newlib-nano for libc on arm
+  * Remove pdclib
+  * altos: Remove *_TO_DATA macros
+  * altos: Remove 8051 address space specifiers
+  * altos: Make cmd number parsing functions return value
+  * altos: Use stdbool true/false instead of TRUE/FALSE
+  * altos: Allow application-specific prompts for ao_cmd_readline
+  * altos: Delete random 8051 ISR declarations
+  * altos: Remove 8051-ism from ao_usb.h
+  * altos/stm32f4: Start adding support for STM32F413
+  * altos/stm32f4: Add STM32F413 disco board support
+  * altos/stm32f4: Fix clock configuration
+  * altos: Eliminate 'pin' field from GPIO functions
+  * altos: Add generic LED driver.
+  * altos/stm32f4-disco: Add .gitignore
+  * altos/stm32f4: Align stack to 8 bytes
+  * altos/stm32f4: Add usart driver for usart6
+  * altos/stm32f4: Use full printf/scanf (including floats)
+  * altos/stm32f4: Place ARM.exidx sections after .text
+  * altos/stm32f4-disco: Hook up serial console. Add scheme
+  * altos: Clean up AO_ROMCONFIG bits
+  * altos/stm32f4: Add more stm32f413 definitions and support code
+  * altos/stm32f4: Add external interrupt bits
+  * altos/stm32f4: Add stm32f413 USART support
+  * altos/stm32f4: Add start of stm32f413 USB support
+  * altos/stm32f4-disco: Start hooking up stm32f413 USB for the disco board
+  * Bump version to 1.8.7.1
+  * Remove .gitmodules
+  * altos: Remove pdclib bits from Makefile
+  * altos/drivers: Use stdbool in ao_ms5607.c
+  * altos: Create ao_data_fill shared function
+  * altos/stm: Make beeper driver support all possible tim234 configs
+  * altos/stm: Support SPI modes other than 0
+  * altos: Add ADXL375 driver [v2]
+  * altos/easymega-v2.0: Change binary to easymega-v2.0 instead of easymega-v1.0
+  * altos/easymega-v2.0: Add adxl375, replace mpu6000 with 9250 [v2]
+  * altos: Add EasyMega v2.0 to default build
+  * altoslib: Add ADXL375 support and EasyMega v2.0 support
+  * altosui: Add EasyMega v2.0 firmware to release
+  * altos/adxl375: Clean up initialization, shortening self test period
+  * altoslib: Add support for TeleGPS v2
+  * altoslib: Add support for EasyMega-v2
+  * altos/easymega-v2.0: Handle different mpu9250 orientation
+  * altoslib: When flashing hardware, pull USB data from device if needed
+  * Add keywords to .desktop files
+  * ao-tools: Spelling fixes in a couple of man pages
+  * Don't force CFLAGS from top level
+  * Generate LED icons on the fly. Include SVG versions.
+  * debian: Add cairo-5c as build dependency
+  * debian: Clean trailing whitespace in changelog
+  * debian: Switch to machine-readable copyright format
+  * debian: use dh_auto_configure instead of open-coding configuration
+  * doc: Switch to asciidoctor to format docs
+  * Remove cc1111 products from 'fat_altos' list, which is used for keithp-fat
+  * doc: Remove asciidoc related files
+  * doc: Use icons for admonitions
+  * altos: Make HAS_ACCEL_DEBUG build again
+  * altos: Don't validate ADXL375 self test for maximum value
+  * altoslib: Remove spurious debug printf in AltosCalData
+  * Add shipping products to fat_altos target, note that in Releasing
+  * doc: Update doc/RELNOTES to adapt to asciidoctor change
+  * doc: Add EasyMega v2.0 specs
+  * doc: Set doc version to 1.9
+  * doc: Add 1.9 release notes
+  * Change Releasing to reflect asciidoctor switch
+  * Update to version 1.9
+  * doc: Skip .pdf generation when asciidoctor-pdf is missing
+
+ -- Bdale Garbee <bdale@gag.com>  Wed, 02 Jan 2019 23:42:19 -0700
+
+altos (1.8.7-2) unstable; urgency=medium
+
+  * elide map-server from set of directories built and installed by
+    default.  Eventually, we'll refactor to put that in a new binary
+    package...
+
+ -- Bdale Garbee <bdale@gag.com>  Tue, 09 Oct 2018 09:55:40 -0600
+
+altos (1.8.7-1) unstable; urgency=medium
+
+  [ Bdale Garbee ]
+  * capture updates to Releasing from 1.8.6 release process
+  * altos: don't build fox1ihu by default
+  * altoslib: update launch-sites.txt location to new home at maps.altusmetrum.org
+  * add new script that uses openocd to reset an LPC target
+  * update debian/rules to reflect configuration changes needed for 1.8.7
+  * doc: correct specs for TeleMega v3.0, which still uses the MMA6555
+  * releasing 1.8.7
+  * update changelog for Debian build
+  * patches merged upstream in 1.8.7 release
+  * we need graphviz as a build-dep for 1.8.7
+  * releasing 1.8.7
+
+  [ Keith Packard ]
+  * Bump version to 1.8.6.1
+  * Include TeleMega v3.0 firmware with releases
+  * Bump java lib versions to 13
+  * altos: Remove spurious ao_mma655x_spi_index variable
+  * altos: Remove spurious 'const' from ao_state_names
+  * altos: Allow timer interrupt without needing tick count
+  * altos/lpc: Fix stdio wakeup on serial IRQ
+  * altos/stmf0: Stop using 'stdin' name as local variable
+  * altos: Switch global 'log' to 'ao_log_data'
+  * altosuilib: Add 'equals' method to AltosDevice
+  * altosuilib: Poll for devices while Select Device dialog is displayed
+  * altosuilib: Show a more useful message when the flash target device is unknown
+  * altosuilib: Don't show radio parameter when reflashing radioless devices
+  * altoslib: Use common constants for flash action messages
+  * altosuilib: Include device path in equals test of AltosUSBDevice
+  * altosuilib: Provide dialog while waiting for flash target to re-appear
+  * altoslib: Reduce debug printf spamming during flashing operation
+  * altos/drivers: Shrink ao_ms5607.c code to fit on micropeak still
+  * doc: Don't accidentally create zero-length PDF files
+  * micropeak: Add MicroUSB 'equals' method
+  * ao-tools/ao-cal-freq: Add --nosave and --output options. Check save results.
+  * altos: sdcc doesn't have 'false' and 'true'.
+  * altosui: Fetch RF calibration value for TBT v4.0 units from web
+  * ao-bringup: Add 'fix-telebt' to reflash TeleBT v4.0 with correct rf cal
+  * altoslib: Fix gyro headings in CSV files
+  * altoslib: Add missing AltosUnitInfo files
+  * doc: Describe Packet Link usage and selecting RF param defaults for TeleMini
+  * doc: Describe Packet Link mode in the initial usage section
+  * altos: Force telemetry rate to 38400 when ao_force_freq is set
+  * doc: Update for 1.8.7
+  * doc: Add check for new hardware in specs.inc
+  * macosx: Ship install-macosx script with all apps.
+  * doc: Use RELEASE_DATE to set PDF timestamps using faketime
+  * debian: build depend on faketime
+  * Add map-loading documentation
+  * map-server: Add maps proxy server
+  * altos-map: Fix altos-map HTTP syntax
+  * altos-map: Install .jar file for altos-map
+  * altos-mapd: Use command line to pass map directory in
+  * doc: Make use of 'faketime' configurable with configure.ac. Default to 'no'
+  * altoslib: Allow launch site URL to be overridden at runtime
+  * altoslib: Switch to maps.altusmetrum.org when no google map key is available
+  * altos-mapd: Add geo-fencing for map requests. Add port and key arguments
+  * altos-map: Retry connection to cache service
+  * altos-mapd: remove debug printf
+  * altos-mapd: Clean up log messages
+  * altos-mapd: Make cache service listen queue longer
+  * altos-mapd: Install altosmapd.jar file
+  * altoslib: Use https for launch-sites.txt
+  * altoslib: Change map loading to lat=&lon= from center=
+  * altosdroid: Fix offline map messages to match new meanings
+  * altoslib: Retry map connections 10 times on network failure
+  * altosuilib: Fix offline map messages to match new meanings
+  * altos-map: Support version query from application
+  * altos-mapd: Install systemd service file and defaults file
+  * altosdroid: Set offline map scale to 1
+  * altosdroid: Restore google maps key setting
+  * map-server: Implement altos-map in C
+  * altosuilib: Remove GrabNDrag.java
+  * altosui/altosdroid: Disable offline map type selections
+  * altosuilib: InputEvent.getModifiers is deprecated, use getModifiersEx
+  * altos-mapd: Handle clients failing to send valid JSON
+  * debian: Add libjansson-dev build depend
+  * altos-map: Switch from json FD ops to json FILE ops
+  * altos-mapd: Check nearest portion of tile to launch site
+  * altosui/altosdroid: Change message in forbidden map tiles
+  * altoslib: NumberFormat can't be shared between parsers
+  * altoslib: Be less chatty about map loading
+  * altosuilib: Leave some map debug code around for the future
+  * doc: Note that 1.8.7 fixes map images
+  * altos-mapd: Add --max-zoom to limit tile loading. Set default to 15.
+  * Switch to universal JavaApplicationStub for Mac OS X
+  * doc: Note fixes for Mac OS X
+  * Set version to 1.8.7
+  * ao-bringup: Use new ao-cal-freq options when flashing teledongle v3.0
+  * altos/lpc: Make sure USB pull-up is held low at boot for 'a while'
+
+ -- Bdale Garbee <bdale@gag.com>  Mon, 08 Oct 2018 21:02:16 -0600
+
+altos (1.8.6-2) unstable; urgency=medium
+
+  * quick patch to not include fox1ihu in build by default, closes: #907480
+
+ -- Bdale Garbee <bdale@gag.com>  Thu, 30 Aug 2018 21:41:00 -0600
+
+altos (1.8.6-1) unstable; urgency=medium
+
+  [ Bdale Garbee ]
+  * add a paragraph to the intro pointing to the altusmetrum email list
+  * another second seems to help on the very slow Acer laptop
+  * add a warning about Google limiting per-day access until/unless we pay
+  * altos/fox: rename fox product
+  * move signal that forces flash-loader on to PB8, active high
+  * had the sense backwards .. presence of 'attached' should put us in the loader
+  * add a turnon script for TeleLCO v2.0
+  * add telefireeight-v1.0 to products built by default in src/Makefile
+  * releasing 1.8.6
+
+  [ Keith Packard ]
+  * altos/ao_cc1120: Only call ao_packet_slave_stop when HAS_SLAVE
+  * altos: Hack up code for TeleMetrum to make it just a tracker
+  * micropeak: Make reported 'max height' value show filtered max height
+  * altosdroid: Attempt to avoid some reported altosdroid crashes
+  * doc: add release check for altusmetrum-docinfo.xml copyright
+  * altos/stm: Simplify ao_usb_write a bit
+  * altos: Use max of 64 previous orient values when checking pyro limits
+  * altos/flash-loader: On STM, don't include ao_usb_disable
+  * Set version to 1.8.5.1
+  * altoslib: Clarify terms in Mega pyro config
+  * altoslib: Remove ascending/descending from pyro config
+  * altoslib: Flush settings restoration commands after accel cal
+  * altoslib: Keep config data accel cal in antenna up form.
+  * altoslib: Fix data fetching during flashing of cc1111-based devices
+  * altos/fox: Add fox1ihu bringup firmware
+  * altos/fox: Initialize FOX adc
+  * altos/fox: Fix up Fox ADC bits
+  * altos/fox: Provide names for fox ADC channels
+  * altos/fox: Turn on all of the fox lights
+  * altos/fox: Add watchdog timer
+  * altos/fox: Enable M25 driver for MRAM.
+  * altos/fox: Add MRAM and SD card drivers
+  * altos/fox: Add fox1ihu flash loader
+  * altos/fox: Run app when PD6 is low
+  * altos/fox: update product name to show v2, enable watchdog by default
+  * altos/fox: Transition to current altos build environment
+  * altos/fox: Update ADC to fox-1 IHU Revision 2
+  * altos/fox: Enable system timer in flash loader and prod watchdog with it
+  * altos: Build fox1ihu by default
+  * Remove ao_radio_cal from stm products without radios
+  * altos/fox1ihu: Pull down radio control pin in flash loader
+  * altoslib: Fix Idle Monitor on TeleMega v3
+  * altos/stmf0: Change tests for AO_BOOT_CHAIN and AO_BOOT_PIN to #if
+  * altos/stmf0: whitespace fix
+  * altos/stmf0: Set 0x0 mapping to Main Flash for boot loader
+  * ao-bringup/turnon_telemini: Skip DFU if no DFU device is present
+  * altos/kernel: Define usb IN2/IN3 functions
+  * altos/kernel: Add USB descriptors for IN3
+  * altos/stmf0: Toggle IN2 SW_BUF bit when sending data
+  * altos/stmf0: Add IN3 alternate endpoint support
+  * altos/stmf0: Fix up USB debug code
+  * altos/chaoskey-v1.0: Add endpoint for reading flash contents
+  * ao-chaosread: Add support for the new flash endpoint in chaoskey
+  * Update version to 1.8.5.2
+  * altos: Eliminate height requirement for coast detect
+  * altos/test: Replace state name with 10* state value in test log. Fix raw speed
+  * doc: Update pyro channel info to reflect UI changes
+  * altos: Add µPusb v3.0 project
+  * altos/stmf0: leave ao_power_gpio names undefined without power management
+  * altos/mpusb-v3.0: Make it compile again
+  * altos: add 'vidtime', a simple brightness monitor
+  * altos/vidtime: Check for value change in normal code, not irq
+  * altos: Add TeleLCO v2.0 product
+  * altos/stm: Add per-LED port/pin mode in LED code
+  * altos/drivers: Pads with multi-port firing and pad selector DIP switch
+  * altos: Add TeleFireEight v1.0 product
+  * altos/telelco-v2: Change select button to alternate box/pad mode
+  * altos/ao_button.c: Support up to 16 buttons
+  * altos/telelco-v2.0: Only switch encoder mode on push, not release
+  * altos/drivers: Make quadrature debounce longer by default. Fix state tracking
+  * altos/telelco-v2.0: Reduce quadrature debounce time
+  * altos/driver: Add support for one-step-per-click quadrature encoder
+  * altos/telelco-v2.0: Use single-step quadrature code
+  * altos/telelco-v2.0: Only look at drag select presses, not releases
+  * altos/telelco-v2.0: Mixed up the select_button pin (is E0, was set to E13)
+  * altos/telelco-v2.0: Fix button names and pin mappings. Add drag LED.
+  * altos/telelco-v2.0: A bit fancier with the drag-mode LED show
+  * altos/telelco-v2.0: Add debug output for pad voltage display
+  * altos/telelco-v2.0: Change drag race selected/no-continutity pattern
+  * altos/stm: Add polling ADC sampler API
+  * altos/telelco-v2.0: Display local batt voltage at startup
+  * altos/stm: Enable HSI timer when HAS_ADC_SINGLE is set
+  * altos/telelco-v2.0: Set HAS_ADC_SINGLE to enable HSI timer
+  * altoslib: Revert field name changes for accel cal values
+  * altos/telefireeight-v1.0: Fix ADC definitions
+  * altos/telefire*: Do voltage tests in decivolts instead of ADC units
+  * altos/telelco-v2.0: Test displays at power on
+  * altos/telelco: Remove STATIC_TEST code from stand-alone LCO boxes
+  * altos/stm: Remove unused ADC names from ao_adc_single_stm.c
+  * altos/stm: Define ADC channels for TEMP and V_REF
+  * ao-bringup: Find dfu-util in $PATH for chaoskey
+  * altos/telelco-v0: Test display, show batt voltage at boot
+  * altos/driver: Improve quadrature debouncing for mechanical encoders
+  * altos/telelco-v0.2-cc1200: Add build for NAR hacked TeleLCO v0.2 board
+  * altos/telelco-v2.0: Fix AO_ADC_DUMP
+  * Bump version to 1.8.6
+  * altos/stm: Let products override AO_LED_TYPE for stm processors
+  * altos/ao_pad: Use AO_LED_TYPE for computing active LEDs.
+  * altos/ao_pad: Turn on all LEDs for a moment at power up
+  * altos/ao_pad: Move LED test to the monitor task
+  * altos/telelco-v2.0: Do all drag race beeping from the beeping thread
+  * altosuilib: Split cc1111 vs arm telefire/telemini for flashing
+  * altos/test: Compute and show height error tracker in ao_flight_test
+  * altos: Share common LCO functions in ao_lco_bits.c
+  * altos: Build telelco-v2.0 by default
+  * altos: A bit more LCO code sharing
+  * altos: Fix telelcotwo build for new ao_lco_bits.c file
+  * altos: Fix LCO display while searching
+  * altos: Make LCO search directly drive pad/box displays
+  * altos: Make fewer LCO variables public
+  * altos: Fetch current quadrature status at startup time
+  * altoslib: Make stop_remote delay depend on the data rate
+  * ao-tools/ao-dumplog: Dump entire eeprom contents
+  * altos: Change 'after motor' pyro check to be >= instead of ==
+  * altos/stm-demo: Set up for dumping eeprom
+  * altos/plottest: Make linewidth bigger
+  * altos: Add separate 'ao_launch_tick'. Use in pyro and lockout.
+  * Update docs for 1.8.6
+
+ -- Bdale Garbee <bdale@gag.com>  Sun, 05 Aug 2018 11:25:17 +0800
+
+altos (1.8.5-1) unstable; urgency=medium
+
+  [ Bdale Garbee ]
+  * update Releasing with wisdom from 1.8.4 release process
+  * need to push telegps-v2.0 loader .bin file to corporate repo, too
+  * doc: update copyright year in doc/altusmetrum-docinfo.xml
+  * preparing to release 1.8.5
+
+  [ Keith Packard ]
+  * altos/scheme: Add separate floor-quotient builtin
+  * altos/scheme: Pull out per-frame vals while printing list of frames
+  * altos/scheme: Add support for hex, octal and binary constants
+  * altos/scheme: support %x format for scheme printf
+  * altos/scheme: fix parsing of vector followed by list
+  * altos/scheme: Add start/end args to vector->list
+  * altos/scheme: Make for-each tail recursive
+  * altos/scheme: Make constant built pool as large as possible
+  * altos/scheme: add make-string builtin
+  * altos/scheme: Fix macro-detection debugging
+  * altos/scheme: Add builtin list-tail
+  * altos/scheme: Allow make-vector value param to be optional
+  * altos/scheme: Accept more escaped character constants
+  * altos/scheme: Add vector and string funcs. Test everybody.
+  * altos/scheme: add 'install' target to install both test and tiny test
+  * altos/scheme: Add ports. Split scheme code up.
+  * altos/lambdakey-v1.0: Switch back to command buffered input
+  * altos/kernel: Use ao_put_string for syntax error message
+  * altos/stmf0: Remove packet counters from non-debug build
+  * altos/stmf0: Stop shadowing USB tx buffers in system RAM
+  * altos/stmf0: Use double buffering for USB tx data
+  * altos/stmf0: use double buffering for USB rx data
+  * ao-chaosread: add --raw and --cooked flags
+  * altos/stmf0: Use double buffering for ChaosKey
+  * altos/scheme: Split tests out from build sources
+  * altos/scheme: Allow individual lisp keywords to be feature-conditional
+  * altos/scheme: remove debug code from vector write
+  * altos/lambdakey-v1.0: Add LED function back in
+  * altos/scheme: Allow unicode in lexer
+  * altos/scheme: Move ao-scheme to a separate repository
+  * altoslib/altosuilib: Validate rom image is for target device
+  * libaltos: Use case-insensitive compare when matching BT MACs
+  * Add TeleGPS v2.0 binaries to distribution
+  * ao-bringup: Don't wait for user when testing EasyMini igniters
+  * chaoskey: Create unified ROM image with both loader and app
+  * ao-bringup: Check for Loader USB id before attempting dfu-util
+  * ao-usbload: Flip product names in loader error message
+  * altos: Make panic beeps use fixed frequencies
+  * altos/stmf0: Add some common definitions for flash loaders
+  * doc: Add release notes for 1.8.5
+  * Bump version to 1.8.5
+
+ -- Bdale Garbee <bdale@gag.com>  Sun, 18 Mar 2018 15:50:54 -0600
+
+altos (1.8.4-1) unstable; urgency=medium
+
+  [ Bdale Garbee ]
+  * update Releasing with changes discovered in 1.8.3 release process
+  * releasing 1.8.4
+
+  [ Keith Packard ]
+  * doc: Don't 'publish' release notes, don't build pdf release notes
+  * altos/scheme: Add ao_scheme_vector.c
+  * altos/scheme: Support scheme subsetting via feature settings
+  * altos/lambdakey-v1.0: Get this building again
+  * altos/kernel: Allow ao_cmd to be built without tasking
+  * altos/stm: Align 'data' to 8 bytes, just like textram
+  * altos/scheme: apply const to places taking const strings.
+  * altos/scheme: More compiler warning cleanups
+  * altos/scheme: Use direct calls from frame to frame_vals mem functions
+  * altos/scheme: inline some mem calls to reduce stack usage.
+  * altos/lambdakey-v1.0: Make stack larger
+  * altos/scheme: integer? is builtin on all versions
+  * altos/scheme: swap BIGINT and STRING types
+  * altos/lambdakey-v1.0: shrink scheme code to fit the ROM
+  * ao-bringup/test-chaoskey: Make finding most recent device more reliable
+  * altos/scheme: Use AO_SCHEME_IS_CONS in cons memory funcs
+  * altos/scheme: Use memory manager mark code to note recursive print
+  * altos/scheme: abort when we try to print an invalid value
+  * altos/scheme: rearrange debugging defines
+  * altos/scheme: Work around gcc 7.2.0 optimization bug in memory manager
+  * altos/scheme: Compile scheme test with -O3
+  * altos/scheme: Rework display/write code
+  * altos/scheme: apply also needs to not free value list on lambdas
+  * altos/scheme: (define (foo . bar)) has a pair, not list as card
+  * altos/scheme: Clean up test CFLAGS
+  * altos/scheme: Don't optimize ao_scheme_make_const
+  * altos/scheme: ao_scheme__cons -> ao_scheme_cons
+  * altos/scheme: AO_SCHEME_IS_CONS -> ao_scheme_is_cons
+  * altos/scheme: Replace memory pool macros with inlines
+  * altos/scheme: Replace per-type indexed stash with poly stash heap
+  * altos/lambdakey-v1.0: Add back and/or macros
+  * altos/easymini-v2.0: Adapt to final hardware pin assignment changes
+  * ao-bringup: turnon_easymini was left with dfu_util disabled
+  * altos/attiny: Add ADC implementation
+  * altos/micropeak: Remove all compiler results
+  * Doc updates for version 1.8.4
+  * Bump for version 1.8.4
+
+ -- Bdale Garbee <bdale@gag.com>  Thu, 21 Dec 2017 19:07:43 -0700
+
+altos (1.8.3-1) unstable; urgency=medium
+
+  [ Bdale Garbee ]
+  * be more aggressive about removing and ignoring .mdwn files
+  * tweak Releasing based on 1.8.2 release experience
+  * don't exit on dfu-util errors, it's not reliable about reporting success
+  * handle repeated invocations without failing as often
+  * moving to TeleMega v3.0 by default
+  * TeleMega v3.0 turnon scripts
+  * take telescience out of the routine builds
+  * TeleMega default is now v3.0
+  * releasing 1.8.3
+
+  [ Keith Packard ]
+  * altoslib: Add tilt and pyro data to CSV export
+  * altosuilib: Don't drain voice when terminating display
+  * altoslib,altosuilib,altosui: log_format/device_type TeleGPS selects stateless
+  * altos: Allow pyro config name to end with newline, not just space/tab
+  * altoslib: Allow early bail-out on bad telemetry CRC
+  * altosuilib: Show raw tick values in graph and info table
+  * altoslib: Add user-selectable filter width for data smoothing
+  * altoslib: Adapt KML output to make TRA record people happier
+  * altosuilib: Add 'show marker' button to graphs
+  * altoslib: Missing file for filter additions.
+  * Set version to 1.8.2.1
+  * altos: Stop storing pyro fired status in config block
+  * altos: Add MPU9250 driver (accel/gyro only for now)
+  * altoslib: Allow gps time later than requested if it's first
+  * altoslib: Don't crash if there's no GPS coord to write KML
+  * altoslib: Fix time series filter window computation
+  * altos: Add MPU9250 support to self test and data
+  * altoslib: Report un-adjusted ground accel in idle IMU monitor
+  * altoslib: Save separate config for local and remote. Use in idle
+  * altoslib: Move temp GPS API from cal_data to data_listener
+  * altos: Remove cross-block storage I/O on cc1111
+  * altos: Define AO_LOG_FORMAT in */ao_pins.h. Use in ao_cmd.c
+  * altos: Share common logging code. Deal with corrupt initial flight records
+  * altos: whitespace cleanup in ao_adc_stm.c
+  * altos/stm: Add AO_EXTI_MODE_PULL_NONE
+  * altosuilib: New line styles and colors for graphs. Selectable line width
+  * altos/test: Adapt flight test to int16_t flight number type
+  * altoslib: Don't write KML record when height data is missing
+  * altoslib: Remove spurious semicolon in AltosReplayReader.java
+  * altoslib: Improve EEprom download
+  * altos: Fix inverted test for corrupt flight log
+  * altos: Fix new GCC warnings
+  * doc: Update for 1.8.3
+  * altos/lisp: Add non-cons cdr support
+  * altos/lisp: Add scheme-style bools (#t and #f)
+  * altos/lisp: Add 'else' sematics to cond
+  * altos/lisp: More schemisms
+  * altos/test: Get lisp test building using Makefile-inc
+  * altos/lisp: Lots more scheme bits
+  * altos/test: More lisp test Makefile fixes
+  * altos/lisp: Generate built-in lambda atoms for const creation
+  * altos/lisp: Character consts. String and assoc builtins.
+  * altos/lisp: Add apply
+  * altos/lisp: Finish first pass through r7rs
+  * altos/test: Add jiffy funcs to lisp test
+  * altos/cortexelf-v1: Make lisp compile again
+  * altos/lisp: Add 'big' ints -- 24 bits wide
+  * altos/lisp: Fix some scheme compat issues
+  * altos/lisp: Add floats
+  * altos/test: Update to build altos lisp test app
+  * altos/lisp: Rename progn to begin
+  * altos/lisp: Add quasiquote
+  * altos/lisp: Fix pairp builtin
+  * altos/lisp: return from unmatched cond is #f, not nil
+  * altos/lisp: Make let distinct from let*
+  * altos/lisp: Split out frame vals from frame struct
+  * altos/lisp: split set/def. Add def support to lambdas
+  * altos/kernel: MPU9250 support
+  * altos: Add TeleMega v3.0
+  * altos: Build TeleMega v3.0 by default
+  * altoslib: Add support for TeleMega v3.0 log files
+  * altos/lisp: Overflow int computations to float
+  * altos/lisp: Convert more builtin lisp code to scheme format
+  * altos/lisp: use strtof instead of atof
+  * altos/lisp: Split out read debug, add memory validation
+  * altos/lisp: Check only cdr base type when moving cons cells
+  * altos/lisp: Fix stash usage across frame allocation
+  * altos/lisp: Switch to scheme formal syntax for varargs
+  * altos/scheme: Rename to 'scheme', clean up build
+  * altos/scheme: Move scheme test program to scheme sub-directory
+  * altos/scheme: Add explicit dependency on ao_scheme_builtin.h for ao_scheme_make_const
+  * altos/cortexelf-v1: Adapt to lisp->scheme name change
+  * altos/drivers: Start adding defines to get mag data out of MPU9250
+  * altos/scheme: Let readline know if there's a list in progress
+  * altoslib: Fix 8 to 12 bit conversion for Mega pyro voltage data
+  * altos/scheme: Fix name of constant scheme file
+  * altos/scheme: Add vectors
+  * altos/scheme: Avoid crashing with non-list in length
+  * altos/scheme: Add a bunch of string and vector builtins
+  * altos/scheme: Use 64-bit ints to track memory allocation stats
+  * altos/scheme: add list-copy
+  * altos/scheme: Stash cons across value allocation in compare
+  * altos/scheme: Make eqv? work for numbers and strings
+  * altos/scheme: Make test scheme app heap maximum size
+  * altos/scheme: Add Makefile for scheme test app
+  * altos/lambdakey-v1.0: Switch to newlib, get things compiling again
+  * altos: Add scheme for stm discovery board demo
+  * altos: Allow building with newlib + avr stdio on ARM
+  * altos/scheme: Allow ao_scheme_read_eval_print to be restarted
+  * altos/drivers: Hook up mag sensor for MPU9250
+  * doc: Note TeleMega v3.0 support in 1.8.3 relnotes
+  * Bump to version 1.8.3
+  * altos: Remove more software for hardware prototypes
+  * altos: Actually store current MPU9250 data in data ring
+  * altoslib: Keep old GPS values when updating data
+  * doc: Update release notes and docinfo for 1.8.3
+
+ -- Bdale Garbee <bdale@gag.com>  Mon, 11 Dec 2017 21:40:10 -0700
+
+altos (1.8.2-1) unstable; urgency=medium
+
+  [ Bdale Garbee ]
+  * a few tweaks to the Releasing document based on experience with 1.8.1
+  * need to capture .bin file for telebt-v4.0 loader
+  * deal with cheap BT dongle that shows multiple copies of unit in lescan output
+  * publish support for TeleGPS v2.0
+  * production TeleGPS v2.0 use a 16Mhz crystal for the SOC
+  * be more aggressive about removing and ignoring .mdwn files
+  * releasing 1.8.2
+
+  [ Keith Packard ]
+  * Bump to version 1.8.1.1/android 16 for altosdroid
+  * altosui: Accel calibration UI
+  * ao-tools/ao-chaosread: Add -Wall -Wextra, clean up results
+  * altoslib: Correctly parse IMU cal data
+  * altoslib: Remove debug stack dump from AltosState
+  * altoslib: Make receive frequency available in telem data
+  * altosdroid: Display serial, call, freq in tracker list
+  * altosui: Remove debug printfs in FC config UI
+  * altosui: Handle missing GPS when graphing mega/metrum data
+  * doc: Add forward reference from 'idle' description to idle entry steps.
+  * chaoskey: Wait for input data to stabilize before using it
+  * altos: Fix debug printf in ao_pyro for state >=
+  * altos/test: Handle new eeprom file format. Give up on telem files.
+  * altosuilib: Make steps in accel cal default button
+  * test/ao_flight_test: Show recorded pyro firing
+  * telegps: Fix up TeleGPS UI bits after accel cal changes
+  * altoslib: Avoid crashing when computing stats for empty flight logs
+  * altos/telegps-v2.0: Enable USB connect monitoring
+  * Add short section on accelerometer calibration
+  * Update docs for 1.8.2 release
+  * Update release version and date
+
+ -- Bdale Garbee <bdale@gag.com>  Mon, 18 Sep 2017 20:48:07 -0600
+
 altos (1.8.1-2) unstable; urgency=medium
 
   * updating packaging to resolve outstanding lintian issues
@@ -2983,14 +4875,14 @@ altos (1.1-1) unstable; urgency=low
   * new upstream minor release, which provides a few new features in AltosUI
     and the AltOS firmware, and fixes bugs
     - Add apogee-lockout value. Overrides the apogee detection logic to
-      prevent incorrect apogee charge firing.  A configuration menu 
+      prevent incorrect apogee charge firing.  A configuration menu
       provides a list of reasonable values, or the value can be set by hand.
-    - Fix a bug where the data reported in telemetry packets was from 
+    - Fix a bug where the data reported in telemetry packets was from
       320ms ago.
     - Force the radio frequency to 434.550MHz when the debug clock
       pin is connected to ground at boot time. This provides a way
       to talk to a TeleMini which is configured to some unknown frequency.
-    - Provide RSSI values for Monitor Idle mode. This makes it easy to check 
+    - Provide RSSI values for Monitor Idle mode. This makes it easy to check
       radio range without needing to go to flight mode.
     - Fix a bug which caused the old received telemetry packets to
       be retransmitted over the USB link when the radio was turned
@@ -3066,7 +4958,7 @@ altos (1.0.1) unstable; urgency=low
   [ Bdale Garbee ]
   * use multimaint-merge to make Debian changelogs less ugly
   * update TeleMini turnon script now that we've made a stable firmware release
-  * moving git-buildpackage config into .git/ since it is fairly specific to 
+  * moving git-buildpackage config into .git/ since it is fairly specific to
     Bdale's build environment, and doesn't need to be in the source package
   * get ready for a 1.0.1 release
   * update changelogs for Debian build
@@ -3188,14 +5080,14 @@ altos (1.0) unstable; urgency=low
   * prepare to release
   * don't deliver sources.list fragment in official Debian packages
   * changes in preparation for upload to Debian
-  * ao-view is no longer included in the altos package, so have the 
+  * ao-view is no longer included in the altos package, so have the
     old-style Debian menu entry point to altosui instead
   * rewind packaging changelog to last tagged version
   * update desktop file for consistency with package section
   * we need a main category in the desktop file
   * really, I mean it, no longer deliver the sources.list fragment
-  * add a postinst to remove sources.list.d fragment delivered by old 
-    private versions of this package, no longer needed once we have 
+  * add a postinst to remove sources.list.d fragment delivered by old
+    private versions of this package, no longer needed once we have
     official packages
 
  -- Bdale Garbee <bdale@gag.com>  Thu, 25 Aug 2011 02:22:21 -0600
@@ -4787,4 +6679,3 @@ altos (0.5+77+gc57bd7f) unstable; urgency=low
   * build for Debian from git
 
  -- Bdale Garbee <bdale@gag.com>  Mon, 12 Oct 2009 15:57:19 -0600
-